Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-17T14:54:46.433Z Has data issue: false hasContentIssue false
  • English
  • Français

Micromechanics-Based Modeling of Biological Tissues Using the High-Fidelity Generalized Method of Cells

Published online by Cambridge University Press:  01 February 2011

Marek-Jerzy Pindera
Marek-Jerzy Pindera*
Affiliation:
Civil Engineering Department, University of Virginia Charlottesville, Virginia 22904–4742
Get access

Abstract

The fundamental problem of micromechanics is the prediction of overall response of a composite material given the properties or response of the individual constituents and their internal geometric arrangement. The recently developed High-Fidelity Generalized Method of Cells is a promising micromechanics model whose predictive capability has been demonstrated for infinitesimal deformations in the presence of inelastic constituent behavior. The extension of this micromechanics model to the finite-deformation regime and incorporation of the quasi-linear viscoelasticity theory for the constituent response extends the range of this model's applicability to the bio-engineering area. Herein, an application involving the response of mitral valve chordae tendineae is presented that demonstrates the model's capability to mimic experimentally-observed response of this class of biological tissues rooted in their characteristic microstructures.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 844: Symposium Y – Mechanical Properties of Bio-Inspired and Biological Materials , 2004 , Y4.5
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Aboudi, J., Pindera, M-J, and Arnold, S. M., J. Applied Mechanics, 68, 697–707 (2001).Google Scholar
2. Aboudi, J., Pindera, M-J, and Arnold, S. M., Int. J. Plasticity, 19, 805–847 (2003).Google Scholar
3. Aboudi, J., Pindera, M-J., and Arnold, S. M., Composites: Part back, 30B, 777–832 (1999).Google Scholar
4. Aboudi, J., Int. J. Solids & Structures, 39, 2587–2612 (2002).Google Scholar
5. Aboudi, J. and Pindera, M-J., Mathematics and Mechanics of Solids, 9, 599–628 (2004).Google Scholar
6. Aboudi, J., “High-Fidelity Micromechanical Modeling of Viscoelastic Multiphase Materials Undergoing Finite Deformations: Theory,” EMC Report No. 2003–01, Engineered Materials Concepts, LLC, Charlottesville, Virginia.Google Scholar
7. Pindera, M-J and Aboudi, J., “High-Fidelity Micromechanical Modeling of Viscoelastic Multiphase Materials Undergoing Finite Deformations: User's Guide and Model Validation,” EMC Report No. 2003–02, Engineered Materials Concepts, LLC, Charlottesville, Virginia.Google Scholar
8. Liao, J., “Mechanical and Structural Properties of Mitral Valve Chordae Tendineae,” PhD Dissertation, Cleveland, State University (2003).Google Scholar