Hostname: page-component-78c5997874-8bhkd Total loading time: 0 Render date: 2024-11-17T16:34:08.592Z Has data issue: false hasContentIssue false
  • English
  • Français

In Situ Study of Dislocation Behavior in Columnar Al Thin Film on Si Substrate During Thermal Cycling

Published online by Cambridge University Press:  10 February 2011

Charles W. Allen ,
Herbert Schroeder  and
Jon M. Hiller
Charles W. Allen
Affiliation:
Materials Science Division, Argonne National Laboratory, Argonne, IL 60439allen@aaem.amc.anl.gov
Herbert Schroeder
Affiliation:
Institute für Festkörperforschung, Forschungszentrum Jülich GmbH, 52425 Jülich, Germany
Jon M. Hiller
Affiliation:
Madison Area Technical College, Madison, WI. 53704
Get access

Abstract

In situ transmission electron microscopy (150 kV) has been employed to study the evolution of dislocation microstructures during relatively rapid thermal cycling of a 200 nm Al thin film on Si substrate. After a few thermal cycles between 150 and 500°C, nearly stable Al columnar grain structure is established with average grain less than a μm. On rapid cooling (3–30+ °C/s) from 500°C, dislocations first appear at a nominal temperature of 360–380°C, quickly multiplying and forming planar glide plane arrays on further cooling. From a large number of such experiments we have attempted to deduce the dislocation evolution during thermal cycling in these polycrystalline Al films and to account qualitatively for the results on a simple dislocation model.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 594: Symposium V – Thin Films - Stresses & Mechanical Properties VIII , 1999 , 123
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Keller, R.- M., Sigle, W., Baker, S. P., Kraft, O., and Arzt, E., Mat. Res. Soc. Symp. Proc. 436 (1997) 221–226.Google Scholar
[2] Venkatraman, R., Bravman, J. C. and Nix, W. D., J. Electronic Materials 19 (1990) 1231–1237 Google Scholar
[3] Heinen, D., Schroeder, H., and Schilling, W., Mat. Res. Soc. Symp. Proc. 473 (1997) 375–380.Google Scholar
[4] Frost, H. J., Mat. Res. Soc. Symp. Proc. 265 (1992) 3–14.Google Scholar
[5] Burges, U., Helneder, H., Körner, H., Schroeder, H., and Schilling, W., Mat. Res. Soc. Symp. Proc. 338 (1994) 247–252.Google Scholar
[6] Hirth, J. P. and Lothe, J., Theory of Dislocations (McGraw-Hill, New York, 1968) p. 99.Google Scholar
[7] Burges, U., Thesis, RWTH Aachen, Germany, 1995; published as: Report of the Forschungszentrum Jilich GmbH, Jülich, Germany (Report Jül-3112, Sept. 1995).Google Scholar