Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-17T16:38:25.096Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrical Performance Of an N-Channel TFT Fabricated on a Quartz Substrate by ZMR

Published online by Cambridge University Press:  10 February 2011

Si-Woo Leeo ,
Seung-Ki Joo ,
Byung-Il Lee  and
In-Gon Lim
Si-Woo Leeo
Affiliation:
Basic Research Team, Samsung Electronic Co. Ltd., 449-900
Seung-Ki Joo
Affiliation:
Electronic Material Laboratory, Dept. of Metall. Eng., Seoul Nat'l Univ., Seoul, 151-74
Byung-Il Lee
Affiliation:
Electronic Material Laboratory, Dept. of Metall. Eng., Seoul Nat'l Univ., Seoul, 151-74
In-Gon Lim
Affiliation:
Device and Material Laboratory, LG Electronics Research Center, Seoul, 137-140
Get access

Abstract

Single crystalline silicon thin films were formed on a transparent quartz substrate by zone melting recrystallization for the application of flat panel display. The recrystallized film shows a perfect (100) texture and the main defects are subgrainboundaries. High residual tensile stress, which can cause the film cracking, can be successfully eliminated by post-annealing. The nchannel thin film transistors fabricated on a recrystallized film showed excellent device characteristics: carrier mobility ˜ 420cm2/Vsec, subthreshold slope ˜ 100mV/dec and off-state leakage current < 0.2pA.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 424: Symposium H – Flat Panel Display Materials II , 1996 , 153
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Okumura, F. and Sera, K., AMLCD Digest of Technical Papers, 94, 24(1994).Google Scholar
[2] Salerno, J.P., SID Int. Display Res. Conf., 94, 39(1994).Google Scholar
[3] Sarma, K.R., Rogers, C. and Chanley, C., SID Digest of Technical Papers, XXV, 419(1994).Google Scholar
[4] Fan, J.C.C., Tsaur, B.Y. and Geis, M.W., J. Cryst. Growth, 63, 453(1983).Google Scholar
[5] Lemons, R.A., Bosch, M.A. and Herbst, D. in Laser-Solid Interactions and Transient Thermal Processing of Materials, edited by Narayan, J., Brown, W.L. and Lemons, R.A. (Mater. Res. Soc. Proc. 13, Boston, MA, 1982) pp. 581–592 Google Scholar