Hostname: page-component-848d4c4894-nmvwc Total loading time: 0 Render date: 2024-06-22T23:24:34.555Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Er/O-doped Si-LEDs with Low Thermal Quenching

Published online by Cambridge University Press:  01 February 2011

A. Karim ,
W.-X. Ni ,
A. Elfving ,
P.O.Å. Persson  and
G.V. Hansson
A. Karim
Affiliation:
Department of Physics and Measurement Technology, Linköping University, SE-58183 Linköping, Sweden.
W.-X. Ni
Affiliation:
Department of Physics and Measurement Technology, Linköping University, SE-58183 Linköping, Sweden.
A. Elfving
Affiliation:
Department of Physics and Measurement Technology, Linköping University, SE-58183 Linköping, Sweden.
P.O.Å. Persson
Affiliation:
Department of Physics and Measurement Technology, Linköping University, SE-58183 Linköping, Sweden.
G.V. Hansson
Affiliation:
Department of Physics and Measurement Technology, Linköping University, SE-58183 Linköping, Sweden.
Get access

Abstract

Electroluminescence studies of MBE-grown Er/O-doped Si-diodes at reverse bias have been done. For some devices there is much reduced thermal quenching of the emission at 1.54 νm. There are examples where the temperature dependence is abnormal in that the intensity for a constant current even increases with temperature up to e.g. 80 °C. These devices have been studied with cross-sectional transmission electron microscopy to see the microstructure of the Er/O-doped layers as well as the B-doped SiGe-layers that are used as electron emitters during reverse bias. Although there are defects in the layers there is no evidence for large thick precipitates of SiO2. While reduced thermal quenching often is attributed to having the Er-ions within SiO2 layers, this is not the case for our structures as evidenced by our TEM-studies. The origin of the abnormal temperature dependence is attributed to the two mechanisms of breakdown in the reverse-biased diodes. At low temperature the breakdown current is mainly due to avalanche resulting in low-energy electrons and holes that quenches the intensity by Auger deexcitation of the Er-ions. At higher temperature the breakdown current is mainly phonon-assisted tunneling which results in a more efficient pumping with less de-excitation of the Er-ions. Finally at the highest temperatures the thermal quenching sets in corresponding to an activation energy of 125 meV, which is slightly lower than 150 meV that has been reported in other studies.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 866 , 2005 , V4.2/FF4.2
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Ennen, H, Schneider, J, Pomrenke, G and Axmann, A 1983 Appl. Phys. Lett. 43 943 Google Scholar
[2] Ennen, H, Pomrenke, G, Axmann, A, Eisele, K, Haydl, W and Schneider, J 1985 Appl. Phys. Lett. 46 381 Google Scholar
[3] Franzo, G., Coffa, S., Priolo, F. and Spinella, C., J. Appl. Phys. 81, 2784, (1997).Google Scholar
[4] Franzo, G., Priolo, F., Coffa, S., Polman, A. and Carnera, , Appl. Phys. Lett. 64, 2235, (1994)Google Scholar
[5] Zheng, B., Michel, J., Ren, F. Y. G., Kimerling, L. C., Jacobson, D. C., and Poate, J. M., Appl. Phys. Lett. 64, 2842 (1994)Google Scholar
[6] Reittinger, A., Stimmer, J., and Abstreiter, G., Appl. Phys. Lett. 70, 2431 (1997)Google Scholar
[7] Hansson, G. V., Ni, W.-X., Du, C.-X., Elfving, A., and Duteil, F. Appl. Phys. Lett. 78, 2104 (2001)Google Scholar
[8] Emel'yanov, A. M., Sobolev, N. A., Yakimenko, A. N., Appl. Phys. Lett. 72, 1223 (1998)Google Scholar
[9] Bresler, M. S., Gusev, O. B., Pak, O. E., and Yassievich, I. N., Appl. Phys. Lett. 75, 2617 (1999)Google Scholar
[10] Sze, S. M, Physics of Semiconductor Devices, 2nd edition (Wiley, New York, 1982) pp. 96–108 Google Scholar
[11] Coffa, S., Franzo, G., Priolo, F., MRS Bulletin, 23, 25, (1998)Google Scholar
[12] Du, C-X., Ni, W-X., Joelsson, K.B., Duteil, F., Hansson, G.V.. Optical Materials 14, 259 (2000)Google Scholar
[13] Kveder, V., Badylevich, M., Steinman, E., Izotov, A., Seibt, M., and Schröter, W. Appl. Phys. Lett. 84, 2106 (2004)Google Scholar
[14] Sveinbjörnsson, Einar Ö. and Weber, Jörg. APL Appl. Phys. Lett 69 2686 (1996)Google Scholar
[15] Benton, J.L., Michel, J., Kimerling, L.C., Jacobson, D.C., Xie, Y-H., Eaglesham, D.J., Fitzgerald, E.A. and Poate, J.M.. J. Appl. Phys, 70, 2667, (1991)Google Scholar
[16] MRS Bull. 25(6), (2000) special issue on defects and diffusion in silicon technology; especially N. Cowern and C. Rafferty, ibid., p. 39 Google Scholar
[17] Fahey, P. M., Griffin, P. B., and Plummer, J. D., Rev. Mod. Phys. 61, 289 (1989)Google Scholar