Skip to main content Accessibility help
×
Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-09T03:33:02.724Z Has data issue: false hasContentIssue false

12 - Housing case studies

Published online by Cambridge University Press:  03 February 2010

Get access

Summary

Introduction

This chapter takes the reader through some of the design processes which occurred during the planning of several low-energy houses. The Peterborough Houses are complex, having large air-heating solar collectors, a sophisticated ductwork system and microprocessor control. The Newnham Houses are more conventionally heated, but highly insulated. These new dwellings are discussed in Section 12.2, and in 12.3 reference is made to the rehabilitation of existing houses, including one with a passive roof-space solar collector.

New houses – three solar abdicated houses in Peterborough

The authors won a competition at the 1979 National Energy Show, for a terraced low-energy house, designed with Lucy Krall, shown in Fig. 12.1. Peterborough Development Corporation became interested after seeing the model on television and suggested that the same sort of principles could be applied to one of their houses.

In the end, a terrace of three was built, as shown in Fig. 12.2. Because a lot of domestic hot water was likely to be produced by large collectors, we felt that six-person houses should be built. Larger units also yielded a greater roof area than would smaller terraced houses. In fact, in order to provide a reasonably large area (32 m! gross), collectors were also placed on the first-storey walls.

In retrospect, this idea of dual slope collectors was probably influenced by the Autarkic House (Fig. 12.3) in which the architectural design forced the provision of collectors on three azimuths and two tilts. The whole of the southerly facade in the Peterborough Houses is glazed, since the ground floor consists of a conservatory opening into the living room.

Type
Chapter
Information
Design with Energy
The Conservation and Use of Energy in Buildings
, pp. 310 - 325
Publisher: Cambridge University Press
Print publication year: 1984

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Save book to Kindle

To save this book to your Kindle, first ensure coreplatform@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

Available formats
×

Save book to Dropbox

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.

Available formats
×

Save book to Google Drive

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.

Available formats
×