In vitro rearing of honey bee larvae is ideal for bioassay studies; no honey bee stable cell lines are available. Inconsistency of internal development staging of reared larvae and a susceptibility to contamination are common problems encountered. Standardized protocols on rearing larvae in vitro to make the larvae growth and development more similar to that of natural colonies are necessary to ensure the accuracy of experimental results and promote honey bee research as a model organism. Here, we concluded that when larval fasting weight was >160 mg, the time point of gut emptying can be defined as the critical point separating the larval and prepupal stages. In this way, we can conduct precise studies on the prepupal stage, such as organ remodeling during metamorphosis. Simultaneously, we further verified that recombinant AccApidaecin in genetic engineered bacteria added to the larval diet upregulated antibacterial peptide gene expression, and did not stimulate the stress response in larvae, nor did it affect the pupation rate or eclosion rate. This demonstrated that feeding recombinant AccApidaecin can enhance the individual antibacterial ability at the molecular level.

A new enantiornithine, Musivavis amabilis n. gen. n. sp., is reported from the Lower Cretaceous Jehol Biota in western Liaoning, China. The new taxon is similar to the bohaiornithids in the robust subconical teeth, bluntly expanded omal ends of the furcula, caudolaterally oriented lateral trabeculae with triangular distal ends of the sternum, and a robust second pedal digit. Yet it differs from members of Bohaiornithidae in several features recalling other enantiornithine lineages, such as the acuminate rostral ramus of maxilla, the shape of the coracoid lateral margin, the presence of craniolateral processes on the sternum, the proportions of the manual phalanges, and the unspecialized third pedal ungual phalanx. A comprehensive phylogenetic analysis of Mesozoic birds shows that homoplasy significantly affects the reconstruction of enantiornithine relationships. When all phylogenetic characters are considered of equal weight, Musivavis is reconstructed in a lineage related to a radiation of large-bodied enantiornithines including Bohaiornithidae and Pengornithidae. Alternative scenarios based on progressive downweighting of the homoplastic characters support more basal placements of the pengornithids among Enantiornithes, but do not alter the affinity of Musivavis as a member of the “bohaiornithid-grade” group.

UUID: http://zoobank.org/617c7062-21ab-4d33-ae80-4edf5a129683

Generating designs via machine learning has been an on-going challenge in computer-aided design. Recently, deep learning methods have been applied to randomly generate images in fashion, furniture and product design. However, such deep generative methods usually require a large number of training images and human aspects are not taken into account in the design process. In this work, we seek a way to involve human cognitive factors through brain activity indicated by electroencephalographic measurements (EEG) in the generative process. We propose a neuroscience-inspired design with a machine learning method where EEG is used to capture preferred design features. Such signals are used as a condition in generative adversarial networks (GAN). First, we employ a recurrent neural network Long Short-Term Memory as an encoder to extract EEG features from raw EEG signals; this data are recorded from subjects viewing several categories of images from ImageNet. Second, we train a GAN model conditioned on the encoded EEG features to generate design images. Third, we use the model to generate design images from a subject’s EEG measured brain activity. To verify our proposed generative design method, we present a case study, in which the subjects imagine the products they prefer, and the corresponding EEG signals are recorded and reconstructed by our model for evaluation. The results indicate that a generated product image with preference EEG signals gains more preference than those generated without EEG signals. Overall, we propose a neuroscience-inspired artificial intelligence design method for generating a design taking into account human preference. The method could help improve communication between designers and clients where clients might not be able to express design requests clearly.

The impact of diet on the metabolic syndrome (MetS) and CVD has been investigated widely, but few studies have investigated the association between dietary patterns (DP) and the predicted CVD, derived from reduced rank regression (RRR). The objectives of this study were to derive DP using RRR and principal component analysis (PCA) and investigate their associations with the MetS and estimated 10-year atherosclerotic CVD (ASCVD). We used the baseline dataset from the Xinjiang multi-ethnic cohort study in China, collected from June 2018 to May 2019. A total of 14 982 subjects aged 35–74 years from Urumqi, Huo Cheng and Mo Yu were included in the analysis. The 10-year ASCVD risk was estimated using the Chinese ASCVD risk equations. The associations of DP with the MetS and 10-year ASCVD were determined using multivariable logistic regression models. In Urumqi and Mo Yu, the increased RRR DP score was associated with a higher OR of having the MetS and with a higher OR of elevated 10-year ASCVD risk. However, only the first DP determined by PCA in Urumqi was inversely associated with the MetS and elevated 10-year ASCVD risk. The prevalence of the MetS and elevated ASCVD risk in urban population is higher than that in rural areas. Our results may help nutritionists develop more targeted dietary strategies to prevent the MetS and ASCVD in different regions in China.

We present a long-term seasonal tree ring cellulose oxygen isotope (δ18Oc) time series created by analyzing four segments (S1, S2, S3, and S4) per year during the period of 1951–2009 from southeastern Tibetan Plateau. This intraseasonal δ18Oc reveals the onset and mature phase of the summer monsoon precipitation in this region. Analysis indicates that the δ18Oc of S1 has the strongest correlation with precipitation during the regional monsoon onset (29–33 pentads, May 21–June 10, r = −0.69), and the δ18Oc values for S2, S3, and S4 correlate strongly with June, July, and August precipitation, respectively. Combined δ18Oc of S2, S3, and S4 shows the most robust correlation (r = −0.82) with the mature-phase monsoon precipitation (June-July-August, JJA), passing rigorous statistical tests for calibration and verification in dendroclimatology. These results demonstrate the feasibility in using long-term intraseasonal δ18Oc to reconstruct the Asian summer monsoon's intraseasonal variations.

Direct numerical simulation is conducted to uncover the response of a supersonic turbulent boundary layer to streamwise concave curvature and the related physical mechanisms at a Mach number of 2.95. Streamwise variations of mean flow properties, turbulence statistics and turbulent structures are analysed. A method to define the boundary layer thickness based on the principal strain rate is proposed, which is applicable for boundary layers subjected to wall-normal pressure and velocity gradients. While the wall friction grows with the wall turning, the friction velocity decreases. A logarithmic region with constant slope exists in the concave boundary layer. However, with smaller slope, it is located lower than that of the flat boundary layer. Streamwise varying trends of the velocity and the principal strain rate within different wall-normal regions are different. The turbulence level is promoted by the concave curvature. Due to the increased turbulence generation in the outer layer, secondary bumps are noted in the profiles of streamwise and spanwise turbulence intensity. Peak positions in profiles of wall-normal turbulence intensity and Reynolds shear stress are pushed outward because of the same reason. Attributed to the Görtler instability, the streamwise extended vortices within the hairpin packets are intensified and more vortices are generated. Through accumulations of these vortices with a similar sense of rotation, large-scale streamwise roll cells are formed. Originated from the very large-scale motions and by promoting the ejection, sweep and spanwise events, the formation of large-scale streamwise roll cells is the physical cause of the alterations of the mean properties and turbulence statistics. The roll cells further give rise to the vortex generation. The large number of hairpin vortices formed in the near-wall region lead to the improved wall-normal correlation of turbulence in the concave boundary layer.

There is a dearth of data on the iodine balance studies of Chinese population. In the present study, we aimed to explore the appropriate recommended nutrient intake (RNI) of iodine based on healthy Chinese women. A 4-week study was conducted in twenty-five Chinese euthyroid women. Uniform diets with different iodine contents were provided in two different periods, in which non-iodised salt was given in the first 3 weeks, followed by 1 week of iodised salt administration. The total iodine intake from diet, water and air as well as the total iodine excretion through urine, faeces and respiration were monitored and determined. The sweat iodine loss was also considered. Moreover, the regression curve model was established between the 24 h iodine intake and 24 h iodine excretion. The 24 h iodine intake in the two periods was 194·8 (sd 62·9) and 487·1 (sd 177·3) μg/d, respectively. The 24 h iodine excretion was 130·9 (sd 39·5) and 265·4 (sd 71·8) μg/d, respectively. Both 24 h iodine intake and 24 h iodine excretion of the two periods were significantly different (all P<0·05). The iodised salt contributed approximately 62·7 % of the total daily iodine intake. Moreover, 92·3 % (277/300) of samples were in positive balance, while twenty-three cases were in negative balance. Our data show that the estimated average requirement for iodine was 110·5 μg/d. Therefore, the RNI for iodine to non-pregnant, non-lactating Chinese women was 154·7 μg/d.

The characteristics and mechanism for unsteady shock train motions were experimentally studied in a constant-area rectangular duct. High-speed Schlieren techniques and high-frequency pressure measurements were utilized in this research. The results show that the shock train undergoes periodical motions in response to downstream periodical excitations. The mechanism for unsteady shock train motions is that the shock train keeps changing its moving speed to change the relative Mach number ahead of shock train to match the varying back-pressure condition. It can be found that the unsteady shock train motion can be predicted well with a theoretical model, which is based on this mechanism. A correlation between the amplitude of shock train motions and some flow parameters was illustrated using an analytical equation, which was confirmed by the experimental results.

In the paper, we focus on atom diffusion behavior in Ni-based superalloys, which have important applications in the aero-industry. Specifically, the expressions of the key physical parameter – transition rate (jump rate) in the diffusion can be given from the diffusion theory in solids and the kinetic Monte Carlo (KMC) method, respectively. The transition rate controls the diffusion process and is directly related to the energy of vacancy formation and the energy of migration of atom from density functional theory (DFT). Moreover, from the KMC calculations, the diffusion coefficients for Ni and Al atoms in the γ phase (Ni matrix) and the γʹ phase (intermetallic compound Ni3Al) of the superalloy have been obtained. We propose a strategy of time stepping to deal with the multi-time scale issues. In addition, the influence of temperature and Al concentration on diffusion in dilute alloys is also reported.

Thermal stress can induce birefringence in a laser medium, which can cause depolarization of the laser. The depolarization effect will be very severe in a high-average-power laser. Because the depolarization will make the frequency doubling efficiency decline, it should be compensated. In this paper, the thermal characteristics of two kinds of materials are analyzed in respect of temperature, thermal deformation and thermal stress. The depolarization result from thermal stress was simulated. Depolarization on non-uniform pumping was also simulated, and the compensation method is discussed.

The high repetition rate 10 J/10 ns Yb:YAG laser system and its key techniques are reported. The amplifiers in this system have a multi-pass V-shape structure and the heat in the amplifiers is removed by means of laminar water flow. In the main amplifier, the laser is four-pass, and an approximately 8.5 J/1 Hz/10 ns output is achieved in the primary test. The far-field of the output beam is approximately 10 times the diffraction limit. Because of the higher levels of amplified spontaneous emission (ASE) in the main amplifier, the output energy is lower than expected. At the end we discuss some measures that can improve the properties of the laser system.

The three-dimensional instabilities of axisymmetric flow are investigated in a laterally heated vertical cylinder by linear stability analysis. Heating is confined to a central zone on the sidewall of the cylinder, while other parts of the sidewall are insulated and both ends of the cylinder are cooled. The length of the heated zone equals the radius of the cylinder. For three different aspect ratios, $A= 1.92 $, 2, 2.1 ($A=\mathrm{height}$/radius), the dependence of the critical Rayleigh number on the Prandtl number (from 0.02 to 6.7) has been studied in detail. For such a kind of laterally heated convection, some interesting stability results are obtained. A monotonous instability curve is obtained for $A= 1.92 $, while the instability curves for $A= 2 $ and $A= 2.1 $ are non-monotonous and multivalued. In particular, an instability island has been found for $A=2$. Moreover, mechanisms corresponding to different instability results are obtained when the Prandtl number changes. At small Prandtl number, the flow is oscillatory unstable, which is dominated by hydrodynamic instability. At intermediate Prandtl number, the interaction between buoyancy and shear in the base flow plays a more important role than pure hydrodynamic instability. At even higher Prandtl number, Rayleigh–Bénard instability becomes the dominant process and the flow loses stability through steady bifurcation.

A joint diagnostic system was established for the diagnosis of laser-driven shock wave experiments. The system has high temporal resolution (time resolution ~12 ps) and high spatial resolution (spatial resolution ~7 μm) and fits for diagnostics of the experiment with small sample size and short time physical process. The joint diagnostic system was applied for shock wave measurement on the Shenguang-II laser facility. The passive shock breakout signal and active diagnostic signal were simultaneously obtained. The temporal measurement reliability of the system was verified using a multi-layered target. The experimental results show that the two measurement results were consistent.

The objective of the present study was to investigate age-related differences in erythrocyte membrane fluidity (EMF) and changes in antioxidant capacity following supplementation. A total of seventy-four children were randomly divided into two groups: group A1 was the placebo-controlled group and group A2 was supplemented daily with 600 μg retinol, 1·0 mg β-carotene, 100 mg tocopherol, 300 mg ascorbic acid and 200 μg Se. A total of ninety young people were randomly divided into B1 and B2 groups, and ninety-one elderly subjects were divided into C1 and C2 groups. Groups B1 and C1 were placebo-controlled groups, and groups B2 and C2 were daily supplemented with 900 μg retinol, 1·5 mg β-carotene, 200 mg tocopherol, 500 mg ascorbic acid and 400 μg Se. Results showed that plasma malondialdehyde (MDA) was 5·35 μmol/l in children, which was lower than in young and elderly people. The MDA levels of the young and elderly individuals in the treated groups were significantly lower compared with the control groups, but the supplementation did not alter MDA levels in children. At baseline, there was a lower value of polarisation (ρ) and microviscosity (η) in children, indicating a higher EMF, than in both the young and elderly subjects. After the 2-month trial, the ρ and η values of young and elderly subjects in the treated groups decreased significantly in comparison with the placebo groups, indicating an increase in EMF. In conclusion, there was a background of higher MDA levels and lower EMF in young and elderly people than in children, which could be improved by antioxidant supplementation.

It is well known that c-Jun N-terminal kinase (JNK) plays pivotal roles in various mitotic events, but its function in mammalian oocyte meiosis remains unknown. In this study, we found that no specific JNK2 signal was detected in germinal vesicle stage. JNK2 was associated with the spindles especially the spindle poles and cytoplasmic microtubule organizing centers at prometaphase I, metaphase I, and metaphase II stages. JNK2 became diffusely distributed and associated with the midbody at telophase I stage. Injection of myc-tagged JNK2α1 mRNA into oocytes also revealed its localization on spindle poles. The association of JNK2 with spindle poles was further confirmed by colocalization with the centrosomal proteins, γ-tubulin and Plk1. Nocodazole treatment showed that JNK2 may interact with Plk1 to regulate the spindle assembly. Then we investigated the possible function of JNK2 by JNK2 antibody microinjection and JNK specific inhibitor SP600125 treatment. These two manipulations caused abnormal spindle formation and decreased the rate of first polar body (PB1) extrusion. In addition, inhibition of JNK2 resulted in impaired localization of Plk1. Taken together, our results suggest that JNK2 plays an important role in spindle assembly and PB1 extrusion during mouse oocyte meiotic maturation.