Evolution of longitudinal electrostatic wakefields, due to the propagation of a linearly polarized super-Gaussian laser pulse through homogeneous plasma has been presented via two-dimensional particle-in-cell simulations. The wakes generated are compared with those generated by a Gaussian laser pulse in the relativistic regime. Further, one-dimensional numerical model has been used to validate the generated wakefields via simulation studies. Separatrix curves are plotted to study the trapping and energy gain of an externally injected test electron, due to the generated electrostatic wakefields. An enhancement in the peak energy of an externally injected electron accelerated by wakes generated by super-Gaussian pulse as compared to Gaussian pulse case has been observed.

In this paper, the authors have presented a paraxial theory for propagation of (1) Gaussian (2) dark hollow Gaussian high power laser beams in the atmosphere, considering the nonlinearity arising from the temperature variation along the wave-front. Specifically, the focusing parameter for both beams has been evaluated as a function of distance and initial beam power and width (corresponding to radiation of wavelengths 1.045 µ, 1.625 µ, and 2.141 µ in the water absorption window) for the maritime, desert, rural, and urban environments as modeled at NRL; the results have been presented in the dimensionless form. It is seen that in all four environments a dark hollow beam defocuses less than the corresponding Gaussian beam of same radius and power. It is suggested that this conclusion based on the paraxial theory be verified by numerical simulation.

Characterization measurements and modes of operation of a novel, dual-gas multi-jet target, developed for experiments on high-order harmonic generation, are presented. The target has been formed by pulsed injection of argon through a nozzle in a form of linearly oriented small orifices. The argon jets were separated with the helium jets formed by injection of helium through alternate orifices in the nozzle. The targets have been characterized by extreme ultraviolet backlighting at 13.5 nm wavelength. Density profiles for this type of targets have been obtained, to our knowledge, for the first time.

Resonant absorption effects for 1.064 µm infrared laser pulse radiations are investigated by using different techniques producing micrometric surface structures with dimensions comparable to the wavelength value. The laser absorption is controlled through measurement of the Cu ion acceleration using time-of-flight approach. Surface treatments include low energy laser etching in air, deposition of microspheres obtained ablating Cu targets in water, pulse laser deposition of microstructures precursor of thin homogeneous film, chemical etching with HNO3 acid, Ar+ ion sputtering and rolling burnishing surface of thin Cu foils. Results indicate that the best resonance effect is obtained with the rolling burnishing, ion sputtering and microsphere deposition processes which enhance the Cu ion energy and the yield emission.

This paper studies the surface plasma wave excitation via Cerenkov and fast cyclotron interaction by a density modulated electron beam propagating through a magnetized dusty plasma cylinder. The dispersion relation of surface plasma waves has been derived and it has been shown that the phase velocity of waves increases with increase in relative density δ(= nio/ne0, where ni0 is the ion plasma density and ne0 is the electron plasma density) of negatively charged dust grains. The beam radius is taken slightly less than the radius of dusty plasma cylinder. The frequency and the growth rate of the unstable wave instability increases with increase in the value of δ and normalized frequency ω/ωpe. The growth rate of the instability increases with the beam density and scales as one-third power of the beam density in Cerenkov interaction and square root of beam density in fast cyclotron interaction. The dispersion relation of surface plasma waves has been retrieved from the derived dispersion relation by considering that the beam is absent and there are no dust grains in the plasma cylinder.

Aiming breakeven for nuclear fusion energy needs a more than 1000 times higher fusion gain. This may be achieved as the anomalously high jump of gains known from the discovery of volume ignition since 1978. This is considered for combination with the present most advanced experiments at the world highest class laser of NIF.

To study the effect of explosive field emission cathodes on high power microwave generation, experiments were conducted on a reflex triode virtual cathode oscillator. Experimental results with cathodes made of graphite, stainless steel nails, and carbon fiber (needle type) are presented. The experiments have been performed at the 1 kJ Marx generator (200 kV, 300 ns, and 9 kA). The experimentally obtained electron beam diode perveance has been compared with the one-dimensional Child-Langmuir law. The cathode plasma expansion velocity has been calculated from the perveance data. It was found that the carbon fiber cathode has the lowest cathode plasma expansion velocity of 1.7 cm/μs. The radiated high power microwave has maximum field strength and pulse duration for the graphite cathode. It was found that the reflex triode virtual cathode oscillator radiates a single microwave frequency with the multiple needle cathodes for a shorter (<200 ns full width at half maximum) voltage pulse duration.

Laser light trapping in cavities in near-critical density plasmas is studied by two-dimensional particle-in-cell simulation. The laser ponderomotive force can create in the plasma a vacuum cavity bounded by a thin overcritical-density wall. The laser light is self-consistently trapped as a half-cycle electromagnetic wave in the form of an oscillon-caviton structure until it is slowly depleted through interaction with the cavity wall. When the near-critical density plasma contains a preformed cavity, laser light can become a standing wave in the latter. The trapped light is characterized as multi-peak structure. The overdense plasma wall around the self-generated and preformed cavities induced by the laser ponderomotive force is found to be crucial for pulse trapping. Once this wall forms, the trapped pulse can hardly penetrate.

A dual-band high-efficiency coaxial relativistic backward wave oscillator (CRBWO) with asymmetric resonant reflector is designed and presented in this paper. Improved sectioned coaxial slow wave structure (SWS) with stepwise variation of coupling impedance and phase velocity is employed, and the performance of the dual-band CRBWO is investigated by use of a 2.5-D particle-in-cell (PIC) simulation code. When the diode voltage is 510 kV and beam current is 9.03 kA, an average microwave power of 1.0 GW with power conversion efficiency of 21.7% is obtained. Synchronously radiating dual-band frequencies of 8.1 GHz and 9.9 GHz are obtained, corresponding to C-band and X-band, respectively. A more clear and stable beating radiation microwave power with beating frequency of 1.8 GHz is acquired.

To increase X-ray photon number generated by laser-cluster interaction, it is important to understand the dependence of X-ray generation on cluster size. We carried out Xe K-shell X-ray generation using a conical nozzle with Xe clusters, the radius of which was controllable by adjusting the backing pressure. The experiment clarifies the result that the Xe K-shell X-ray photon number increases with increasing cluster radius from 8 to 12 nm, and saturates at the radius between 12 and 17 nm. We also investigated the Xe K-shell X-ray photon number dependence on laser intensity, and found that the threshold laser intensity of the Xe K-shell X-ray generation exists between 2 × 1017 and 5 × 1018 W/cm2.

A scheme of generating ultra-intense attosecond pulses in ultra-relativistic laser interaction with under-dense plasmas is proposed. The attosecond pulse emission is caused by an oscillating transverse current sheet formed by an electron density spike composed of trapped electrons in the laser wakefield and the residual transverse momentum of electrons left behind the laser pulse when its front is strongly modulated. As soon as the attosecond pulse emerges, it tends to feed back to further enhance the transverse electron momentum and the transverse current. Consequently, the attosecond pulse is enhanced and developed into a few cycles later until the density spike is depleted out due to the pump laser depletion. To control the formation of the transverse current sheet, a non-uniform plasma slab with an up-ramp density profile in front of a uniform region is adopted, which enables one to obtain attosecond pulses with higher amplitudes than that in a uniform plasma slab.

We investigate the influence of the initial size of the proton layer on proton acceleration in the interaction of high intensity laser pulses with double-layer targets by using two-dimensional particle-in-cell code. We discuss the influence of proton layer initial sizes on the cut-off energy, energy spread, and divergence angle of proton beam. It is found that Coulomb explosion plays an important role on the proton cut-off energy. This causes the cut-off energy to increase for increasing proton layer thickness, at the expense of energy spread. The proton divergence angle reaches a peak value and then falls again with increasing the width. Proton divergence angle grows with target thickness. It is found that there is an optimal thickness to obtain the narrowest energy spread, which may provide an effective method (change the size of proton layer) to obtain high quality proton beams. This work may serve to improve the understanding of sheath field proton acceleration.

A new inverse Compton scattering scheme for production of high-energy Gamma-ray sources is proposed in which a Giga-electronvolt (GeV) electron beam is injected into a thermal hohlraum. It is found that by increasing the hohlraum background temperature, the scattered photons experience kinematic pileup, resulting in more monochromatic spectrum and smaller scattering angle. When a relativistic electron beam with energy 1 GeV and charge 10nC is injected into a 0.5 keV hohlraum, 80% of the scattered photons have energy above 0.5 GeV.

In this paper, a new kind of solid-state Marx generator based on synchronous transformer type magnetic switches (TTMS) is put forward, and the TTMSs with new winding structures are used to substitute all the spark gaps in the traditional Marx generator for the purposes of solidification and long life time. As the new type of TTMS with high step-up ratio and low saturated inductances is employed, the proposed Marx generator becomes a compact combination of pulse transformer, magnetic switch, and Marx capacitors. The stages of the Marx capacitors can be synchronously charged in parallel before the magnetic core saturates, and these Marx capacitors also can synchronously discharge in series. The establishing time of the proposed Marx generator is at ns range. As the new type of self-reset TTMS is used, the input voltage of the Marx generator decreases to a low level less than 1 kV while the output voltage can easily reach a high level ranging from dozens of kV to hundreds of kV.

Laser induced ablation studies have been carried out on formation of amorphous carbon and graphene on SiC thin films with their detailed characterization studies. Pulse laser ablation technique with process parameters such as 248 nm KrF excimer laser, frequency 10 Hz, 200 mJ of laser energy, and chamber pressure of 7 × 10−6 mbar has been used. Films were characterized in detail by grazing incidence X-ray diffraction, Fourier transform infrared, micro-Raman, X-ray reflectivity, Field emission scanning electron microscopic, transmission electron microscope, and Nano-indentation techniques and the results are reported. As deposited SiC film surface is rich in amorphous carbon and the same has been used as the nucleation site for further growth of graphene on SiC films. Film hardness increased from 29 GPa to 37 GPa for SiC film and graphene on SiC film (C-SiC), respectively. These films show bands due to surface phonon polariton mode in the range of 810–840 cm−1 that is a research concern today in nano-photonics area. Further these materials find applications in understanding the laser irradiation effects on SiC based nuclear fusion wall material.

Plasma wakefield excited by a short TeV-scale proton beam is investigated in the highly nonlinear regime. Analysis of the “bubble” field illustrates that transverse expelling force of the wakefield can be compensated by the attractive force, which originates from the co-propagating electrons within the proton bunch, leading to a collimation effect that stabilizes the beam propagation. The protons located in the beam tail can be well-confined and accelerated forward for a long distance. Two-dimensional simulations show that after a 1-TeV proton bunch propagating through plasma for a distance, several percentages of the protons achieve a remarkable energy gain. This scheme presents a potential that proton beams from conventional accelerators may gain considerable additional energy through plasmas wakefields.

The relativistic motion of a charged particle is studied in an inhomogeneous field of finite duration laser pulse. An inhomogeneity in a laser field is due to the spatial variation of laser intensity. Such a variation in laser intensity is characteristic of focused and de-focused laser beams. In the presence of an inhomogeneity, the problem becomes non-integrable and hence particle dynamics can not be derived exactly. In the present work considering a slow variation in the laser intensity, it is shown that the particle dynamics is associated with an adiabatic invariant. It is further found that the adiabatic invariant itself evolves and in a typical example changes such that the adiabaticity parameter attains a value of order unity. Thus higher orders of invariance are required for specifying the particle dynamics in terms of an adiabatic invariant. An adiabatic formalism is derived using the Lie transform perturbation method for calculating the higher orders of invariance and to obtain the evolution of the adiabatic invariant. The estimates of energy gained by a particle considering focused laser field are obtained by solving the equation of motion numerically. On comparing the results of a numerical experiment with theoretical predictions, it is found that the energy estimates improve on taking into account higher orders of invariance predicted by the present theory.

We study the problem of the radiation pressure acceleration of ions and the formation of plasma jets, driven by a high-intensity circularly polarized laser beam normally incident on thin plasma targets. We use an Eulerian Vlasov code to solve the one-dimensional relativistic Vlasov-Maxwell equations for both electrons and ions. We consider the case of a high density plasma with n/ncr = 100, where ncr is the critical density. Three cases are studied with different target thicknesses, to investigate the physical processes involved when decreasing the target thickness from several electron skin depths down to the order of one skin depth. The results show a more important acceleration of the ions when the thickness is decreased. Although we observe in all cases a neutral plasma jet ejected from the back of the target, the evolution of the system which leads to the formation of this neutral plasma jet is different in the three cases considered. In each case, this evolution will be studied in details. Also, a leak or ejection of electrons from the back of the target is observed in the thinnest case treated (thickness of the order of the skin depth), before the formation of the neutral plasma jet, a regime called leaky light sail radiation pressure acceleration. The absence of noise in the Eulerian Vlasov code allows an accurate representation of the phase-space structures of the distribution functions.

In this research, we presented the application of picosecond terawatt laser pulses for ultrahigh acceleration of plasma blocks for fast ignition of fusion. Ultrahigh acceleration of plasma blocks after irradiation of picosecond laser pulses of around terawatt power in the range of 1020 cm/s2 was discovered by Sauerbrey (1996) as measured by Doppler effect where the laser intensity was up to about 1018 W/cm2. This is several orders of magnitude higher than acceleration by irradiation based on thermal interaction of lasers has produced. This ultrahigh acceleration resulted from hydrodynamic computations at plane target interaction in 1978 at comparable conditions where the interaction was dominated by the nonlinear (generalized ponderomotive) forces where the laser energy was instantly converted into plasma motion in contrast to slow and delayed thermal collision processes. After clarifying this basic result, the application of the plasma blocks for side-on ignition of solid density or modestly compressed fusion fuel following the theory of Chu (1971) is updated in view of later discovered plasma properties and the ignition of deuterium tritium and of proton-11B appeared possible for a dozen of PW-PS laser pulses if an extremely high contrast ratio avoided relativistic self-focusing. A re-evaluation of more recent experiment confirms the acceleration by the nonlinear force, and the generation of the fusion flame with properties of Rankine-Hugoniot shocks is reported.

This paper suggests a novel route to approach the cold compression curve in laser-plasma induced shock waves. This effect is achieved with a precompression in a diamond anvil cell (DAC). In order to keep the necessary structure of one dimensional shock wave it is required to use a diamond anvil cell with a partially perforated diamond anvil. Precompression pressures of about 50 GPa, that are an order of magnitude higher than the currently reported pressures, are possible to obtain with presentley existing diamond anvil cell technology. The precompressed Hugoniot of Al was calculated for different precompression pressures and it was found that at precompression pressure of 50 GPa the Hugoniot follows the “cold curve” up to about 2 Mbar and 5.2 g/cc. Furthermore, the thermal relative contribution on the Hugoniot curves is calculated.