We investigate by direct numerical simulations the fluid–solid interaction of non-dilute suspensions of spherical particles moving in triperiodic turbulence, at the relatively large Reynolds number of $Re_\lambda \approx 400$. The solid-to-fluid density ratio is varied between $1.3$ and $100$, the particle diameter $D$ is in the range $16 \le D/\eta \le 123$ ($\eta$ is the Kolmogorov scale) and the volume fraction of the suspension is $0.079$. Turbulence is sustained using the Arnold–Beltrami–Childress cellular-flow forcing. The influence of the solid phase on the largest and energetic scales of the flow changes with the size and density of the particles. Light and large particles modulate all scales in an isotropic way, while heavier and smaller particles modulate the largest scales of the flow towards an anisotropic state. Smaller scales are isotropic and homogeneous for all cases. The mechanism driving the energy transfer across scales changes with the size and the density of the particles. For large and light particles the energy transfer is only marginally influenced by the fluid–solid interaction. For small and heavy particles, instead, the classical energy cascade is subdominant at all scales, and the energy transfer is essentially driven by the fluid–solid coupling. The influence of the solid phase on the flow intermittency is also discussed. Besides, the collective motion of the particles and their preferential location in relation to properties of the carrier flow are analysed. The solid phase exhibits moderate clustering; for large particles the level of clustering decreases with their density, while for small particles it is maximum for intermediate values.

A global transient linear stability analysis of the three-dimensional time-dependent flow around an aerofoil undergoing small-amplitude pitching motion is performed using the optimally time-dependent (OTD) framework. The most salient linear instabilities associated with the instantaneous basic state are computed and tracked over time. The resulting OTD modes reflect the variations in the basic state and can be used as predictors of its spatial and temporal evolution, including the formation of a laminar separation bubble and its gradual spanwise modulation via primary global instability, leading to secondary instability and finally rapid breakdown to turbulence. The study confirms and expands upon earlier stability analyses of the same case based on the local properties of spanwise averaged velocity profiles in the bubble that predicted the onset of absolute instability soon followed by rapid breakdown of the separation bubble. The three-dimensional structure of the most unstable OTD mode is extracted, which compares well with both the locally absolutely unstable mode and the evolution of the basic state itself.

The Holton–Lindzen–Plumb (HLP) model of the quasi-biennial oscillation (QBO) is investigated in order to assess the impact of introducing intermittency in the wave forcing. Intermittency is introduced to HLP by allowing the amplitude of the waves which force the QBO to evolve according to a stationary random process, driven by a stochastic differential equation (SDE) with an associated time scale $\tau$. Provided that $\tau$ is much shorter than the QBO period, it is shown that the impact on the QBO of the intermittent forcing is captured by a single intermittency parameter $\lambda$, and the value of $\lambda$ is proportional to $\tau$ and otherwise depends upon the details of the SDE. Numerical simulations, using a family of mean-reverting Ornstein–Uhlenbeck processes as the choice of SDE, show that the effect of increasing the intermittency parameter is invariably to decrease the QBO amplitude and increase its period. Changes to the QBO amplitude and period are indeed found to collapse onto a single curve controlled by $\lambda$, as predicted by the theory, provided that $\tau$ is small enough for the approximations used to be valid. The extension to broadband forcing is discussed in the context of stochastic gravity wave parameterisation, with the eventual goal of developing a representation of source intermittency in the most general situation with close fidelity to the physics.

Microorganisms are ubiquitous in nature and technology. They inhabit diverse environments, ranging from small river tributaries and lakes, to oceans, as well as wastewater treatment plants and food manufacturing. In many of these environments, microorganisms coexist with settling particles. Here, we investigate the effects of microbial activity (swimming E. coli) on the settling dynamics of passive colloidal particles using particle tracking methods. Our results reveal the existence of two distinct regimes in the correlation length scale ($L_u$) and the effective diffusivity of the colloidal particles ($D_{eff}$), with increasing bacterial concentration ($\phi _b$). At low $\phi _b$, the parameters $L_u$ and $D_{eff}$ increase monotonically with increasing $\phi _b$. Beyond critical $\phi _b$, a second regime is found where both $D_{eff}$ and $L_u$ are independent of $\phi _b$. We demonstrate that the transition between these regimes is characterized by the emergence of bioconvection. We use experimentally measured particle-scale quantities $L_u$ and $D_{eff}$ to predict the critical bacterial concentration for the diffusion–bioconvection transition.

We use the entropy method to analyse the nonlinear dynamics and stability of a continuum kinetic model of an active nematic suspension. From the time evolution of the relative entropy, an energy-like quantity in the kinetic model, we derive a variational bound on relative entropy fluctuations that can be expressed in terms of orientational order parameters. From this bound we show isotropic suspensions are nonlinearly stable for sufficiently low activity, and derive upper bounds on spatiotemporal averages in the unstable regime that are consistent with fully nonlinear simulations. This work highlights the self-organising role of activity in particle suspensions, and places limits on how organised such systems can be.

We study the stability of a zero-pressure gradient boundary layer subjected to free-stream disturbances by means of local stability analysis. The dataset under study corresponds to a direct numerical simulation (DNS) of a flat plate with a sharp leading edge in realistic wind tunnel conditions, with a turbulence level of 3.45 % at the leading edge. We present a method to track the convective evolution of the secondary instabilities of streaks by performing sequential stability calculations following the wave packet, connecting successive unstable eigenfunctions. A scattered nature, in time and space, of secondary instabilities is seen in the stability calculations. These instabilities can be detected before they reach finite amplitude in the DNS, preceding the nucleation of turbulent spots, and whose appearance is well correlated to the transition onset. This represents further evidence regarding the relevance of secondary instabilities of streaks in the bypass transition in realistic flow conditions. Consistent with the spatio-temporal nature of this problem, our approach allows us to integrate directly the local growth rates to obtain the spatial amplification ratio of the individual instabilities, where it is shown that instabilities reaching an $N$-factor in the range [2.5,4] can be directly correlated to more than 65 % of the nucleation events. Interestingly, it is found that high amplification is not only attained by modes with high growth rates, but also by instabilities with sustained low growth rates for a long time.

This study proposes a self-learning algorithm for closed-loop cylinder wake control targeting lower drag and lower lift fluctuations with the additional challenge of sparse sensor information, taking deep reinforcement learning (DRL) as the starting point. The DRL performance is significantly improved by lifting the sensor signals to dynamic features (DFs), which predict future flow states. The resulting DF-based DRL (DF-DRL) automatically learns a feedback control in the plant without a dynamic model. Results show that the drag coefficient of the DF-DRL model is 25 % less than the vanilla model based on direct sensor feedback. More importantly, using only one surface pressure sensor, DF-DRL can reduce the drag coefficient to a state-of-the-art performance of approximately 8 % at Reynolds number $(Re) = 100$ and significantly mitigates lift coefficient fluctuations. Hence, DF-DRL allows the deployment of sparse sensing of the flow without degrading the control performance. This method also exhibits strong robustness in flow control under more complex flow scenarios, reducing the drag coefficient by 32.2 % and 46.55 % at $Re =500$ and 1000, respectively. Additionally, the drag coefficient decreases by 28.6 % in a three-dimensional turbulent flow at $Re =10\,000$. Since surface pressure information is more straightforward to measure in realistic scenarios than flow velocity information, this study provides a valuable reference for experimentally designing the active flow control of a circular cylinder based on wall pressure signals, which is an essential step toward further developing intelligent control in a realistic multi-input multi-output system.

When a sphere rotates near a rigid boundary coated with a thin layer of viscous liquid, ‘tracks’ are generated both behind and over the sphere. This paper describes a theory for the simplest one-track configuration which can occur under particular experimental conditions. The theoretical predictions are in good agreement with experimental observations.

We investigate the global instability mechanism of the flow past a three-dimensional stepped cylinder. A comprehensive study is performed for different diameter ratios of the two joined cylinders ($r=D/d$) ranging from $r=1.1$ to $r=4$. Independently of $r$, the spectrum of the linearised Navier–Stokes operator reveals a pair of complex conjugate eigenvalues, with Strouhal number $St \approx 0.11$. The initial transition is triggered by a two-dimensional mechanism of the larger cylinder only, not affected by the presence of the junction and the smaller cylinder ($Re_{D,cr}\approx 47$). The structural sensitivity analysis is used to identify where the instability mechanism acts. The onset of transition is solely localised in the large cylinder wake (L cell), where the wavemaker has two symmetric lobes across the separation bubble. When the Reynolds number increases, a second and a third unstable pair of complex conjugate eigenvalues appears. They are localised in the small cylinder (S) wake and modulation (N) region. For any $r$, the appearance of unstable eigenmodes resembling the three cells S–N–L in the wake is observed. The nonlinear simulation results support this finding, in contrast with the previous classification of the laminar vortex shedding in direct (L–S) and indirect (L–N–S) modes interaction Lewis & Gharib (Phys. Fluids, vol. 4, 1992, pp. 104–117). This result indicates that each cell undergoes a supercritical Hopf bifurcation for any $r$. As $r$ approaches $1$, the modal linear stability results also show an unstable eigenmode in the wake of the small cylinder resembling a new modulation cell, named N2, similar to the N cell but mirrored with respect to the junction plane.

Microbes play a primary role in wide-ranging biogeochemical and physiological processes, where ambient fluid flows are responsible for cell dispersal as well as mixing of dissolved resources, signalling molecules and biochemical products. Determining the simultaneous (and often coupled) transport properties of actively swimming cells together with passive scalars is key to understanding and ultimately predicting these complex processes. In recent work, Ran & Arratia (J. Fluid Mech., vol. 988, 2024, A25) present the striking observation that dilute concentrations of swimming bacteria severely hinder scalar transport through Lagrangian vortex boundaries in a chaotic flow. Analysis of rotation-dominated regions suggests that local accumulation of bacteria enhances the strength of transport barriers and highlights the role of understudied elliptical Lagrangian coherent structures in bacterial and multicomponent transport.

The initial flow past an impulsively started rotating and translating circular cylinder is asymptotically analysed using a Brinkman penalization method on the Navier–Stokes equation. In our previous study (J. Fluid Mech., vol. 929, 2021, A31), the asymptotic solution was obtained within the second approximation with respect to the small parameter, $\epsilon$, that is of the order of $1 / \lambda$. Here, $\lambda$ is the penalization parameter. In addition, the Reynolds number based on the cylinder radius and the translating velocity is assumed to be of the order of $\epsilon$. The previous study asymptotically analysed the initial flow past an impulsively started translating circular cylinder and investigated the influence of the penalization parameter $\lambda$ on the drag coefficient. It was concluded that the drag coefficient calculated from the integration of the penalization term exhibits a half-value of the results of Bar-Lev & Yang (J. Fluid Mech., vol. 72, 1975, pp. 625–647) as $\lambda \to \infty$. Furthermore, the derivative of vorticity in the normal direction was found to be discontinuous on the cylinder surface, which is caused by the tangential gradient of the pressure on the cylinder surface. The present study hence aims to investigate the variance on the drag coefficient against the result of Bar-Lev & Yang (1975). First, we investigate the problem of an impulsively started rotating circular cylinder. In this situation, the moment coefficient is independent of the pressure on the cylinder surface so that we can elucidate the role of the pressure to the hydrodynamic coefficients. Then, the problem of an impulsively started rotating and translating circular cylinder is investigated. In this situation, the pressure force induced by the unsteady flow far from the cylinder is found to play a key role on the drag force for the agreement with the result of Bar-Lev & Yang (1975), whereas the variance still exists on the lift force. To resolve the variance, an alternative formula to calculate the hydrodynamic force is derived, assuming that there is the pressure jump between the outside and inside of the cylinder surface. The pressure jump is obtained in this analysis asymptotically. Of particular interest is the fact that this pressure jump can cause the variance on the lift force calculated by the integration of the penalization term.

Utilizing the discrete element method and the pore network model, we numerically investigate the impact of compaction on the longitudinal dispersion coefficient of porous media. Notably, the dispersion coefficient exhibits a non-monotonic dependence on the degree of compaction, which is distinguished by the presence of three distinct regimes in the variation of dispersion coefficient. The non-monotonic variation of dispersion coefficient is attributed to the disparate effect of compaction on dispersion mechanisms. Specifically, the porous medium tightens with an increasing pressure load, reducing the effect of molecular diffusion that primarily governs at small Péclet numbers. On the other hand, heightened pressure loads enhance the heterogeneity of pore structures, resulting in increased disorder and a higher proportion of stagnant zones within porous media flow. These enhancements further strengthen mechanical dispersion and hold-up dispersion, respectively, both acting at higher Péclet numbers. It is crucial to highlight that hold-up dispersion is induced by the low-velocity regions in porous media flow, which differ fundamentally from zero-velocity regions (such as dead-ends or the interior of permeable grains) as described by the classical theory of dispersion. The competition between weakened molecular diffusion and enhanced hold-up dispersion and mechanical dispersion, together with the shift in the dominance of dispersion mechanisms across various Péclet numbers, results in multiple regimes in the variation of dispersion coefficients. Our study provides unique insights into structural design and modulation of the dispersion coefficient of porous materials.

We present data from direct numerical simulation (DNS) of the fully turbulent flow through nominally two-dimensional channels containing longitudinal, surface-mounted, rectangular ribs whose widths ($W$) are either one third of or equal to the gap ($S-W$) between consecutive ribs across the domain, where $S$ is the span (centre-to-centre spacing) of the ribs. A range of the ratio of channel half-height ($H$) to span ($S$) is considered, covering $0.25\le H/S\le 2.5$. In each case, a fixed rib height ($h$) of $0.1H$ was used, but a number of cases with much smaller heights, $h/H=0.025$ or 0.05, were also studied. The secondary flows resulting from the presence of the ribs are examined, along with their sources in terms of the axial vorticity transport equation, which highlights the effects of spanwise inhomogeneity in the Reynolds stresses. We show that the strength of the secondary flows depends strongly on $H/S$ (and, correspondingly, on $W/S$) and that the major sources of axial vorticity arise near the top corners of the ribs, with convection of that vorticity dominating its spread. We also show that for smaller ribs, the secondary flow strengths are similar to those predicted by Zampino et al. (J. Fluid Mech., vol. 944, 2022, A4) using a linearised model of the Reynolds-averaged equations, which does not include the vorticity convection process; the behaviour of secondary flow topology and strength with varying $W/H$ is thus noticeably different.

Spray formed by a myriad of secondary droplets generated by the impact of raindrops on a deep-water pool is studied with a laboratory rain facility. Experiments are performed with two rain rates and raindrops fall on the water surface at a nearly constant velocity. The secondary droplets at various heights above the pool's water surface are recorded with a cinematic digital in-line holographic technique that consists of a high-speed camera, a pulsed Nd:YLF laser and associated optics. The experimental results show that in the heat-map scatter plots of radius versus velocity near the water surface of the pool, the droplets are distributed into three regions, corresponding to distinct physical mechanisms of droplet generation. It is found that the diameter distribution of the droplets in the rain field changes with height above the pool's water surfaces. Both numerical simulation and experimental data reveal that the liquid water content, due to the presence of secondary droplets, in the atmospheric surface layer decreases exponentially with increasing height.

In 1945–1949, Lars Onsager made an exact analysis of the high-Reynolds-number limit for individual turbulent flow realisations modelled by incompressible Navier–Stokes equations, motivated by experimental observations that dissipation of kinetic energy does not vanish. I review here developments spurred by his key idea that such flows are well described by distributional or ‘weak’ solutions of ideal Euler equations. 1/3 Hölder singularities of the velocity field were predicted by Onsager and since observed. His theory describes turbulent energy cascade without probabilistic assumptions and yields a local, deterministic version of the Kolmogorov $4/5$th law. The approach is closely related to renormalisation group methods in physics and envisages ‘conservation-law anomalies’, as discovered later in quantum field theory. There are also deep connections with large-eddy simulation modelling. More recently, dissipative Euler solutions of the type conjectured by Onsager have been constructed and his $1/3$ Hölder singularity proved to be the sharp threshold for anomalous dissipation. This progress has been achieved by an unexpected connection with work of John Nash on isometric embeddings of low regularity or ‘convex integration’ techniques. The dissipative Euler solutions yielded by this method are wildly non-unique for fixed initial data, suggesting ‘spontaneously stochastic’ behaviour of high-Reynolds-number solutions. I focus in particular on applications to wall-bounded turbulence, leading to novel concepts of spatial cascades of momentum, energy and vorticity to or from the wall as deterministic, space–time local phenomena. This theory thus makes testable predictions and offers new perspectives on large-eddy simulation in the presence of solid walls.