Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-26T13:42:46.699Z Has data issue: false hasContentIssue false
  • English
  • Français

Rapid Annealing of Ion Implanted Silicon Structures using a Radiant Light Source

Published online by Cambridge University Press:  15 February 2011

H.B. Harrison ,
M. Grigg ,
K. T. Short ,
J.S. Williams  and
A. Zylewicz
H.B. Harrison
Affiliation:
Department of Communication and Electronic Engineering, Royal Melbourne Institute of Technology, Melbourne, 3000, Australia.
M. Grigg
Affiliation:
Department of Communication and Electronic Engineering, Royal Melbourne Institute of Technology, Melbourne, 3000, Australia.
K. T. Short
Affiliation:
Department of Communication and Electronic Engineering, Royal Melbourne Institute of Technology, Melbourne, 3000, Australia.
J.S. Williams
Affiliation:
Department of Communication and Electronic Engineering, Royal Melbourne Institute of Technology, Melbourne, 3000, Australia.
A. Zylewicz
Affiliation:
Department of Communication and Electronic Engineering, Royal Melbourne Institute of Technology, Melbourne, 3000, Australia.
Get access

Abstracta

simple radiant light source has been employed to rapidly anneal ion implanted silicon structures at temperatures >1000° C for times of the order of 1–200 sec. Rutherford backscattering and channeling analysis indicated good crystalline lattice recovery and the formation of metastable solid solutions of Sb in Si without observable diffusion broadening of the implanted profile. Diode arrays have been successfully annealed using the technique, with no observable deterioration of the surrounding oxide mask.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 4: Symposium A – Laser and Electron-Beam Interactions with Solids , 1981 , 771
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. See for example, Laser and Electron Beam Solid Interactions and Materials Processing, ed. Gibbons, J.F. et al. (North Holland, N.Y. 1981).Google Scholar
2. Gat, A. and Gibbons, J. F., Appl.Phys.Lett. 32, 142 (1978).Google Scholar
3. Regolini, J.L. et al. , Appl.Phys.Lett. 34, 410 (1979).Google Scholar
4. Shah, N.J., McMahon, R.A., Williams, J.G.S. and Ahmed, H., in Ref. 1, p.201.Google Scholar
5. Fan, J.C.C., Geis, M.W. and Tsaur, B.Y., Appl.Phys.Lett. 38, 365 (1981).Google Scholar
6. Fulks, R.T., Russo, C.J., Hanley, P.R. and Kamins, T.I., Appl. Phys. Lett. (May 1981)Google Scholar
7. Gat, A., IEEE Electron Device Letters 2, 85 (1981).Google Scholar
8. Nishiyama, K., Arai, M., Watanabe, N., Jap. J. Appl. Phys. Letters, 19, 563 (1980).Google Scholar
9. Lau, S.S. et al. , Appl. Phys. Lett. 35, 328 (1979).Google Scholar
10. Drowley, C. and Hu, C., Appl. Phys. Lett. 38, 876 (1981).Google Scholar
11. Williams, J. S., Nucl. Instr. Meth. 149, 207 (1978).Google Scholar
12. Trumbore, F.A., Bell Systems Tech. J. 39, 205 (1960).Google Scholar
13. Williams, J.S. and Short, K.T., subm. Appl. Phys. Lett. Google Scholar
14. Hill, C., in Ref. 1, p. 361.Google Scholar