Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-12-03T09:15:46.021Z Has data issue: false hasContentIssue false

A Selective Etching Process for Chemically Inert High-k Metal Oxides

Published online by Cambridge University Press:  11 February 2011

Katherine L. Saenger
Affiliation:
IBM Research Division, T.J. Watson Research Center, Yorktown Heights, NY 10598, U.S.A.
Harald F. Okorn-Schmidt
Affiliation:
IBM Research Division, T.J. Watson Research Center, Yorktown Heights, NY 10598, U.S.A.
Christopher P. D'Emic
Affiliation:
IBM Research Division, T.J. Watson Research Center, Yorktown Heights, NY 10598, U.S.A.
Get access

Abstract

Once annealed, high-k metal oxides such as HfO2 and Al2O3 can be extremely difficult to etch by wet chemical methods. Here we describe how ion bombardment at relatively low energy (a few hundred eV) can be used to make exposed regions of annealed HfO2 films etchable in aqueous HF-based solutions. HfO2 layers, 2–5 nm in thickness, were deposited by atomic layer chemical vapor deposition (ALCVD) on Si substrates, annealed at 700 °C, and subjected to selected-area ion bombardment supplied by an oxygen plasma in a reactive ion etching tool. Etch times (as indicated by time to “dewet“) were examined as a function of HfO2 thickness, the power and time of oxygen plasma treatments, post-oxygen-plasma anneals, and wet etch chemistry. Strategies for etching thicker films and additional data provided by electrochemical open circuit potential (OCP) measurements will also be discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Liu, L., Pey, K.L., and Foo, P., “HF wet etching of oxide after ion implantation,” Proceedings 1996 IEEE Hong Kong Electron Devices Meeting, 29 June 1996.Google Scholar
2. Jain, K.C. and Maclver, B.A., “Method for patterning silicon dioxide with high resolution in three dimensions,” U.S. Patent 4,652,334, issued March 24, 1987.Google Scholar
3. Barnett, J., Riley, D., Messina, T.C., Lysaght, P., “Wet etch enhancement of HfO2 films by implant processing,” Proceedings of UCPSS Ultra Clean Processing Technology 16 September 16, 2002, Oostende, Belgium (http://ucpss.com/programme.htm).Google Scholar
4. Okorn-Schmidt, H.F. et al., in preparation.Google Scholar
5. Okorn-Schmidt, H.F., Gusev, E.P., Cartier, E., Buchanan, D.A., Rath, D.L., Callegari, A., Guha, S., Bojarczuk, N.A., Gribelyuk, M., and Copel, M., “Characterization of bulk and interface properties of dielectric layers and stacks,” in “The Physics and Chemistry of SiO2 and the Si-SiO2 Interface - 4 Massoud, H.Z. et al., Edit., Proc. Vol. 2000–2, The Electrochemical Society, Pennington, NJ, 2000).Google Scholar
6. Okorn-Schmidt, H.F., “Characterization of silicon surface preparation processes for advanced gate dielectrics,” IBM J. Res. Develop. 43 351 (1999).Google Scholar