Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-19T14:16:34.945Z Has data issue: false hasContentIssue false
  • English
  • Français

Excimer Laser Etching of Cupric Oxide

Published online by Cambridge University Press:  26 February 2011

G. N. A. van Veen ,
W. Vrijmoeth ,
T. S. Baller  and
J. Dieleman
G. N. A. van Veen
Affiliation:
Philips Research Laboratories, 5600 JA Eindhoven, The Netherlands
W. Vrijmoeth
Affiliation:
State University of Utrecht, Dept. of Experimental Physics, P.B. 80.000, 3508 TA Utrecht, The Netherlands.
T. S. Baller
Affiliation:
Philips Research Laboratories, 5600 JA Eindhoven, The Netherlands
J. Dieleman
Affiliation:
Philips Research Laboratories, 5600 JA Eindhoven, The Netherlands
Get access

Abstract

Polycrystalline CuO samples are irradiated in UHV by excimer laser pulses at 308nm. Mass spectrometry combined with time-of-flight measurements is used to determine the composition of the desorbing particles and the desorption mechanisms. Additional information is provided by Scanning-Electron-Microscopy of the etched surfaces. At fluences below 1.8 J cm−2 the products Cu, O and O2 are desorbed by a purely thermal mechanism at temperatures up to 6000 K and a copper rich surface mask is formed. At higher power densities an additional ablative contribution is monitored which increases with power density, and much less surface area is covered by a Cu-rich mask.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 100: Symposium – A Fundamentals of Beam-Solid Interactions and Transient Thermal Processing , 1988 , 641
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. BAuerle, D., Chemical Processing with Lasers, 1st ed. (Springer, Berlin, 1986)Google Scholar
2. Sesselman, W., Marinero, E.E. and Chuang, T.J., Appl. Phys. A41, 209 (1986)Google Scholar
3. Veen, G.N.A. van, Baller, T.S. and Dieleman, J., submitted to Appl. Phys.Google Scholar
4. Baller, T.S., Veen, G.N.A. van and Dieleman, J., accepted for publication in J. Vac. Sci. Technol. A6 (1988)Google Scholar
5. Veen, G.N.A. van, Baller, T.S. and Vries, A.E. de, J. Appl. Phys. 60, 3746 (1986)Google Scholar
6. Gmelins Handbuch der Anorganischen Chemie-Part Cu, Vols. 60 A/B/C (Verlag Chemie, Weinheim, 1955/1958/1963)Google Scholar