Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-17T19:37:36.243Z Has data issue: false hasContentIssue false
  • English
  • Français

300° C Processing of Si Using Remote Plasma Techniques for In Situ Cleaning, Epitaxy, and Oxide/Nitride/Oxide Depositions

Published online by Cambridge University Press:  25 February 2011

G.G. Fountain ,
S.V. Hattangady ,
R.A. Rudder ,
J.B. Posthill  and
R.J. Markunas
G.G. Fountain
Affiliation:
Center for Semiconductor Research, Research Triangle Institute, Research Triangle Park, NC 27709
S.V. Hattangady
Affiliation:
Center for Semiconductor Research, Research Triangle Institute, Research Triangle Park, NC 27709
R.A. Rudder
Affiliation:
Center for Semiconductor Research, Research Triangle Institute, Research Triangle Park, NC 27709
J.B. Posthill
Affiliation:
Center for Semiconductor Research, Research Triangle Institute, Research Triangle Park, NC 27709
R.J. Markunas
Affiliation:
Center for Semiconductor Research, Research Triangle Institute, Research Triangle Park, NC 27709
Get access

Abstract

Low temperature Si processing techniques have been developed using remote plasma enhanced chemical vapor techniques. The 300° C in situ processes include indirectly excited hydrogen treatments for obtaining reconstructed Si(100) surfaces, Si/Si(100) homoepitaxy, and deposition of poly-Si/oxide/nitride/oxide/Si(100) structures with no capacitance-voltage hysteresis and low interface state density (4×1010cm−2eV−1). While all these processes have been accomplished with the same tool, the success of the in situ hydrogen treatment and the homoepitaxy are sensitive to the past history of the reactor. In particular, they are sensitive to by-products formed during the oxide deposition process. To eliminate these by-products, plasma conditioning of the chamber walls prior to introduction of the silicon wafer from the load lock has been necessary to obtain reproducible results.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 146: Symposium B – Rapid Thermal Annealing/Chemical Vapor Deposition and Integrated Processing , 1989 , 139
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Rudder, R.A., Fountain, G.G., and Markunas, R.J., J. Appl. Phys. 60, 3519 1986.CrossRefGoogle Scholar
2. Fountain, G.G., Rudder, R.A., Hattangady, S.V., Markunas, R.J., and Lindorme, P.S., J. Appl. Phys. 63, 4744 1988.CrossRefGoogle Scholar
3. Vitkavage, D.J., Fountain, G.G., Rudder, R.A., Hattangady, S.V., and Markunas, R.J., Appl. Phys. Lett. 53, 692 1988.Google Scholar
4. Lucovsky, G., Richard, P.D., Tsu, D.V., Lin, S.Y., and Markunas, R.J., J. Vac. Sci. Technol A 4, 681 1986.Google Scholar
5. Kim, Sang S., Tsu, D.V., and Lucovsky, G., J. Vac. Sci. Technol. A 6, 1740 1988.Google Scholar
6. Kern, W., Semiconductor International, 94 (1984).Google Scholar
7. Meiners, L.G., J. Vac. Sci. Technol. 21, 655 1982.CrossRefGoogle Scholar
8. Breaux, L., Anthony, B., I-Isu, T., Banerjee, S., and Tasch, A.D., Mat'l. Res. Soc. Bulletin, Proceedings of Adv. Mat'l. Conf., Mat'l Res. Soc., Denver, CO, March 1989.Google Scholar
9. Ghandhi, K., VLSI Fabrication Principles Silicon and Gallium Arsenide, (Wiley, New York, 1983).Google Scholar
10. Tsu, D.V., Parsons, G.N., Lucovsky, G., and Watkins, M.W., in press J. Vac. Sci. Technol. A from American Vacuum Society 1988 Fall Meeting, Atlanta, GA.Google Scholar