We demonstrate the tungsten disulfide (WS2) thin film catalysts prepared by the sulfurization of vacuum deposited WO3 thin films for efficient hydrogen production with over 90% Faradaic efficiency. The 23-nm-thick WS2 thin film catalyst heterojunction with p-type silicon photocathode could exhibit a photocurrent density of 8.3 mA/cm2 at 0 V versus a reversible hydrogen electrode (RHE), a low onset potential of 0.2 V versus RHE when photocurrent density reaches −1 mA/cm2 and long-term stability over 10 h. The enhanced catalytic activities of WS2/p-Si photocathodes compared with the bare p-Si photocathode originate from a number of edge sites in the synthesized polycrystalline thin films, which could act as hydrogen evolution catalyst.

The Phanerozoic subduction system of the Korean peninsula is considered to have been activated by at least Middle Permian time. The geochemically arc-like Andong ultramafic complex (AUC) occurring along the border between the Precambrian Yeongnam massif and the Cretaceous Gyeongsang back-arc basin provides a rare opportunity for direct study of the pre-Cretaceous mantle wedge lying above the subduction zone. The tightly constrained SHRIMP U–Pb age of zircons extracted from orthopyroxenite specimens (222.1±1.0 Ma) is indistinguishable from the Ar/Ar age of coexisting phlogopite (220±6 Ma). These ages represent the timing of suprasubduction zone magmatism likely in response to the sinking of cold and dense oceanic lithosphere and the resultant extensional strain regime in a nascent arc environment. The nearly coeval occurrence of a syenite-gabbro-monzonite suite in the SW Yeongnam massif also suggests an extensional tectonic setting along the continental margin side during Late Triassic time. The relatively enriched ɛHf range of dated zircons (+6.2 to −0.6 at 222 Ma) is in contrast to previously reported primitive Sr–Nd–Hf isotopic features of Cenozoic mantle xenoliths from Korea and eastern China. This enrichment is not ascribed to contamination by the hypothetical Palaeozoic crust beneath SE Korea, but is instead attributable to metasomatism of the lithospheric mantle during the earlier subduction of the palaeo-Pacific plate. Most AUC zircons show a restricted core-to-rim spread of ɛHf values, but some grains testify to the operation of open-system processes during magmatic differentiation.

Pb is released from bone stores during pregnancy, which constitutes a period of increased bone resorption. A high Na intake has been found to be negatively associated with Ca and adversely associated with bone metabolism. It is possible that a high Na intake during pregnancy increases the blood Pb concentration; however, no previous study has reported on the relationship between Na intake and blood Pb concentration. We thus have investigated this relationship between Na intake and blood Pb concentrations, and examined whether this relationship differs with Ca intake in pregnant Korean women. Blood Pb concentrations were analysed in 1090 pregnant women at mid-pregnancy. Dietary intakes during mid-pregnancy were estimated by a 24 h recall method covering the use of dietary supplements. Blood Pb concentrations in whole-blood samples were analysed using graphite furnace atomic absorption spectrophotometry. Multiple regression analysis performed after adjustment for covariates revealed that maternal Na intake was positively associated with blood Pb concentration during pregnancy, but only when Ca intake was below the estimated average requirement for pregnant Korean women (P= 0·001). The findings of the present study suggest that blood Pb concentration during pregnancy could be minimised by dietary recommendations that include decreased Na and increased Ca intakes.

The effect of wet chemical treatment on the magnetic tunneling junction (MTJ) was examined. The tunneling magneto-resistance (TMR) increased and the resistance of anti-parallel state and parallel state decreased when a wet cleaning treatment was carried out after a reactive ion etching process. Furthermore, the exfoliation between the capping layer and Inter layer Dielectric (ILD) was prevented. Presumably, these were due to the elimination of the damaged layer and the residues. This investigation showed that the wet treatment after the MTJ patterning using RIE process could improve the MTJ properties without degradation of Hc, such as TMR and Rlow.

Background: The influences of demographics, culture, language, and environmental changes on Mini-Mental State Examination (MMSE) scores are considerable.

Methods: Using a sample of 7452 healthy, community-dwelling elderly Koreans, aged 55 to 94 years, who participated in the four ongoing geriatric cohorts in Korea, we investigated demographic influences on MMSE scores and derived normative data for this population. Geropsychiatrists strictly excluded subjects with cognitive disorders according to the protocol of the Korean version of the Consortium to Establish a Registry for Alzheimer's Disease Assessment Packet (CERAD-K) Clinical Assessment Battery (CERAD-K-C).

Results: Education (standardized β = 0.463), age (standardized β = −0.303), and gender (standardized β = −0.057) had significant effects on MMSE scores (p < 0.001). The score of MMSE increase 0.379 point per 1-year education, decrease 0.188 per 1-year older, and decrease 0.491 in women compared to men. Education explained 30.4% of the scores’ total variance, which was much larger than the variances explained by age (8.4%) or gender (0.3%). Accordingly, we present normative data for the MMSE stratified by education (0, 1–3, 4–6, 7–9, 10–12, and ≥ 13 years), age (60–69, 70–79, and 80–89 years), and gender.

Conclusions: We provide contemporary education-, age-, and gender-stratified norms for the MMSE, derived from a large, community-dwelling elderly Korean population sample, which could be useful in evaluating individual MMSE scores.

High-resolution imaging and quantitative surface analysis of epicuticular waxes and epistomatal chambers of pine species were performed by field emission scanning electron microscopy and white light scanning interferometry. Both juvenile and adult needles were collected from the two-year-old seedlings of Pinus rigida and Pinus densiflora and subjected to surface observations. Epicuticular wax structures developed on the cuticle layer as well as in the epistomatal chambers and appeared to occlude the cavities in the two pine species. The stomata of P. densiflora were characterized by more distinctly raised rings around openings than P. rigida. The most common epicuticular wax structures of the two pine species included tubules with terminal openings and coiled rodlets. Wax platelets were deposited on epistomatal chambers. Either rodlets or tubules seemed to be longer and thicker in P. rigida than those in P. densiflora. White light scanning interferometry revealed quantitative surface profiles, demonstrating more ridged (ca. 4 μm high) stomatal apertures and nearly twofold deeper (ca. 20 μm deep) epistomatal chambers of P. densiflora than those of P. rigida. These results suggest that white light scanning interferometry can be applied to unravel the quantitative surface features of epicuticular sculptures on plant leaves.

Cocoa polyphenols have antioxidant and anti-inflammatory effects. TNF-α is a pro-inflammatory cytokine that has a vital role in the pathogenesis of inflammatory diseases such as cancer and psoriasis. Vascular endothelial growth factor (VEGF) expression is associated with tumorigenesis, CVD, rheumatoid arthritis and psoriasis. We tested whether cocoa polyphenol extract (CPE) inhibited TNF-α-induced VEGF expression in promotion-sensitive JB6 mouse epidermal cells. CPE significantly inhibited TNF-α-induced up-regulation of VEGF via reducing TNF-α-induced activation of the nuclear transcription factors activator protein-1 (AP-1) and NF-κB, which are key regulators of VEGF expression. CPE also inhibited TNF-α-induced phosphorylation of protein kinase B (Akt) and extracellular signal-regulated kinase. CPE blocked activation of their downstream kinases, p70 kDa ribosomal protein S6 kinase and p90 kDa ribosomal protein S6 kinase. CPE suppressed phosphoinositide 3-kinase (PI3K) activity via binding PI3K directly. CPE did not affect TNF-α-induced phosphorylation of mitogen-activated protein kinase kinase-1 (MEK1) but suppressed TNF-α-induced MEK1 activity. Collectively, these results indicate that CPE reduced TNF-α-induced up-regulation of VEGF by directly inhibiting PI3K and MEK1 activities, which may contribute to its chemopreventive potential.

We evaluated the effects of the two main kiwifruit cultivars (gold kiwifruit (GOK) and green kiwifruit (GRK)) and their active phenolic compound, quercetin, on H2O2-induced inhibition of gap-junction intercellular communication (GJIC) in WB-F344 rat liver epithelial cells. We found that both GOK and GRK protect WB-F344 cells from H2O2-induced inhibition of GJIC. The extracellular signal-regulated protein kinase 1/2 (ERK1/2)–connexin 43 (Cx43) signalling pathway is crucial for the regulation of GJIC, and both GOK and GRK blocked the H2O2-induced phosphorylation of Cx43 and ERK1/2 in WB-F344 cells. Quercetin alone attenuated the H2O2-mediated ERK1/2–Cx43 signalling pathway and consequently reversed H2O2-mediated inhibition of GJIC in WB-F344 cells. A free radical-scavenging assay using 1,1-diphenyl-2-picrylhydrazyl showed that the scavenging activity of quercetin was higher than that of a synthetic antioxidant, butylated hydroxytoluene, per mol, suggesting that the chemopreventive effect of quercetin on H2O2-mediated inhibition of ERK1/2–Cx43 signalling and GJIC may be mediated through its free radical-scavenging activity. Since the carcinogenicity of reactive oxygen species such as H2O2 is attributable to the inhibition of GJIC, GOK, GRK and quercetin may have chemopreventive potential by preventing the inhibition of GJIC.

We investigate boron transient enhanced diffusion (TED) and series resistance in SiGe/Si heterojunction channel pMOSFET. The stress gradient at the SiGe/Si interface near the gate edge in high Ge concentrations are found to determine boron TED as well as extension junction shape, which has a significant impact on the parasitic LDD and source/drain (S/D) series resistance. In addition, high Ge concentrations in the epitaxial SiGe layer on top of Si substrate result in a high sheet resistance during a 1000°C/5s rapid thermal processing (RTP), which is mainly due to alloy scattering and interface roughness scattering.

The hydrophobicity of poly Si is reported to introduce different polishing behavior with careful control of post CMP cleaning process. The purpose of this study was to investigate the effect of poly Si wettability on its CMP behavior. The adhesion force of polymeric particle on the poly Si wafer surfaces was measured in the KOH solution (pH 11) as a function of solution A concentration. Adhesion force decreased and saturated as a function of concentration of solution A. The change of surface wettability affects not only the polishing rates but also the level of contamination on wafer because the interactions between particles and substrates are dependent on the wettability of the surface. Also, hydrophobic poly Si surfaces attracted much more pad particles with water marks than hydrophilic

We report on the basic characteristics and gas sensing operation of density controlled single-walled carbon nanotube (SWCNT) thin films on poly(dimethyl siloxane) (PDMS) substrates The vacuum filteration and PDMS mold transfer method allowed the density of SWCNT distributed to have non-local uniformity. The optical transparency of the SWCNT thin films was inversely proportional to SWCNT density and conductivity. The flexible SWCNT thin film showed high mechanical stability with negligible change in conductance after being bent by 180o. We evaluated its gas sensing operation depending on SWCNT density and bias voltage. It was shown that lower SWCNT density thin films had higher sensitivity to NH3 gas, which may be due to higher exposed surface area for lower density SWCNT thin films. Also, we found that lower bias voltage devices showed faster recovery times. The results show that vacuum filteration and mold transfer method produced flexible SWCNT thin films that have stable mechanical and electrical characteristics and also stable gas sensing capabilities making them applicable to future flexible integrated sensors.

CMP(Chemical Mechanical Planarization) process is widely used to reduce step height in semiconductor fabrication processes. As a design rule shrinks, a highly planar surface becomes inevitable within wafer scales. In order to get a high degree of a planarization, self-stopping characteristics of a ceria-based slurry should be studied and used in semiconductor process. In this study, threshold polishing pressure for a self-stopping characteristics was obtained by optimizing down pressure, pad conditioning, and mixing ratio of ceria abrasive and additive. A series of experiments were made to optimize the threshold polishing pressure in variable line & space patterns that consist of 0.8um step height and unit oxide film. As a result, self-stopping cmp process is twice batter than conventional silica-based process with respect to planarity and WIWNU. In addition, WIWNU and step height was dramatically decreased to less than 1000Å when applying to real fabrication devices over 2um step height.