Goosegrass is a problematic weed in turfgrass, and overuse of dinitroaniline (dna) herbicides has resulted in evolution of resistant populations. The objectives of this research were to (1) evaluate responses of a susceptible (S) goosegrass compared to a suspected resistant (R) biotype from Griffin, GA to prodiamine, and (2) evaluate efficacy of various PRE herbicides for control. Prodiamine rates required for 50% control and 50% shoot reductions after 6 wk for R-goosegrass measured > 13.44 and 3.2 kg ai ha−1, respectively, whereas rates for the S-population measured 0.45 and < 0.42 kg ha−1, respectively. In field experiments, sequential applications of dithiopyr and prodiamine provided < 20% control of R-goosegrass over 2 yr. Single applications of dimethenamid-P at 1.68 kg ai ha−1 provided < 50% goosegrass control in 2011 but provided excellent control (≥ 90%) at 7 mo after initial treatments (MAIT) in 2012. Single and sequential applications of indaziflam provided excellent control of goosegrass in both years, and oxadiazon controlled goosegrass > 85% at 7 MAIT in 2011 and ≥ 90% in 2012. Single and sequential PRE sulfentrazone applications controlled goosegrass < 60% in 2011 but averaged 94% control in 2012. Overall, indaziflam and oxadiazon provided good (80 to 89%) to excellent control of dna-resistant goosegrass in both years, but dimethenamid and sulfentrazone were inconsistent.

Herbicide options for management of volunteer corn in soybean include a variety of acetyl CoA carboxylase-inhibiting herbicides, yet often, applications of acetyl CoA carboxylase herbicides are delayed until the weed is visible above the soybean canopy. Volunteer corn growing above the soybean canopy is a highly competitive weed, and herbicides applied at this point can kill the weed, yet soybean yield loss is still a concern. Our objective was to compare the effect of controlling various densities of volunteer corn growing in soybean EARLY (≤ 30 cm) versus LATE (≈ 90 cm) on percent control and soybean yield. Seven volunteer corn densities (0, 0.5, 2, 4, 8, 12, and 16 plants m−2) were hand planted into 19-cm row soybean. Clethodim 79 g ai ha−1 was tank-mixed with glyphosate at 840 g ae ha−1 and applied to the volunteer corn EARLY and LATE. The EARLY application provided higher and less variable control of volunteer corn 14 d after treatment (DAT) compared to LATE applications at all volunteer corn densities. There was no difference in control at 28 DAT for both the EARLY and LATE applications. Soybean yield was not affected by either application timing. Although no yield reduction was seen with the LATE treatments, later-season applications of clethodim to control volunteer corn may offer more variable control and could allow for additional Bt selection pressure on targeted insect pests.

PRE herbicides are less effective in the zero-tillage system because of increased residual crop stubble and reduced soil incorporation. However, since weeds are not physically controlled in the zero-tillage system, reliance on efficacy of PRE herbicides is increased. This research investigated the impact of carrier volume and droplet size on the performance of PRE herbicides (in wheat crops at four sites in 2010) to improve herbicide efficacy in conditions of high stubble biomass in zero-tillage systems. Increasing carrier volume from 30 to 150 L ha−1 increased spray coverage on water-sensitive paper from an average of 5 to 32%. Average control of rigid ryegrass by trifluralin (at Cunderdin and Merredin sites) and trifluralin or pyroxasulfone (at Wickepin and Esperance sites) improved from 53 to 78% with increasing carrier volume. Use of ASABE Medium droplet size improved spray coverage compared with ASABE Extremely Coarse droplet size, but did not affect herbicide performance. It is clear that increased carrier volume improves rigid ryegrass weed control for nonwater-soluble (trifluralin) and water-soluble (pyroxasulfone) PRE herbicides. Western Australian growers often use low carrier volumes to reduce time of spray application or because sufficient high-quality water is not available, but the advantages of improved weed control justifies the use of a high carrier volume in areas of high weed density.

A survey of soybean fields containing waterhemp infestations was conducted just prior to harvest in 2008 and 2009 to determine the frequency and distribution of glyphosate-resistant waterhemp in Missouri, and to determine if there are any in-field parameters that may serve as indicators of glyphosate resistance in this species in future crop production systems. Glyphosate resistance was confirmed in 99 out of 144, or 69%, of the total waterhemp populations sampled, which occurred in 41 counties of Missouri. Populations of glyphosate-resistant waterhemp were more likely to occur in fields with no other weed species present at the end of the season, continuous cropping of soybean, exclusive use of glyphosate for several consecutive seasons, and waterhemp plants showing obvious signs of surviving herbicide treatment compared to fields characterized with glyphosate-susceptible waterhemp. Therefore, it is suggested that these four site parameters, and certain combinations of these parameters, serve as predictors of glyphosate resistance in future waterhemp populations.

Field experiments were conducted in grain sorghum at five locations in Kansas in 2009 and 2010, to evaluate the efficacy and crop safety of early- to mid-POST (EMPOST) and late-POST (LPOST) applications of premixed pyrasulfotole and bromoxynil (PYRA&BROM) in tank mix combinations with atrazine or atrazine plus 2,4-D ester or dicamba compared to bromoxynil plus atrazine. PYRA&BROM at 244 or 300 g ai ha−1 plus atrazine at 560 g ai ha−1 applied EMPOST controlled pigweed species (Palmer amaranth, tumble pigweed, and redroot pigweed), kochia, velvetleaf, common sunflower, ivyleaf morningglory, and common lambsquarters 93% or greater. Puncturevine control among three locations ranged from 85 to 99%. Control of most weed species was not improved by increasing PYRA&BROM rate from 244 to 300 g ha−1 or by tank mixing 2,4-D or dicamba with PYRA&BROM plus atrazine. However, ivyleaf morningglory control was improved at the LPOST timing by adding 2,4-D or dicamba at 140 g ae ha−1. In no instance did any PYRA&BROM treatment provide greater weed control than bromoxynil plus atrazine at 281 + 560 g ha−1 when applied EMPOST, but in most instances PYRA&BROM treatments were more effective than bromoxynil plus atrazine when applied LPOST. Generally, PYRA&BROM treatments were more effective when applied EMPOST than LPOST, especially when 2,4-D or dicamba was added. PYRA&BROM plus atrazine treatments caused foliar bleaching in sorghum within 7 ± 3 d after treatment, but recovery was complete within 3 to 4 wk and grain yields were not reduced. Tank mixing dicamba with PYRA&BROM and atrazine occasionally reduced visible crop response compared to PYRA&BROM plus atrazine. Our results indicate that PYRA&BROM plus atrazine with or without 2,4-D or dicamba selectively controls several troublesome broadleaf weeds in grain sorghum. Foliar bleaching of sorghum leaves can occur but the symptoms are transient, and grain yields are not likely to be reduced.

A 2-yr study was conducted to evaluate bell pepper response and honeyvine milkweed control from PRE herbicides, clomazone and trifluralin, applied under polyethylene mulch. Clomazone (0.8 and 1.4 kg ai ha−1) and trifluralin (0.7 and 1.1 kg ai ha−1) were applied alone or in combination. Herbicides were applied after beds were made and before polyethylene mulch was laid, followed by transplanting pepper within hours of herbicide application. In both years, initial bleaching of lower leaves was observed; the injury was observed in some treatments, but not others. Honeyvine milkweed, growing in the planting hole, exhibited significant bleaching and stunting in most herbicide treatments. Both clomazone and trifluralin resulted in season-long honeyvine milkweed control in both years. However, the use of clomazone and trifluralin together for control of honeyvine milkweed does not seem justified due to the potential for herbicide antagonism, as indicated in this study. The total number and fresh weight of harvested bell pepper were not affected by the herbicides or rates. All herbicide treatments resulted in about twice the yield (average of 8.8 kg) of the hand-weeded control (4.6 kg) in both years. This study strongly supports the safety and effectiveness of clomazone and/or trifluralin applied pretransplant under polyethylene mulch in bell pepper production for control of honeyvine milkweed.

A total of four field experiments were conducted over a 2-yr period (2011 and 2012) near Mokane and Moberly, Missouri, to determine the control of glyphosate-resistant (GR) waterhemp with dicamba and glyphosate applied alone or as a tank-mix combination. In one experiment, dicamba was applied at 0.14, 0.28, 0.42, and 0.56 kg ae ha−1 with or without 0.86 kg ae ha−1 glyphosate to GR waterhemp plants 7.5, 15, and 30 cm in height. In a second experiment, sequential treatments of dicamba or dicamba plus glyphosate were applied 4, 7, and 14 d after the initial herbicide treatment to plants measuring either 7.5 or 23 cm in height. Control of GR waterhemp ranged from 7 to 62%, 11 to 40%, and 8 to 30% when applied to 7.5-, 15-, and 30-cm plants, respectively. Control of 7.5-cm GR waterhemp increased by 16 to 36%, and biomass reduction increased by 29 to 52% in response to 0.14, 0.28, 0.42, and 0.56 kg ha−1 dicamba plus glyphosate compared to these same rates of dicamba alone. When sequential dicamba-containing treatments were averaged across all treatments and application timings, GR waterhemp control ranged from 46 to 47%, and biomass reduction ranged from 55 to 66%. No differences in control were observed based on the timing of the sequential herbicide treatment. However, in terms of GR waterhemp biomass reduction, sequential treatments applied 4 d after the initial treatment reduced GR waterhemp biomass more than sequential treatments applied 14 d after the initial treatment. Results from these experiments indicate that, in the absence of crop competition, a single treatment of dicamba up to 0.56 kg ha−1 provides less than 62% control of GR waterhemp, and sequential dicamba plus glyphosate treatments targeting 7.5 cm plants are required to achieve at least 72% control.

The looming water crisis and shortage of labor during rice transplanting in northwest India have led researchers to develop alternative methods to transition away from puddled transplanted rice. In this context, dry-seeded rice (DSR) is emerging as an efficient production technology to replace puddled transplanted rice. Weeds, however, are the main biological constraints to its success. A study comprising 12 treatments was conducted to evaluate the efficacy of PRE (pendimethalin and pyrazosulfuron) and POST herbicides (bispyribac, penoxsulam, and azimsulfuron) applied either alone or in a sequence for weed control in dry-seeded fine rice cv. ‘Punjab Mehak 1’. Results indicated that the single application of pendimethalin (750 g ai ha−1) PRE, pyrazosulfuron (15 g ai ha−1) PRE, bispyribac-sodium (25 g ai ha−1) POST, penoxsulam (25 g ai ha−1) POST, and azimsulfuron (20 g ai ha−1) POST reduced total weed biomass by 75, 68, 73, 70, and 72%, respectively, compared with the nontreated control at flowering stage of the crop. Azimsulfuron POST and pyrazosulfuron PRE proved effective against purple nutsedge and crowfootgrass, respectively. Chinese sprangletop, large crabgrass, and junglerice were effectively controlled with pendimethalin PRE. POST application of bispyribac-sodium and penoxsulam provided effective control of rice flatsedge. Compared to the nontreated control, grain yield following the single application of pendimethalin PRE, pyrazosulfuron PRE, bispyribac-sodium POST, penoxsulam POST, and azimsulfuron POST increased by 149, 119, 138, 124, and 144%, respectively. The sequential application of herbicides proved better than single applications. The lowest weed biomass was observed with the sequential application of pendimethalin PRE followed by azimsulfuron POST, and rice yielded 228% more than the nontreated control following this treatment. The results of this study are important for farmers growing DSR in making decisions regarding the application of POST herbicides, according to existing weed flora in the field.

The effect of time of day (TOD) on the activity of six common POST herbicides was investigated in field trials from 2007 to 2009 at two locations in southwestern Ontario. Percentage weed control was assessed following application of bentazon, chlorimuron-ethyl, fomesafen, glyphosate, imazethapyr, or quizalofop-p-ethyl applied at 3-h intervals from 6:00 A.M. to midnight, when weeds averaged 15 cm tall. The effect of time of day varied with weed species, but weed control was generally reduced when herbicides were applied at 6:00 A.M., 9:00 P.M., and midnight. Herbicide activity on velvetleaf was most frequently reduced, especially for chlorimuron-ethyl, glyphosate, and imazethapyr. Control of common ragweed with glyphosate and imazethapyr was also affected by the timing of application, and pigweed species only showed an effect with glyphosate. Variation in temperature, relative humidity, and dew presence/absence at different times of the day, as well as morphological/physiological characteristics such as weed size at time of application and diurnal leaf movement in response to light intensity, may account for the variation in weed control at different times of the day. Significant soybean yield loss was not observed in this study, but may occur if herbicide efficacy is severely reduced by application at inappropriate times of day. These results provide valuable information for growers, and suggest that POST herbicides are most effective when applied midday, rather than in the early morning or late evening.

Availability of soybean with dicamba resistance will provide an alternative weed management option, but risk of dicamba injury to sensitive crops from off-target movement and spray tank contamination is of concern. Research conducted at multiple locations and years evaluated soybean injury and yield response to POST applications of the diglycolamine salt of dicamba. Dicamba was applied at the two to three trifoliate stage (V3/V4) at 4.4, 8.8, 17.5, 35, 70, 140, and 280 g ae ha−1 (1/128 to 1/2 of the recommended use rate of 560 g ae ha−1). Soybean injury 7 d after application was 20% following dicamba at 4.4 g ha−1 and increased to 89% at 280 g ha−1. At 14 d after application, injury for the same rates increased from 39 to 97%. In a separate study, dicamba was applied at first flower (R1) at 1.1, 2.2, 4.4, 8.8, 17.5, 35, and 70 g ha−1 (1/512 to 1/8 of use rate). Soybean injury 7 d following dicamba application was 19% at 1.1 g ha−1 and increased to 64% at 70 g ha−1. For the same rates of dicamba, injury from 7 to 14 d after application increased no more than 4 percentage points. For dicamba rates in common for the timing studies, soybean injury 14 d after treatment was greatest for application at V3/V4, but the negative effect on mature soybean height and yield was greatest for application at R1. For dicamba at 4.4 g ha−1 (1/128th of use rate), soybean yield was reduced 4% when applied at V3/V4 and 10% when applied at R1. For 17.5 g ha−1 dicamba (1/32 of use rate), yield was reduced 15% at V3/V4 and 36% at R1. Based on yield reductions for 4.4 and 17.5 g ha−1 dicamba, soybean at flowering was around 2.5 times more sensitive compared with vegetative exposure.

Field experiments were conducted in 2010 and 2011 at a Mclean County, IL seed corn production field where resistance to foliar-applied 4-hydroxyphenylpyruvate dioxygenase (HPPD) inhibitors was confirmed in waterhemp. Corn herbicides were applied to the soil at 1 and 2 times (1× and 2×, respectively) the recommended field use rate, while soybean herbicides were applied only at 1× the recommended rate. Waterhemp control and density were determined 30 and 60 d after treatment (DAT). In corn, 1× rates of mesotrione, safened and unsafened isoxaflutole formulations, atrazine, and S-metolachlor provided less than 70% control 30 DAT, while control with acetochlor was greater than 80%. One and 2× rates of acetochlor and 2× rates of mesotrione and unsafened isoxaflutole provided the greatest reduction of waterhemp density across years. At 30 DAT in soybean, sulfentrazone, flumioxazin, metribuzin, and pyroxasulfone provided the highest levels of waterhemp control (84 to 92%), as well as the greatest reduction in waterhemp density both years. A dose–response experiment with soil-applied mesotrione was performed under controlled greenhouse conditions using three waterhemp populations: MCR15 (seed collected from the McLean Co. site), NH41 (progeny obtained from the McLean Co. population by an additional generation of mesotrione selection in the greenhouse), and a sensitive (S). Emergence counts 21 DAT revealed higher seedling survival of MCR15 and NH41 at mesotrione rates of 105 g ha−1 or less compared with the sensitive control. Resistant-to-sensitive (R/S) ratios for NH41 and MCR15 were 12.7 and 8.8, respectively. Field results indicate the McLean Co. waterhemp population demonstrates reduced sensitivity to soil-applied HPPD-inhibiting herbicides. This is supported by greenhouse results that demonstrate reduced sensitivity to mesotrione in MCR15 and NH41.

Camelina is an emerging oilseed crop suitable for biofuel production in dryland cropping systems of the northwestern United States. Currently, camelina growers have limited herbicide options available for weed control. Tolerance of camelina to PRE applications of quinclorac, S-metolachlor, dimethenamid-P, pendimethalin, and pyroxasulfone was evaluated at two locations (Kalispell in 2009 and 2010, and Huntley in 2010 and 2011) in Montana. Susceptibility to each herbicide was determined at three different rates. Quinclorac applied PRE at 280 to 840 g ai ha−1 did not significantly injure camelina, and had no negative effect on plant density, biomass, flowering, and yield at either location. S-Metolachlor at 1,060 to 2,140 g ai ha−1 caused less than 20% injury to camelina, with no reductions in plant density, biomass, and yield compared with the nontreated check. Dimethenamid-P applied at 630 g ai ha−1 did not affect camelina density, biomass, flowering, and yield; however, at the 1,260 g ha−1 rate, injury was as high as 60% (in the coarse-textured Kalispell soil), and plant density and yield were reduced as much as 50 and 31%, respectively, in addition to delayed flowering. Despite causing some visual injury to camelina, crop yield was not reduced by pendimethalin at the 1,060 or 2,130 g ai ha−1 rate. Pyroxasulfone caused significant crop injury, stand loss, and yield reductions, and thus does not appear to be a viable option for weed control in camelina. Camelina plants that exhibited early-season injury showed robust growth and compensatory abilities, with lack of significant effect of herbicides on late-season plant height and biomass at least in one of the two locations. On the baseis of this research, quinclorac was the safest of all herbicides tested in camelina. Dimethenamid-P, S-metolachlor, and pendimethalin also may have an acceptable level of crop safety at lower use rates for possible registration in camelina.

Growth chamber experiments were conducted to assess the effects of foliage-only, soil-only, and foliage-plus-soil placements of amicarbazone on annual bluegrass and creeping bentgrass growth. Evaluated herbicide treatments included amicarbazone at 49 or 147 g ai ha−1, as well as bispyribac-sodium at 74 g ai ha−1 for comparative purposes. Data from this research agree with previous reports of amicarbazone plant uptake. Amicarbazone is absorbed via above- and belowground pathways; however, plant growth is inhibited more by root uptake. Compared to foliage-only amicarbazone placement, soil-only placement more than doubled reductions in aboveground biomass and root mass 56 d after treatment (DAT), whereas no differences were detected between placements including soil contact. Across all evaluated parameters in this research, amicarbazone (49 g ha−1) impacted creeping bentgrass growth similarly to bispyribac-sodium, whereas annual bluegrass growth was inhibited more by amicarbazone, suggesting it provides a more efficacious chemical option for end-user applications.

Dermatitis from poison ivy is an important health problem, and considerable effort is devoted to the control of this virulent weed. Triclopyr, metsulfuron, and two fixed-ratio tank mixtures of triclopyr and metsulfuron were evaluated across a series of rates for poison ivy control. The objective was to test whether tank mixtures are more effective than triclopyr alone. Triclopyr, metsulfuron, and 9 : 1 and 8 : 2 (by weight) mixtures of these two herbicides, respectively, were applied at eight rates to 1-yr old, pot-grown poison ivy plants. Rates ranged in phytotoxicity from none to death. Percentage of control as determined from plant fresh weight reduction relative to a nontreated control was determined at 1 and 4 mo after treatment (MAT). Data were subjected to ANOVA followed by nonlinear regression. Rates required for 95% control at 1 MAT, control of regrowth at 4 MAT, and the costs of these treatments were determined for the herbicides applied alone and the mixtures. Triclopyr alone and metsulfuron alone were consistently the least and the most expensive treatments, respectively. The mixtures were intermediate to these extremes.

Field studies were conducted in 2011 and 2012 at the Horticultural Crops Research Station near Clinton, NC, to determine ‘Covington' sweetpotato tolerance to S-metolachlor rate and application timing. Treatments were a factorial arrangement of four S-metolachlor rates (0, 1.1, 2.2, or 3.4 kg ai ha−1) and six application timings (0, 2, 5, 7, 9, or 14 d after transplanting [DAP]). Immediately following application, 1.9 cm of irrigation was applied to individual plots. Sweetpotato injury was minimal for all treatments (≤ 10%). No. 1 grade sweetpotato yield displayed a negative linear response to S-metolachlor rate, and decreased from 25,110 to 20,100 kg ha−1 as S-metolachlor rate increased from 0 to 3.4 kg ha−1. Conversely, no. 1 sweetpotato yield displayed a positive linear response to S-metolachlor application timing and increased from 19,670 to 27,090 kg ha−1 as timing progressed from 0 to 14 DAP. Total marketable sweetpotato yield displayed a quadratic response to both S-metolachlor application rate and timing. Total marketable yield decreased from 44,950 to 30,690 kg ha−1 as S-metolachlor rate increased from 0 to 3.4 kg ha−1. Total marketable yield increased from 37,800 to 45,780 kg ha−1 as application timing was delayed from 0 to 14 DAP. At 1.1 kg ha−1S-metolachlor, sweetpotato storage root length to width ratio displayed a quadratic relationship to application timing and increased from 1.87 to 2.23 for applications made 0 to 14 DAP. At 2.2 kg ha−1 of S-metolachlor, sweetpotato length to width ratio displayed a quadratic response to application timing, increased from 1.57 to 2.09 for 0 to 10 DAP, and decreased slightly from 2.09 to 2.03 for 10 to 14 DAP. Application timing did not influence length to width ratio of sweetpotato storage roots for those plots treated with S-metolachlor at either 0 or 3.4 kg ha−1.

Giant miscanthus is under consideration as a biofuel crop in the United States; however, there is little information on weed management for the establishment and survival of this crop. Therefore, greenhouse and field studies using ornamental pots were conducted in summer 2011 at Tifton, GA, with the objective of screening potential PPI, PRE, and POST herbicides and herbicide combinations for giant miscanthus when establishing from vegetative rhizomes. For the POST treatments, giant miscanthus was established from rhizomes in 7.6-L containers in the field and treated with 27 POST herbicides to evaluate efficacy. Thifensulfuron, metsulfuron, tribenuron, chlorimuron, halosulfuron, rimsulfuron, cloransulam, pinoxaden, bentazon, and metribuzin did not significantly lower shoot height, reduce shoot dry weight, or increase injury compared with nontreated control (NTC) when evaluated at 4 wk after treatment. Nicosulfuron, trifloxysulfuron, sulfometuron, clodinafop, fluazifop, and pyrithiobac caused the greatest injury, reduced plant height, and reduced dry weights compared with the NTC. Sethoxydim, diclofop, flumioxazin, imazamox, imazapic, and imazethapyr decreased plant heights or resulted in increased injury. PPI and PRE treatments included 21 herbicides and herbicide combinations applied at two rates. Results indicated that most treatments containing atrazine, metribuzin, pendimethalin, acetochlor, metolachlor, and mesotrione did not injure or stunt growth; however, EPTC at 4.5 kg ai ha−1 significantly reduced height and dry weight and oxadiazon resulted in greater injury compared with NTC at both rates. These results indicate that PPI, PRE, and POST herbicides can be utilized for establishment of giant miscanthus from vegetative rhizomes. Considering the invasive potential of giant miscanthus, several POST herbicides evaluated in this study such as fluazifop, pyrithiobac, and sulfometuron may be viable options to control this species if it becomes invasive.

Greenhouse and field studies were conducted to evaluate bell pepper tolerance to the sulfonylurea herbicides imazosulfuron and thifensulfuron-methyl. Imazosulfuron was applied at 56, 112, 224, 336, or 448 g ai ha−1. Thifensulfuron-methyl was applied at 2.6, 5.3, 10.5, 21.0, or 31.6 g ai ha−1. In the greenhouse over 2 yr, bell pepper injury due to imazosulfuron POST ranged from 12 to 27%. Reductions in plant height and numbers of nodes, buds, flowers, and fruits were generally minor or not observed. Injury from thifensulfuron-methyl POST ranged from 40 to 60% in the greenhouse. Similar trends were observed for leaf chlorosis and distortion. Thifensulfuron-methyl tended to decrease numbers of buds, flowers, and fruits in the greenhouse. In the field at three sites, bell pepper injury due to imazosulfuron applied POST-directed (POST-DIR) was less than 10% at all rating times, and height and yield were not affected. Total and marketable yield averaged 40,300 and 35,810 kg ha−1, respectively, across environments and years. Bell pepper injury from thifensulfuron-methyl applied POST-DIR in the field was less than 20% with all rates and less than 10% when rates less than 10.6 g ai ha−1 thifensulfuron-methyl were applied. Bell pepper stand (plants ha−1) or height was not affected by thifensulfuron-methyl. Thifensulfuron-methyl did not affect total bell pepper yield (39,310 kg ha−1 averaged across environments); however, reductions in Fancy grade yield were observed. No. 1 and cull yield grades tended to increase with increasing thifensulfuron-methyl rate, apparently compensating for lost Fancy yield.

Greenhouse studies were conducted in Raleigh, NC to determine Carolina redroot control by selected PRE and POST herbicides labeled for blueberries. Paraquat, glufosinate, glyphosate, and flumioxazin provided some Carolina redroot shoot control 7 d after POST application (DAPOST) ranging from 48 to 74%. Control 25 DAPOST was greatest for hexazinone at 2.2 kg ai ha−1 (90%) followed by glufosinate with 56% control and paraquat and terbacil each with 53% control. Control for most treatments declined between 25 and 63 DAPOST with the exception of glyphosate, which increased to 64%. Carolina redroot shoots per pot were reduced by terbacil, hexazinone at 2.2 kg ha−1, and glyphosate compared with the nontreated check 63 DAPOST. Control of Carolina redroot roots and rhizomes 63 DAPOST ranged from 7 to 68%, with the greatest control provided by terbacil (68%) and hexazinone at 2.2 kg ha−1 (64%). Terbacil and hexazinone at 2.2 kg ha−1 were the only treatments that reduced both shoot and root/rhizome dry weight compared with the nontreated check.

Bermudagrass is grown extensively in the southern United States as a livestock forage. Annual grass weeds can be problematic in bermudagrass hay production, few effective control measures are available. Bermudagrass hay is harvested approximately every 28 d. Because most annual grass weeds germinate whenever environmental conditions become appropriate, control options must address a target weed population that varies in age, and may or may not have been mowed during previous harvests. Cohort age has rarely been included in control studies that combine herbicides and mowing. We tested this idea in a greenhouse study. Barnyardgrass, large crabgrass, and green foxtail were seeded on a weekly schedule. The following four treatments were initiated when five cohort ages ranging 8 to 36 d were obtained: clipping only, herbicide only, clipping followed by (fb) herbicide, and a nontreated control. Time interval between clipping and herbicide application was 5 d. Plants were clipped at 5 cm above the soil surface. Herbicide application was a tank mixture of nicosulfuron + metsulfuron at 39.3 + 10.5 g ai ha−1, respectively. Shoots were harvested 21 d after the herbicide treatment, and dry weights of the first three treatments were expressed as percent biomass reduction relative to the age-equivalent nontreated control. Regression analyses indicated a similar response pattern for all three grass species within treatments. For clipping alone, biomass reduction increased as cohort age increased. Conversely for herbicide alone, biomass reduction decreased with age. However, biomass reduction with the clipping fb herbicide treatment was only nominally influenced by grass cohort age, providing ≥ 84% biomass reduction across all cohort ages and species.

Research was conducted in 2003 and 2004 to evaluate diflufenzopyr tank mixes for western ragweed control and injury to ‘Tifton 85′ bermudagrass. In 2003 at 94 DAT, picloram at 0.28 and 0.56 kg ae ha−1 with or without diflufenzopyr provided greater than 95% control of western ragweed, whereas triclopyr + dilfufenzopyr, dicamba + diflufenzopyr, triclopyr alone, and diflufenzopyr alone provided < 77% control. In 2004 at 95 DAT, only the highest rate of picloram alone provided 96% control, and the two highest rates of picloram + diflufenzopyr provided at least 95% control. Tifton 85 bermudagrass growth reduction increased with the addition of diflufenzopyr to picloram in 2003, but not in 2004. However, forage dry-matter yield was not reduced by any herbicide treatment compared to the nontreated control. Results of these studies indicate that picloram alone and picloram + diflufenzopyr provide excellent control of western ragweed. The tank mixture of picloram + diflufenzopyr can improve control over picloram alone. However, dicamba + diflufenzopyr, triclopyr + diflufenzopyr, triclopyr alone, and diflufenzopyr alone did not provide adequate control.