Dicamba may be an efficacious option for the control of glyphosate-resistant (GR) horseweed in glyphosate/dicamba-resistant soybean; research is needed to optimize the application rate based on horseweed height at the time of application. The purpose of this study was to determine the effect of glyphosate/dicamba rate and application timing for the control of GR horseweed. Glyphosate/dicamba was applied at three rates (900, 1,350, and 1,800 g ae ha−1) at three horseweed application timings (5, 15, and 25 cm) in a factorial design. There was no interaction between glyphosate/dicamba rate and timing for GR horseweed control or soybean yield; however, there was an interaction for GR horseweed density and biomass. At 2 and 4 wk after application (WAA), there was a decrease in GR horseweed control as the height at the time application increased. At 4 WAA, the application of glyphosate/dicamba to GR horseweed that was 5-, 15-, and 25-cm tall provided 87%, 76%, and 62% control, respectively. There was no impact of glyphosate/dicamba application timing on soybean yield. At 2, 4, and 8 WAA, there was an increase in GR horseweed control as the rate of glyphosate/dicamba was increased. At 8 WAA, glyphosate/dicamba applied at 900, 1,350, and 1,800 g ae ha−1 controlled GR horseweed 76%, 87%, and 92%, respectively. Earlier application timings and higher rates of glyphosate/dicamba caused the greatest reduction in GR horseweed density and biomass. Reduced GR horseweed competition resulted in a 100% to 144% increase in soybean yield, but there was no difference in soybean yield among glyphosate/dicamba rates tested.

Obtaining spatially explicit, cost-effective, and management-relevant data on invasive plant distributions across large natural areas presents considerable challenges. This is especially true when multiple monitoring objectives exist, because the utility of different monitoring methodologies varies with scale, logistical considerations, and information needs. The Florida Everglades is a vast wetland landscape with widespread invasive plant infestations and multiple management jurisdictions. A multi-agency team Working Group conducted a workshop in 2013 to explore opportunities to enhance the performance of a regional weed control program. Among the most important developments occurring at this meeting was the recognition that relevant management questions are scale-dependent. This led the team to define multiple monitoring objectives. Essential for conveying the success of the weed management program is quantifying large-scale patterns of change, as are quantifying fine-scale patterns informing control activities, defining mechanisms of spread, recognizing accelerating rates of spread, and detecting patterns of occupancy immediately before management intervention. The group’s deliberation resulted in the emergence of a multiscale monitoring program utilizing several distinct monitoring protocols, including systematic landscape-level reconnaissance, a sample-based spatially stratified monitoring system, detailed inventories in planned treatment areas, and a set of methods focused solely on early detection and rapid response. Here we provide an overview of the Everglades multiscale invasive plant monitoring program, highlight benefits and challenges of each program component, and discuss how this program has improved regional invasive plant management.

Florpyrauxifen-benzyl is a new herbicide under development in rice that will provide an alternative mode of action to control barnyardgrass. Multiple greenhouse experiments evaluated florpyrauxifen-benzyl efficacy on barnyardgrass accessions collected in rice fields across Arkansas, and to evaluate its efficacy on herbicide-resistant biotypes. In one experiment, florpyrauxifen-benzyl was applied at the labeled rate of 30 g ai ha−1 to 152 barnyardgrass accessions collected from 21 Arkansas counties. Florpyrauxifen-benzyl at 30 g ai ha−1 effectively controlled barnyardgrass and subsequently reduced plant height and aboveground biomass. In a dose-response experiment, susceptible-, acetolactate synthase (ALS)-, propanil-, and quinclorac-resistant barnyardgrass biotypes were subjected to nine rates of florpyrauxifen-benzyl ranging from 0 to 120 g ai ha−1. The effective dose required to provide 90% control, plant height reduction, and biomass reduction of the susceptible and resistant biotypes fell below the anticipated labeled rate of 30 g ai ha−1. Based on these results, quinclorac-resistant barnyardgrass as well as other resistant biotypes can be controlled with florpyrauxifen-benzyl at 30 g ai ha−1. Overall, results from these studies indicate that florpyrauxifen-benzyl can be an effective tool for controlling susceptible and currently existing herbicide-resistant barnyardgrass biotypes in rice. Additionally, the unique auxin chemistry of florpyrauxifen-benzyl will introduce an alternative mechanism of action in rice weed control thus acting as an herbicide-resistance management tool.

Glyphosate-resistant (GR) Italian ryegrass is one of the most troublesome weeds in Mississippi row crop production. Fall-applied residual herbicide applications are recommended for control of GR Italian ryegrass. However, carryover of residual herbicides applied in fields for rice production can have a negative impact on rice performance. Field studies were conducted in Stoneville, MS, to determine the effects of fall-applied residual herbicides on rice growth and yield. Herbicide treatments included suggested use rates (1×) of clomazone at 840 g ai ha–1, pyroxasulfone 170 g ai ha–1, S-metolachlor 1,420 g ai ha–1, and trifluralin 1,680 g ai ha–1, and two times (2×) the suggested use rates in the fall before rice seeding. Pooled across application rate, pyroxasulfone, S-metolachlor, and trifluralin injured rice to an extent 28% to 36% greater than clomazone 14 d after emergence (DAE). Rice seedling density and height 14 DAE and rice maturity were negatively affected by all fall-applied herbicides except clomazone. Applications at 2× rates reduced rough rice yields in plots treated with pyroxasulfone, S-metolachlor, and trifluralin compared with clomazone. Pyroxasulfone applied at the 2× rate reduced rough rice yield 22% compared with the 1× rate. Rough rice yield was 90% or greater of the nontreated control in plots treated with either rate of S-metolachlor, and these were comparable with rough rice yields from plots treated with both rates of trifluralin and the 1× rate of pyroxasulfone. Early-season injury and reductions in seedling density and height 14 DAE, would preclude even 1× applications of pyroxasulfone, S-metolachlor, and trifluralin from being viable options for residual herbicide treatments targeting GR Italian ryegrass in the fall before rice seeding. Of the herbicides evaluated, only clomazone should be utilized as a fall-applied residual herbicide treatment targeting GR Italian ryegrass before seeding rice.

To address recent concerns related to auxin herbicide drift onto soybean, a study was developed to understand the susceptibility of the reproductive stage of soybean to a new auxin herbicide compared with dicamba. Florpyrauxifen-benzyl is under development as the second herbicide in a new structural class of synthetic auxins, the arylpicolinates. Field studies were conducted to (1) evaluate and compare reproductive soybean injury and yield following applications of florpyrauxifen-benzyl or dicamba across various concentrations and reproductive growth stages and (2) determine whether low-rate applications of florpyrauxifen-benzyl or dicamba to soybean in reproductive stages would have similar effect on the progeny of the affected plants. Soybean were treated with 0, 1/20, or 1/160, of the 1X rate of florpyrauxifen-benzyl (30 g ai ha−1) or dicamba (560 g ae ha−1) at R1, R2, R3, R4, or R5 growth stage. Soybean plant height and yield was reduced from 1/20X dicamba across all reproductive stages. High drift rates (1/20X) of florpyrauxifen-benzyl also reduced soybean plant height >25% and yield across R1 to R4 stages. Germination, stand, plant height, and yield of the offspring of soybean plants treated with dicamba and florpyrauxifen-benzyl were significantly affected. Dicamba applied at a rate of 1/20X at R4 and R5 resulted in 20% and 35% yield reduction for the offspring, respectively. A similar reduction occurred from florpyrauxifen-benzyl applied at R4 and R5 at the 1/20X rate, resulting in 15% to 24% yield reduction for the offspring, respectively. Based on these findings, it is suggested that growers use caution when applying these herbicides in the vicinity of reproductive soybean.

Six trials were conducted during 2014/15 and 2015/16 growing seasons in Brazil to determine the effect of 2,4-D formulations and spray nozzles on 2,4-D spray drift under conventional field conditions. An experimental 2,4-D choline formulation with Colex-D® Technology (GF-3073) and a 2,4-D dimethylamine (DMA) formulation were applied with either XR and AIXR flat-fan spray nozzles. Each plot was 30 m wide by 24 m long (720 m2) with 60 glyphosate-resistant soybean rows spaced 50 cm apart and also 35 potted tomato plants distributed on a grid across the plot 5-m apart. Applications were performed one meter away from the plot edge perpendicular to the soybean rows when wind direction was parallel to the rows with less than 30 degrees of angle deviation. Spray drift treatments were applied in 100 L ha−1 with tractor sprayers at 276 kPa equipped with a 7-m wide boom at 50 cm above the canopy of the soybean plant, operating at 6.8 km h−1. The distance from the plot edge to the farthest plant with 2,4-D symptoms was assessed for every four soybean rows at 10 and 20 days after treatment (DAT) and potted tomatoes at 10 DAT. GF-3073 reduced the distance of the farthest injured plant with 2,4-D symptoms compared to the 2,4-D DMA formulation regardless of the spray nozzle, assessment date and sensitive species. GF-3073 applied through the AIXR nozzle reduced the relative drift affected area to the standard by 68% at 10 DAT and 67% at 20 DAT for soybean and 60% at 10 DAT for potted tomatoes.

Purple nutsedge is difficult to control in vegetable plasticulture due to its ability to penetrate the plastic mulch. Experiments were conducted in Spring 2011 and 2012 at the Plant Science Research and Education Center in Citra, Florida, and in Spring and Fall 2013 at the Gulf Coast Research and Education Center in Balm, Florida. The objective was to determine tomato (cv. Amelia, Charger, and Florida 47) tolerance and purple nutsedge response to herbicides and herbicide tank-mixes applied POST-directed to base of tomato. Chlorimuron-ethyl, flazasulfuron, fomesafen, halosulfuron, imazosulfuron, rimsulfuron, nicosulfuron, and trifloxysulfuron applied POST-directed to the base of the crop did not cause crop damage. Halosulfuron or tank-mixes that contained halosulfuron tended to provide the greatest nutsedge suppression in all experiments. Halosulfuron or nicosulfuron+rimsulfuron applications when tomato (cv. Charger) were flowering reduced marketable yields by 22-28% compared to the nontreated control. No yield reductions occurred with Florida 47 or Amelia cultivars. Flazasulfuron provided similar purple nutsedge suppression to halosulfuron and did not damage tomato. Tank-mixes that contained halosulfuron tended not to provide any added benefit over halosulfuron alone. This research identified herbicides that are safe for use as a POST-directed application in tomato. Additional research is needed to evaluate efficacy of these herbicides on broadleaf weeds.

In the southeastern United States, Amaranthus, or pigweed species, have become troublesome weeds in agricultural systems. To implement management strategies for the control of these species, agriculturalists need information on areas affected by pigweeds. Geographic information systems (GIS) afford users the ability to evaluate agricultural issues at local, county, state, national, and global levels. Also, they allow users to combine different layers of geographic information to help them develop strategic plans to solve problems. Furthermore, there is a growing interest in testing free and open-source GIS software for weed surveys. In this study, the free and open-source software QGIS was used to develop a geographic information database showing the distribution of pigweeds at the county level in the southeastern United States. The maps focused on the following pigweeds: Palmer amaranth, redroot pigweed, and tall waterhemp. Cultivated areas and glyphosate-resistant (GR) pigweed data were added to the GIS database. Database queries were used to demonstrate applications of the GIS for precision agriculture applications at the county level, such as tallying the number of counties affected by the pigweeds, identifying counties reporting GR pigweed, and identifying cultivated areas located in counties with GR pigweeds. This research demonstrated that free and open-source software such as QGIS has strong potential as a decision support tool, with implications for precision weed management at the county scale.

Two field studies were conducted in Louisiana to determine the impact of Nealley’s sprangletop on rough rice yield under multiple environments in 2014, 2015, and 2016. The first study evaluated optimal timings of Nealley’s sprangletop removal for optimizing rough rice yields. The second study evaluated the impact of Nealley’s sprangletop densities on rough rice yield. Nealley’s sprangletop was removed with applications of fenoxaprop at 122 g ai ha–1 at 7, 14, 21, 28, 35, and 42 d after emergence (DAE). Nealley’s sprangletop removal at 7 and 14 DAE resulted in higher rough rice yields of 7,880 and 6,960 kg ha–1, respectively, when compared with the rice from the season-long Nealley’s sprangletop competition with a 6,040 kg ha-1 yield. Delaying herbicide application from 7 DAE to 42 DAE resulted in a yield loss of 1,740 kg ha–1. Over the 35-d delay in application, rough rice yield loss from Nealley’s sprangletop interference was equivalent to 50 kg ha–1 d–1. Nealley’s sprangletop densities were established at 1, 3, 7, 13, and 26 plants m–2 by transplanting Nealley’s sprangletop when rice reached the one- to two-leaf stage. At Nealley’s sprangletop densities of 1 to 26 plants m–2, rough rice yields were reduced 10 to 270 kg ha–1, compared with the rice from weed-free plots. Based on regression analysis, Nealley’s sprangletop densities of 1, 35, 70, and 450 plants m–2 reduced rough rice yield 0.14%, 5%, 10%, and 50%, respectively.

Cover crops are being increasingly recommended as an integrated approach to controlling glyphosate-resistant Palmer amaranth and other troublesome weeds. Thus, a field experiment was conducted in 2010 through 2012 to evaluate the critical period for weed control (CPWC) in cotton as affected by a cereal rye cover crop and tillage. The management systems evaluated included conventional tillage following winter fallow, conservation tillage (CT) following winter fallow, and CT following a cereal rye cover crop managed for maximum biomass. Throughout most of the growing season, weed biomass in cereal rye cover crop plots was less than the CT winter-fallow system in both years and less than both CT winter fallow and conventional tillage in 2012. The CPWC was shortest in 2010 following conventional tillage; however, in 2012, production system influences on CPWC were less. The presence of the rye cover crop delayed the critical timing for weed removal (CTWR) approximately 8 d compared with fallow treatment both years, while conventional tillage delayed CTWR about 2 wk compared with winter fallow. Relative yield losses in both years did not reach the 5% threshold limit until about 2 wk after planting (WAP) for CT following winter fallow, 3 WAP for CT following a cover crop, and 3.5 WAP following conventional tillage. Thus, CT following winter fallow should be avoided to minimize cotton yield loss.

The evolution of herbicide resistance is making it extremely difficult for US rice producers to use chemical control on weed species such as barnyardgrass and red rice. To combat herbicide resistance, it is imperative that alternative herbicide sites of action (SOAs) be incorporated into rice whenever possible. There are currently no very-long-chain fatty acid–inhibiting herbicides (WSSA Group 15) labeled for use in US rice; however, pethoxamid is one such herbicide currently under development. If appropriate rice tolerance and weed control can be established, pethoxamid would represent a unique herbicide SOA for use in US rice. We conducted field trials near Stuttgart, AR, in 2015 and near Colt and Lonoke, AR, in 2016 to assess selectivity of pethoxamid and weed control alone and in combination with other herbicides as a delayed preemergence (DPRE) application in drill-seeded rice. Pethoxamid was applied at 0, 420, or 560 g ai ha–1 alone and in combination with clomazone, imazethapyr, pendimethalin, and quinclorac. Minimal rice injury occurred with any treatment assessed. A reduction in rice shoot density and plant height compared to the nontreated control followed the use of pethoxamid; however, no decrease in yield resulted. The highest levels of barnyardgrass control followed the use of imazethapyr at 91% and quinclorac at 89% regardless of the presence of pethoxamid near Lonoke; however, pethoxamid applied at both rates in combination with clomazone and quinclorac increased barnyardgrass control compared to clomazone and quinclorac applied alone. Near Colt, barnyardgrass control of 92% and 96% resulted from pethoxamid alone, averaged over the high and low rates. Based on these data, rice can tolerate pethoxamid when applied DPRE, and adequate levels of barnyardgrass control can be achieved at the rates evaluated within a program; hence, pethoxamid appears to be a viable option for use in rice to allow for increased rotation of herbicide SOAs to combat herbicide-resistant and difficult-to-control weeds.

Glyphosate-resistant (GR) kochia is an increasing management concern in major cropping systems of the northwestern US. In 2014, we investigated four putative GR kochia accessions (designated as ALA, VAL, WIL, DB) collected from sugar beet fields in eastern Oregon and southwestern Idaho to characterize the level of evolved glyphosate resistance and determine the relationship between the 5-enol-pyruvylshikimate-3-phospate synthase (EPSPS) gene copy number and level of glyphosate resistance. The EPSPS gene copy number was used as a molecular marker to detect GR kochia in subsequent surveys in 2015 and 2016. Based on LD50 values from a whole-plant dose-response study, the four putative GR kochia populations were 2.0- to 9.6-fold more resistant to glyphosate than the glyphosate-susceptible (GS) accession. In an in vivo leaf-disk shikimate assay, leaf disks of GS kochia plants treated with 100-μM glyphosate accumulated 2.4- to 4.0-fold higher amounts of shikimate than the GR plants. The four GR accessions had 2.7 to 9.1 relative EPSPS gene copies compared with the GS accession (<1 EPSPS gene copies), and there was a linear relationship between EPSPS gene copy number and glyphosate resistance level (LD50 values). The 2015 and 2016 GR kochia survey results indicated that about half of the collected populations from sugar beet fields in eastern Oregon had developed resistance to glyphosate whereas only one population from the Idaho collection was confirmed glyphosate resistant. This is the first confirmation of GR kochia in sugar beet fields in eastern Oregon and southwestern Idaho. Diversified weed control programs will be required to prevent further development and spread of GR kochia in sugar beet-based rotations in this region.

Sugarbeet, grown for biofuel, is being considered as an alternate cool-season crop in the southeastern U.S. coastal plain. Typically, the crop would be seeded in the autumn, then grow through the winter and be harvested the following spring. Labels for herbicides registered for use on sugarbeet grown in the traditional sugarbeet production regions do not list any of the cool-season weeds common in the southeastern United States. Field trials were initiated near Ty Ty, GA, to evaluate all possible combinations of ethofumesate applied PRE, phenmedipham+desmedipham applied POST, clopyralid POST, and triflusulfuron POST for cool-season weed control in sugarbeet. Phenmedipham+desmedipham alone and in combination with clopyralid and/or triflusulfuron effectively controlled cutleaf eveningprimrose, lesser swinecress, henbit, and corn spurry when applied to seedling weeds. Ethofumesate PRE alone was not as effective in controlling cool-season weeds compared to treatments containing phenmedipham+desmedipham POST. However, ethofumesate PRE applied sequentially with phenmedipham+desmedipham POST improved weed control consistency. Clopyralid and/or triflusulfuron alone did not adequately control cutleaf eveningprimrose. Triflusulfuron alone effectively controlled wild radish. In the 2013–2014 and 2014–2015 seasons, December-applied POST herbicides did not injure sugarbeet. However, in the 2015–2016 season POST herbicides were applied in late October. On the day of treatment, the maximum temperature was 25.4 C, which exceeded the established upper temperature limit of 22 C for safe application of phenmedipham+desmedipham, and sugarbeet plants were severely injured. In the southeastern United States, temperatures frequently exceed 22 C in early autumn, which may limit phenmedipham+desmedipham use for controlling troublesome cool-season weeds of sugarbeet in the region. Weed control options need to be expanded to compensate for this limitation.

The commercial release of crops with engineered resistance to 2,4-D and dicamba will alter the spatial and temporal use of these herbicides. This, in turn, has elicited concerns about off-target injury to sensitive crops. In 2014 and 2015, studies were conducted in Tifton, GA, to describe how herbicide (2,4-D and dicamba), herbicide rate (1/75 and 1/250 field use), and application timing (20, 40, and 60 DAP) influence watermelon injury, vine development, yield, and the accumulation of herbicide residues in marketable fruit. In general, greater visual injury and reductions in vine growth, relative to the non-treated check, were observed when herbicide applications were made before watermelon plants had begun to flower. Although the main effects of herbicide and rate were less influential than the timing of applications with respect to plant development, the 1/75 rates were more injurious than the 1/250 rates; dicamba was more injurious than 2,4-D. In 2014, the 1/75 and 1/250 rates of each herbicide reduced marketable fruit numbers 13 to 20%, but only for the 20 DAP application. The 1/75 rate of each herbicide when applied at either 20 or 40 DAP reduced the number of fruit harvested per plot in 2015. Dicamba residues were detected in marketable fruit when the 1/75 rate in 2014 and 2015 and the 1/250 rate in 2015 was applied to plants at 40 or 60 DAP. Residues of 2,4-D were detected in 2015 when the 1/75 and 1/250 rates were applied at 60 DAP. Across both years, the maximum level of residue detected was 0.030 ppm. While early season injury may reduce watermelon yields, herbicide residue detection is more likely in marketable fruit when an off-target contact incident occurs closer to harvest.

Herbicide active ingredients, formulation type, ambient temperature, and humidity can influence volatility. A method was developed using volatility chambers to compare relative volatility of different synthetic auxin herbicide formulations in controlled environments. 2,4-D or dicamba acid vapors emanating after application were captured in air-sampling tubes at 24, 48, 72, and 96 h after herbicide application. The 2,4-D or dicamba was extracted from sample tubes and quantified using liquid chromatography and tandem mass spectrometry. Volatility from 2,4-D dimethylamine (DMA) was determined to be greater than that of 2,4-D choline in chambers where temperatures were held at 30 or 40 C and relative humidity (RH) was 20% or 50%. Air concentration of 2,4-D DMA was 0.399 µg m−3 at 40 C and 20% RH compared with 0.005 µg m−3 for 2,4-D choline at the same temperature and humidity at 24 h after application. Volatility from 2,4-D DMA and 2,4-D choline increased as temperature increased from 30 to 40 C. However, volatility from 2,4-D choline was lower than observed from 2,4-D DMA. Volatility from 2,4-D choline at 40 C increased from 0.00458 to 0.0263 µg m−3 and from 0.00341 to 0.025 µg m−3 when humidity increased from 20% to 50% at 72 and 96 h after treatment, respectively, whereas, volatility from 2,4-D DMA tended to be higher at 20% RH compared with 50% RH. Air concentration of dicamba diglycolamine was similar at all time points when measured at 40 C and 20% RH. By 96 h after treatment, there was a trend for lower air concentration of dicamba compared with earlier timings. This method using volatility chambers provided good repeatability with low variability across replications, experiments, and herbicides.

The introduction of 2,4-D–resistant soybean will provide an additional POST herbicide site of action for control of herbicide-resistant broadleaf weeds. The introduction of this technology also brings concern of off-site movement of 2,4-D onto susceptible crops such as sensitive soybean and tomato. The 2,4-D formulation approved for use in 2,4-D–resistant soybean restricts application of the herbicide to nozzles that produce very coarse to ultra-coarse droplet spectrums. The use of larger droplet spectrums for broadcast applications can reduce herbicide deposition onto target weeds and thus influence herbicide efficacy. Field experiments were conducted to evaluate the influence of nozzle design on herbicide deposition onto target plants and the resulting efficacy of a POST application of 280 g ha−1 glyphosate plus 280 g ha−1 2,4-D. The TTI11004 nozzle produced an ultra-coarse droplet spectrum and reduced coverage and deposition density on spray cards as compared with the XR11004 and TT11004 nozzles that produced medium droplet spectrums. The AIXR11004 nozzle also reduced deposition density on spray cards but did not reduce coverage. Herbicide solution deposition onto glyphosate-resistant Palmer amaranth, tall waterhemp, giant ragweed, and horseweed ranged from 0.28 to 0.72 µl cm−2 and was not influenced by nozzle design. Herbicide efficacy was reduced by the TTI11004 nozzle on Palmer amaranth and horseweed compared with the AIXR11004, TT11004, and XR11004 nozzles when applications were made to either high densities of plants or plants exceeding the labeled height. The use of the AIXR11004 and TTI11004 nozzles that are listed as approved nozzles for glyphosate plus 2,4-D applications on 2,4-D–resistant soybean did not reduce herbicide deposition onto four of the most troublesome broadleaves and did not reduce herbicide efficacy when applied in conjunction with lower weed densities and smaller weeds.

Herbicide-resistant Echinochloa spp. pose a significant threat to U.S. rice production. Two surveys were conducted to characterize Echinochloa resistance to common rice herbicides and provide important demographic information on the populations in Arkansas: one was the Echinochloa Herbicide Resistance Confirmation Survey conducted annually since 2006; the other was the Echinochloa Herbicide Resistance Demographics Survey conducted since 2010. The Resistance Confirmation Survey showed that resistance to propanil (50%) was most prevalent, followed by quinclorac (23%), imazethapyr (13%), and cyhalofop (3%). Multiple resistance increased with time, with 27% of accessions being multiple-resistant, mostly to propanil+quinclorac (12%). The parallel Resistance Demographics Survey tested resistance by species. Of the 264 accessions collected, 73% were junglerice, 14% were rough barnyardgrass, and 11% were barnyardgrass. Overall, this survey also showed resistance to propanil (53%) and quinclorac (28%) being most prevalent, with low frequencies of resistance to cyhalofop (12%) and imazethapyr (6%). Resistance to herbicides was less frequent with barnyardgrass (54%) and rough barnyardgrass (28%) than with junglerice (73%). Multiple resistance was most frequent with junglerice (33%) and least frequent with rough barnyardgrass (8%). Across both surveys, the resistance cases were clustered in the northeast and Grand Prairie regions of the state. Herbicide resistance among Echinochloa populations in rice fields is continuing to increase in frequency and complexity. This is a consequence of sequential selection with different major herbicide sites of action, starting with propanil followed by quinclorac and others.

Herbicide resistance to several of the most common weed species in US rice production, such as barnyardgrass and red rice, has made weed control extremely difficult with available herbicide options. No very-long-chain fatty acid–inhibiting herbicides are labeled for use in US rice; however, pethoxamid is one such herbicide under development for soil-applied use to control grasses and small-seeded broadleaves in rice and various row crops. Field trials were conducted in 2015 and 2016 near Stuttgart, AR, for rice tolerance and in 2016 near Colt, AR, and Lonoke, AR, for weed control with the use of pethoxamid-containing rice herbicide programs. Pethoxamid was applied alone and in a program at 420 and 560 g ai ha–1 with other herbicides labeled in rice including clomazone, quinclorac, propanil, imazethapyr, and carfentrazone POST. Injury less than 10% was seen for all treatments 2 wk after application in 2015 and 2016, except for pethoxamid at 420 g ha–1 to clomazone to one-leaf rice. Rice injury dissipated to less than 5% following all treatments by 4 wk after flood establishment. Barnyardgrass was controlled 95% or more near Colt and 93% or more near Lonoke for herbicide programs including clomazone PRE followed by pethoxamid plus quinclorac or imazethapyr at three- to four-leaf stage rice. Considering the minimal injury and high levels of barnyardgrass control associated with pethoxamid-containing weed control programs, pethoxamid provides a unique and effective site of action for use in US rice production.

Previous research has shown that some insecticide seed treatments provide safening effects in rice following exposure to low rates of the herbicides glyphosate and imazethapyr. However, no research has been conducted to determine whether a similar effect may be seen in soybean or grain sorghum, two important rotational crops across the Midsouth. To evaluate the potential safening effects of insecticide seed treatments in these two crops, field trials were conducted in Marianna, AR, in 2015 and 2016, and near Colt, AR, in 2016. In soybean, glyphosate, glufosinate, 2,4-D, dicamba, halosulfuron, mesotrione, tembotrione, and propanil were applied at low rates to simulate drift events, in combination with the insecticide seed treatments thiamethoxam and clothianidin at labeled rates. In grain sorghum, glyphosate, imazethapyr, and quizalofop were applied at low rates in combination with the insecticide seed treatments thiamethoxam, clothianidin, and imidacloprid at labeled rates. Injury reduction was seen at 1 site-year for glyphosate, glufosinate, 2,4-D, dicamba, mesotrione, and tembotrione, and at 2 of 3 site-years for halosulfuron. At 1 site-year, the safening in halosulfuron resulted in increases in both crop height and yield. In grain sorghum, reducing injury via seed treatments was generally more successful. All three herbicides applied in sorghum displayed instances of injury reduction when seed treatments were used at 1 or more site-years, including reducing injury upward of 40% in the case of quizalofop+clothianidin at Marianna in 2016. For 2 site-years, injury reduction through the use of insecticides resulted in increases in crop height and grain yield in grain sorghum compared with no insecticide use. Although the degree of safening seen varied depending on site-year in both crops, growers who use insecticide seed treatments on an annual basis may expect to see a safening effect from drift events of most herbicides evaluated in both soybean and grain sorghum.

Tropical signalgrass (TSG) is one of the most problematic weeds found on golf courses, sports fields, and sod farms in south Florida. The recent ban of monosodium methane-arsonate (MSMA), an organic arsenical herbicide, from urban areas in Florida has left turfgrass managers searching for effective management options. In an effort to avoid relying solely on POST chemical control, this research examined the effect of combining a cultural practice, verticutting, along with PRE and POST herbicides as an integrated weed management approach to controlling TSG in hybrid bermudagrass. Field experiments were conducted at multiple locations over 2 yr in south Florida to: (1) determine whether verticutting before herbicide applications increases TSG control and (2) identify herbicide programs that effectively control TSG. No interactions between verticutting and herbicide programs were detected, but verticutting consistently provided a slight reduction (8% averaged across herbicide treatments) in TSG cover. Treatments containing a PRE herbicide resulted in a significant reduction (20% to 50%) in TSG cover at 52 wk after initial treatment (WAIT), while some POST herbicide treatments reduced TSG cover to <20% at 52 WAIT. A study was conducted to determine which POST herbicide combinations were most efficacious in controlling TSG. Amicarbazone alone provided ≤35% TSG control at 8 and 12 WAIT, but synergistic responses were observed between amicarbazone and mesotrione, trifloxysulfuron, and thiencarbazone+foramsulfuron+halosulfuron. Two- and three-way combinations of amicarbazone with these POST herbicides resulted in >80% TSG control at 4, 8, and 12 WAIT, with some reaching 100% TSG control at 4 WAIT. Based on these data, verticutting may provide limited complementary control, but certain combinations of POST herbicides exhibited excellent (>95%) TSG control.