Yarn-type supercapacitors should have high energy density in small given spaces, and the one attempt among many is to comprise the electrodes asymmetrically. However, the low capacitance of conventional materials causes the widened operating voltage useless. In this study, we have utilized a novel material MXene with carbon nanotubes (CNTs) to make highly loaded MXene/CNT yarn electrodes, which exhibited a remarkable areal capacitance. With MnO2/CNT biscrolled cathode and PVA/LiCl gel electrolyte, the plied asymmetric yarn supercapacitor had energy density of 100 µWh/cm2. The yarn supercapacitor could operate under mechanical deformations without performance degradation.

Despite recent reports regarding the biology of cytosine methylation in Schistosoma mansoni, the impact of the regulatory machinery remains unclear in diverse platyhelminthes. This ambiguity is reinforced by discoveries of DNA methyltransferase 2 (DNMT2)-only organisms and the substrate specificity of DNMT2 preferential to RNA molecules. Here, we characterized a novel DNA methyltransferase, named CsDNMT2, in a liver fluke Clonorchis sinensis. The protein exhibited structural properties conserved in other members of the DNMT2 family. The native and recombinant CsDNMT2 exhibited considerable enzymatic activity on DNA. The spatiotemporal expression of CsDNMT2 mirrored that of 5-methylcytosine (5 mC), both of which were elevated in the C. sinensis eggs. However, CsDNMT2 and 5 mC were marginally detected in other histological regions of C. sinensis adults including ovaries and seminal receptacle. The methylation site seemed not related to genomic loci occupied by progenies of an active long-terminal-repeat retrotransposon. Taken together, our data strongly suggest that C. sinensis has preserved the functional DNA methylation machinery and that DNMT2 acts as a genuine alternative to DNMT1/DNMT3 to methylate DNA in the DNMT2-only organism. The epigenetic regulation would target functional genes primarily involved in the formation and/or maturation of eggs, rather than retrotransposons.

Self-aligned silicide (salicide) formation of epitaxial CoSi2, using a Co/Ti bilayer, on linear oxide (SiO2) patterned (100)Si substrate has been investigated. Rapid thermal annealing (RTA) at 550°C resulted in the lateral encroachment of silicide in the Si under the edge of the oxide. After RTA at 900°C, even though an epitaxial CoSi2 layer was formed on the Si substrate, defects such as lateral encroachment and voids were generated under the edge of the oxide. It was found that such defects lead to device failure due to the deterioration of the gate oxide and the shallow junction.

Composite fibers composed of chitosan and single-wall carbon nanotubes (CNTs) have been fabricated using a wet spinning method. The dispersion was improved by the sonic agitation of the CNTs in a chitosan solution followed by centrifugation to remove tube aggregates and any residual catalyst. The mechanical behavior was investigated using a dynamic mechanical analyzer (DMA). The mechanical tests showed a dramatic increase in Young's modulus for the chitosan/CNT composite fibers fabricated using the improved dispersion method. The strain on the microfibers was determined from tensile load measurements during pH switching in acidic or basic electrolyte solutions. The microfibers showed a general actuation behavior of expanding at pH = 2 and contracting at pH = 7 under low tensile loads. However, a reverse of this actuation behavior was exhibited under high tensile loads. This anomalous pH actuation is both new and surprising. It was explained from an analysis of the differences in sample stiffness and Poisson’s ratio under tensile load in electrolyte solutions with different pH values.

Composite nanofibers including ferritin nanoparticles or multiwalled carbon nanotubes (MWCNTs) were fabricated to enhance the physical properties of the nanofibers, such as the elastic modulus and electrical conductivity. The ferritin was homogeneously incorporated in the polymeric nanofibers, but excess carbon nanotubes (CNTs) added to the polymer solution resulted in the fabrication of composite nanofibers with rough surfaces. PVA/ferritin/CNT composite nanofibers were fabricated that had smooth surfaces, and had a good dispersion of ferritin and CNTs. These composite nanofibers are applicable to artificial muscles requiring enhanced physical properties.

Metal oxide nanoparticles within the protein ferritin can act as an energy storage source in nano-bio batteries containing ferrous ferritin and a reconstituted ferritin cage containing different inorganic elements, such as Co, Mn, Ni, and Pt. These components were introduced as two ferritin half-cells with different redox potentials existing between the ferrous ferritin and the reconstituted ferritin. The reduction of ferritin was analyzed in a solution containing 3-[N-morpholino] propanesulfonic acid buffer and oxidized methyl viologen using cyclic voltammetry. The reduction and oxidation peaks of the methyl viologen occurred at potentials of −300 and −100 mV, respectively, and the reduction and the oxidation peaks of the released Fe occurred at potentials of −300 and −100 mV, respectively. The reduction of ferritin was influenced by the pH of the ferritin solution.

The swelling behavior of chitosan hydrogels in ionic liquid–water binary systems was studied using hydrophilic room-temperature ionic liquids (RTILs) to elucidate the swelling properties of chitosan hydrogels. It was confirmed that chitosan hydrogels are much stiffer after immersing in a pure RTIL because the water existing inside the chitosan polymer network is extracted into the RTIL. The pH of the binary system changes when the RTIL is in contact with water. The chitosan hydrogels were fully dissociated at a 90% water content in the BMI-BF4-water binary system. The equilibrium binary system content behavior of the chitosan hydrogels depended upon the amount of free water present. The water behavior in a pure RTIL was examined using differential scanning calorimetry.

Helical structures have been fabricated from a solution of poly(2-acrylamido-2-methyl-1-propane sulfonic acid) (PAMPS) in water and ethanol by the whipping instability of a jet in a conventional electrospinning system. The simple modification of the electrospinning system involved introducing two parallel subelectrodes, which enabled the transformation of helical nanofibers into linearly oriented nanofibers due to the tensional forces caused by the modified electric field. This means that the tensional forces caused by the modified electric field had an important effect on linearizing the helical structures. Therefore, a technique using modified electric fields can play a significant role as an intermediary between helical structures and one-dimensional linear structures.

Ferromagnetic Cu-doped GaN film was grown on a GaN-buffered sapphire (0001) substrate by a hybrid physical-chemical-vapor-deposition method (HPCVD). The GaCuN film (Cu: 3.6 at.%) has a highly c-axis-oriented hexagonal wurtzite crystal structure, which is similar to GaN buffer but without any secondary phases such as metallic Cu, CuxNy, and CuxGay compounds. Two weak near-band edge (NBE) emissions at 3.38 eV and donor-acceptor-pair (DAP) transition at 3.2 eV with a typical strong broad yellow emission were observed in photoluminescence spectra for GaN buffer. In contrast, the yellow emission was completely quenched in GaCuN film because Ga vacancies causing the observed yellow emission in undoped GaN were substituted by Cu atoms. In addition, GaCuN film exhibits a blue shift of NBE emission, which could be explained with the +2 oxidation state of Cu ions, replacing +3 Ga ions resulting in band gap increment. The valance sate of Cu in GaCuN film was also confirmed by x-ray photoelectron spectroscopy (XPS) analysis. The GaCuN film shows ferromagnetic ordering and possesses a residual magnetization of 0.12 emu/cm3 and a coercive field of 264 Oe at room temperature. The unpaired spins in Cu2+ ions (d9) are most likely to be responsible for the observed ferromagnetism in GaCuN.