Intracytoplasmic sperm injection (ICSI) is a technique that directly injects a single sperm into the cytoplasm of mature oocytes. Here, we explored the safety of single-sperm cryopreservation applied in ICSI. This retrospective study enrolled 186 couples undergoing ICSI-assisted pregnancy. Subjects were allocated to the fresh sperm (group A)/single-sperm cryopreservation (group B) groups based on sperm type, with their clinical baseline/pathological data documented. We used ICSI-compliant sperm for subsequent in vitro fertilization and followed up on all subjects. The recovery rate/cryosurvival rate/sperm motility of both groups, the pregnancy/outcome of women receiving embryo transfer, and the delivery mode/neonatal-related information of women with successful deliveries were recorded. The clinical pregnancy rate, cumulative clinical pregnancy rate, abortion rate, ectopic pregnancy rate, premature delivery rate, live birth delivery rate, neonatal birth defect rate, and average birth weight were analyzed. The two groups showed no significant differences in age, body mass index, ovulation induction regimen, sex hormone [anti-Müllerian hormone (AMH)/follicle-stimulating hormone (FSH)/luteinizing hormone (LH)] levels, or oocyte retrieval cycles. The sperm recovery rate (51.72%-100.00%) and resuscitation rate (62.09% ± 16.67%) in group B were higher; the sperm motility in the two groups demonstrated no significant difference and met the ICSI requirements. Group B exhibited an increased fertilization rate, decreased abortion rate, and increased safety versus group A. Compared with fresh sperm, the application of single-sperm cryopreservation in ICSI sensibly improved the fertilization rate and reduced the abortion rate, showing higher safety.

The objective of this study was to explore the geological origin of glauconite, which is believed to precipitate and mature very slowly (~1 Myr) in neritic environments (shallow water, oceanic coastal zones, at water depths of 100–200 m) with very low sedimentation rates. A series of simulation experiments was designed and carried out in sealed tubes placed in an oven and heated to a constant temperature of 50°C (±2°C) for 60 or 150 d. The parent materials used for these experiments were two low-Fe montmorillonites with different crystallinities. The montmorillonites were introduced to solutions with concentrations of 0.02–0.1 mol/L Fe3+ and 0.05–0.2 mol/L K+ with various values of pH and Eh. The products were analyzed using X-ray powder diffraction (XRD), Fourier-transform infrared (FTIR) spectrometry, electron spin resonance (ESR) spectrometry, scanning electron microscopy (SEM), and Mössbauer spectroscopy. The morphological changes from parent material to product were observed under SEM, which revealed the formation of a flaky mineral (e.g. a product formed in the interstitial spaces between montmorillonite crystals). The formation of a flaky mineral indicates that the product is a layer silicate. Qualitative analysis of XRD patterns revealed that the main product phase was a mica group mineral and the d060 value was consistent with the presence of glauconite (0.152 nm) and/or Fe-illite (0.150 nm). A glauconite and Fe-illite mineral assemblage formed in a weakly acidic solution, while Fe-illite, mixed-layer Fe-illite, and montmorillonite formed in neutral and alkaline solutions. Stretching vibrations of Fe(III)Fe(III)OH-AlFe(II)OH and/or MgFe(III)OH were observed in FTIR spectra (3550–3562 cm−1) of the products formed in acidic solutions, which along with the g = 1.978 ESR signal indicated that Fe(III) entered octahedral positions in the tetrahedral/octahedral/tetrahedral layer (TOT) platelets. The AlFe(II)OH-MgFe(III)OH (3550–3562 cm−1) and AlFe(III)OH (870 cm−1) vibrations were only observed in products formed in neutral and alkaline solutions. Analysis of the Mössbauer spectra showed that Fe(III) substituted for Al and Mg in the cis octahedral sites of montmorillonite. The simulation experiments demonstrated that the pH and redox conditions (Eh) of the environment controlled the nature of the product mineral species. Results of the present study revealed that glauconitization and illitization occurred under different conditions, where glauconitization preferentially occurred in an acidic environment and illitization preferentially occurred in a nearly neutral to alkaline environment.

HIV-1 molecular surveillance provides a new approach to explore transmission risks and targeted interventions. From January to June 2021, 663 newly reported HIV-1 cases were recruited in Zhaotong City, Yunnan Province, China. The distribution characteristics of HIV-1 subtypes and HIV-1 molecular network were analysed. Of 542 successfully subtyped samples, 12 HIV-1 strains were identified. The main strains were CRF08_BC (47.0%, 255/542), CRF01_AE (17.0%, 92/542), CRF07_BC (17.0%, 92/542), URFs (8.7%, 47/542), and CRF85_BC (6.5%, 35/542). CRF08_BC was commonly detected among Zhaotong natives, illiterates, and non-farmers and was mostly detected in Zhaoyang County. CRF01_AE was frequently detected among married and homosexual individuals and mostly detected in Weixin and Zhenxiong counties. Among the 516 pol sequences, 187 (36.2%) were clustered. Zhaotong natives, individuals aged ≥60 years, and illiterate individuals were more likely to be found in the network. Assortativity analysis showed that individuals were more likely to be genetically associated when stratified by age, education level, occupation, and reporting area. The genetic diversity of HIV-1 reflects the complexity of local HIV epidemics. Molecular network analyses revealed the subpopulations to focus on and the characteristics of the risk networks. The results will help optimise local prevention and control strategies.

The new mineral tennantite-(Ni), Cu6(Cu4Ni2)As4S13, has been discovered from the Luobusa Chromitite, Tibet, southwestern China. Tennantite-(Ni) occurs as anhedral grains ranging from 2 to 20 μm in size. In reflected light microscopy, tennantite-(Ni) is isotropic and appears yellow-greenish grey. Reflectance data for Commission on Ore Mineralogy wavelengths in air for tennantite-(Ni) are: 31.0 (470 nm), 29.6 (546 nm), 29.6 (589 nm) and 29.3 (650 nm). Electron microprobe analysis for holotype material gave the empirical formula (on basis of total cations = 16 apfu): M(2)Cu6 M(1)[Cu4.00(Ni0.97Cu0.53Fe0.50)Σ2.00]Σ6.00X(3)(As2.94Sb1.06)Σ4S12.77. Tennantite-(Ni) is cubic, with space group I$\bar{ 4}$3m (#217), a =10.2957(9) Å, V = 1091.4(3) Å3 and Z = 2. By using single-crystal X-ray diffraction, the crystal structure has been determined and refined to a final R1 = 0.0423 on the basis of 163 independent reflections [Fo > 4σ (Fo)]. The calculated seven strongest powder X-ray diffraction lines [d in Å (I) (hkl)] are: 2.972 (100) (222), 1.820 (83) (440), 2.574 (28) (400), 1.552 (18) (622), 3.640 (10) (220), 1.880 (10) (521) and 1.287 (7) (800). Tennantite-(Ni) is isostructural with other tetrahedrite-group minerals, and nickel is hosted at the tetrahedrally coordinated M(1) site, along with Cu and minor Fe. The mineral and its name have been approved by the Commission on New Minerals, Nomenclature and Classification of the International Mineralogical Association (IMA2021-018).

This study aimed to determine the impact of current hepatitis B virus (HBV) infection on patients hospitalised with sepsis. This was a retrospective cohort study. Patients from three medical centres in Suzhou from 10 January 2016 to 23 July 2022 participated in this study. Demographic characteristics and clinical characteristics were collected. A total of 945 adult patients with sepsis were included. The median age was 66.0 years, 68.6% were male, 13.1% presented with current HBV infection, and 34.9% of all patients died. In the multivariable-adjusted Cox model, patients with current HBV infection had significantly higher mortality than those without (hazard ratio (HR) 1.50, 95% confidence interval (CI) 1.11–2.02). A subgroup analysis showed that being infected with HBV significantly increased in-hospital mortality in patients younger than 65 years old (HR 1.74, 95% CI 1.16–2.63), whereas no significant impact was observed in patients ≥65 years. The propensity score-matched case–control analysis showed that the rate of septic shock (91.4% vs. 62.1%, P < 0.001) and in-hospital mortality (48.3% vs. 35.3%, P = 0.045) were much higher in the propensity score-matched HBV infection group compared with the control group. In conclusion, current HBV infection was associated with mortality in adults with sepsis.

As optical parametric chirped pulse amplification has been widely adopted for the generation of extreme intensity laser sources, nonlinear crystals of large aperture are demanded for high-energy amplifiers. Yttrium calcium oxyborate (YCa4O(BO3)3, YCOB) is capable of being grown with apertures exceeding 100 mm, which makes it possible for application in systems of petawatt scale. In this paper, we experimentally demonstrated for the first time to our knowledge, an ultra-broadband non-collinear optical parametric amplifier with YCOB for petawatt-scale compressed pulse generation at 800 nm. Based on the SG-II 5 PW facility, amplified signal energy of approximately 40 J was achieved and pump-to-signal conversion efficiency was up to 42.3%. A gain bandwidth of 87 nm was realized and supported a compressed pulse duration of 22.3 fs. The near-field and wavefront aberration represented excellent characteristics, which were comparable with those achieved in lithium triborate-based amplifiers. These results verified the great potential for YCOB utilization in the future.

Copy number variation (CNV) is a very common type of gene variation with high frequency. In recent years, CNV has been paid more attention in various fields, especially in livestock and poultry breeding, which has promoted the progress of breeding. WW domain binding protein 1-like (WBP1L) is a protein coding gene, which plays an important role in cattle populations, and its function has been extensively studied, but it is not clear whether the copy number of the gene can affect the growth and development of cattle populations. In this study, CNV of WBP1L gene was detected in 732 cattle of seven breeds (Qinchuan cattle, QC; Pinan cattle, PN; Yuengling cattle, YL; Xianan cattle, XN; Jiaxian cattle, JX; natural Guyuan cattle, NGY; Jian cattle, JA). In addition, the relationship between CNV and growth phenotype of cattle was studied. The experimental data indicate that the copy number of WBP1L was obviously correlated with heart girth of PN cattle (**P < 0.01), rump length (RL) and body weight (BW) of PN cattle (*P < 0.05), withers height (WH), RL, body length, chest depth and BW of JX cattle (*P < 0.05), WH of NGY cattle (*P < 0.05) and WH of JA cattle (*P < 0.05). It was proved that CNV of WBP1L gene could be used as molecular marker locus for genetic breeding of the above four cattle breeds.

Coastal surveillance video helps officials to obtain on-site visual information on maritime traffic situations, which benefits building up the maritime transportation detection infrastructure. The previous ship detection methods focused on detecting distant small ships in maritime videos, with less attention paid to the task of ship detection from coastal surveillance video. To address this challenge, a novel framework is proposed to detect ships from coastal maritime images in three typical traffic situations in three consecutive steps. First the Canny detector is introduced to determine the potential ship edges in each maritime frame. Then, the self-adaptive Gaussian descriptor is employed to accurately rule out noisy edges. Finally, the morphology operator is developed to link the detected separated edges to connected ship contours. The model's performance is tested under three typical maritime traffic situations. The experimental results show that the proposed ship detector achieved satisfactory performance (in terms of precision, accuracy and time cost) compared with other state-of-the-art algorithms. The findings of the study offer the potential of providing real-time visual traffic information to maritime regulators, which is crucial for the development of intelligent maritime transportation.

The present study evaluated whether fat mass assessment using the triceps skinfold (TSF) thickness provides additional prognostic value to the Global Leadership Initiative on Malnutrition (GLIM) framework in patients with lung cancer (LC). We performed an observational cohort study including 2672 LC patients in China. Comprehensive demographic, disease and nutritional characteristics were collected. Malnutrition was retrospectively defined using the GLIM criteria, and optimal stratification was used to determine the best thresholds for the TSF. The associations of malnutrition and TSF categories with survival were estimated independently and jointly by calculating multivariable-adjusted hazard ratios (HR). Malnutrition was identified in 808 (30·2 %) patients, and the best TSF thresholds were 9·5 mm in men and 12 mm in women. Accordingly, 496 (18·6 %) patients were identified as having a low TSF. Patients with concurrent malnutrition and a low TSF had a 54 % (HR = 1·54, 95 % CI = 1·25, 1·88) greater death hazard compared with well-nourished individuals, which was also greater compared with malnourished patients with a normal TSF (HR = 1·23, 95 % CI = 1·06, 1·43) or malnourished patients without TSF assessment (HR = 1·31, 95 % CI = 1·14, 1·50). These associations were concentrated among those patients with adequate muscle mass (as indicated by the calf circumference). Additional fat mass assessment using the TSF enhances the prognostic value of the GLIM criteria. Using the population-derived thresholds for the TSF may provide significant prognostic value when used in combination with the GLIM criteria to guide strategies to optimise the long-term outcomes in patients with LC.

The present study aimed to investigate the association of early-life exposure to famine with abdominal fat accumulation and function and further evaluate the influence of first-degree family history of diabetes and physical activity on this association. The present work analysed parts of the REACTION study. A total of 3033 women were enrolled. Central obesity was defined as waist circumferences (W) ≥ 85 cm. Chinese visceral adiposity index (CVAI) was used to evaluate visceral adipose distribution and function. Partial correlation analysis showed BMI, W, glycated Hb and CVAI were associated with early-life exposure to famine (both P < 0·05). Logistic regression showed that the risks of overall overweight/obesity and central obesity in fetal, early-childhood, mid-childhood and late-childhood exposed subgroups were increased significantly (all P < 0·05). Compared with the non-exposed group, the BMI, W and CVAI of fetal, early- to late-childhood exposed subgroups were significantly increased both in those with or without first-degree family history of diabetes and in those classified as physically active or inactive, respectively (all P < 0·05). The associations of BMI, W and CVAI with early-life exposure to famine were independent of their associations with first-degree family history of diabetes (all P < 0·01) or physical activity status (all P < 0·001). Early-life exposure to famine contributed to abdominal fat accumulation and dysfunction, which was independent of the influence of genetic background and exercise habits. Physical activity could serve as a supplementary intervention for women with high risk of central obesity.

HIV-1 drug resistance can compromise the effectiveness of antiretroviral therapy (ART). A survey of pretreatment HIV-1 drug resistance (PDR) was conducted in Lincang Prefecture of Yunnan Province. From 372 people living with HIV/AIDS initiating ART for the first time during 2017–2018, 322 pol sequences were obtained, of which 11 HIV-1 strain types were detected. CRF08_BC (70.2%, 226/322) was the predominant strain, followed by URF strains (10.6%, 34/322). Drug resistance mutations (DRMs) were detected among 34.2% (110/322) of the participants. E138A/G/K/R (14.3%, 46/322) and V179E/D/T (13.7%, 47/322) were the predominant DRMs. Specifically, E138 mutations commonly occurred in CRF08_BC (19.9%, 45/226). Among the DRMs detected, some independently conferred resistance, such as K65R (1.6%, 5/322), Y188C/F/L (0.9%, 3/322), K103N (0.6%, 2/322) and G190A (0.3%, 1/322), which conferred high-level resistance. The prevalence of PDR was 7.5% (95% CI: 4.6–10.3%) and the prevalence of non-nucleotide reverse transcriptase inhibitor (NNRTI) resistance was 5.0% (95% CI: 2.6–7.4%), which is below the threshold (⩾10%) of initiating a public health response. In conclusion, HIV-1 genetic diversity and an overall moderate level of PDR prevalence were found in western Yunnan. PDR surveillance should be continually performed to decide whether a public health response to NNRTI resistance should be initiated.

A solution to the problem of Gaussian beam scattering by a circular perfect electric conductor coated with eccentrically anisotropic media is presented. The incident Gaussian beam source is expanded as an approximate expression in the simple form with Taylor's series. The transmitted field in the anisotropically coated region is expressed as an infinite summation of Eigen plane waves with different polar angles. The unknown coefficients of the scattered fields are obtained with the aid of the boundary conditions. The addition theorem for cylindrical functions is applied to transfer from the local coordinates to the global ones. The infinite series can be truncated under the prerequisite of achieving the solution convergence. Only the case of transverse-electric polarization is discussed. The similar formulation of transverse-magnetic polarization can be obtained by adopting a similar method. Some numerical results are presented and discussed. The result is in agreement with that available as expected when the eccentric geometry comes to the concentric one.

This paper presents a low insertion loss low-pass filter based on the spoof surface plasmon polariton (SSPP) with single comb-shape. Compared with traditional ones, the proposed filter provides lower insertion loss and return loss by optimizing the structural parameters of the mode conversion and SSPP parts. According to the measurement results, the average insertion loss of the fabricated filter is 0.41 dB and the return loss of which at the near-zero-hertz band is <−25.9 dB. The S parameter comparison result between the unoptimized and optimized filters demonstrates that the optimized filter provides lower insertion loss and return loss, smaller size, and better out-of-band rejection. The dispersion comparison result reveals the reasons behind the improved performances. The better performances of the optimized filter proves that breaking the regularity of traditional SSPP filters is beneficial to the filter's performances.

A dualband rejection filter and a triband rejection filter are proposed in this letter, both of which are implemented by cascading spoof surface plasmon polaritons (SSPPs) of the same structure but with diverse rejection bands. Compared with traditional ones, the proposed filters provide more compact structures, wider rejection bands, and better independent tunability. In the proposed filters, the rejection bandwidth, the center frequency of the rejection band and the filter's cutoff frequency can be adjusted independently. And the different rejection bands in the same filter also can be independently controlled. Agreements between the dispersion of SSPP units and the S21 of filters are also presented. Measurement results demonstrate that both filters load multiple rejection bands on the 27.7 GHz wide low-pass band and all the rejection bands locate in Ku and K bands. The average rejection bandwidth and the average rejection depth of the two filters are 1.49 GHz and 42.1 dB, respectively.

The high cohesive interaction between reduced graphene oxide (RGO) sheets usually makes them difficult to disperse, which limits their utilization in achieving effective hybridization with polymers. We report here a new two-step route for preparing non-aggregated and high-conductive RGO powders. Graphene oxide precursor was first reduced by hydrazine hydrate in presence of a thermal unstable surfactant of cetyltrimethylammonium chloride (CTAC). Then a thermal annealing process under H2/Ar atmosphere was further used to remove the non-conductive CTAC molecules. The prepared RGO powder exhibited an electrical conductivity of 2.23 × 104 S m−1 – about ten times higher than the one (N-RGO) simply reduced by hydrazine hydrate. After incorporating into polymethylmethacrylate with a 5 wt% loading, the composite showed a conductivity of 4.11 S m−1, which was 60 times as high as that of the same composite based on N-RGO powder. The addition and subsequent removal of CTAC molecules is an effective method for preparing non-aggregated and highly conductive graphene powder and obtaining good incorporation into polymer matrices.

We report the fabrication of AlGaN/GaN high electron mobility transistors (MIS-HEMTs) with a high breakdown voltage by employing a metal-insulator-semiconductor (MIS) gate structure using Si3N4 insulator. The Si3N4 films were deposited by plasma enhanced chemical vapor deposition (PECVD) as the surface passivation, interlayer films and the gate dielectric. In comparison with Schottky-gate HEMTs, the gate leakage currents of MIS-HEMTs exhibited three orders of magnitude reduction. With similar device structures, the off-state breakdown voltage of MIS-HEMTs was 1050 V with a specific on-resistance of 4.0 mΩ cm2, whereas the breakdown voltage and specific on-resistance of SG-HEMTs were 740 V and 4.4 mΩ cm2, respectively. In addition, the MIS-HEMTs exhibited little current slump in the pulsed measurements and possessed faster switch speed than Si MOSFET. We demonstrate that AlGaN/GaN MIS-HEMTs are promising not only for microwave applications but also for high power switching applications.