Listeriosis is a rare but serious foodborne disease caused by Listeria monocytogenes. This matched case–control study (1:1 ratio) aimed to identify the risk factors associated with food consumption and food-handling habits for the occurrence of sporadic listeriosis in Beijing, China. Cases were defined as patients from whom Listeria was isolated, in addition to the presence of symptoms, including fever, bacteraemia, sepsis and other clinical manifestations corresponding to listeriosis, which were reported via the Beijing Foodborne Disease Surveillance System. Basic patient information and possible risk factors associated with food consumption and food-handling habits were collected through face-to-face interviews. One hundred and six cases were enrolled from 1 January 2018 to 31 December 2020, including 52 perinatal cases and 54 non-perinatal cases. In the non-perinatal group, the consumption of Chinese cold dishes increased the risk of infection by 3.43-fold (95% confidence interval 1.27–9.25, χ2 = 5.92, P = 0.02). In the perinatal group, the risk of infection reduced by 95.2% when raw and cooked foods were well-separated (χ2 = 5.11, P = 0.02). These findings provide important scientific evidence for preventing infection by L. monocytogenes and improving the dissemination of advice regarding food safety for vulnerable populations.

External modulation on thermal convection has been studied extensively to achieve the control of flow structures and heat-transfer efficiency. In this paper, we carry out direct numerical simulations on Rayleigh–Bénard convection accounting for both the modulation of wall shear and roughness over the Rayleigh number range $1.0 \times 10^6 \le Ra \le 1.0 \times 10^8$, the wall shear Reynolds number range $0 \le Re_w \le 5000$, the aspect-ratio range $2 \le \varGamma \le 4{\rm \pi}$, and the dimensionless roughness height range $0 \le h \le 0.2$ at fixed Prandtl number $Pr = 1$. Under the combined actions of wall shear and roughness, with increasing $Re_w$, the heat flux is initially enhanced in the buoyancy-dominant regime, then has an abrupt transition near the critical shear Reynolds number $Re_{w,cr}$, and finally enters the purely diffusion regime dominated by shear. Based on the crossover of the kinetic energy production between the buoyancy-dominant and shear-dominant regimes, a physical model is proposed to predict the transitional scaling behaviour between $Re_{w,cr}$ and $Ra$, i.e. $Re_{w,cr} \sim Ra^{9/14}$, which agrees well with our numerical results. The reason for the observed heat-transport enhancement in the buoyancy-dominant regime is further explained by the fact that the moving rough plates introduce an external shear to strengthen the large-scale circulation (LSC) in the vertical direction and serve as a conveyor belt to increase the chances of the interaction between the LSC and secondary flows within cavities, which triggers more thermal plumes, efficiently transports the trapped hot (cold) fluids outside cavities.

Methomyl is a broad-spectrum carbamate insecticide that has a variety of toxic effects on humans and animals. However, there have been no studies on the toxicity of methomyl in female mammalian oocytes. This study investigated the toxic effects of environmental oestrogen methomyl exposure on mouse oocyte maturation and its possible mechanisms. Our results indicated that methomyl exposure inhibited polar body extrusion in mouse oocytes. Compared with that in the control group, in the methomyl treatment group, superoxide anion free radicals in oocytes were significantly increased. In addition, the mitochondrial membrane potential of metaphase II stage oocytes in the methomyl treatment group was significantly decreased, resulting in reduced mouse oocyte quality. After 8.5 h of exposure to methomyl, metaphase I stage mouse oocytes displayed an abnormal spindle morphology. mRNA expression of the pro-apoptotic genes Bax and Caspase-3 in methomyl-treated oocytes increased, which confirmed the apoptosis. Collectively, our results indicated that mouse oocyte maturation is defective after methomyl treatment at least through disruption of spindle morphology, mitochondrial function and by induction of oxidative stress.

Chronic inflammation exerts pleiotropic effects in the aetiology and progression of chronic obstructive pulmonary disease (COPD). Glucosamine is widely used in many countries and may have anti-inflammatory properties. We aimed to prospectively evaluate the association of regular glucosamine use with incident COPD risk and explore whether such association could be modified by smoking in the UK Biobank cohort, which recruited more than half a million participants aged 40–69 years from across the UK between 2006 and 2010. Cox proportional hazards models with adjustment for potential confounding factors were used to calculate hazard ratios (HR) as well as 95 % CI for the risk of incident COPD. During a median follow-up of 8·96 years (interquartile range 8·29–9·53 years), 9016 new-onset events of COPD were documented. We found that the regular use of glucosamine was associated with a significantly lower risk of incident COPD with multivariable adjusted HR of 0·80 (95 % CI, 0·75, 0·85; P < 0·001). When subgroup analyses were performed by smoking status, the adjusted HR for the association of regular glucosamine use with incident COPD were 0·84 (0·73, 0·96), 0·84 (0·77, 0·92) and 0·71 (0·62, 0·80) among never smokers, former smokers and current smokers, respectively. No significant interaction was observed between glucosamine use and smoking status (Pfor interaction = 0·078). Incident COPD could be reduced by 14 % to 84 % through a combination of regular glucosamine use and smoking cessation.

We carry out direct numerical simulations of turbulent Rayleigh–Bénard convection in a square box with rough conducting plates over the Rayleigh number range $10^7\leqslant Ra\leqslant 10^9$ and the Prandtl number range $0.01\leqslant Pr\leqslant 100$. In Zhang et al. (J. Fluid Mech., vol. 836, 2018, R2), it was reported that while the measured Nusselt number $Nu$ is enhanced at large roughness height $h$, the global heat transport is reduced at small $h$. The division between the two regimes yields a critical roughness height $h_c$, and we now focus on the effects of the Prandtl number ($Pr$) on $h_c$. Based on the variations of $h_c$, we identify three regimes for $h_c(Pr)$. For low $Pr$, thermal boundary layers become thinner with increasing $Pr$. This makes the boundary layers easier to be disrupted by rough elements, leading to the decrease of $h_c$ with increasing $Pr$. For moderate $Pr$, the corner-flow rolls become much more pronounced and suppress the global heat transport via the competition between the corner-flow rolls and the large-scale circulation (LSC). As a consequence, $h_c$ increases with increasing $Pr$ due to the intensification of the corner–LSC competition. For high $Pr$, the convective flow transitions to the plume-controlled regime. As the rough elements trigger much stronger and more frequent plume emissions, $h_c$ again decreases with increasing $Pr$.

Electrospun membranes have potential applications in the field of waterproof and breathable textile products. However, challenges still exist to improve the breathability, and waterproof and mechanical properties of these microporous membranes. In this paper, a novel hydrophobic microporous nanofiber membrane was prepared via side-by-side electrospinning of fluorosilane-modified silica nanoparticles (F–SiO2) blended with synthesized polyurethane (PU) solution and composited with the polyacrylonitrile (PAN) solution. To prepare F–SiO2, SiO2 nanoparticles were hydrophobically modified by fluorosilane. Composite nanofiber membranes with different blending ratios of PU(F–SiO2)/PAN were fabricated via side-by-side electrospinning by controlling the extruding speed of two spinnerets. Experimental results indicated that regarding F–SiO2 as hydrophobic inorganic particle can improve the hydrophobic properties of PU nanofiber membrane. The prepared PAN/(F–SiO2/PU) nanofiber microporous membranes exhibit relatively excellent waterproof and mechanical properties as that robust tensile strength (19.5 MPa), preferable water vapor permeability [10.3 kg/(m2 d)], favorable water contact angle (137.2°), and superior mechanical properties. It was believed that the reinforced PAN/(F–SiO2/PU) nanofibrous composite membranes have potential applications in chemical protective clothing, army combat uniforms, self-cleaning materials, and other medical products.

The association between milk consumption and the metabolic syndrome remains inconclusive, and data from Chinese populations are scarce. We conducted a cross-sectional study to investigate the association between milk consumption and the metabolic syndrome and its components among the residents of Suzhou Industrial Park, Suzhou, China. A total of 5149 participants were included in the final analysis. A logistic regression model was applied to estimate the OR and 95 % CI for the prevalence of the metabolic syndrome and its components according to milk consumption. In addition, the results of our study were further meta-analysed with other published observational studies to quantify the association between the highest v. lowest categories of milk consumption and the metabolic syndrome and its components. There was no significant difference in the odds of having the metabolic syndrome between milk consumers and non-milk consumers (OR 0·86, 95 % CI 0·73, 1·01). However, milk consumers had lower odds of having elevated waist circumference (OR 0·78, 95 % CI 0·67, 0·92), elevated TAG (OR 0·83, 95 % CI 0·70, 0·99) and elevated blood pressure (OR 0·85, 95 % CI 0·73, 0·99). When the results were pooled together with other published studies, higher milk consumption was inversely associated with the risk of the metabolic syndrome (relative risk 0·80, 95 % CI 0·72, 0·88) and its components (except elevated fasting blood glucose); however, these results should be treated with caution as high heterogeneity was observed. In summary, the currently available evidence from observational studies suggests that higher milk consumption may be inversely associated with the metabolic syndrome.

We examined the in vitro developmental competence of parthenogenetic activation (PA) oocytes activated by an electric pulse (EP) and treated with various concentrations of AZD5438 for 4 h. Treatment with 10 µM AZD5438 for 4 h significantly improved the blastocyst formation rate of PA oocytes in comparison with 0, 20, or 50 µM AZD5438 treatment (46.4% vs. 34.5%, 32.3%, and 24.0%, respectively; P < 0.05). The blastocyst formation rate was higher in the group treated with AZD5438 for 4 h than in the groups treated with AZD5438 for 2 or 6 h (42.8% vs. 38.6% and 37.2%, respectively; P > 0.05). Furthermore, 66.67% of blastocysts derived from these AZD5438-treated PA oocytes had a diploid karyotype. The blastocyst formation rate of PA and somatic cell nuclear transfer (SCNT) embryos was similar between oocytes activated by an EP and treated with 2 mM 6-dimethylaminopurine for 4 h and those activated by an EP and treated with 10 µM AZD5438 for 4 h (11.11% vs. 13.40%, P > 0.05). In addition, the level of maturation-promoting factor (MPF) was significantly decreased in oocytes activated by an EP and treated with 10 µM AZD5438 for 4 h. Finally, the mRNA expression levels of apoptosis-related genes (Bax and Bcl-2) and pluripotency-related genes (Oct4, Nanog, and Sox2) were checked by RT-PCR; however, there were no differences between the AZD5438-treated and non-treated control groups. Our results demonstrate that porcine oocyte activation via an EP in combination with AZD5438 treatment can lead to a high blastocyst formation rate in PA and SCNT experiments.

In this work, the high-performance silicon carbide particle SiCp[carbon nanotube (CNT)] hybrid reinforcement is currently explored to develop the advanced metal matrix composites. 17 wt% SiCp(CNT)/Al composites were fabricated by a powder metallurgy technique, in which SiCp(CNT) hybrid reinforcement with various CNT contents (e.g., 3, 6 and 9 wt%) were applied. Effects of CNT content on the morphology of SiCp(CNT) hybrid reinforcement, the microstructural characteristics, and the tensile mechanical behavior of SiCp(CNT)/Al composites were studied as well. Especially, the SiCp(CNT)/Al composites with 6 wt% CNT in SiCp(CNT) hybrid reinforcement exhibited the most significant enhancing effects in the elastic modulus and tensile strength. Meanwhile, the SiCp(CNT)/Al composites produced a synergistic strengthening effect of SiCp and CNT compared to SiCp/Al composites, while the SiCp(CNT)/Al composites with high CNT content in SiCp(CNT) hybrid reinforcement provided weak improvement in the tensile strength and ductility due to the forming agglomeration of CNT in the matrix.

An effective multiplex real-time polymerase chain reaction (PCR) assay for the simultaneous detection of three major pathogens, Nosema bombycis Nägeli (Microsporidia: Nosematidae), Bombyx mori nucleopolyhedrovirus (Baculoviridae: genus Alphabaculovirus) (NPV), and Bombyx mori densovirus (Parvoviridae: genus Iteravirus) (DNV), in silkworms (Bombyx mori (Linnaeus); Lepidoptera: Bombycidae) was developed in this study. Polymerase chain reaction and real-time PCR tests and basic local alignment search tool searches revealed that the primers and probes used in this study had high specificities for their target species. The ability of each primer/probe set to detect pure pathogen DNA was determined using a plasmid dilution panel, in which under optimal conditions the multiplex real-time PCR assay showed high efficiency in the detection of three mixed target plasmids with a detection limit of 8.5×103 copies for N. bombycis and Bombyx mori NPV (BmNPV) and 8.5×104 copies for Bombyx mori DNV (BmDNV). When the ability to detect these three pathogens was examined in artificially inoculated silkworms, our method presented a number of advantages over traditional microscopy, including specificity, sensitivity, and high-throughput capabilities. Under the optimal volume ratio for the three primer/probe sets (3:2:2=N. bombycis:BmNPV:BmDNV), the multiplex real-time PCR assay showed early detection of BmNPV and BmDNV by day 1 post inoculation using DNA templates of the three pathogens in various combinations from individually infected silkworms; the early detection of N. bombycis was possible by day 3 post inoculation using the DNA isolated from the midgut of N. bombycis-infected silkworms.

We present a novel route to fabricate 3D nanoporous α-Ti foams by dealloying of TiCu master alloy in solid state using Mg powders. Pure open-cell nanoporous α-Ti foams are fabricated with BET surface area of 34.4 ± 0.8 m2/g and pore size in the range of 2–50 nm. The dealloying using powders is a solid state chemical reaction process to form Cu2Mg phase and Ti/Mg nanocomposites. The constituent of Cu in the TiCu alloy was dissolved into Mg powders thanks to the kinetics of interface reaction and volume diffusion. The pore-forming mechanism is a solid-state interdiffusion process. The ligament coarsening is from 492 to 650 nm with increasing of the dealloying temperature. The hardness and elastic modulus in nanoporous α-Ti foam follow linear decay fit with ligament size increasing. Our results demonstrate a facile strategy for the fabrication of nanoporous Ti foams with novel nanostructures and tailored properties.

Mean curvature-based image registration model firstly proposed by Chumchob-Chen-Brito (2011) offered a better regularizer technique for both smooth and nonsmooth deformation fields. However, it is extremely challenging to solve efficiently this model and the existing methods are slow or become efficient only with strong assumptions on the smoothing parameter β. In this paper, we take a different solution approach. Firstly, we discretize the joint energy functional, following an idea of relaxed fixed point is implemented and combine with Gauss-Newton scheme with Armijo's Linear Search for solving the discretized mean curvature model and further to combine with a multilevel method to achieve fast convergence. Numerical experiments not only confirm that our proposed method is efficient and stable, but also it can give more satisfying registration results according to image quality.

Insect defensins, are cationic peptides that play an important role in immunity against microbial infection. In the present study, an anionic defensin from Plutella xylostella, (designated as PxDef) was first cloned and characterized. Amino acid sequence analysis showed that the mature peptide owned characteristic six-cysteine motifs with predicted isoelectric point of 5.57, indicating an anionic defensin. Quantitative real-time polymerase chain reaction analysis showed that PxDef was significantly induced in epidermis, fat body, midgut and hemocytes after injection of heat-inactivated Bacillus thuringiensis, while such an induction was delayed by the injection of live B. thuringiensis in the 4th instar larvae of P. xylostella. Knocking down the expression of nuclear transcription factor Dorsal in P. xylostella by RNA interference significantly decreased the mRNA level of PxDef, and increased the sensitivity of P. xylostella larvae to the infection by live B. thuringiensis. The purified recombinant mature peptide (PxDef) showed higher activity against Gram-positive bacteria, with the minimum inhibition concentrations of 1.6 and 2.6 µM against B. thuringiensis and Bacillus subtilis, respectively. To our knowledge, this is the first report about an anionic PxDef, which may play an important role in the immune system of P. xylostella against B. thuringiensis.

Disaster can strike people in any community at any time anywhere in the world. Disasters occur with high frequency, take on multiple forms, and exert wide influence, typically causing property damage, injuries, and death. As the world’s largest developing country, China incurs great costs when a disaster hits. After the Wenchuan earthquake in 2008, the Chinese government focused its attention on the construction of an emergency response system, the creation of disaster prevention and mitigation systems, and the development of a disaster medicine program. Here, we describe the current status of disaster medicine in China, focusing on the following four aspects: the Emergency Management System, Education & Training, Rescue Practices, and Research. We also discuss the future of disaster medicine in China. (Disaster Med Public Health Preparedness. 2018;12:157–165)

Tolerance of transgressions can influence the social cognitive and moral development of children and adolescents. Given the prevalent tolerance for bribery throughout the developing world and in China, the present research identified bribery as a serious transgression and investigated the various effects of moral evaluations and descriptive norms on transgression tolerance with increasing age. Thus, two studies examined these effects among primary, middle, and high school students (N = 972, 10-, 13-, and 16-year-olds). In Study 1, students’ transgression tolerance was negatively influenced by moral evaluations, and no age trend emerged. However, students reported more transgression tolerance with age owing to their increasing understanding of descriptive norms. In Study 2, the descriptive norms were manipulated: individuals in the high descriptive norm condition showed greater transgression tolerance than those in the low descriptive norm condition. An increasing tolerance of transgressions was observed only for those in the high descriptive norm condition. The effect of descriptive norms was found to contribute to the transgression tolerance trend.