The Wood Snipe Gallinago nemoricola is one of the least known shorebird species, and its habitat associations are very poorly understood. Here we provide the first assessment of the habitat use of the Wood Snipe during the breeding season. Between May and July 2021 at a 4-km2 alpine meadow in Sichuan province, China, we conducted population surveys and behavioural observations to identify sites where breeding Wood Snipe occurred and foraged. We quantified the habitat characteristics and food resource availability of these sites and compared them with randomly selected “background” sites. Comparison between 34 occurrence sites and 25 background sites indicated that during the breeding season, Wood Snipes are not distributed evenly across alpine meadow habitats, but preferred habitats in the lower part (3,378–3,624 m) of the alpine meadow with intermediate levels of soil moisture. In addition, comparison between 17 foraging sites and 24 background sites showed that the Wood Snipe tended to forage at sites with higher soil fauna abundance. We found weak evidence for denser vegetation cover at its height and no evidence for other biotic habitat variables such as vegetation composition or other abiotic habitat variables such as slope, soil penetrability, or disturbance level to influence Wood Snipe habitat associations. Our results suggest that the actual distribution range of the Wood Snipe during the breeding season may be smaller than expected from the extent of apparently suitable habitat. We advise caution in evaluating the potential habitat availability and distribution of the Wood Snipe, and call for further research to better understand the ecology of this rare species to inform its conservation.

High-molecular-weight glutenin subunits (HMW-GS) contribute to dough elasticity and bread baking quality in wheat. In this study, wheat varieties were classified based on their HMW-GS composition into three groups: 1Dx5 (5 + 10, Gaoyou 8901, Xinmai 28, Xinmai 19, Xinmai 26 and Jinbaoyin), 1Dx2 (2 + 12, Zhoumai 24, Xinmai 9 and Yumai) and 1Dx4 (4 + 12, Aikang 58). Sequence analysis showed that 1Dx-GY8901, 1Dx-XM28, 1Dx-XM19 and 1Dx-XM26 were similar to the 1Dx5 gene and clustered on the same branch, while 1Dx-AK58, 1Dx-ZM24, 1Dx-JBY, 1Dx-YM, 1Dx-XM9 and 1Dx-JBY were more similar to the 1Dx2 gene and clustered on the same branch with 1Dx.2.2. There was a mutation of Ser to Cys at position S2, for an extra Cys in the repeat regions of 1Dx-XM19, 1Dx-XM26, 1Dx-XM28 and 1Dx-GY8901. The wheat HMW-GS genes exhibited similar percentages of α-helix, extended strand, β-turn and random coil structure, with ranges of 13.33–13.59, 4.77–5.78, 7.08–9.18 and 72.3–73.94%, respectively. Sequence conservation and the composition of HMW-GS subunits were also analysed for a series of strong gluten wheat varieties, Xinmai 9 (1, 7 + 8, 2 + 12), Xinmai 19 (1, 7 + 9, 5 + 10), Xinmai 26 (1, 7 + 8, 5 + 10) and Xinmai 28 (1, 7 + 9, 5 + 10). The results of this work should facilitate future breeding efforts and provide the theoretical basis for wheat quality improvement.

Due to the lack of research between the inner layers in the structure of colonic mucous and the metabolism of fatty acid in the constipation model, we aim to determine the changes in the mucous phenotype of the colonic glycocalyx and the microbial community structure following treatment with Rhubarb extract in our research. The constipation and treatment models are generated using adult male C57BL/6N mice. We perform light microscopy and transmission electron microscopy (TEM) to detect a Muc2-rich inner mucus layer attached to mice colon under different conditions. In addition, 16S rDNA sequencing is performed to examine the intestinal flora. According to TEM images, we demonstrate that Rhubarb can promote mucin secretion and find direct evidence of dendritic structure-linked mucus structures with its assembly into a lamellar network in a pore size distribution in the isolated colon section. Moreover, the diversity of intestinal flora has noticeable changes in constipated mice. The present study characterizes a dendritic structure and persistent cross-links have significant changes accompanied by the alteration of intestinal flora in feces in models of constipation and pretreatment with Rhubarb extract.

The orogenic process and crustal growth of the Changning–Menglian Palaeo-Tethys orogenic belt in the southeastern Tibetan Plateau is not fully understood. Triassic Caojian rhyolites and granites occur extensively in this orogenic belt and represent important constraints for this issue. This study aims to examine the relationships between the Triassic Caojian rhyolites and granites and to gain a better understanding of their possible petrogenesis. The study used zircon U–Pb geochronology, trace element analyses and Sr–Nd–Hf isotope data to better understand the relationships and possible origin of the rhyolites and granites. Recent zircon U–Pb ages indicated that the Caojian rhyolites were emplaced at 227.2 Ma, whereas age estimates for Caojian granites were slightly older (233.4–236.9 Ma). The Caojian rhyolites are enriched in large-ion lithophile elements and high-field-strength elements, with elevated FeOtot/MgO and Ga/Al ratios. However, they are significantly depleted in Ba, Sr, Eu, P and Ti. These geochemical characteristics indicate that they have an A-type affinity. Furthermore, the Caojian granites comprise biotite monzogranites and granodiorites and show unfractionated composition. Mineralogically, the Caojian granites were found to contain diagnostic I-type minerals such as hornblende. Geochemical data suggest that the petrogenesis of the Triassic Caojian rhyolites is characterized by rejuvenation of crystal mush represented by the Triassic Caojian granites. The necessary thermal input was supplied by mafic magma. This magmatic evolution was likely related to lithospheric delamination and upwelling of the asthenosphere during the Mid- to Late Triassic, forming post-collisional I-type granites and A-type volcanics in the Changning–Menglian Palaeo-Tethys orogenic belt.

Chronic inflammation exerts pleiotropic effects in the aetiology and progression of chronic obstructive pulmonary disease (COPD). Glucosamine is widely used in many countries and may have anti-inflammatory properties. We aimed to prospectively evaluate the association of regular glucosamine use with incident COPD risk and explore whether such association could be modified by smoking in the UK Biobank cohort, which recruited more than half a million participants aged 40–69 years from across the UK between 2006 and 2010. Cox proportional hazards models with adjustment for potential confounding factors were used to calculate hazard ratios (HR) as well as 95 % CI for the risk of incident COPD. During a median follow-up of 8·96 years (interquartile range 8·29–9·53 years), 9016 new-onset events of COPD were documented. We found that the regular use of glucosamine was associated with a significantly lower risk of incident COPD with multivariable adjusted HR of 0·80 (95 % CI, 0·75, 0·85; P < 0·001). When subgroup analyses were performed by smoking status, the adjusted HR for the association of regular glucosamine use with incident COPD were 0·84 (0·73, 0·96), 0·84 (0·77, 0·92) and 0·71 (0·62, 0·80) among never smokers, former smokers and current smokers, respectively. No significant interaction was observed between glucosamine use and smoking status (Pfor interaction = 0·078). Incident COPD could be reduced by 14 % to 84 % through a combination of regular glucosamine use and smoking cessation.

Nicotine 3,5-dihydroxybenzoate dihydrate is a nicotine salt and can be used as compositions in tobacco products. X-ray powder diffraction data, unit-cell parameters, and space group for nicotine 3,5-dihydroxybenzoate, C10H15N2⋅C7H5O4⋅2H2O, are reported [a = 8.424(1) Å, b = 13.179(8) Å, c = 8.591(1) Å, α = 90°, β = 102.073(8)°, γ = 90°, unit-cell volume V = 932.765(3) Å3, Z = 2, ρcal = 1.256 g⋅cm−3, and space group P21] at room temperature. All measured lines were indexed and are consistent with the P21 space group.

A recently developed pneumonia caused by SARS-CoV-2 has quickly spread across the world. Unfortunately, a simplified risk score that could easily be used in primary care or general practice settings has not been developed. The objective of this study is to identify a simplified risk score that could easily be used to quickly triage severe COVID-19 patients. All severe and critical adult patients with laboratory-confirmed COVID-19 on the West campus of Union Hospital, Wuhan, China, from 28 January 2020 to 29 February 2020 were included in this study. Clinical data and laboratory results were obtained. CURB-65 pneumonia score was calculated. Univariate logistic regressions were applied to explore risk factors associated with in-hospital death. We used the receiver operating characteristic curve and multivariate COX-PH model to analyse risk factors for in-hospital death. A total of 74 patients (31 died, 43 survived) were finally included in the study. We observed that compared with survivors, non-survivors were older and illustrated higher respiratory rate, neutrophil-to-lymphocyte ratio, D-dimer and lactate dehydrogenase (LDH), but lower SpO2 as well as impaired liver function, especially synthesis function. CURB-65 showed good performance for predicting in-hospital death (area under curve 0.81, 95% confidence interval (CI) 0.71–0.91). CURB-65 ⩾ 2 may serve as a cut-off value for prediction of in-hospital death in severe patients with COVID-19 (sensitivity 68%, specificity 81%, F1 score 0.7). CURB-65 (hazard ratio (HR) 1.61; 95% CI 1.05–2.46), LDH (HR 1.003; 95% CI 1.001–1.004) and albumin (HR 0.9; 95% CI 0.81–1) were risk factors for in-hospital death in severe patients with COVID-19. Our study indicates CURB-65 may serve as a useful prognostic marker in COVID-19 patients, which could be used to quickly triage severe patients in primary care or general practice settings.

The effect of holly polyphenols (HP) on intestinal inflammation and microbiota composition was evaluated in a piglet model of lipopolysaccharide (LPS)-induced intestinal injury. A total of twenty-four piglets were used in a 2 × 2 factorial design including diet type and LPS challenge. After 16 d of feeding with a basal diet supplemented with or without 250 mg/kg HP, pigs were challenged with LPS (100 μg/kg body weight) or an equal volume of saline for 4 h, followed by analysis of disaccharidase activities, gene expression levels of several representative tight junction proteins and inflammatory mediators, the SCFA concentrations and microbiota composition in intestinal contents as well as proinflammatory cytokine levels in plasma. Our results indicated that HP enhanced intestinal disaccharidase activities and reduced plasma proinflammatory cytokines including TNF-α and IL-6 in LPS-challenged piglets. Moreover, HP up-regulated mRNA expression of intestinal tight junction proteins such as claudin-1 and occludin. In addition, bacterial 16S rRNA gene sequencing showed that HP altered hindgut microbiota composition by enriching Prevotella and enhancing SCFA production following LPS challenge. These results collectively suggest that HP is capable of alleviating LPS-triggered intestinal injury by improving intestinal disaccharidase activities, barrier function and SCFA production, while reducing intestinal inflammation.

Although the streaked optical pyrometer (SOP) system has been widely adopted in shock temperature measurements, its reliability has always been of concern. Here, two calibrated Planckian radiators with different color temperatures were used to calibrate and verify the SOP system by comparing the two calibration standards using both multi-channel and single-channel methods. A high-color-temperature standard lamp and a multi-channel filter were specifically designed for the measurement system. To verify the reliability of the SOP system, the relative deviation between the measured data and the standard value of less than 5% was calibrated out, which demonstrates the reliability of the SOP system. Furthermore, a method to analyze the uncertainty and sensitivity of the SOP system is proposed. A series of laser-induced shock experiments were conducted at the ‘Shenguang-II’ laser facility to verify the reliability of the SOP system for temperature measurements at tens of thousands of kelvin. The measured temperature of the quartz in our experiments agreed fairly well with previous works, which serves as evidence for the reliability of the SOP system.

Novel NiMoO4-integrated electrode materials were successfully prepared by solvothermal method using Na2MoO4·2H2O and NiSO4·6H2O as main raw materials, water, and ethanol as solvents. The morphology, phase, and structure of the as-prepared materials were characterized by SEM, XRD, Raman, and FT-IR. The electrochemical properties of the materials in supercapacitors were investigated by cyclic voltammetry, constant current charge–discharge, and electrochemical impedance spectroscopy techniques. The effects of volume ratio of water to ethanol (W/E) in solvent on the properties of the product were studied. The results show that the pure phase monoclinic crystal NiMoO4 product can be obtained when the W/E is 2:1. The diameter and length are 0.1–0.3 µm and approximately 3 µm, respectively. As an active material for supercapacitor, the NiMoO4 nanorods material delivered a discharge specific capacitance of 672, 498, and 396 F/g at a current density of 4, 7, and 10 A/g, respectively. The discharge specific capacitance slightly decreased from 815 to 588 F/g with a retention of 72% after 1000 cycles at a current density of 1 A/g. With these superior capacitance properties, the novel NiMoO4 integrated electrode materials could be considered as promising material for supercapacitors.

Conventional pNIPAAm microgel synthesis utilizes surfactants to suspend pre-gel droplets in the immiscible continuous phase due to the slow polymerization required for synthesizing pNIPAAm in aqueous solvent. To improve the fabrication process and to eliminate the effects of surfactant on microgel quality, a surfactant-free and water-free method was developed. Rapid polymerization of high-quality microgels was achieved in a single-channel microfluidic device to help maintain the integrity of gel particles without the addition of surfactants. The droplet generation mechanism and the effect of flow rate of the two in-going immiscible fluid on the geometry of the produced microgels were studied. The produced microgels have low polydispersity with a dispersity index of 6.4%. The pNIPAAm hydrogels fabricated in the DMSO solvent has smaller pore size and more uniform microstructure compared to that synthesized in water. The fabricated pNIPAAm microgels show a sharp volume phase transition at ∼32 °C and high deswelling/swelling rate.

The evolution of fatigue performance and surface mechanical properties of AISI 304 stainless steel induced by the electropulsing-assisted ultrasonic surface rolling process (EP-USRP) was systematically investigated by integrating instrumented indentation, scanning electron microscopy with electron backscatter diffraction, and transmission electron microscopy. The results indicate that higher hardness, greater strength, finer ultra-refined grains, and higher residual compressive stress are formed within the strengthened layer compared with the original ultrasonic surface rolling process (USRP). EP-USRP with the optimized experimental parameters can produce a higher average rotating bending fatigue strength for AISI 304 stainless steel than USRP. Anomalously and noteworthily, all fatigue specimens treated by EP-USRP showed an incomplete fracture, revealing a higher reservation of safety in practical engineering applications. The further modified structure strengthening and stress strengthening induced by EP-USRP are likely the primary intrinsic reasons for the observed phenomena. Furthermore, the influence mechanism of EP-USRP was discussed scrupulously.

The Chinese Solar and Geophysical Data (CSGD) was first issued at the Beijing Astronomical Observatory, Chinese Academy of Sciences (now the headquarter of the National Astronomical Observatories, Chinese Academy of Sciences) in 1971, when China’s satellite-industry was booming. CSGD covers the observational data (observations of the sunspots, solar flares, solar radio bursts, ionospheric storm and geomagnetic storm) from a couple of domestic observatories and the forecast data. The compiler of CSGD still keeps the data exchange with other institutes worldwide. The type of the dataset includes texts, tables, figures and so on. Up to now, we have electronized all the historic archives, making them easily accessible to people who are interested in them.

The first-principles plane-wave pseudopotential method is used to study the electronic and chemical structures of pyrite (FeS2) and arsenopyrite (FeAsS). The results indicate that an antibonding interaction occurs between Fe and As atoms in arsenopyrite. This interaction results in the Fe atom being repelled towards the S atom to stabilize antibonding orbitals, causing a larger S–Fe–S angle in arsenopyrite than in pyrite and a distortion in the arsenopyrite structure. In arsenopyrite, Fe–Fe distances are alternately long and short. The low spin density of the Fe d electrons supports this configuration in arsenopyrite. However, electron density calculations indicate that there is negligible electron density present between Fe atoms. This result indicates that cation-anion interactions are dominant in arsenopyrite. The pyrite Fe 3d orbital is split below the Fermi level, whereas the arsenopyrite Fe 3d orbital is not split, which can be attributed to the stronger interatomic bonding effects between Fe and S atoms in pyrite compared to arsenopyrite. It is found that the d-p orbital interactions between Fe and S atoms lead to bonding-antibonding splitting in both pyrite and arsenopyrite. However, the bonding effects between pyrite Fe and S atoms are stronger than in arsenopyrite. In arsenopyrite, the bonding interaction between the As 4p and Fe 3d orbitals is very weak, while the antibonding effect is very strong. The p-p orbital interaction is the dominant effect in As–S bonding. Frontier orbital calculations indicate that the Fermi levels of pyrite and arsenopyrite are notably close to each other, resulting in similar electrochemical activities. Orbital coefficient results show that the pyrite Fe 3d and S 3p orbitals are the active orbitals in the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), respectively. In the case of arsenopyrite, Fe 3d orbitals are very active in both the HOMO and LUMO. Moreover, the activity of the As 4p in the HOMO is greater than S 3p, whereas the opposite situation occurs in the LUMO. Based on these results, As atoms could be one of the active sites for the oxidation of arsenopyrite. In addition, separation of arsenopyrite and pyrite could be achieved by utilizing the difference in chemical reactivities of iron in the two minerals.

In this paper, numerical simulations of solid particle erosion phenomena on H-type finned circular/elliptic tube surface, which is of great significance to the antiwear design of heat exchanger, are presented. The Eulerian-Lagrangian approach is applied to simulate the dilute gas-solid flow through H-type finned circular/elliptic tubes. A semi-empirical model is adopted to predict the erosion rate. The dynamics behavior of the entrained solid particles in the flow is presented. The geometry of eroded tube surface is changed with the predicted erosion which is taken into account by a UDF and the flow field is re-solved for the eroded tube surface at every time step. The influences of ten parameters (the tube bundle arrangement, particle size, particle concentration, fluid Reynolds number, fin thickness, fin pitch, fin length, fin width, slit width and the transverse tube pitch) on the maximum erosion depth of the H-type circular/elliptic finned tube surface are investigated. Using H-type finned elliptic tube surface can effectively reduce the erosion rate of tube surface comparedwith that using H-type finned circular tube surface. The erosion in in-line arrangement is less severe than that in staggered arrangement. With the increase of particle size, particle concentration and the fluid Reynolds number, the erosion rate of the tube surface rises. The numerically predicted effect of Reynolds number is in good agreement with previous test data. Among the six geometry parameters, the most influential parameter is the transverse tube pitch.

The Myanmar snub-nosed monkey Rhinopithecus strykeri was discovered in 2010 on the western slopes of the Gaoligong Mountains in the Irrawaddy River basin in Myanmar and subsequently in the same river basin in China, in 2011. Based on 2 years of surveying the remote and little disturbed forest of the Gaoligong Mountains National Nature Reserve in China, with outline transect sampling and infrared camera monitoring, a breeding group comprising > 70 individuals was found on the eastern slopes of the Gaoligong Mountains in the Salween River Basin. Given the Critically Endangered status of this primate (a total of < 950 individuals are estimated to remain in the wild), efforts to protect the relatively undisturbed habitat of this newly discovered population and to prevent hunting are essential for the long-term survival of this species.

In this paper, an ultra-wideband (UWB) filter with a notch band using T-shaped step impedance resonator loaded with cross-shaped open stubs has been presented. The notch band is formed by utilizing intrinsic zero. The characteristics of the new quad-mode resonator have been analyzed using odd-even mode analysis method. It can be shown that it is the intrinsic zero that generates the notch band. In addition, wide tunable notch band form 5–9.3 GHz can be achieved. A UWB filter with a notch band centered at 6.25 GHz using the proposed quad-mode resonator has been designed, fabricated, and tested. Experiment results show that the attenuation in notch frequency is >22 dB while the return loss of the simulation and measurement results are 22 dB/20 dB and 14.5 dB/11.2 dB in the lower and upper passband, respectively, which illustrate that the simulation and measurement results are in agreement.

In tropical plant communities with diverse species, many congeners are found to coexist. Do environment or biotic interactions structure the coexistence of congeners in tropical forest communities? In this paper, we aimed to disentangle the effect of environment (first-order effects) and species interactions (second-order effects) on the spatial distributions of tree species. We used a classification scheme and torus-translation to test the first-order interaction of 48 species from 17 genera in a fully mapped 20-ha dipterocarp tropical seasonal rain-forest plot in Xishuangbanna, south-west China. Then we used heterogeneous Poisson null models to reveal significant uni- and bivariate second-order interactions. The results demonstrated that (1) 34 of the 48 studied species showed a significant relation with at least one topographic variable. This confirmed that topographical heterogeneity is important for distribution of these congeners. Spatial segregation (36.6%) and partial overlap (34.8%) were the most common bivariate association types in Xishuangbanna plot, which indicated first-order effects (environment) were strong. (2) For small-scale associations, 51% saplings (1 to ≤ 5 cm) (68.8% for large trees with dbh > 5 cm) of the species showed non-significant associations. For large-scale associations, 61.6% saplings (81.2% for large trees) of the species showed non-significant associations. Lack of significant species interactions provides evidence for the unified neutral theory. In conclusion, both environment and biotic interactions structure congeneric species' coexistence in tropical seasonal rain forest in this region.