The sap of Acer mono has been called ‘bone-benefit-water’ in Korea because of its mineral and sugar content. In particular, the calcium concentration of the sap of A. mono is 37·5 times higher than commercial spring water. In the current study, we examined whether A. mono sap could improve or prevent osteoporosis-like symptoms in a mouse model. Male mice (3 weeks old) were fed a low-calcium diet supplemented with 25, 50 or 100 % A. mono sap, commercial spring water or a high calcium-containing solution as a beverage for 7 weeks. There were no differences in weekly weight gain and food intake among all the groups. Mice that were given a low-calcium diet supplemented with commercial spring water developed osteoporosis-like symptoms. To assess the effect of sap on osteoporosis-like symptoms, we examined serum calcium concentration, and femur density and length, and carried out a histological examination. Serum calcium levels were significantly lower in mice that received a low-calcium diet supplemented with commercial spring water (the negative control group), and in the 25 % sap group compared to mice fed a normal diet, but were normal in the 50 and 100 % sap and high-calcium solution groups. Femur density and length were significantly reduced in the negative control and 25 % sap groups. These results indicate that a 50 % sap solution can mitigate osteoporosis-like symptoms induced by a low-calcium diet. We also examined the regulation of expression of calcium-processing genes in the duodenum and kidney. Duodenal TRPV6 and renal calbindin-D9k were up-regulated dose-dependently by sap, and the levels of these factors were higher than those attained in the spring water-treated control. The results demonstrate that the sap of A. mono ameliorates the low bone density induced by a low-calcium diet, most likely by increasing calcium ion absorption.

We introduce a simple preparation method for ultrathin carbon support films that is especially useful for high-resolution electron microscopy (HREM) of nanoparticles. Oxidized iron nanoparticles were used as a test sample in a demonstration of this method. The film qualities are discussed on the basis of electron-energy-loss spectroscopy (EELS) and image analysis techniques such as thickness maps and histograms. We carried out a comparison between the homemade and commercial film qualities. The relative thickness of the homemade support films was 0.6 times less than that of the commercial films, which was calculated from the EELS analysis, whereas the thicknesses of both carbon support films varied within about 3%. The percentage of the observable area was about 67 ± 7.6% of the support film. This was about twice as large as the commercial film (32 ± 9.3%). The HREM image of the sample prepared with our support film improved 9% in brightness and 15% in contrast compared with images obtained with the commercial support.

Oxidative modification of LDL is causally involved in the development of atherosclerosis and occurs in vivo in the blood as well as within the vascular wall. The present study attempted to explore whether polyphenolic flavonoids influence monocyte-endothelium interaction and lectin-like oxidised LDL receptor 1 (LOX-1) expression involved in the early development of atherosclerosis. The flavones luteolin and apigenin inhibited THP-1 cell adhesion onto oxidised LDL-activated human umbilical vein endothelial cells (HUVEC), while the flavanols of ( − )epigallocatechin gallate and (+)catechin, the flavonols of quercetin and rutin, and the flavanones of naringin, naringenin, hesperidin and hesperetin did not have such effects. Consistently, Western blot analysis revealed that the flavones at 25 μm dramatically and significantly abolished HUVEC expression of vascular cell adhesion molecule-1 and E-selectin evidently enhanced by oxidised LDL; these inhibitory effects were exerted by drastically down regulating mRNA levels of these cell adhesion molecules. In addition, quercetin and luteolin significantly attenuated expression of LOX-1 protein up regulated in oxidised LDL-activated HUVEC with a fall in transcriptional mRNA levels of LOX-1. In addition, quercetin and luteolin clearly blunted oxidised LDL uptake by HUVEC treated with oxidised LDL. The results demonstrate that the flavones luteolin and apigenin as well as quercetin were effective in the different initial steps of atherosclerosis process by inhibiting oxidised LDL-induced endothelial monocyte adhesion and/or oxidised LDL uptake. Therefore, certain flavonoids qualify as anti-atherogenic agents in LDL systems, which may have implications for strategies attenuating endothelial dysfunction-related atherosclerosis.

The reaction sequence and microstructure evolution of a crystalline MgB2 layer were examined during ex situ annealing of evaporated amorphous boron (a-B) with Mg vapor. Mg was found to migrate rapidly into the a-B layer in the initial stage of reaction with a uniform concentration of about 12 at.%. A thin layer of crystalline MgO was observed at the interface between a-B and the Al2O3 substrate. It was identified that an MgB2 layer started to form at the surface by the nucleation and growth process in polycrystalline form. It appears that there exists two distinct growth fronts in the MgB2 layer: one lying at the surface and the other lying at the interface between the MgB2 layer and the a-B. The microstructural evolution of this layer showed significant differences depending on the location of these two growth fronts.

In this work, electrospinning was carried out using 12 wt.% poly(ethylene oxide) (PEO) solution under fixed tip-to-collect distance (10 cm) and voltage (15 kV) in order to fabricate nanofibers-reinforced composites. The content of PEO nanofibers was varied from 0 to 10 wt.% in the epoxy (EP) matrix resins. And the PEO powders-impregnated composites were also prepared to compare with physicochemecal properties of nanofibers-reinforced composites. Thermal and mechanical interfacial properties of EP/PEO nanocomposites were characterized by thermogravimetric analysis (TGA) and fracture toughness test, respectively. As a result, the PEO-based nanofibers-reinforced composites showed an improvement of thermal stability parameters (initial decomposed temperature (IDT) and integral procedural decomposition temperature (IPDT)) and fracture toughness factors (KIC and GIC), compared to the composites impregnated with PEO powders. And the thermal and mechanical interfacial properties of the composites were increased with increasing the PEO content, which could be probably attributed to the higher specific surface area and larger aspect ratio of PEO nanofibers, resulting in improving the demand performance of the nanocomposites.

In this study, we have investigated microencapsulation of magenta, yellow, and cyan color polymer balls with white pigment for multi-color electrophoretic display implementation. The charged color pigments have been prepared by physical coating of magenta, yellow, and cyan with functionalized polymers, then surface charging with charge control agent. These color balls with white pigment were microencapsulated in suspending fluid through in-situ polymerization.

We have investigated the growth mechanism and thin film morphology of pentacene thin films by the process of low-pressure gas assisted organic vapor deposition (LP-GAOVD). As the source temperature, flow rate of the carrier gas, substrate temperature and chamber pressure were varied, the growth rate, morphology and grain size of the films were differently obtained. The electrical properties of pentacene thin films for applications in organic thin film transistor and electrophoretic displays were discussed

CaTiO3:Pr3+ as an oxide phosphor is expected to be applied for a field emission display(FED) due to its relatively high conductivity. For the practical use, however, the CL intensity of CaTiO3:Pr3+ has to be enhanced. We introduced Ga3+ as a co-activator into the phosphor and investigated the CL characteristics with various Ga3+ concentrations. The CL intensity of CaTiO3:Pr3+ was remarkably increased when Ti4+ atom was replaced by the Ga3+. When the Ga3+ concentration is 5 times of Pr3+ molar concentration, the emission intensity of the CaTiO3:Pr3+ phosphor with Ga3+ is about 5 times higher than Ga3+-free samples. So, it was concluded that the addition of Ga3+ is essential to enhance CL property at low voltage. We proposed the following mechanism that excitation into the host lattice leads to the formation of electrons in the conduction band and holes in the valence band. The electrons in the conduction band recombine with the holes trapped at Ga3+ and this energy is effectively transferred to Pr3+ ion, which gives its own characteristic red emission.

We have studied infrared photoluminescence (PL) and x-ray diffraction (XRD) of 400 nm and 1500 nm thick InAs epilayers on GaAs, and 4 nm thick InAs on graded InGaAs layer with total thickness of 300 nm grown by molecular beam epitaxy. The PL peak positions of 400 nm, 1500 nm and 4 nm InAs epilayer measured at 10 K are blue-shifted from that of InAs bulk by 6.5, 4.5, and 6 meV, respectively, which can be largely explained by the residual strain in the epilayer. The residual strain caused by the lattice mismatch between InAs and GaAs or graded InGaAs/GaAs was observed from XRD measurements. While the PL peak position of 400 nm thick InAs layer is linearly shifted toward higher energy with increase in excitation intensity ranging from 10 to 140 mW, those of 4 nm InAs epilayer on InGaAs and 1500 nm InAs layer on GaAs is gradually blue-shifted and then, saturated above a power of 75 mW. These results suggest that adopting a graded InGaAs layer between InAs and GaAs can efficiently reduce the strain due to lattice mismatch in the structure of InAs/GaAs.

The Far-ultraviolet IMaging Spectrograph (FIMS) is a small spectrograph optimized for the observations of diffuse hot interstellar medium in far-ultraviolet wavebands (900–1150Å and 1335–1750Å). The instrument is expected to be sensitive to emission line fluxes an order of magnitude fainter than any previous missions. FIMS is currently under development and is scheduled for launch in 2002.

The degradation behavior of integrated Pt/SrBi2Ta2O9/Pt capacitors caused by hydrogen impregnation during the spin-on glass (SOG)-based intermetal dielectric (IMD) process was investigated. SOG was tested as an IMD since it offers better planarity for multilevel metallization processes compared to other SiO2 deposition methods. It was found that the SOG itself does not degrade the ferroelectric performance. Deposition of an under-layer of SiOxNy by plasma-enhanced chemical vapor deposition (PECVD) using SiH4 + N2O + N2 source gases and a SiO2?x capping layer by another PECVD process using SiH4 + N2O source gases produced hydrogen as a reaction by-product. The hydrogen diffused into the SBT layer and degraded the ferroelectric performance during subsequent annealing cycles. A very thin (10 nm) Al2O3 layer grown by atomic layer deposition before the IMD process successfully blocked the impregnation of the hydrogen. Therefore, excellent ferroelectric performance of the SBT capacitors were maintained after the multilevel metallization process as well as passivation. The adoption of SOG in the IMD process greatly improved the surface flatness of the wafer resulting in a higher capacitor yield with very good uniformity in ferroelectric properties over the 8-in.-diameter wafer.