Laser-plasma instabilities (LPI) play a detrimental role in energy coupling to the target in inertial confinement fusion (ICF). The recent development of applied strong magnetic fields for use in ICF and laboratory astrophysics experiments has opened opportunities to investigate the role of external magnetic fields on LPIs. Recent numerical studies have shown that stimulated Raman scattering (SRS) can be mitigated by external magnetic fields in the kinetic regime of the instability and warrant systematic experimental studies to validate modelling. To this end, we design experiments at the OMEGA-EP laser facility to investigate the effect of an external perpendicular $B$-field of 5–30 T on the backscattered light spectrum from a gas-jet target. We present measurements from a proof-of-principle experiment, where the backward-SRS (BSRS) is in the kinetic regime, for which the magnetization is expected to produce the greatest effects on instability growth. New simulations motivated by this experiment are used to inform the proposal of an upgraded experimental design. Our simulation predictions show that the new design is suited to experimentally demonstrating BSRS mitigation by an external magnetic field, despite the magnetization effects on the hydrodynamics, as well as the inherent temporal and spatial variations in plasma conditions.

Antarctic and Southern Ocean science is vital to understanding natural variability, the processes that govern global change and the role of humans in the Earth and climate system. The potential for new knowledge to be gained from future Antarctic science is substantial. Therefore, the international Antarctic community came together to ‘scan the horizon’ to identify the highest priority scientific questions that researchers should aspire to answer in the next two decades and beyond. Wide consultation was a fundamental principle for the development of a collective, international view of the most important future directions in Antarctic science. From the many possibilities, the horizon scan identified 80 key scientific questions through structured debate, discussion, revision and voting. Questions were clustered into seven topics: i) Antarctic atmosphere and global connections, ii) Southern Ocean and sea ice in a warming world, iii) ice sheet and sea level, iv) the dynamic Earth, v) life on the precipice, vi) near-Earth space and beyond, and vii) human presence in Antarctica. Answering the questions identified by the horizon scan will require innovative experimental designs, novel applications of technology, invention of next-generation field and laboratory approaches, and expanded observing systems and networks. Unbiased, non-contaminating procedures will be required to retrieve the requisite air, biota, sediment, rock, ice and water samples. Sustained year-round access to Antarctica and the Southern Ocean will be essential to increase winter-time measurements. Improved models are needed that represent Antarctica and the Southern Ocean in the Earth System, and provide predictions at spatial and temporal resolutions useful for decision making. A co-ordinated portfolio of cross-disciplinary science, based on new models of international collaboration, will be essential as no scientist, programme or nation can realize these aspirations alone.

Bulk metallic glasses foams are under consideration as highly functional material, such as energy absorbers or ultra-lightweight parts, due to their porous structure combined with desirable strengths at relatively low densities. Also, the characteristics of high surface area of foams synthesized from metallic glasses make them viable candidates as emerging materials such as high-sensitivity sensors, catalysts or hydrogen storage media. In current study, bulk metallic glass foams were fabricated by extruding powder mixtures comprised of metallic glasses blended with various kinds of fugitive phases followed by dissolution of the fugitive phases in an aqueous chemical solution, for example HNO3, to yield the final porous structure. As a result of dissolution process, porous metallic glass having uniformly distributed micro-scale porosity was fabricated using a sequential synthesis technique beginning with composite particles comprised of composites of MG and a fugitive phase followed by consolidation of the composite powders via warm extrusion.

An overview on current trends in stimulated Brillouin scattering and optical phase conjugation is given. This report is based on the results of the “Second International Workshop on stimulated Brillouin scattering and phase conjugation” held in Potsdam/Germany in September 2007. The properties of stimulated Brillouin scattering are presented for the compensation of phase distortions in combination with novel laser technology like ceramics materials but also for e.g., phase stabilization, beam combination, and slow light. Photorefractive nonlinear mirrors and resonant refractive index gratings are addressed as phase conjugating mirrors in addition.

The ultrastructure of nanoscale apatite biomimetically formed on an organic template from a supersaturated mineralizing solution was studied to examine the morphological and crystalline arrangement of mineral apatites. Needle-shaped apatite crystal plates with a size distribution of ∼100 to ∼1000 nm and the long axis parallel to the c axis ([002]) were randomly distributed in the mineral films. Between these randomly distributed needle-shaped apatite crystals, amorphous phases and apatite crystals (∼20–40 nm) with the normal of the grains quasi-perpendicular to the c axis were observed. These observations suggest that the apatite film is an interwoven structure of amorphous phases and apatite crystals with various orientations. The mechanisms underlying the shape of the crystalline apatite plate and aggregated apatite nodules are discussed from an energy-barrier point of view. The plate or needle-shaped apatite is favored in single-crystalline form, whereas the granular nodules are favored in the polycrystalline apatite aggregate. The similarity in shape in both single-crystalline needle-shaped apatite and polycrystalline granular apatite over a wide range of sizes is explained by the principle of similitude, in which the growth and shape are determined by the forces acting upon the surface area and the volume.

The effect of replacement of Ti with Y or Nb in Ti-rich Ti–Zr–Be–Cu–Ni bulk metallic glasses (BMGs) has been investigated. The minor addition (MA) of Y (Y–Ti: +58 kJ/mol) induced phase separation into Y-rich crystalline particles and Ti-rich amorphous matrix, while the MA of Nb (Nb–Ti: +10 kJ/mol) led to nanocrystallization in Ti-rich BMGs with icosahedral nuclei. This result indicates that MA of elements having positive enthalpy of mixing can induce a different degree of instability in the single amorphous matrix depending on the amount of repulsive interaction energy. In particular, MA of Nb (up to 4 at.%) significantly increased the compressive fracture strain (ϵf) up to ∼9.35 ± 0.2%, which indicates that the plasticity of BMGs can be enhanced by the size-modulated icosahedral phase embedded in the amorphous matrix.

In this study we have investigated the efficiency of in vitro maturation (IVM) as a basic way to study the development of canine oocytes after in vitro fertilization (IVF). We decided, therefore, to perform two-part experiments. Firstly, experiment I compared the effects of TCM199 without fetal bovine serum (FBS) with TCM199 supplemented with 5% FBS on the in vitro nuclear maturation rate of canine oocytes. For the efficiency of meiotic development to the metaphase II (MII) stage, we found that 4.7% (4/64) of all oocytes grown in TCM199 without FBS developed to the MII stage compared with only 1.7% (1/59) of those grown in TCM199 with 5% FBS for 48 h. Therefore, FBS did not increase in vitro nuclear maturation. In experiment II, the cleavage rate of canine oocytes used for IVF was investigated following heparin treatment. Canine oocytes were fertilized in four groups: Fert–TALP medium without heparin (Fert I) or Fert–TALP medium supplemented with 10, 20 or 30 µg/ml heparin (Fert II, Fert III, Fert IV, respectively). Oocytes that were grown for 24 h in Fert I following fertilization showed the highest rate of all of the groups, 6.5% (5/77) and developed to the early morula stage. Markedly, the oocytes cultured in Fert I for 24 h following insemination had a higher rate of embryonic development than other groups. We can assert that, unlike findings in other mammals, heparin treatment in canine IVF does not increase the efficiency of the fertilization rate and is therefore not an important factor.

A new concept of laser fusion driver is proposed, which uses a beam combination technique with stimulated Brillouin scattering phase conjugate mirror (SBS-PCM). It is constructed systematically with a cross-type amplifier as a basic unit. In the first part of this paper, we introduce the cross-type laser amplifier using SBS-PCM, with several advantages by experimental results. These advantages are the ideal properties for practical laser fusion driver, such as the perfect isolation of leak beam, the compensation of thermally induced birefringence through the amplifiers, the easy maintenance and alignment insensitiveness, and the freely-scale-up energy. Next, some successful results for the phase control of SBS-PCM are presented, which is one of the main problems in the current beam combination laser using SBS-PCM. Particularly, a new technique for controlling the phase of SBS-PCM, “self-density modulation,” is introduced, which is the simplest ever among those reported. With the advantages of the cross-type amplifier using SBS-PCM and the novel method for controlling the phase of SBS-PCM, the proposed beam combination laser system is presented as the most promising one, which can contribute to the realization of high energy laser that can operate with high repetition rate over 10 Hz, even in the case of huge output energy over MJ.

A highly deformable Zr–Al–Cu–Ni–Sn alloy system without any catastrophic failure has been developed and the underling mechanism for exceptional plasticity has been investigated in terms of structural characteristics and atomic movement kinetics. The as-cast Zr61.7Al8Ni13Cu17Sn0.3 bulk metallic glass has many local nanoscale ordering features. They can play a critical role in nucleating abundant shear bands that sufficiently accommodate global plasticity. During deformation at room temperature, the ordered regions do not grow, providing a structural stability, possibly from the sluggish atomic movement kinetics. Thermal activation energy for crystallization of the Zr61.7Al8Ni13Cu17Sn0.3 alloy is estimated as 3.96 eV, which is about 2.8 times higher than that of the Z41.2Ti13.8Cu12.5Ni10Be22.5 alloy [Vitreloy 1 (Vit1)] and the dynamic mass flow rate is around 10 times slower than that of Vit1. A thermomechanical estimation of compressive strain rates under constant stress shows a sluggish atomic movement upon the addition of Sn.

The effect of Ag substitution for Cu on the glass forming ability (GFA) and mechanical properties of Mg65Cu25−xAgxGd10 (x = 0, 5, 10, 15, 20, 25) alloyswere investigated using x-ray diffractometry and differential scanning calorimetry.The partial substitution of Cu by Ag in Mg65Cu25Gd10 promoted the GFA. Mg65Cu20Ag5Gd10 bulk metallic glass (BMG) with a diameter of 11 mm could be fabricated by conventional copper-mold casting method in air atmosphere. The Mg65Cu20Ag5Gd10 BMG exhibits yielding and plastic deformation during compressive loading. The compressive fracture strength, total strain to failure, and plastic strain to failure of the Mg65Cu20Ag5Gd10 BMG were 909 MPa, 2.21% and 0.5%, respectively.

In this study, the effect of addition of Nb on glass formation in Ni–Ti–Zr–Si–Sn alloys has been studied. The composition range for bulk glass formation with Dmax > 2 mm (Dmax, maximum diameter for glass formation by injection cast method) becomes wider when compared with the non-Nb–containing alloy. The ΔTx (= Tx – Tg; Tx, crystallization onset temperature; Tg, glass transition temperature), Trg (= Tg/Tl; Tl, liquidus temperature) and γ [= Tx/(Tl + Tg)] values for the alloys Dmax > 2 mm are in the range of 40–59, 0.638–0.651, and 0.410–0.419, respectively. The compositions of the alloys (Dmax > 2 mm) are closer to pseudo-eutectic composition than that of the alloy without Nb, showing an improved glass forming ability. The critical cooling rate for glass formation (Dmax = 5 mm) is estimated to be order of approximately 40 K/s.

The deformation behavior of Ti-based bulk metallic glass (BMG) and metallic glass matrix composite (MGMC), both having a multistep crystallization behavior upon heating, has been investigated in the supercooled liquid region. The BMG deforms homogeneously and exhibits moderate elongation to failure due to its multistep crystallization behavior, but shows a significant variation of the flow stress during deformation. For the MGMC containing an in situ β-phase, a stress-overshoot characteristic, observed in the BMG, is not presented, but elongation to failure is rather limited because the crystalline β-phase prevents the viscous flow of the amorphous phase. The different presence of the crystalline phases in the metallic glasses can differently affect the flow behavior of metallic glass in the supercooled liquid region.

Field experiments have run for over 14 years to evaluate the behaviour of the same high-sodium content radioactive waste borosilicate glass buried in a loamy soil (glass K-26) and in an open testing area (glass Bs-10). Processing of field data for glass Bs-10 tested in an open area has resulted in a dissolution rate r = 0.42 µm/y and caesium diffusion coefficient D ≍ 1.8 10−20 m2/s at testing temperatures up to 19 oC. Both ion-exchange and hydrolysis control the corrosion of this glass. Processing of field data for K-26 glass revealed an insignificant role of glass dissolution. The caesium diffusion coefficient was estimated as D ≍ (3.4-5.1) 10−21 m2/s. Due to the relatively low storage temperatures (4.5 oC) used the leaching behaviour of glass K-26 is believed to be controlled by ion exchange processes. This mechanism is likely to remain dominant until the decay of 137Cs in the glass is below exemption levels.

A series of ZnO films with various thicknesses were prepared on (0001) sapphire substrate by pulsed laser deposition (PLD). Scanning electron microscopy (SEM) and x-ray diffraction (XRD) analysis were utilized to investigate the effects of misfit strain on the surface morphology and the crystallinity. The electrical and optical properties of the films were also investigated as a function of the film thickness. It was found that the crystalline quality, electrical and optical properties of the films depended on the film thickness and were improved with increasing the film thickness. This is attributed to the fact that the films thinner than 400 nm are under the severe misfit strain, which decreases as the film thickness increases further.

Quasicrystalline coatings with various aluminum based systems were deposited onto 304 stainless steel substrates using two thermal spraying techniques; plasma spraying and high velocity oxy-fuel spraying. The friction and wear performances of the coatings were evaluated using two different testing devices, varying testing conditions and counterpart materials. Values of the friction coefficient were found to be strongly dependent on the testing devices and the counterpart materials, with values ranging from 0.15 to 0.4. In testing conditions corresponding to high sliding velocity, this study showed that the contact problem was posed over a third body system due to the formation of an intermediate layer. Values of the coefficient of friction were found to be approximately the same for all coating layers regardless of the thermal spraying techniques used, however, larger differences were obtained in the wear performance. The tribological properties were also evaluated at high temperature. It is noted that quasicrystal coating layers exhibit better friction and wear performances at 450oC than at room temperature. In comparison to potential coating candidate such as Cr2O3 for piston rings in automotive engines, tribological property of quasicrystalline coating layers seems to be promising one, however, wear performance need to be improved.

Spark plasma sintering method was applied to Al-Cu-Fe and Al-Si-Cu-Fe gas-atomized powders to prepare almost pore-free cylindrical specimens with icosahedral and 1/1 cubic approximant phases, respectively. This investigation has revealed that a high density could be obtained despite the short period and low temperature imposed during spark plasma sintering. In comparison to hot press technique, these conditions are favorable since they limit the formation of secondary phases and avoid exaggerated grain growth. The Vickers microhardness and fracture toughness of these two alloy systems were found to be larger than those obtained from cast and hot pressed samples, which could be attributed to a strong bonding between powder particles and the small-grained microstructure of the bulk SPS quasicrystalline specimens.

The quasicrystalline phase forming ability, solidification structure, thermal stability, and phase relationships of a series of conventionally-cast Al62-xCu25.5Fe12.5Bex (x=0,1,3,5,7) alloys were investigated. Single icosahedral quasicrystalline phase was successfully obtained by partial replacement of Al with Be (7 at.%) in an Al62Cu25.5Fe12.5 alloy during crucible cooling. The I-phase in an Al55Cu25.5Fe12.5Be7 alloy has the same face-centered icosahedral structure as that in an Al62Cu25.5Fe12.5 alloy, with less phason strain. Hardness of the I-phase increases with x, i.e. from Hv 710 for x=1 to Hv 809 for x=7.