As a producer of certified reference materials (CRMs), NIST faces high demand for Standard Reference Materials (SRMs). The demand is exacerbated by widespread misuse of CRMs. When should one use CRMs? When should one not use CRMs? Must labs always use NIST SRMs? How can labs demonstrate analytical capabilities for their accreditation scopes? Why so many questions? Standards developers, laboratory accreditors, and laboratory staff must be able to understand these topics with respect to quality systems in compliance with ISO/IEC 17025. They must calibrate and validate test methods and document traceability to the International System of Units (SI). Many people working in laboratory accreditation and under the umbrella of a quality system do not fully understand what these things are, let alone the language of chemical metrology. On average, they have little training in analytical chemistry, elemental analysis, and reference material development. It is hoped this paper will impress upon the reader the need for understanding how CRMs can be best used in the laboratory. This paper provides a brief background on the above problems and then looks at some of the support and reference information provided by NIST to metals and mining industries labs, commercial CRM producers, and accrediting bodies. The concepts and guidance apply broadly to chemical metrology and fundamental analytical chemistry. The paper includes examples (some from X-ray fluorescence spectrometry) to illustrate concepts.

Silicon nanowires (SiNWs) were fabricated in a metal-assisted chemical etching method with two steps including dipping silicon wafers in AgNO3/HF solutions and then in H2O2/HF solutions. Grazing incidence X-ray diffraction measurements with a set of incidence angles were carried out on the resulting samples to detect characteristics of silver nanoparticles in the etched silicon. Compared with the uniform size of silver nanoparticles on the surface, the silver nanoparticles in etched silicon were found with size increasing and content decreasing corresponding to the depths. Based on the silver size increasing phenomenon, a detailed supplementary hypothesis about SiNWs formation was proposed about silver disintegration and redeposition in the later stage of silicon etching. For 2, 3, 4, and 8 mM AgNO3 solutions used to study their effect on the SiNWs, it was found that a higher quantity of Ag+ concentration such as 8 mM were not beneficial for producing good quality SiNWs.

The speciation of vanadium in the electrolyte of vanadium redox flow batteries (VRFBs) is important to determine the state of charge of the battery. To obtain a better understanding of the transport of the different vanadium species through the separator polymer electrolyte membranes, it is necessary to be able to determine concentration and species of the vanadium ions inside the nanoscopic water body of the membranes. The speciation of V in the electrolyte of VRFBs has been performed by others at the synchrotron by X-ray absorption near-edge structure analysis (XANES). However, the concentrations are quite high and not necessarily justify the use of a large-scale facility. Here, we show that vanadium species in the electrolyte and inside the ionomeric membranes can be determined by laboratory XANES. We were able to determine V species in the 1.6 M electrolyte with a measurement time of 2.3 h and V species having a concentration of 9.8 g kg−1 inside the membranes (178 µm thick) with a measurement time of 5 h. Our results show that laboratory XANES is an appropriate tool to study these kind of samples.

Validating phase quantification procedures of powder X-ray diffraction (XRD) data for an implementation in an ISO/IEC 17025 accredited environment has been challenging due to a general lack of suitable certified reference materials. The preparation of highly pure and crystalline reference materials and mixtures thereof may exceed the costs for a profitable and justifiable implementation. This study presents a method for the validation of XRD phase quantifications based on semi-synthetic datasets that reduces the effort for a full method validation drastically. Datasets of nearly pure reference substances are stripped of impurity signals and rescaled to 100% crystallinity, thus eliminating the need for the preparation of ultra-pure and -crystalline materials. The processed datasets are then combined numerically while preserving all sample- and instrument-characteristic features of the peak profile, thereby creating multi-phase diffraction patterns of precisely known composition. The number of compositions and repetitions is only limited by computational power and storage capacity. These datasets can be used as input files for the phase quantification procedure, in which statistical validation parameters such as precision, accuracy, linearity, and limits of detection and quantification can be determined from a statistically sound number of datasets and compositions.

The National Institute of Standards and Technology (NIST) certifies a suite of Standard Reference Materials (SRMs) to evaluate specific aspects of instrument performance of both X-ray and neutron powder diffractometers. This report describes SRM 660c, the fourth generation of this powder diffraction SRM, which is used primarily for calibrating powder diffractometers with respect to line position and line shape for the determination of the instrument profile function (IPF). It is certified with respect to lattice parameter and consists of approximately 6 g of lanthanum hexaboride (LaB6) powder. So that this SRM would be applicable for the neutron diffraction community, the powder was prepared from an isotopically enriched 11B precursor material. The microstructure of the LaB6 powder was engineered specifically to yield a crystallite size above that where size broadening is typically observed and to minimize the crystallographic defects that lead to strain broadening. A NIST-built diffractometer, incorporating many advanced design features, was used to certify the lattice parameter of the LaB6 powder. Both Type A, statistical, and Type B, systematic, uncertainties have been assigned to yield a certified value for the lattice parameter at 22.5 °C of a = 0.415 682 6 ± 0.000 008 nm (95% confidence).

One challenge impeding the analysis of terabyte scale X-ray scattering data from the Linac Coherent Light Source (LCLS) is determining the number of clusters required for the execution of traditional clustering algorithms. Here, we demonstrate that the previous work using bi-cross validation to determine the number of singular vectors directly maps to the spectral clustering problem of estimating both the number of clusters and hyperparameter values. Applying this method to LCLS X-ray scattering data enables the identification of dropped shots without manually setting boundaries on detector fluence and provides a path toward identifying rare and anomalous events.

Ba3−xSrxTb3−xCexO9 (x = 1 and 1.5) ceramics (BSTC) with a relative density of 93% and a grain size distribution of 0.2–3 µm were prepared by the mixed-oxides reaction route. The crystalline structures, microstructures, valence states, and electrical properties of two ceramics were analyzed using X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and electrical measurements. Rietveld analyses of XRPD patterns show that BSTC1 is indexed as a trigonal structure with the space group R-3c, and BSTC3/2 is indexed as an orthorhombic perovskite structure with the space group Pmcn. The EPR, XPS, and electrical conductivity results confirm that Ce and Tb ions in BSTC exist as Ce4+ and mixed-valence states of Tb4+/Tb3+, respectively. At room temperature, the two BSTC ceramics exhibit a similar semiconducting behavior. The relationships between electrical conductivity and temperature/frequency are provided. The defect chemistry is discussed.

In this work, SnS1−xSex ternary nanobelts were synthesized by a facile hydrothermal method without the assistance of surfactants. The structure, morphology, microstructure, compositions, chemical valences, phonon modes, and optical band gaps of the SnS1−xSex nanobelts were characterized in detail. The results indicate that the SnS1−xSex nanobelts have uniform one-dimensional morphology and are single crystals with high crystallinity. Se is incorporated into the SnS lattice to substitute for S-forming ternary SnS1−xSex alloy. With the increase of Se doping concentration, the optical band gaps of the nanobelts gradually decrease from 1.15 to 1.01 eV, confirming the tunable optical property achieved here.

A commercial Empyrean X-ray diffractometer was adapted for combined grazing incidence X-ray fluorescence analysis (GIXRF) measurements with X-ray reflectivity (XRR) measurements. An energy-dispersive silicon drift detector was mounted and integrated in the angle-dependent data acquisition of the Empyrean. Different monochromator/X-ray optics units have been compared with the values obtained by the Atominstitut GIXRF + XRR spectrometer. Data evaluation was performed by JGIXA, a special software for combined GIXRF + XRR data fitting, developed at Atominstitut. A sample consisting of a ~50 nm nickel layer on a silicon substrate was used to compare the performance criteria (i.e. divergence and intensity) of the incident beam optics. An Empyrean X-ray diffractometer was successfully refitted to measure both GIXRF and XRR data.

An alternative neutron diffractometer performance, which documents the feasibility of using a high-resolution three-axis neutron diffractometer for elastic and plastic deformation studies of bulk metallic polycrystalline samples, is presented. Contrary to the conventional double-axis setting, the suggested alternative consists of an unconventional three-axis set-up employing a bent perfect crystal monochromator and an analyzer with a polycrystalline sample in between. Though the alternative is, for measurements, much more time-consuming, its sensitivity to the change of the diffraction angle of the sample is, however, substantially higher and permits also plastic deformation studies on the basis of analysis of the diffraction line profiles. Moreover, much larger widths (up to 10 mm) of the irradiated gauge volumes can be investigated when just slightly affecting the angular resolution properties of the experimental setting.

The crystal structure of trimethylarsine oxide dihydrate, (CH3)3AsO⋅2H2O, (TMAO dihydrate) has been solved using parallel tempering with the FOX software package and refined using synchrotron powder diffraction data obtained from beamline 08B1-1 at the Canadian Light Source. Rietveld refinement, performed with the software package GSASII, yielded orthorhombic lattice parameters of a = 13.3937(4) Å, b = 9.53025(30) Å, and c = 11.5951(3) Å (Z = 8, space group Pbca). The Rietveld refined structure was compared with density functional theory calculations performed with VASP and shows reasonable agreement. Arsenic K-edge X-ray absorption spectroscopy analysis also revealed additional information on the electronic structure of the arsenic atom within the TMAO dihydrate structure.

A provisional setup for X-ray microprobe experiments at 35 keV is described. It is based on compound refractive lenses (CRLs) for nanofocusing and a Vortex silicon drift detector with 2 mm sensor thickness for increased sensitivity at high energies. The Microprobe experiment (PETRA III) generally uses Kirkpatrick-Baez mirrors for submicrometer focusing in the energy range of 5–21 keV. However, various types of scanning X-ray microscopy experiments require higher excitation energies. The CRL optics were characterized by X-ray ptychography and X-ray fluorescence (XRF) knife edge scans on a siemens star pattern and showed beam sizes down to 110 nm. The performance of the new setup for microscopic X-ray diffraction (XRD)–XRF scanning X-ray microscopy measurements at 35 keV is demonstrated on a cross-section of a painting fragment.

Tooth enamel, the outermost layer of human teeth, is a complex, hierarchically structured biocomposite. The details of this structure are important in multiple human health contexts, from understanding the progression of dental caries (tooth decay) to understanding the process of amelogenesis and related developmental defects. Enamel is composed primarily of long, nanoscale crystallites of hydroxyapatite that are bundled by the thousands to form micron-scale rods. Studies with transmission electron microscopy show the relationships between small groups of crystallites and X-ray diffraction characterize averages over many rods, but the direct measurement of variations in local crystallographic structure across and between enamel rods has been missing. Here, we describe a synchrotron X-ray-based experimental approach and a novel analysis method developed to address this gap in knowledge. A ~500-nm-wide beam of monochromatic X-rays in conjunction with a sample section only 1 μm in thickness enables 2D diffraction patterns to be collected from small well-separated volumes within the enamel microstructure but still probes enough crystallites (~300 per pattern) to extract population-level statistics on crystallographic features like lattice parameter, crystallite size, and orientation distributions. Furthermore, the development of a quantitative metric to characterize relative order and disorder based on the azimuthal autocorrelation of diffracted intensity enables these crystallographic measurements to be correlated with their location within the enamel microstructure (e.g., between rod and interrod regions). These methods represent a step forward in the characterization of human enamel and will elucidate the variation of the crystallographic structure across and between enamel rods for the first time.

X-ray powder diffraction data for estra-4,9-diene-3,17-dione, C18H22O2, are reported [a = 9.236(7) Å, b = 10.294(4) Å, c = 15.471(1) Å, unit cell volume V = 1471.11 Å3, Z = 4, and space group P212121]. All measured lines were indexed and are consistent with the P212121 space group. No detectable impurities were observed. The single-crystallographic data of the compound are also reported [a = 9.2392(7) Å, b = 10.2793(5) Å, c = 15.4822(7) Å, unit cell volume V = 1470.37(15) Å3, Z = 4, and space group P212121]. Both single-crystal and powder diffraction methods can get the similar structure data.

Single crystals of Sm0.55Sr0.45Mn0.4Fe0.6O3 were grown by an optical floating zone technique in an oxygen atmosphere. The powder X-ray diffraction pattern for the grown crystal revealed single-crystalline nature. The lattice parameters and atomic structure were refined and indexed using a General Structure Analysis System (GSAS) to an orthorhombic structure with lattice parameters a = 5.4415 (32) Å, b = 7.6994 (27) Å, c = 5.43868 (28) Å, and space group Pnma.

The crystal structure of hyoscyamine sulfate monohydrate has been solved and refined using synchrotron X-ray powder diffraction data and optimized using density functional techniques. Hyoscyamine sulfate monohydrate crystallizes in space group P21 (#4) with a = 6.60196(2), b = 12.95496(3), c = 20.93090(8) Å, β = 94.8839(2)°, V = 1783.680(5) Å3, and Z = 2. Despite the traditional description as a dihydrate, hyoscyamine sulfate crystallizes as a monohydrate. The two independent hyoscyamine cations have different conformations, which have similar energies. One of the cations is close to the minimum-energy conformation. Each of the protonated nitrogen atoms in the cations acts as a donor to the sulfate anion. The hydroxyl group of one cation acts as a donor to the sulfate anion, while the hydroxyl group of the other cation acts as a donor to the water molecule. The water molecule acts as a donor to two different sulfate anions. The cations and anions are linked by complex chains of hydrogen bonds along the a-axis. The powder pattern has been submitted for inclusion in the Powder Diffraction File™ (PDF®).

X-ray powder diffraction data for new metal-organic compounds: tetrakis(3-ethylanilinium) octamolybdate Mo8O26(C8H12N)4 [a = 10.682(4), b = 16.589(5), c = 7.307(2) Å, α = 92.79(2)°, β = 97.99(3)°, γ = 103.89(3)°, V = 1240.27 Å3, Z = 1, space group P−1]; tetrakis(3-ethylanilinium) octamolybdate tetrahydrate Mo8O26(C8H12N)4·(H2O)4 [a = 18.801(7), b = 17.943(6), c = 7.334(3) Å, β = 98.50(5)°, V = 2446.99 Å3, Z = 2, space group P21/m] and bis(3-ethylanilinium) pentamolybdate Mo5O16(C8H12N)2 [a = 34.643(6), b = 5.5796(7), c = 14.200(3) Å, β = 96.20(2)°, V = 2728.69 Å3, Z = 4, space group I2/a] are reported in this paper. The investigated compounds were synthesized from molybdic acid and 3-ethylaniline in acidic solution. In the first two cases, we obtained octamolybdates, while the last compound crystallized as pentamolybdate.

Precious ornaments from the Museum Royal Tombs of Sipán were analyzed by X-ray computed microtomography (microCT). The ornaments analyzed were golden earrings produced by the Moche culture that flourished along the north coast of present-day Peru between approximately 100 and 600 AD. Sipán, also known as Huava Rajada, is a mochica archaeological complex in the north of Peru. In particular, the spectacular jewelry, mainly composed of gold, silver, and copper alloys, gilded copper, and tumbaga, from the Museum “Royal Tombs of Sipán,” in Lambayeque, north of Peru, are some of the most sophisticated metalworking ever produced of pre-Columbian America. A portable microCT system consisting of a high-resolution flat panel detector and a mini X-ray tube were used for the structural analysis of these ornaments. The microCT images show parts of the internal structure, highlighting the manufacturing technique and gold sheets joining techniques of the Moche artisans. Furthermore, the advantage of using the portable microCT system for nondestructive testing is clear when the sample cannot be taken to the laboratory.

The crystal structure of bisoprolol fumarate Form I has been solved and refined using synchrotron X-ray powder diffraction data and optimized using density functional techniques. Bisoprolol fumarate Form I crystallizes in space group P-1 (#2) with a = 8.165 70(5) Å, b = 8.516 39(12) Å, c = 16.751 79(18) Å, α = 89.142(1)°, β = 78.155(1)°, γ = 81.763(1)°, V = 1128.265(10) Å3, and Z = 2. The neutral side chain of the bisoprolol cation is probably disordered. The cation and anion are linked by N–H⋯O and O–H⋯O hydrogen bonds. The cations are also linked by N–H⋯O hydrogen bonds. The result is alternating layers of hydrophilic and hydrophobic layers parallel to the ab-plane. The density of the structure is relatively low at 1.130 g cm−3, but there are no obvious voids in the structure. The powder pattern is included in the Powder Diffraction File™ as entry 00-066-1625.

X-ray reference powder patterns and structures have been determined for a series of cobalt- and tungsten-containing cubic alkaline-earth perovskites, (BaxSr1–x)2CoWO6 (x = 0.1, 0.2, 0.3, 0.5, 0.7, and 0.9). The structure of the end members of the series, Sr2CoWO6 and Ba2CoWO6, were tetragonal and cubic, respectively, agreeing with the literature data. From Rietveld refinements, it was found that when x = 0.1 and 0.2, the structure was tetragonal I4/m (a = 5.60481(6) and 5.62305(11) Å and c = 7.97989(12) and 7.9847(2) Å, respectively; Z = 2). When x > 0.2, the structure was cubic (Fm$\bar{3}$m, No. 225; Z = 4) (from x = 0.3 to 0.9, a increases from 7.98399(13) to 8.08871(10) Å). This tetragonal series of compounds exhibit the characteristics of a distorted double-perovskite structure. The bond valence sum values for the alkaline-earth (Ba, Sr) sites in all (BaxSr1−x)2CoWO6 members are greater than the ideal value of 2.0, indicating over-bonding situation, whereas for the W sites, as x increases, a change from under-bonding to slightly over-bonding situation was observed. Density functional theory calculations revealed that while Sr2CoWO6 is a semiconductor, Ba2CoWO6 and SrBaCoWO6 are half-metals. Powder X-ray diffraction patterns of this series of compounds (BaxSr1−x)2CoWO6, with x = 0.1, 0.2, 0.3, 0.5, 0.7, and 0.9, have been submitted to be included in the Powder Diffraction File.