Two new isostructural minerals radekškodaite-(La) (CaLa5)(Al4Fe2+)[Si2O7][SiO4]5O(OH)3 and radekškodaite-(Ce) (CaCe5)(Al4Fe2+)[Si2O7][SiO4]5O(OH)3 were discovered in polymineralic nodules from the Mochalin Log REE deposit, South Urals, Russia. Radekškodaite-(La) is associated with allanite-(Ce), allanite-(La), bastnäsite-(Ce), bastnäsite-(La), ferriallanite-(Ce), ferriallanite-(La), ferriperbøeite-(La), fluorbritholite-(Ce), törnebohmite-(Ce) and törnebohmite-(La). Radekškodaite-(Ce) is associated with ancylite-(Ce), bastnäsite-(Ce), bastnäsite-(La), lanthanite-(La), perbøeite-(Ce) and törnebohmite-(Ce). The new minerals form isolated anhedral grains up to 0.35 × 0.75 mm [radekškodaite-(La)] and 1 mm × 2 mm [radekškodaite-(Ce)]. Both minerals are greenish-brown with vitreous lustre. Dcalc = 4.644 [radekškodaite-(La)] and 4.651 [radekškodaite-(Ce)] g cm–3. Both minerals are optically biaxial (+); radekškodaite-(La): α = 1.790(7), β = 1.798(5), γ = 1.825(8) and 2Vmeas = 60(10)°; radekškodaite-(Ce): α = 1.798(6), β = 1.806(6), γ = 1.833(8) and 2Vmeas = 65(10)°. Chemical data [wt.%, electron-microprobe; FeO:Fe2O3 by charge balance; H2O by stochiometry; radekškodaite-(La)/radekškodaite-(Ce)] are: CaO 3.40/2.74, La2O3 27.68/22.23, Ce2O3 20.39/24.30, Pr2O3 0.94/1.48, Nd2O3 1.71/3.18, ThO2 0.23/0.24, MgO 0.85/1.04, Al2O3 10.35/10.84, MnO 0.64/0.69, FeO 2.55/2.76, Fe2O3 3.12/2.57, TiO2 0.13/0.04, SiO2 26.03/26.10, F 0.10/0.09, H2O 1.62/1.63, –O=F –0.04/–0.04, total 99.70/99.89. The empirical formulae based on O28(OH,F)3 are: radekškodaite-(La): (Ca0.98Th0.01La2.75Ce2.01Nd0.16Pr0.09)Σ6.00(Al3.28Fe3+0.63Fe2+0.57Mg0.34Mn0.15Ti0.03)Σ5.00Si7.00O28[(OH)2.91F0.09]; radekškodaite-(Ce): (Ca0.79Mn0.16Th0.01Ce2.39La2.20Nd0.30Pr0.14)Σ5.99(Al3.43Fe2+0.62Fe3+0.52Mg0.42Ti0.01)Σ5.00Si7.00O28[(OH)2.92F0.08]. Both minerals are monoclinic, P21/m; the unit-cell parameters [radekškodaite-(La)/radekškodaite-(Ce)] are: a = 8.9604(3)/8.9702(4), b = 5.7268(2)/5.7044(2), c = 25.1128(10)/25.1642(13) Å, β = 116.627(5)/116.766(6)°, V = 1151.98(7)/1149.68(11) Å3 and Z = 2/2. The crystal structures are solved based on single-crystal X-ray diffraction data; R = 0.0554 [radekškodaite-(La)] and 0.0769 [radekškodaite-(Ce)]. Both minerals belong to the epidote–törnebohmite polysomatic series and represent first members of ET2-type: their structure consists of regular alternating modules, one slab of the epidote (E) structure and two slabs of törnebohmite (T). The rootname radekškodaite is given in honor of the Czech mineralogist Radek Škoda (born 1979), Associate Professor at Masaryk University, Brno, Czech Republic. The suffix-modifier -(La) or -(Ce) indicates the predominance of La or Ce among REE in the mineral.

Coquimbite, AlFe3+3(SO4)6(H2O)12⋅6H2O, was considered as a pure Fe3+ hydrated sulfate. However, previous mineralogical studies pointed out the occurrence of essential Al, occupying a distinct site in the crystal structure of this mineral. Through the critical re-examination of the available literature and new crystal-chemical data collected on a specimen from the Monte Arsiccio mine, Apuan Alps, Tuscany, Italy, the chemical formula of coquimbite has been revised, taking into account the occurrence of Al. Coquimbite has a homeotypic relationship with paracoquimbite, Fe4(SO4)6(H2O)12⋅6H2O; both mineral species belong to the coquimbite group. On the contrary, aluminocoquimbite, Al2Fe2(SO4)6(H2O)12⋅6H2O, has a different topology and does not belong to that group.

Sulfur-bearing monazite-(Ce) occurs in silicified carbonatite at Eureka, Namibia, forming rims up to ~0.5 mm thick on earlier-formed monazite-(Ce) megacrysts. We present X-ray photoelectron spectroscopy data demonstrating that sulfur is accommodated predominantly in monazite-(Ce) as sulfate, via a clino-anhydrite-type coupled substitution mechanism. Minor sulfide and sulfite peaks in the X-ray photoelectron spectra, however, also indicate that more complex substitution mechanisms incorporating S2– and S4+ are possible. Incorporation of S6+ through clino-anhydrite-type substitution results in an excess of M2+ cations, which previous workers have suggested is accommodated by auxiliary substitution of OH– for O2–. However, Raman data show no indication of OH–, and instead we suggest charge imbalance is accommodated through F– substituting for O2–. The accommodation of S in the monazite-(Ce) results in considerable structural distortion that may account for relatively high contents of ions with radii beyond those normally found in monazite-(Ce), such as the heavy rare earth elements, Mo, Zr and V. In contrast to S-bearing monazite-(Ce) in other carbonatites, S-bearing monazite-(Ce) at Eureka formed via a dissolution–precipitation mechanism during prolonged weathering, with S derived from an aeolian source. While large S-bearing monazite-(Ce) grains are likely to be rare in the geological record, formation of secondary S-bearing monazite-(Ce) in these conditions may be a feasible mineral for dating palaeo-weathering horizons.

The metamorphic history of the Mesoarchean Amikoq Layered Complex within the Akia terrane of SW Greenland was characterised by electron microprobe mineral data and detailed petrography on 12 representative samples, integrated with zircon U–Pb geochronology and petrology. The complex intruded into a >3004 Ma supracrustal association now consisting of granoblastic metabasites with subordinate quartz-rich gneiss. Supracrustal host rocks contain a relict high-temperature assemblage of orthopyroxene–clinopyroxene (± pigeonite exsolution lamellae, exsolved at ~975–1010°C), which is interpreted to pre-date the Amikoq intrusion. Cumulate to granoblastic-textured rocks of the main Amikoq Layered Complex range modally from leuconorite to melanorite, orthopyroxenite to harzburgite/dunite and rare hornblende melagabbro. Observed mineralogy of main complex noritic lithologies is essentially relict igneous with orthopyroxene–biotite and hornblende–plagioclase thermometers yielding temperatures of ~800–1070°C. An anatectic zircon megacryst from a patchy quartzo–feldspathic leucosome hosted in an orthopyroxene-dominated Amikoq rock reflects local anatexis at peak metamorphic P–T conditions and yields an intrusion minimum age of 3004 ± 9 Ma. Field observations indicate local anatexis of orthopyroxene-dominated lithologies, possibly indicating a post-intrusion peak temperature of >900°C. The last preserved stages of retrogression are recorded in paragneiss plagioclase–garnet, biotite–garnet and host rock ilmenite–magnetite pairs (≤3 kbar and ~380–560°C).

The Amikoq Complex intruded a MORB-like crustal section and the former remained relatively undisturbed in terms of modal mineralogy. Preservation of igneous textures and mineralogy are related to an anhydrous, high-grade metamorphic history that essentially mimics igneous crystallisation conditions, whereas local high-strain zones acted as fluid pathways resulting in hydrous breakdown of igneous minerals. There is no evidence of equilibration of the intrusion at sub-amphibolite-facies conditions.

The Cretaceous Okorusu carbonatite, Namibia, includes diopside-bearing and pegmatitic calcite carbonatites, both exhibiting hydrothermally altered mineral assemblages. In unaltered carbonatite, Sr, Ba and rare earth elements (REE) are hosted principally by calcite and fluorapatite. However, in hydrothermally altered carbonatites, small (<50 µm) parisite-(Ce) grains are the dominant REE host, while Ba and Sr are hosted in baryte, celestine, strontianite and witherite. Hydrothermal calcite has a much lower trace-element content than the original, magmatic calcite. Regardless of the low REE contents of the hydrothermal calcite, the REE patterns are similar to those of parisite-(Ce), magmatic minerals and mafic rocks associated with the carbonatites. These similarities suggest that hydrothermal alteration remobilised REE from magmatic minerals, predominantly calcite, without significant fractionation or addition from an external source. Barium and Sr released during alteration were mainly reprecipitated as sulfates. The breakdown of magmatic pyrite into iron hydroxide is inferred to be the main source of sulfate. The behaviour of sulfur suggests that the hydrothermal fluid was somewhat oxidising and it may have been part of a geothermal circulation system. Late hydrothermal massive fluorite replaced the calcite carbonatites at Okorusu and resulted in extensive chemical change, suggesting continued magmatic contributions to the fluid system.

The new mineral fluorapophyllite-(NH4), ideally NH4Ca4(Si8O20)F⋅8H2O, was found at the Vechec andesite quarry located near Vechec village, Vranov nad Topľou Co., Prešov Region, Slovak Republic. It occurs in cavities of quartz–illite–saponite–tobelite xenolith embedded in pyroxene andesite. Fluorapophyllite-(NH4) is associated with calcite, tridymite, pyrite, chabazite-Ca and heulandite-Ca. It forms clusters, aggregates or crystalline crusts consisting of individual, well-developed crystals up to 4 mm in size, exhibiting the forms {110}, {101} and {001}. The mineral is colourless to light pink and translucent with white streak and vitreous to pearly lustre; it is non-fluorescent under ultraviolet radiation. The Mohs hardness is ~4½ to 5, tenacity is brittle, fracture is irregular, and there is perfect cleavage on {001}. The calculated density is 2.325 g cm–3. Fluorapophyllite-(NH4) is optically uniaxial (+) with ω = 1.5414(5) and ɛ = 1.5393(8) (λ = 589 nm). It is non-pleochroic. The empirical formula (based on 29 O + F apfu) is [(NH4)0.55K0.32Na0.07Ca0.06]Σ1.00(Ca4.01Mg0.02)Σ4.03Si7.97O20[F0.84(OH)0.16]Σ1.00⋅8H2O. Fluorapophyllite-(NH4) is tetragonal, space group P4/mnc, a = 8.99336(9) Å, c = 15.7910(3) Å, V = 1277.18(3) Å3 and Z = 2. The seven strongest X-ray powder diffraction lines are [dobs in Å,(I,%)(hkl)]: 7.897(32)(002), 7.812(13)(101), 4.547(14)(103), 3.946(100)(004), 2.985(39)(105), 2.4841(11)(215) and 1.5788(12)(00.10). The crystal structure of fluorapophyllite-(NH4), refined to R1 = 0.0299 for 743 unique (I > 3σI) observed reflections, confirmed that the atomic arrangement is very similar to that of the other members of the apophyllite group. The new mineral is named according to the current nomenclature scheme for apophyllite-group minerals and is an NH4 dominant analogue of fluorapophyllite-(K), fluorapophyllite-(Na) and fluorapophyllite-(Cs).

The Duotoushan deposit is an important Fe–Cu deposit in the Aqishan–Yamansu metallogenic belt of eastern Tianshan, NW China. Magnetite occurs in two main habits which are common in many Fe–Cu deposits, i.e. platy (TD1 Mag) and granular magnetite (TD2 Mag) have been identified at Duotoushan. Platy magnetite shows two different zones (bright and dark) based on the observations by scanning electron microscopy. The bright part (TD1-L) is the main part of TD1 magnetite and lacks inclusions. The dark part (TD1-D) is very porous and has abundant tiny silicate inclusions. Granular magnetite is usually anhedral with obvious oscillatory zoning in back-scattered electron images. In general, the dark zones of magnetite are characterised by greater Si, Ca, Al and lesser Fe contents than the bright zones. In situ X-ray diffraction (XRD) analysis shows that the lattice parameter of TD1 magnetite is approximately equal to that of standard magnetite and slightly higher than that of TD2 magnetite, indicating that some cations with ionic radii smaller than those of Fe2+ or Fe3+ entered the magnetite lattice by simple or coupled substitution mechanisms in TD2 magnetite.

The results in the present study show that the effects of temperature and $f_{{\rm O}_ 2}$ on platy magnetite are very limited and the changing fluid composition might be the major controlling factor for the formation of Duotoushan platy magnetite. Although the possibility that mushketovite transformed from hematite cannot be excluded entirely, evidence from in situ XRD data, pore-volume ratio calculation and the growth habit of intergrown minerals indicates that platy magnetite (TD1) coexisting with amphibole was more likely to have been precipitated originally from hydrothermal fluid. This was then affected by changes in the fluid composition which consequently led to dissolution of primary magnetite (TD1-L) and re-precipitation of TD1-D magnetite (with abundant porosity and mineral inclusions). Meanwhile, granular magnetite (TD2) with oscillatory zoning, and coexisting with epidote and quartz, was precipitated from fluid with periodic variation in temperature. These oscillatory zones are characterised by bands enriched in Si, Al and Ca alternating with bands depleted in these elements. The present investigation revealed a complex evolutionary process for magnetite formation in the Duotoushan deposit. The importance of combined investigation of texture and compositional characterisation of magnetite for study of the ore genesis and evolution of Fe–Cu deposits is highlighted.

Exhalative mineral assemblages from fumaroles of Tolbachik volcano are very rich in anhydrous sulfate minerals of alkali and transition metals. Koryakite, ideally NaKMg2Al2(SO4)6, was found in the Yadovitaya fumarole of the Second scoria cone of the North Breach of the Great Tolbachik Fissure Eruption (1975–1976), Tolbachik volcano, Kamchatka Peninsula, Russia. Koryakite occurs as a product of fumarolic activity and closely associates with euchlorine and langbeinite. Koryakite is trigonal, R$\bar{3}$, a = 8.1124(11), c = 22.704(7) Å and V = 1294.0(5) Å3. The chemical composition determined by electron-microprobe analysis is (wt.%): Na2O 4.27, K2O 5.85, ZnO 0.31, СaO 0.31, CuO 0.76, MgO 10.15, Al2O3 11.47, Fe2O3 2.73, SO3 64.33 and SiO2 0.13, total 100.31. The empirical formula calculated on the basis of 24 O apfu is Na1.03K0.93(Mg1.89Cu0.07Ca0.04Zn0.03)Σ2.03(Al1.68Fe3+0.26)Σ1.94(S6.02Si0.02)Σ6.04O24. No natural or synthetic chemical analogues of koryakite are known to date. The topology of the [M2+2M3+2(SO4)6]2– heteropolyhedral framework in koryakite is very similar to the one in millosevichite, Al2(SO4)3 and mikasaite, Fe3+2(SO4)3. Replacement of part of the trivalent cations in the [M3+2(SO4)3]0 framework by divalent cations gives the framework a negative charge for koryakite and allows the incorporation of the alkali species in the channels. This structural mechanism is reminiscent of the concept of stuffed derivative structures. Koryakite is also structurally related to synthetic NaMgFe3+(SO4)3 and to the broader family of NASICON-related phases.

Petrovite, Na10CaCu2(SO4)8, is a new sulfate mineral discovered on the Second scoria cone of the Great Tolbachik fissure eruption. The mineral occurs as globular aggregates of tabular crystals up to 0.2 mm in maximal dimension, generally with gaseous inclusions. The empirical formula calculated on the basis of O = 32 is Na6(Na1.80K0.20)Σ2Na(Ca0.82Na0.06Mg0.02)Σ0.90(Cu1.84Mg0.16)Σ2(Na0.52□0.48)Σ1S8.12O32. The crystal-chemical formula is CuNa6−2xCax(SO4)4, which, for x ≈ 0.5, results in the idealised formula Na10CaCu2(SO4)8. The crystal structure of petrovite was determined using single-crystal X-ray diffraction data; the space group is P21/c, a = 12.6346(8), b = 9.0760(6), c = 12.7560(8) Å, β = 108.75(9)°, V = 1385.1(3) Å3, Z = 2 and R1 = 0.051. There are one Cu and six Na sites, one of which is also occupied by the essential amount of Ca. The Cu atom forms five Cu–O bonds in the range 1.980–2.180 Å and two long bonds ≈ 2.9 Å resulting in the formation of the CuO7 polyhedra, which share corners with SO4 tetrahedra to form isolated [Cu2(SO4)8]12− clusters. The clusters are surrounded by Na sites, which provide their linkage into a three-dimensional framework. The Mohs’ hardness is 4. The mineral is biaxial (+), with α = 1.498(3), βcalc = 1.500, γ = 1.516(3) and 2V = 20(10) (λ = 589 nm). The seven strongest lines of the powder X-ray diffraction pattern [d, Å (I, %) (hkl)] are: 7.21(27)(110); 6.25(38)(102); 4.47(31)(212); 3.95(21)(30$\bar{2}$); 3.85(17)(121); 3.70(36)(202); and 3.65(34)(22$\bar{1}$). The mineral is named in honour of Prof Dr Tomas Georgievich Petrov (b. 1931) for his contributions to mineralogy and crystallography and, in particular, for the development of technology for the industrial fabrication of jewellery malachite.

Oxycalciomicrolite (IMA2019-110), (Ca,Na)2(Ta,Nb,Ti)2O6(O,F), is a new member of microlite-group mineral found in the saprolite of the weathered Fumal pegmatite, located close to the city of Nazareno, Minas Gerais state, Brazil. It occurs as an accessory mineral associated with quartz, albite, microcline, muscovite, columbite-subgroup minerals, cassiterite, hematite, ilmenite, monazite-(Ce), xenotime-(Y), zircon, beryl, spinel, epidote and garnet-group minerals. Oxycalciomicrolite is found as octahedral crystals, occasionally modified to rhombododecahedra, ranging from 0.2 to 0.5 mm in size. The crystals are brownish-yellow to brownish-red and translucent, with white streak and vitreous to resinous lustre. The tenacity is brittle, with a Mohs hardness of 5–5½. Cleavage and parting are not observed; the fracture is conchoidal. Electron microprobe analysis, Raman and infrared spectroscopies and X-ray powder diffraction were applied to characterise this mineral. Oxycalciomicrolite is isotropic, ncalc. = 2.037, and the calculated density is 6.333 g/cm3. The composition is (Ca1.57□0.26Na0.06Sn0.03Sr0.03U0.02Mn0.02Fe0.01Ce0.01)∑2.00(Ta1.79Nb0.18Ti0.03)∑2.00O6.00[O0.64F0.19□0.17]∑1.00 analysed by electron microprobe using wavelength dispersive spectrometry. The unit-cell parameters obtained by Pawley fitting from powder X-ray diffraction data are a = 10.4325(4) Å and V = 1135.46(14) Å3 with Z = 8.

The Huanglongpu carbonatites are located in the north-western part of the Qinling orogenic belt in central China. Calcite carbonatite dykes at the Dashigou open pit are unusual due to their enrichment in heavy rare earth elements (HREE) relative to light rare earth elements (LREE), leading to a flat REE pattern, and in that the majority of dykes have a quartz core. They also host economic concentrations of molybdenite. The calcite carbonatite dykes show two styles of mineralogy according to the degree of hydrothermal reworking, and these are reflected in REE distribution and concentration. The REE in the little-altered calcite carbonatite occur mostly in magmatic REE minerals, mainly monazite-(Ce), and typically have ΣLREE/(HREE+Y) ratios from 9.9 to 17. In hydrothermally altered calcite carbonatites, magmatic monazite-(Ce) is partially replaced to fully replaced by HREE-enriched secondary phases and the rocks have ΣLREE/(HREE+Y) ratios from 1.1 to 3.8. The fluid responsible for hydrothermal REE redistribution is preserved in fluid inclusions in the quartz lenses. The bulk of the quartz lacks fluid inclusions but is cut by two later hydrothermal quartz generations, both containing sulfate-rich fluid inclusions with sulfate typically present as multiple trapped solids, as well as in solution. The estimated total sulfate content of fluid inclusions ranges from 6 to >33 wt.% K2SO4 equivalent. We interpret these heterogeneous fluid inclusions to be the result of reaction of sulfate-rich fluids with the calcite carbonatite dykes. The final HREE enrichment is due to a combination of factors: (1) the progressive HREE enrichment of later magmatic calcite created a HREE-enriched source; (2) REE–SO42– complexing allowed the REE to be redistributed without fractionation; and (3) secondary REE mineralisation was dominated by minerals such as HREE-enriched fluorocarbonates, xenotime-(Y) and churchite-(Y) whose crystal structures tends to favour HREE.

The general structural formula for the walentaite group is [((A1yA1’1–y), A2)(H2O)n][Bx(As2)2–x(As3)M1(M2)2(TO4)2(O,OH)7], based on heteropolyhedral layers of configuration [M1(M2)2(TO4)2(O,OH)6], with surface-coordinated species at the B, As2 and As3 sites, and with interlayer hydrated cation groups centred at the A sites. The group is divided into walentaite and halilsarpite subgroups based on T = P5+ and As5+, respectively. Alcantarillaite, (IMA2019-072), [Fe3+0.5□0.5(H2O)4][CaAs3+2(Fe3+2.5W6+0.5)(AsO4)2O7], is a new member of the walentaite group from the Alcantarilla wolframite mine, Belalcázar, Córdoba, Andalusia, Spain. It occurs most commonly as lemon-yellow fillings together with massive scorodite in fissures and cracks in quartz adjacent to löllingite. It is also found as tiny yellow rosettes lining vugs and as spheroids of ultrathin blades. It is associated with scorodite, pharmacosiderite, ferberite and schneiderhöhnite. Optically it is biaxial (–), with α = 1.703(calc), β = 1.800(5), γ = 1.850(5) and 2V = 68(1)° (white light). Dispersion is r > v, moderate. The optical orientation is X = a, Y = c and Z = b. The calculated density is 3.06 g cm–3. Electron microprobe analyses together with crystal structure refinement results gives the empirical formula [Fe3+0.52□0.48(H2O)4][(Ca0.44K0.11Na0.05Fe2+0.24□0.42)As3+1.83][Fe3+2.54Al0.03W6+0.43)((As0.65P0.35)O4)2O5.86(OH)1.14]. Alcantarillaite is orthorhombic, with an average structure described in Imma, and with a = 24.038(8) Å, b = 7.444(3) Å, c = 10.387(3) Å, V = 1858.6(11) Å3 and Z = 4. The structure (wRobs = 0.078 for 651 reflections to a resolution of 0.91 Å) differs most significantly from other walentaite-group members in having an interlayer A2 site occupied. Square-pyramidal polyhedra centred at the A2 sites form edge-shared dimers, (Fe3+)2O4(H2O)4. The dimers share vertices with TO4 anions in the layers on either side to form 8-sided channels along [010] occupied by H2O molecules.

Alstonite, BaCa(CO3)2, is a mineral described almost two centuries ago. It is widespread in Nature and forms magnificent cm-sized crystals. Notwithstanding, its crystal structure was still unknown. Here, we report the crystal-structure determination of the mineral and discuss it in relationship to other polymorphs of BaCa(CO3)2. Alstonite is trigonal, space group P31m, with unit-cell parameters a = 17.4360(6), c = 6.1295(2) Å, V = 1613.80(9) Å3 and Z = 12. The crystal structure was solved and refined to R1 = 0.0727 on the basis of 4515 reflections with Fo > 4σ(Fo) and 195 refined parameters. Alstonite is formed by the alternation, along c, of Ba-dominant and Ca-dominant layers, separated by CO3 groups parallel to {0001}. The main take-home message is to show that not all structure determinations of minerals/compounds can be solved routinely. Some crystals, even large ones displaying excellent diffraction quality, can be twinned in complex ways, thus making their study a crystallographic challenge.

Galena–tetrahedrite intergrowth textures have been observed in some quenched run products of melting experiments conducted at 500 and 600°C in the systems ZnS–PbS–FeS–Cu2S–Sb2S3 and ZnS–PbS–FeS–Cu2S–Sb2S3–As2S3, using the evacuated silica-tube method. At 600°C the intergrowth formed an interface between sulfide melt and galena, whereas at 500°C it existed as inclusions partially embedded or completely embedded within tetrahedrite. At 600°C tetrahedrite was absent in PbS-bearing experiments, instead galena and melt were a part of the equilibrium phase assemblage. From the disposition of the galena–tetrahedrite intergrowths at 500°C it is evident that droplets of galena–tetrahedrite melt coexisted with tetrahedrite or tetrahedrite + galena and gave rise to these intergrowths upon quenching. The intergrowths coexisting with galena probably represent compositions on the galena-rich liquidus in the galena–tetrahedrite binary and those coexisting with tetrahedrite represent points on the tetrahedrite-rich liquidus. A eutectic at galena:tetrahedrite = ~30:70, very close to 500°C is apparent. It is clearly indicated that galena–tetrahedrite intergrowths can be formed by sulfide partial melting, and could be used as a potential indicator of partial melting in metamorphosed sulfide ore deposits.

A platina sample brought to Spain in the last quarter of the 18th century is nowadays exhibited at the National Museum of Natural Sciences in Madrid. It originated from the ancient Mineralogical Museum of the School of Applied Chemistry at El Turco Street in Madrid and most probably corresponds to the material used by François Chabaneau for his experiments to purify platinum metal in the late 18th century. The sample is a heavy-mineral concentrate consisting of Pt–Fe alloys and gold nuggets associated with ilmenite–hematite, chromian spinel, goethite and minor quartz, sphene, rutile, magnetite, hornblende, garnet, calcite, pyrite, native bismuth and bismite. The Pt–Fe alloys exhibit a characteristic composition (81.97–90.75 wt.% Pt and 5.08–10.81 wt.% Fe with minor amounts of Cu, Os, Ir, Ru, Rh and Pd) and mineralogy of solid inclusions (abundant inclusions of Ir alloy as well as Os alloy, laurite–erlichmanite, bowieite, tulameenite and undetermined Pt–Pd–Ir–Rh antimonides and tellurides) that are very similar to those Pt–Fe alloys currently mined in western Colombia (the Chocó Department). These features allow us to discuss the provenance of the sample (probably from the proximal or medial reaches of any of the Chocó rivers) and evaluate the suitability of the Chabaneau's method for purifying platina. Our results show that the method became effective only with platina samples depleted or lacking iridium.

Khademite, ideally Al(SO4)F(H2O)5, from the Monte Arsiccio mine, Apuan Alps, Tuscany, Italy, has been characterised through quantitative electron microprobe analysis, micro-Raman spectroscopy and single-crystal X-ray diffraction. Khademite occurs as colourless to whitish tabular crystals, up to 5 mm. Electron microprobe analysis (in wt.%, average of 20 spot analyses) gave: SO3 35.43, Al2O3 21.27, F 6.92, H2Ocalc 39.73, sum 103.35, –O = F 2.92, total 100.43. On the basis of 10 anions per formula unit, assuming the occurrence of 5 H2O groups and 1 (F+OH) atom per formula unit, its chemical formula can be written as Al0.96S1.02O4[F0.84(OH)0.16]Σ1.00⋅5H2O. The Raman spectrum of khademite is characterised by the occurrence of vibrational modes of SO4 groups and by broad and strong bands due to the O–H stretching modes. Khademite is orthorhombic, space group Pcab, with unit-cell parameters a = 11.1713(2), b = 13.0432(3), c = 10.8815(2) Å, V = 1585.54(5) Å3 and Z = 8. The crystal structure refinement converged to R1 = 0.0293 on the basis of 2359 unique reflections with Fo > 4σ(Fo) and 152 refined parameters. The crystal structure of khademite is characterised by the alternation, along b, of two distinct kinds of {010} layers, one formed by [001] rows of isolated Al-centred octahedra, connected to each other through H bonds, and the other showing isolated SO4 groups. Along b, oxygen atoms belonging to SO4 groups act as acceptor of H bonds from H2O groups coordinating Al atoms. The new data improved the description of the H bonds in khademite and led us to discuss about the possible existence of its (OH)-analogue, rostite. In addition, Raman spectroscopic data were collected on the same crystal used for the crystal-chemical characterisation, allowing a comparison with previous results.

The Good Hope carbonatite is located adjacent to the Prairie Lake alkaline rock and carbonatite complex in northwestern Ontario. The occurrence is a heterolithic breccia consisting of diverse calcite, dolomite and ferrodolomite carbonatites containing clasts of magnesio-arfvedsonite + potassium feldspar, phlogopite + potassium feldspar together with pyrochlore-bearing apatitite clasts. The apatitite occurs as angular, boudinaged and schlieren clasts up to 5 cm in maximum dimensions. In these pyrochlore occurs principally as euhedral single crystals (0.1–1.5 cm) and can comprise up to 25 vol.% of the clasts. Individual clasts contain compositionally- and texturally-distinct suites of pyrochlore. The pyrochlores are hosted by small prismatic crystals of apatite (~100–500 μm × 10–25 μm) that are commonly flow-aligned and in some instances occur as folds. Allotriogranular cumulate textures are not evident in the apatitites. The fluorapatite does not exhibit compositional zonation under back-scattered electron spectroscopy, although ultraviolet and cathodoluminescence imagery shows distinct cores with thin (<50 μm) overgrowths. Apatite lacks fluid or solid inclusions of other minerals. The apatite is rich in Sr (7030–13,000 ppm) and rare earth elements and exhibits depletions in La, Ce, Pr and Nd (La/NdCN ratios (0.73–1.14) relative to apatite in cumulate apatitites (La/NdCN > 1.5) in the adjacent Prairie Lake complex. The pyrochlore are primarily Na–Ca pyrochlore of relatively uniform composition and minor Sr contents (<2 wt.% SrO). Irregular resorbed cores of some pyrochlores are A-site deficient (>50%) and enriched in Sr (6–10 wt.% SrO), BaO (0.5–3.5 wt.%), Ta2O5 (1–2 wt.%) and UO2 (0.5–2 wt.%). Many of the pyrochlores exhibit oscillatory zoning. Experimental data on the phase relationships of haplocarbonatite melts predicts the formation of apatite and pyrochlore as the initial liquidus phases in such systems. However, the texture of the clasts indicates that pyrochlore and apatite did not crystallise together and it is concluded that pyrochlores formed in one magma have been mechanically mixed with a different apatite-rich magma. Segregation of the apatite–pyrochlore assemblage followed by lithification resulted in the apatitites, which were disrupted and fragmented by subsequent batches of diverse carbonatites. The genesis of the pyrochlore apatitites is considered to be a process of magma mixing and not simple in situ crystallisation.

Arsenopyrite (FeAsS) and realgar (As4S4) are two common arsenic minerals that often cause serious environmental issues. Centralised treatment of arsenic-containing tailings can reduce land occupation and save management costs. The current work examined the remediation schemes of tailings from Hunan Province, China, where by different tailings containing arsenopyrite and realgar were blended with exogenous slag zero valence iron (ZVI). Introducing Fe-oxidising bacteria (Acidithiobacillus ferrooxidans) recreates a biologically oxidative environment. All bioleaching experiments were done over three stages, each for 7 days and the solid phase of all tests was characterised by scanning electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy and selective extraction analyses. The results showed that the mixture group reduced arsenic release by 72.9–74.7% compared with the control group. The addition of 0.2 g ZVI clearly decreased arsenic release, and the addition of 4.0 g ZVI led to the lowest arsenic release among all tests. The decrease of arsenic released from the tailings was due to the adsorption and uptake of arsenic by secondary iron-containing minerals and Fe–As(V) secondary mineralisation. The addition of large amounts of ZVI reduced the arsenic detected in the amorphous Fe precipitates. Therefore, a low cost and integrated strategy to reduce arsenic release from tailings is to mix two typical tailings and apply exogenous slag ZVI, which can apply to the in situ remediation of two kinds or more arsenic-containing tailings.

The rhodonite-group mineral with the idealised, end-member formula MnMn4[Si5O15] and the crystal chemical formula VIIM(5)MnVIM(1–3)Mn3VIIM(4)Mn[Si5O15] (Roman numerals indicate coordination numbers) is defined as a valid mineral species named vittinkiite after the type locality Vittinki (Vittinge) mines, Isokyrö, Western and Inner Finland Region, Finland. Vittinkiite is an isostructural analogue of rhodonite, ideally CaMn4[Si5O15], with Mn2+ > Ca at the M(5) site. Besides Vittinki, vitiinkiite was found in more than a dozen rhodonite deposits worldwide, however, it is significantly less common in comparison with rhodonite. The mineral typically forms pink to light pink massive, granular aggregates and is associated with quartz, rhodonite, tephroite, pyroxmangite and Mn oxides. Vittinkiite is optically biaxial (+), with α = 1.725(4), β = 1.733(4), γ = 1.745(5) and 2Vmeas = 75(10)° (589 nm). The chemical composition of the holotype (wt.%, electron microprobe) is: MgO 0.52, CaO, 0.93, MnO 51.82, FeO 1.26, ZnO 0.11, SiO2 46.48, total 101.12. The empirical formula calculated based on 15 O apfu is Mn4.71Ca0.11Fe0.11Mg0.08Zn0.01Si4.99O15. Vittinkiite is triclinic, space group P$\bar{1}$, with a = 6.6980(3), b = 7.6203(3), c = 11.8473(5) Å, α = 105.663(3), β = 92.400(3), γ = 94.309(3)°, V = 579.38(7) Å3 and Z = 2. The crystal structure is solved on a single crystal to R1 = 3.85%. Polymorphism of MnSiO3 (rhodonite-, pyroxmangite-, garnet- and clinopyroxene-type manganese metasilicates) is discussed, as well as the relationship between vittinkiite and pyroxmangite, ideally Mn7[Si7O21], and the application of infrared spectroscopy for the identification of manganese pyroxenoids.

Jahnsite-(CaMnZn), CaMn2+Zn2Fe3+2(PO4)4(OH)2⋅8H2O, is a new jahnsite-group mineral associated with alteration of phosphophyllite at the Hagendorf-Süd pegmatite, Bavaria. It forms as thin yellow crusts and brown epitactic growths on altered phosphophyllite, both of which comprise lath-like crystals in orthogonal orientation, up to 100 μm long. The crystals contain intergrowths of jahnsite-(CaMnZn) and jahnsite-(CaMnMn) on a scale of ~50 μm. The calculated density is 2.87 g cm−3 based on the empirical formula. Optically it is biaxial (–), with α = 1.675(2), β = 1.686(2) and γ = 1.691(2) (white light). The calculated 2V is 68°. Dispersion could not be observed, and the optical orientation is Z = b. Pleochroism was imperceptible. Electron microprobe analyses together with results from Mössbauer spectroscopy gives the formula (Ca0.59Mn0.24)Σ0.83Mn(Zn0.74Mn2+0.48Mg0.18Fe2+0.13Fe3+0.47)Σ2Fe3+2(P0.995O4)4(OH)2.03(H2O)7.97.

Jahnsite-(CaMnZn) is monoclinic, P2/a, with a = 15.059(1), b = 7.1885(6), c = 10.031(2) Å, β = 111.239(8)° and V = 1012.1(2) Å3. The recent International Mineralogical Association approved nomenclature system for jahnsite-group minerals was applied to establish jahnsite-(CaMnZn) from the empirical formula. The structural flexibility of jahnsite-group minerals to accommodate cations of quite different sizes in the X and M1 sites is discussed in terms of rotations about the 7 Å axis of two independent octahedra centred at the M3 sites.