A compact planar ultra-wideband (UWB) antenna with WiMAX and WLAN notched band is presented in this paper. The presented antenna consists of a rectangular patch and slotted partial ground plane and fed by a microstrip feed line. The volumetric size of the antenna is 30 mm × 22 mm × 1.6 mm. Method of moment-based simulation technology is used to simulate and analyze the characteristics of the antenna. To generate two notch bands at WiMAX and WLAN, a pair of parasitic resonator is placed beneath the radiating patch. The presented antenna achieves an operating band (VSWR ≤2) ranging from 2.98 to 12 GHz with an average gain of 3.95 dBi along with considerable efficiency and symmetric radiation patterns. Moreover, the antenna exhibits two notch bands at 3.5 and 5.45 GHz and is able to avoid possible interference with pre-existing narrow band services. The proposed antenna is low cost and low profile and is modeled to be used as a transceiver in UWB communication applications.

In this article, an extremely wideband, isolation-enhanced, low-profile “Multiple-Input-Multiple-Output” (MIMO) antenna along with dual-band-notched features has been investigated. The antenna proposed herein, possesses two mutually orthogonal staircase-etched radiators for achieving a wide bandwidth. The radiating elements are placed mutually perpendicular in order to achieve polarization diversity and high isolation, i.e. for minimization of mutual coupling effect between adjacent radiating elements. The antenna exhibits an extremely wide frequency bandwidth covering 1.2–19.4 GHz except two frequency band notches centered at 3.5 and 5.5 GHz, respectively, originated due to the incorporation of a “Rectangular Complementary Split Ring Resonator (RCSRR)” structure and by etching dual “L-shaped” slits in the ground plane. The center frequency of the notched bands is adjusted by fine tuning of the dimensions of the incorporated band-notching structures. Isolation level (S21) better than −20 dB has been obtained due to the insertion of a “T-shaped” parasitic element as a decoupling structure. A prototype of the proposed antenna having dimension of 20 mm × 20 mm (0.08 λo × 0.08 λo) is fabricated and the antenna responses have been measured. Obtained results show that the miniaturized MIMO diversity antenna is undoubtedly a capable contender for communications supporting an extremely wide impedance bandwidth along with band-notched features for WLAN and WiMAX.

Novel designs of a circularly polarized 2 × 2 and 4 × 4 slot array antennas (CPSAAs) are proposed. Sequential phase feed network composed of a section of 270° and four strips is utilized to feed the array structures. Array elements are simple linearly polarized wide slot antennas (WSAs) composed of simple radiating patches with truncation on four corners and slotted ground plane on substrate backside. Each WSA operates over the UWB frequency band of 3.1–10.6 GHz. When the WSAs are arranged in the form of 2 × 2 and 4 × 4 CPSAAs, frequency bands of 3–13.1 and 1.4–12.3 GHz are covered, respectively. More importantly, CP is generated at 4.5–8 and 4.6–8.8 GHz for 2 × 2 and 4 × 4 CPSAAs, respectively. This is while; the WSAs are linearly polarized elements. Higher gain values and wider bandwidths are obtained with respect to single WSA. Design process and performance analysis of the single and array antennas are discussed through the paper.