Burn patients are at high risk of central line–associated bloodstream infection (CLABSI). However, the diagnosis of such infections is complex, resource-intensive, and often delayed. This study aimed to investigate the epidemiology of CLABSI and develop a prediction model for the infection in burn patients. The study analysed the infection profiles, clinical epidemiology, and central venous catheter (CVC) management of patients in a large burn centre in China from January 2018 to December 2021. In total, 222 burn patients with a cumulative 630 CVCs and 5,431 line-days were included. The CLABSI rate was 23.02 CVCs per 1000 line-days. The three most common bacterial species were Acinetobacter baumannii, Staphylococcus aureus, and Pseudomonas aeruginosa; 76.09% of isolates were multidrug resistant. Compared with a non-CLABSI cohort, CLABSI patients were significantly older, with more severe burns, more CVC insertion times, and longer total line-days, as well as higher mortality. Regression analysis found longer line-days, more catheterisation times, and higher burn wounds index to be independent risk factors for CLABSI. A novel nomogram based on three risk factors was constructed with an area under the receiver operating characteristic curve (AUROC) value of 0.84 (95% CI: 0.782–0.898) with a mean absolute error of calibration curve of 0.023. The nomogram showed excellent predictive ability and clinical applicability, and provided a simple, practical, and quantitative strategy to predict CLABSI in burn patients.

We present a high-energy, hundred-picosecond (ps) pulsed mid-ultraviolet solid-state laser at 266 nm by a direct second harmonic generation (SHG) in a barium borate (BaB2O4, BBO) nonlinear crystal. The green pump source is a 710 mJ, 330 ps pulsed laser at a wavelength of 532 nm with a repetition rate of 1 Hz. Under a green pump energy of 710 mJ, a maximum output energy of 253.3 mJ at 266 nm is achieved with 250 ps pulse duration resulting in a peak power of more than 1 GW, corresponding to an SHG conversion efficiency of 35.7% from 532 to 266 nm. The experimental data were well consistent with the theoretical prediction. To the best of our knowledge, this laser exhibits both the highest output energy and highest peak power ever achieved in a hundred-ps/ps regime at 266 nm for BBO-SHG.

Pie charts are often used to communicate risk, such as the risk of driving. In the foreground-background salience effect (FBSE), foreground (probability of bad event) has greater salience than background (no bad event) in such a chart. Experiment 1 confirmed that the displays format of pie charts showed a typical FBSE. Experiment 2 showed that the FBSE resulted from a difference in cognitive efforts in processing the messages and that a foreground-emphasizing display was easier to process. Experiment 3 manipulated subjects’ information processing mindset and explored the interaction between displays format and information processing mindset. In the default mindset, careless subjects displayed a typical FBSE, while those who were instructed to be careful reported similar risk-avoidant behavior preference reading both charts. Suggestions for improving risk communication are discussed.

The carbonate-hosted Pb–Zn deposits in the Sichuan–Yunnan–Guizhou (SYG) triangle region are important Indosinian deposits in South China. The Tianbaoshan deposit is a typical large Pb–Zn deposit in the SYG area and occurs as pipe-like type, hosted by Sinian dolostone. It contains ∼26 Mt Zn–Pb ore (7.76–10.09 % Zn, 1.28–1.50 % Pb and 93.6 g t−1 Ag) and >0.1 Mt Cu ore (2.55 % Cu). In this study, the detailed mineral textures, mineral chemical and sulphur isotopic compositions of the various sulphides have been analysed to constrain the abnormal enrichment mechanism and mineralization relationship. Four mineralization stages have been recognized: Stage 1, minor early pyrite (Py1) with relics and infill of intergranular dolomite or quartz grains; Stage 2, Cu mineralization with coarse-grained, elliptical crystal chalcopyrite (Cp1); (3) Stage 3, Zn mineralization with dark fine-grained sphalerite (Sph1) and light coarse-grained sphalerite (Sph2); and (4) Stage 4, as represented by a quartz–calcite assemblage with galena, minor pyrite (Py2) and chalcopyrite (Cp2). The petrography of the sulphide minerals (Py1, Cp1, Sph1 and Sph2) demonstrates a mutual inclusion relationship. The nature of this relationship from core to rim and their similar sulphur isotope values (5.5–8.3 ‰) indicates a single sulphur source, suggesting that the different mineralization types are the result of different stages of a continuous hydrothermal system. Sphalerite geothermometer study suggests that sphalerite in the Tianbaoshan deposit formed in a low-temperature (<200 °C) hydrothermal system. The low concentrations of Mn and In, low In/Ge ratios and high Fe/Cd ratios in the sphalerite are consistent with those of Mississippi Valley-type (MVT) deposits, but different from those of magmatism-related deposits (e.g. epithermal, skarn and VMS deposits). The positive δ34S values for Py1 (5.1–7.9 ‰), Cp1 (5.1–7.2 ‰), Sph1 (4.7–7.4 ‰), Sph2 (3.9–8.7 ‰), Py2 (4.4–9.3 ‰) and Cp2 (5.0–6.8 ‰) indicate a sulphur source from thermochemical reduction of coeval seawater sulphate. Widely developed dissolved textures (caverns and breccias) with massive sulphide infillings and deformed host rock remnants suggest that replacement of host dolostones by ore fluids was volumetrically significant and the ore formed nearly simultaneously with the cavities. The Tianbaoshan deposit is a typical MVT deposit, which resulted from mixing of a H2S-rich fluid and a metal-rich fluid, with thermochemical sulphate reduction occurring before ore precipitation rather than during ore precipitation.

In this paper, we show that each element in the convex hull of the rotation set of a compact invariant chain transitive set is realized by a Birkhoff solution, which is an improvement of the fundamental lemma of T. Zhou and W.-X. Qin [Pseudo solutions, rotation sets, and shadowing rotations for monotone recurrence relations. Math. Z. 297 (2021), 1673–1692] in the study of rotation sets for monotone recurrence relations. We then investigate the properties of rotation sets assuming the system has zero topological entropy. The rotation set for a Birkhoff recurrence class is a singleton and the forward and backward rotation numbers are identical for each solution in the same Birkhoff recurrence class. We also show the continuity of rotation numbers on the set of non-wandering points. If the rotation set is upper-stable, then we show that each boundary point is a rational number, and we also obtain a result of bounded deviation.

The Jueluotage area, which is located in the southern branch of the Eastern Tianshan and northeast of the Tarim Basin, represents a vital locality for investigating intracontinental reactivation induced by the tectonic events at the Eurasian plate margin. This study applies zircon and apatite (U–Th)/He and apatite fission-track thermochronology to the Jueluotage area in the Eastern Tianshan. Our data and thermal history modelling show that the Jueluotage area experienced Triassic–Early Jurassic (˜240–180 Ma) cooling, reflecting the closure of the North Tianshan Ocean and subsequent far-field effects of collision/accretion of the Qiangtang Block and Kunlun terrane. Following this period of fast cooling, a differential exhumation process occurred between the various tectonic belts in the Jueluotage area. The Aqishan–Yamansu belt was exposed at the surface during the Triassic–Early Jurassic cooling phase and experienced subsequent burial, which continued until Early Cretaceous time when a pulse of exhumation occurred. However, the major fault zones (Kanggurtag ductile shear zone and Aqikkuduk Fault) and Central Tianshan arc have remained tectonically stable since Early Jurassic time. No Cenozoic rapid cooling was recorded by the low-temperature thermochronology results in this study, indicating that much of the Jueluotage area was exhumed to the upper crust in the late Mesozoic period.

We investigated the effects of botulinum toxin on gait in Parkinson’s disease (PD) patients with foot dystonia. Six patients underwent onabotulinum toxin A injection and were assessed by Burke–Fahn–Marsden Dystonia Rating Scale (BFMDRS), visual analog scale (VAS) of pain, Timed Up and Go (TUG), Berg Balance Test (BBT), and 3D gait analysis at baseline, 1 month, and 3 months. BFMDRS (p = 0.002), VAS (p = 0.024), TUG (p = 0.028), and BBT (p = 0.034) were improved. Foot pressures at Toe 1 (p = 0.028) and Midfoot (p = 0.018) were reduced, indicating botulinum toxin’s effects in alleviating the dystonia severity and pain and improving foot pressures during walking in PD.

Varicella is an acute respiratory infectious diseases, with high transmissibility and quick dissemination. In this study, an SEIR (susceptible-exposed-infected-recovered) dynamic model was established to explore the optimal prevention and control measures according to the epidemiological characteristics about varicella outbreak in a school in a central city of China. Berkeley Madonna 8.3.18 and Microsoft Office Excel 2010 software were employed for the model simulation and data management, respectively. The result showed that the simulated result of SEIR model agreed well with the reported data when β (infected rate) equal to 0.067. Models showed that the cumulative number of cases was only 13 when isolation adopted when the infected individuals were identified (assuming isolation rate was up to 100%); the cumulative number of cases was only two and the TAR (total attack rate) was 0.56% when the vaccination coefficient reached 50%. The cumulative number of cases did not change significantly with the change of efficiency of ventilation and disinfection, but the peak time was delayed; when δ (vaccination coefficient) = 0.1, m (ventilation efficiency) = 0.7 or δ = 0.2, m = 0.5 or δ = 0.3, m = 0.1 or δ = 0.4 and above, the cumulative number of cases would reduce to one case and TAR would reduce to 0.28% with combined interventions. Varicella outbreak in school could be controlled through strict isolation or vaccination singly; combined interventions have been adopted when the vaccination coefficient was low.

Novel NiMoO4-integrated electrode materials were successfully prepared by solvothermal method using Na2MoO4·2H2O and NiSO4·6H2O as main raw materials, water, and ethanol as solvents. The morphology, phase, and structure of the as-prepared materials were characterized by SEM, XRD, Raman, and FT-IR. The electrochemical properties of the materials in supercapacitors were investigated by cyclic voltammetry, constant current charge–discharge, and electrochemical impedance spectroscopy techniques. The effects of volume ratio of water to ethanol (W/E) in solvent on the properties of the product were studied. The results show that the pure phase monoclinic crystal NiMoO4 product can be obtained when the W/E is 2:1. The diameter and length are 0.1–0.3 µm and approximately 3 µm, respectively. As an active material for supercapacitor, the NiMoO4 nanorods material delivered a discharge specific capacitance of 672, 498, and 396 F/g at a current density of 4, 7, and 10 A/g, respectively. The discharge specific capacitance slightly decreased from 815 to 588 F/g with a retention of 72% after 1000 cycles at a current density of 1 A/g. With these superior capacitance properties, the novel NiMoO4 integrated electrode materials could be considered as promising material for supercapacitors.

Chickenpox is a common acute and highly contagious disease in childhood; moreover, there is currently no targeted treatment. Carrying out an early warning on chickenpox plays an important role in taking targeted measures in advance as well as preventing the outbreak of the disease. In recent years, the infectious disease dynamic model has been widely used in the research of various infectious diseases. The logistic differential equation model can well demonstrate the epidemic characteristics of epidemic outbreaks, gives the point at which the early epidemic rate changes from slow to fast. Therefore, our study aims to use the logistic differential equation model to explore the epidemic characteristics and early-warning time of varicella. Meanwhile, the data of varicella cases were collected from first week of 2008 to 52nd week of 2017 in Changsha. Finally, our study found that the logistic model can be well fitted with varicella data, besides the model illustrated that there are two peaks of varicella at each year in Changsha City. One is the peak in summer–autumn corresponding to the 8th–38th week; the other is in winter–spring corresponding to the time from the 38th to the seventh week next year. The ‘epidemic acceleration week’ average value of summer–autumn and winter–spring are about the 16th week (ranging from the 15th to 17th week) and 45th week (ranging from the 44th to 47th week), respectively. What is more, taking warning measures during the acceleration week, the preventive effect will be delayed; thus, we recommend intervene during recommended warning weeks which are the 15th and 44th weeks instead.

The volatile compounds of crofton weed infested by cotton aphids and sprayed with MeJA were collected and analyzed by the TCT-GC/MS technique. The healthy weeds were controls. Seventeen volatiles identified from crofton weed included green leaf odors, monoterpenes and sequiterpenes, and oxo-compounds. Camphene, 2-carene, α-phellandrene, ρ-cymene, and caryophyllene were the major volatiles and constituted about 77% of the total volatile emissions from the control. In the aphid-infested weeds, no new induced component was found. Among the terpenes, ρ-cymene increased markedly in the infested weeds compared with the control, whereas all sesquiterpenes decreased markedly. Levels of endogenous JA in leaves and young stems of the aphid-infested weeds were markedly higher than in the control, whereas both endogenous SA level and ABA level were not significantly different. MeJA sprayed on crofton weed with the aphid infestation had a similar effect on volatile emissions. It is suggested that JA was one of the most important signals in crofton weed and could regulate the emission of volatile compounds.

In this paper, field effect transistors (FET) based on different kinds of non-graphene materials are introduced, which are MoS2, WSe2 and black phosphorus (BP). Those devices have their unique features in fabrication process compared with conventional FETs. Among them, MoS2 FET shows better electrical characteristics by applying a SiO2 protective layer; WSe2 FET is fabricated based on a new low pressure chemical vapor deposition (LPCVD) method; BP FET acquires high on/off ratio and high hole mobility by using a simple dry transfer method. Those novel non-graphene materials inspire new design and fabrication process of basic logic device.

We associate the existence or non-existence of rotational invariant circles of an area-preserving twist map on the cylinder with a physically motivated quantity, the depinning force, which is a critical value in the depinning transition. Assume that $H:\mathbb{R}^{2}\mapsto \mathbb{R}$ is a $C^{2}$ generating function of an exact area-preserving twist map $\bar{\unicode[STIX]{x1D711}}$ and consider the tilted Frenkel–Kontorova (FK) model:

$$\begin{eqnarray}{\dot{x}}_{n}=-D_{1}H(x_{n},x_{n+1})-D_{2}H(x_{n-1},x_{n})+F,\quad n\in \mathbb{Z},\end{eqnarray}$$

$F\geq 0$

$F_{d}(\unicode[STIX]{x1D714})$

$\unicode[STIX]{x1D714}$

$\unicode[STIX]{x1D714}$

$\bar{\unicode[STIX]{x1D711}}$

$F_{d}(\unicode[STIX]{x1D714})=0$

$\unicode[STIX]{x1D714}$

$F_{d}(\unicode[STIX]{x1D714})=0$

$\bar{\unicode[STIX]{x1D711}}$

$\unicode[STIX]{x1D714}$

$F_{d}(\unicode[STIX]{x1D714})$

$\unicode[STIX]{x1D714}$