In preparation for an experiment with a laser-generated intense proton beam at the Laser Fusion Research Center at Mianyang to investigate the 11B(p,α)2α reaction, we performed a measurement at very low proton energy between 140 keV and 172 keV using the high-voltage platform at the Institute of Modern Physics, Lanzhou. The aim of the experiment was to test the ability to use CR-39 track detectors for cross-section measurements and to remeasure the cross-section of this reaction close to the first resonance using the thick target approach. We obtained the cross-section σ = 45.6 ± 12.5 mb near 156 keV. Our result confirms the feasibility of CR-39 type track detector for nuclear reaction measurement also in low-energy regions.

A 336-cm-long sediment core spanning the last 130 ka was recovered from Lake Xingkai on the northeastern margin of the East Asian summer monsoon domain to reveal the linkage between lacustrine depositional processes and environmental changes. Bayesian end member modeling analysis was conducted to partition and interpret the grain-size distributions of Lake Xingkai sediments. Our results suggest that the sedimentary system is characterized by three end members (EMs). EM1 and EM2, with a modal value of 13 and 10 μm, respectively, indicate the variation of local hydraulic conditions. EM3, with a modal value of 5 μm, reflects the background atmospheric dust loading. High atmospheric dust concentration generally occurred during Marine Isotope Stage (MIS) 5d, MIS 4, and early MIS 3, when the climate in the Asian dust source region was cold and dry. In contrast, low dust concentration prevailed during MIS 2, likely due to the southward shift of the westerlies driven by maximum ice volume in the high latitudes.

This article outlines the evolution of a rescue team in responding to adenovirus prevention with a deployable field hospital. The local governments mobilized a shelter hospital and a rescue team consisting of 59 members to assist with rescue and response efforts after an epidemic outbreak of adenovirus. We describe and evaluate the challenges of preparing for deployment, field hospital maintenance, treatment mode, and primary treatment methods. The field hospital established at the rescue scene consisted of a medical command vehicle, a computed tomography shelter, an X-ray shelter, a special laboratory shelter, an oxygen and electricity supply vehicle, and epidemic prevention and protection equipment. The rescue team comprised paramedics, physicians, X-ray technicians, respiratory therapists, and logistical personnel. In 22 days, more than 3000 patients with suspected adenovirus infection underwent initial examinations. All patients were properly treated, and no deaths occurred. After emergency measures were implemented, the spread of adenovirus was eventually controlled. An emergency involving infectious diseases in less-developed regions demands the rapid development of a field facility with specialized medical personnel when local hospital facilities are either unavailable or unusable. An appropriate and detailed prearranged action plan is important for infectious diseases prevention. (Disaster Med Public Health Preparedness. 2018;12:109–114)

The corrosion behavior of 2099 Al–Li alloy in NaCl aqueous solutions with different concentrations (1.5, 3.5, and 5.0% in mass fraction) was investigated. Its corrosion resistance was evaluated using electrochemical measurements together with full immersion tests. The results showed that the 2099 Al–Li alloy possessed good corrosion resistance in NaCl aqueous solutions. Its corrosion rate increased with increasing chloride ion concentration. The main form of corrosion failure was pitting corrosion. The impurity containing sulfur leads to surface pitting. The oxide films that formed during the manufacturing process offer a good resistance to corrosion. They are likely to suffer separation, cracking, and drop-off when immersed in aggressive NaCl aqueous solution. The good corrosion susceptibility of the alloy may be attributed to homogeneous coherent nanoscale precipitates.

This work presents the preparation and characterization of N-doped TiO2 nanocrystals obtained by a solid-state reaction in vacuum with urea as the nitrogen source. The particle sizes of the products are smaller than 20 nm from the x-ray powder diffraction patterns and the transmission electron microscopy images. Different from the reported samples obtained in air or under dry N2 or NH3 gas flow, the doped nitrogen exists mainly as absorbed NOx groups but as smaller incorporated species in the nanocrystals, which is supported by the results from x-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and ultraviolet–visible diffuse reflectance spectroscopy. Dependent on the nitrogen amount, the surface photovoltage (SPV) response reaches the maximum at the mediate molar ratio of 5:4 (urea to TiO2), which can be explained that proper nitrogen concentration can enhance the separation of the photogenerated carriers to improve the SPV intensity, but excess nitrogen can spread the impurity energy levels to narrow energy gaps, which reinforces the combination of the photogenerated electrons and holes and then decreases the SPV signal. The corresponding detailed discussion is also reported.

A natural number $n$ is called multiperfect or $k$-perfect for integer $k\ge 2$ if $\sigma (n)=kn$, where $\sigma (n)$ is the sum of the positive divisors of $n$. In this paper, we establish a theorem on odd multiperfect numbers analogous to Euler’s theorem on odd perfect numbers. We describe the divisibility of the Euler part of odd multiperfect numbers and characterise the forms of odd perfect numbers $n=\pi ^\alpha M^2$ such that $\pi \equiv \alpha ~({\rm mod}~8)$, where $\pi ^\alpha $ is the Euler factor of $n$. We also present some examples to show the nonexistence of odd perfect numbers of certain forms.

Let k≥2 be an integer. A natural number n is called k-perfect if σ(n)=kn. For any integer r≥1, we prove that the number of odd k-perfect numbers with at most r distinct prime factors is bounded by (k−1)4r3.

For the first time, we measured Raman spectra from Li(Al1-xCox)O2 (x = 0.5 to 0.9), a new cathode material for lithium batteries. Whereas LiCoO2 sintered at 400 °C develops a spinel structure, Li(Al1-xCox)O2 sintered at 380 °C is amorphous, as shown by its single broad Raman band. Li(Al1-xCox)O2 sintered at 700 or 900 °C shows Raman peaks independent of x that coincide with those from LiCoO2, indicating that Li(Al1-xCox)O2 has the α–NaFeO2 structure (space group R3m). Traces of the impurity phase Co3O4 appear in samples treated at 900 °C but not at 700 °C. The Raman peak widths exceed those in LiCoO2, suggesting that replacement of Co by Al increases disorder among the Li ions.