Porous materials have peculiar characteristics that are relevant for inertial confinement fusion (ICF). Among them, chemically produced foams are proved to be able to smooth the laser inhomogeneities and to increase the coupling of the laser with the target. Foams realized with other elements and techniques may prove useful as well for ICF applications. In this work, we explore the potential of a novel class of porous materials for ICF, namely, carbon nanofoams produced with the pulsed laser deposition (PLD) technique, by means of hydrodynamic numerical simulations. By comparison with a simulation of solid-density carbon, PLD nanofoams show a higher pressure at the shock front, which could make them potential good candidates as ablators for a capsule for direct-drive fusion.

Helium or neopentane can be used as surrogate gas fill for deuterium (D2) or deuterium-tritium (DT) in laser-plasma interaction studies. Surrogates are convenient to avoid flammability hazards or the integration of cryogenics in an experiment. To test the degree of equivalency between deuterium and helium, experiments were conducted in the Pecos target chamber at Sandia National Laboratories. Observables such as laser propagation and signatures of laser-plasma instabilities (LPI) were recorded for multiple laser and target configurations. It was found that some observables can differ significantly despite the apparent similarity of the gases with respect to molecular charge and weight. While a qualitative behaviour of the interaction may very well be studied by finding a suitable compromise of laser absorption, electron density, and LPI cross sections, a quantitative investigation of expected values for deuterium fills at high laser intensities is not likely to succeed with surrogate gases.

Liquid leaf targets show promise as high repetition rate targets for laser-based ion acceleration using the Target Normal Sheath Acceleration (TNSA) mechanism and are currently under development. In this work, we discuss the effects of different ion species and investigate how they can be leveraged for use as a possible laser-driven neutron source. To aid in this research, we develop a surrogate model for liquid leaf target laser-ion acceleration experiments, based on artificial neural networks. The model is trained using data from Particle-In-Cell (PIC) simulations. The fast inference speed of our deep learning model allows us to optimize experimental parameters for maximum ion energy and laser-energy conversion efficiency. An analysis of parameter influence on our model output, using Sobol’ and PAWN indices, provides deeper insights into the laser-plasma system.

The laser-induced breakdown spectroscopy (LIBS) technique is one of the most promising laser-based analytical techniques. Coincidentally, the LIBS acronym was proposed by Radziemski and Loree in two seminal papers published in 1981, almost at the same time in which the Laser and Particle Beams journal started its publication. In this contribution, the evolution of the LIBS technique is discussed following a chronological collection of key papers in LIBS, some of which were in fact published on LPB.

The topic of proton-boron fusion has recently attracted considerable interest in the scientific community, both for its future perspectives for energy production and for nearer-term possibilities to realize high-brightness α-particle sources. Very interesting experimental results have been obtained, in particular in laser-driven experiments but also using other experimental approaches. The goal of this special issue is to collect the most recent developments in experiments, theory, advanced targetry, diagnostics, and numerical simulation codes.

The energy problem is an open issue becoming increasingly pressing. The possibility to use nuclear fusion as an alternative energy source is thus acquiring progressively more importance and many investors are pushing to achieve the goal of an electric plant based on fusion. The most studied reaction is the deuterium-tritium one, but this poses several technical issues related to the handling of the radioactive fuel and neutron generation. In this frame, the aneutronic 11B(p, α)2α fusion reaction has attracted the interest of many researchers. Despite a fusion reactor based on pB is still a long-term goal, the study of this reaction is important both for astrophysics research and for its possible employment in schemes of high brightness source of α particles for applications, as for instance in medicine. Nevertheless, the univocal identification of the produced alphas is a well-known challenging task when the reaction is triggered by high-intensity lasers. Indeed, due to the multifaceted emission typical of laser-matter interactions, the signal coming from alphas is often superimposed to that generated by protons and by other ions, and in many cases, it is therefore hardly recognizable. In this work, we analysed the possibility of employing a Thomson spectrometer (TS) with an adequate differential filtering system for the exclusion from the α-particle trace, the contribution of all other ionic species. Moreover, for the energy ranges where the filtering method cannot be successfully applied, we investigated the feasibility of integrating in the TS assembly a particle detector for time-of-flight (TOF) measurements.

Short-pulse, ultrahigh-intensity lasers have opened new regimes for studying fusion plasmas and creating novel ultrashort ion beams and neutron sources. Diagnosing the plasma in these experiments is important for optimizing the fusion yield but difficult due to the picosecond time scales, 10 s of micron-cubed volumes, and high densities. We propose to use the yields of photons and neutrons produced by parallel reactions involving the same reactants to diagnose the plasma conditions and predict the yields of specific reactions of interest. In this work, we focus on verifying the yield of the high-interest aneutronic proton-boron fusion reaction ${}^{11}B{\left(p,2\alpha \right)}^{4}He$, which is difficult to measure directly due to the short stopping range of the produced αs in most materials. We identify promising photon-producing reactions for this purpose and compute the ratios of the photon yield to the α yield as a function of plasma parameters. In beam-fusion experiments, the 11C yield is an easily-measurable observable to verify the α yield. In light of our results, improving and extending measurements of the cross-sections for these parallel reactions are important steps to gain greater control over these laser-driven fusion plasmas.

This study is the further research of the path encoding pulse compression technique. In this study, the regularity of pulse compression gain is studied by adopting the numerical simulation and experiment measurement methods. For the lossless cavity, the power gain has the characteristic of equal pulse length with equal compression gain contribution according to the numerical simulation results. It means that the pulse compression gain is increased linearly along with the time length of the input pulse. The obtained pulse power gains are equal for the two subpulses intercepted arbitrarily form the input pulse with equal time length for the pulse compression. For the lossy cavity, the power gain usually does not increase significantly after the length of input pulse reaches to a certain value. The gain contribution decreases gradually along with the increase of time length of input pulse until the growth rate of gain contribution equals to zero. Assuming two subpulses with equal time length were intercepted from the input pulse, the gain contribution of the earlier subpulse is lower than that of the later subpulse. The measured results verified the simulated gain contribution regularity according to the established experimental system.

Earlier, the experiments on the aneutronic proton-boron (pB) fusion in a miniature nanosecond vacuum discharge (NVD) with oscillatory plasma confinement and correspondent α particles yield were presented. In this work, we consider some specific features of oscillatory confinement as a relatively new type of plasma confinement for fusion. Particle-in-cell (PiC) simulations of pB fusion processes have shown that the plasma in NVD, and especially on the discharge axis, is in a state close to a quasineutral one, which is rather different from the conditions in the well-known scheme of periodically oscillating plasma spheres (POPSs) suggested earlier for fusion. Apparently, small-scale oscillations in NVD are a mechanism of resonant ion heating, unlike coherent compressions in the original POPS scheme. Nevertheless, the favorable scaling of the fusion power in NVD turns out to be close to the POPS fusion but differs significantly both in the compression ratio and in the values of the parameter of quasineutrality. In addition, unlike the POPS scheme, PiC simulation reveals that the distribution functions of protons and boron ions in NVD are non-Maxwellian. Therefore, we have an aneutronic pB synthesis in a nonequilibrium plasma remaining “nonignited” on the discharge axis.

Solid-state nuclear track detectors (CR-39 type) are frequently used for the detection of ions accelerated by laser-plasma interaction because they are sensitive to each single particle. To the present day, CR-39 detectors are the main diagnostics in experiments focused on laser-driven proton-boron (p11B) fusion reactions to detect alpha particles, which are the main products of such a nuclear reaction, and to reconstruct their energy distribution. However, the acceleration of multispecies ions in the laser-generated plasma makes this spectroscopic method complex and often does not allow to unambiguously discriminate the alpha particles generated from p11B fusion events from the laser-driven ions. In this experimental work, performed at the PALS laser facility (600 J, 300 ps, laser intensity 1016 W/cm2), CR-39 detectors were used as main detectors for the angular distribution of the produced alpha particles during a p11B fusion dedicated experimental campaign. Additionally, a CR-39 detector was set inside a Thomson Parabola (TP) spectrometer with the aim to calibrate the CR-39 response for low energetic laser-driven ions originating from the plasma in the given experimental conditions. The detected ion energies were ranging from hundreds of keV to a few MeV, and the ion track diameters were measured for etching times up to 9 hours. The goal of the test was the evaluation of the detectors’ ability to discriminate the alpha particles from the aforementioned ions. Within this study, the calibration curves for protons and silicon low energy ions are accomplished, the overlapping of the proton tracks and alpha particles is verified, and a methodology to avoid this problem is realized.

Laser-driven wakefield acceleration (LWFA) has attracted lots of attention in recent years. However, few writers have been able to make systematic research into the bow waves generated along with the wake waves. Research about the bow waves will help to improve the understanding about the motion of the electrons near the wake waves. In addition, the relativistic energetic electron density peaks have great potential in electron acceleration and reflecting flying mirrors. In this paper, the bow waves generated in laser-plasma interactions as well as the effects of different laser and plasma parameters are investigated. Multidimensional particle-in-cell simulations are made to present the wake waves and bow waves by showing the electron density and momentum distribution as well as the electric field along x and y directions. The evolution of the bow wave structure is investigated by measuring the open angle between the bow wave and the wake wave cavity. The angle as well as the peak electron density and transverse momentum is demonstrated with respect to different laser intensities, spot sizes, plasma densities, and preplasma lengths. The density peak emits high-order harmonics up to 150 orders and can be a new kind of “flying mirror” to generate higher order harmonics. The study on the bow waves is important for further investigation on the electron motion around the wake waves, generation of dense electron beams, generation of high-order harmonics, and other research and applications based on the bow waves.

In preparation for an experiment with a laser-generated intense proton beam at the Laser Fusion Research Center at Mianyang to investigate the 11B(p,α)2α reaction, we performed a measurement at very low proton energy between 140 keV and 172 keV using the high-voltage platform at the Institute of Modern Physics, Lanzhou. The aim of the experiment was to test the ability to use CR-39 track detectors for cross-section measurements and to remeasure the cross-section of this reaction close to the first resonance using the thick target approach. We obtained the cross-section σ = 45.6 ± 12.5 mb near 156 keV. Our result confirms the feasibility of CR-39 type track detector for nuclear reaction measurement also in low-energy regions.

A transmission line circuit model was conducted to compare the performances of the two-level 2.5 Ω magnetically insulated transmission lines (MITLs) system of a 5-MA linear-transformer-driver (LTD) accelerator for two kinds of typical loads, including bremsstrahlung electron beam diodes and Z-pinch loads. Both the electron current loss in the pulse front during the magnetic insulation setup process and the electron flow distribution in the magnetic insulation steady state were analyzed. When the accelerator drives an electron beam diode load with impedance of 1.20 Ω (a single level), the duration of the magnetic insulation setup is about 12 ns, the current loss is about 130 kA in a single MITL level, the maximum electron flow current is about 50 kA in the end of MITL, and its amplitude decreases gradually after the steady magnetic insulation is established. When the accelerator drives a Z-pinch load with length of 1.5 cm, radius of 1.2 cm, and mass of 0.3 mg/cm, the duration of the magnetic insulation setup is almost zero, the maximum electron flow current in the end of MITL can reach about 55 kA (a single level), and the waveform of the electron flow resembles a saddle shape, which reaches the peak at the pinch stagnation time.

The aneutronic 11B(p, α)2α fusion reaction driven by the interaction of high-energy lasers with matter has become a popular topic of research, since it represents a potential long-term goal alternative to the most studied deuterium-tritium reaction. However, the detection of the typical ionic products, especially alpha particles, of this low-rate fusion reaction is a challenging issue, due to their low flux. One of the diagnostic devices that can be implemented in laser-driven proton-boron fusion experiments is a Thomson spectrometer (TS), which is capable of detecting and discriminating ions according to their mass-to-charge ratio (A/Z, where A is the mass number and Z is the atomic number of the ions). In this work, we report on the ultimate test of a TS, which was designed and developed at the ENEA Research Centre in Frascati, Italy, in the context of a p + 11B fusion experiment. Our device—designed to have high sensitivity and a robust shielding against electromagnetic pulses (EMPs)—was implemented at the PALS laser facility (∼700 J in ∼350 ps pulses) at a distance of 367 mm from the laser-plasma interaction point. We analyse here the measured signals obtained with our device, focusing on the assessment of their signal-to-background ratio. Despite the presence of strong EMPs and background radiation at such a short distance from the laser-irradiated target, the TS proved to be suitable for effectively detecting protons and heavier ions stemming from the plasma source.