A contactless method of probing and analyzing multifunctional oxide interfaces using an electron energy analyzer inside a scanning electron microscope is presented. High contrast experimental secondary electron analyzer signals are used to detect changes in the interface conductivity of a LaAlO3/SrTiO3 sample. Monte Carlo simulations of the primary beam/specimen interaction are carried out and correlated with the experimental results in order to help understand the role of the primary beam energy and adjust it to enhance contrast.

The recent development of in-situ liquid stages for (scanning) transmission electron microscopes now makes it possible for us to study the details of electrochemical processes under operando conditions. As electrochemical processes are complex, care must be taken to calibrate the system before any in-situ/operando observations. In addition, as the electron beam can cause effects that look similar to electrochemical processes at the electrolyte/electrode interface, an understanding of the role of the electron beam in modifying the operando observations must also be understood. In this paper we describe the design, assembly, and operation of an in-situ electrochemical cell, paying particular attention to the method for controlling and quantifying the experimental parameters. The use of this system is then demonstrated for the lithiation/delithiation of silicon nanowires.

A variety of specimens including bacteria, ciliates, choanoflagellates (Salpingoeca rosetta), zebrafish (Danio rerio) embryos, nematode worms (Caenorhabditis elegans), and leaves of white clover (Trifolium repens) plants were high pressure frozen, freeze-substituted, infiltrated with either Epon, Epon-Araldite, or LR White resins, and polymerized. Total processing time from freezing to blocks ready to section was about 6 h. For epoxy embedding the specimens were freeze-substituted in 1% osmium tetroxide plus 0.1% uranyl acetate in acetone. For embedding in LR White the freeze-substitution medium was 0.2% uranyl acetate in acetone. Rapid infiltration was achieved by centrifugation through increasing concentrations of resin followed by polymerization at 100°C for 1.5–2 h. The preservation of ultrastructure was comparable to standard freeze substitution and resin embedding methods that take days to complete. On-section immunolabeling results for actin and tubulin molecules were positive with very low background labeling. The LR White methods offer a safer, quicker, and less-expensive alternative to Lowicryl embedding of specimens processed for on-section immunolabeling without traditional aldehyde fixatives.

Since 1972, when the US Occupational Health and Safety Administration established the first limits on occupational exposure to asbestos fibers, numerous analytical methods employing several microscopy techniques have been developed to identify a group of minerals defined by legislation as asbestos. While transmission electron microscopy (TEM) is implemented in standardized analytical methods, these methods specify the use of selected area electron diffraction. Because of this constraint, the diffraction data a TEM can provide are often underutilized due to challenges associated with collecting and interpreting individual diffraction patterns. It has been shown that transmission electron backscatter diffraction (tEBSD) produces diffraction patterns nearly identical to electron backscatter diffraction, but from smaller crystal domains. This paper explores the utility of tEBSD for characterization of asbestiform particles from reference asbestos materials, a suite of amphibole minerals of varying morphologies to determine if there is a correlation between mineral habit (i.e., crystal form), microscopic particle shape preferred orientation, and mineral specimens from an industrial talc deposit to provide a case study of the utility and limitations of the technique.

The electron channeling contrast imaging technique was used to investigate the microstructure of copper coatings fabricated by cold gas dynamic spray. The high velocity impact characteristics for cold spray led to the formation of many substructures, such as high density dislocation walls, dislocation cells, deformation twins, and ultrafine equiaxed subgrains/grains. A schematic model is proposed to explain structure refinement of Cu during cold spray, where an emphasis is placed on the role of dislocation configurations and twinning.

Electron microscopy (EM), cryo-electron microscopy (cryo-EM), and cryo-electron tomography (cryo-ET) are essential techniques used for characterizing basic virus morphology and determining the three-dimensional structure of viruses. Enveloped viruses, which contain an outer lipoprotein coat, constitute the largest group of pathogenic viruses to humans. The purification of enveloped viruses from cell culture presents certain challenges. Specifically, the inclusion of host-membrane-derived vesicles, the complete destruction of the viruses, and the disruption of the internal architecture of individual virus particles. Here, we present a strategy for capturing enveloped viruses on affinity grids (AG) for use in both conventional EM and cryo-EM/ET applications. We examined the utility of AG for the selective capture of human immunodeficiency virus virus-like particles, influenza A, and measles virus. We applied nickel-nitrilotriacetic acid lipid layers in combination with molecular adaptors to selectively adhere the viruses to the AG surface. This further development of the AG method may prove essential for the gentle and selective purification of enveloped viruses directly onto EM grids for ultrastructural analyses.

From a biological point of view, casting refers to filling of anatomical and/or pathological spaces with extraneous material that reproduces a three-dimensional replica of the space. Casting may be accompanied by additional procedures such as corrosion, in which the soft tissue is digested out, leaving a clean cast, or the material may be mixed with radiopaque substances to allow x-ray photography or micro computed topography (µCT) scanning. Alternatively, clearing of the surrounding soft tissue increases transparency and allows visualization of the casted cavities. Combination of casting with tissue fixation allows anatomical dissection and didactic surgical procedures on the tissue. Casting materials fall into three categories namely, aqueous substances (India ink, Prussian blue ink), pliable materials (gelatins, latex, and silicone rubber), or hard materials (methyl methacrylates, polyurethanes, polyesters, and epoxy resins). Casting has proved invaluable in both teaching and research and many phenomenal biological processes have been discovered through casting. The choice of a particular material depends inter alia on the targeted use and the intended subsequent investigative procedures, such as dissection, microscopy, or µCT. The casting material needs to be pliable where anatomical and surgical manipulations are intended, and capillary-passable for ultrastructural investigations.

Solid oxide fuel cells (SOFCs) are promising candidates for use in alternative energy technologies. A full understanding of the reaction mechanisms in these dynamic material systems is required to optimize device performance and overcome present limitations. Here, we show that in situ transmission electron microscopy (TEM) can be used to study redox reactions and ionic conductivity in SOFCs in a gas environment at elevated temperature. We examine model ultrathin half and complete cells in two environmental TEMs using off-axis electron holography and electron energy-loss spectroscopy. Our results from the model cells provide insight into the essential phenomena that are important for the operation of commercial devices. Changes in the activities of dopant cations in the solid electrolyte are detected during oxygen anion conduction, demonstrating the key role of dopants in electrolyte architecture in SOFCs.

A model-based fitting algorithm for electron energy-loss spectroscopy spectra is introduced, along with an intuitive user-interface. As with Verbeeck & Van Aert, the measured spectrum, rather than the single scattering distribution, is fit over a wide range. An approximation is developed that allows for accurate modeling while maintaining linearity in the parameters that represent elemental composition. Also, a method is given for generating a model for the low-loss background that incorporates plural scattering. Operation of the user-interface is described to demonstrate the ease of use that allows even nonexpert users to quickly obtain elemental analysis results.

Hearts of mice with reduction of function mutation in STAT3 (SA/SA) develop fibrotic collagen foci and reduced systolic function with hypertension. This model was used to determine if fractal dimension and image analysis can provide a quantitative description of myocardial fibrosis using routinely prepared trichome-stained material. Collagen was characterized by relative density [integrated optical density/area (IOD/A)] and fractal dimension (D), an index of complexity. IOD/A of collagen in wild type mice increased with hypertension while D decreased, suggesting tighter collagen packing that could eventually stiffen the myocardium as in diastolic heart failure. Reduced STAT3 function caused modest collagen fibrosis with increased IOD/A and D, indicating more tightly packed, but more disorganized collagen than normotensive and hypertensive controls. Hypertension in SA/SA mice resulted in large regions where myocytes were lost and replaced by fibrotic collagen characterized by decreased density and increased disorder. This indicates that collagen associated with reparative fibrosis in SA/SA hearts experiencing hypertension was highly disorganized and more space filling. Loss of myocytes and their replacement by disordered collagen fibers may further weaken the myocardium leading to systolic heart failure. Our findings highlight the utility of image analysis in revealing importance of a cellular protein for normal and reparative extracellular matrix deposition.

Glyceraldehyde-3-phosphate dehydrogenase (GAPDH) has long been considered a classical glycolytic enzyme involved exclusively in cytosolic energy production. Several recent studies, however, have demonstrated that GAPDH is a multifunctional protein whose presence and activity can be regulated by disease states and/or experimental manipulation. Expression levels of GAPDH have been shown to be altered in certain tumors as well as in proliferating and differentiating cells. Since dedifferentiation and proliferation of smooth muscle cells (SMCs) are important features of human atherosclerosis, we have characterized the expression profile of GAPDH in the SMCs of atherosclerotic plaques and its putative interrelationship with the synthetic/proliferative status of these cells utilizing the proliferating cell nuclear antigen (PCNA) antibody, a valuable marker of cell proliferation. Western blot data revealed that GAPDH was significantly upregulated in atherosclerotic plaque specimens. Immunohistochemical stains demonstrated that GAPDH accumulated in the nucleus of dedifferentiated SMCs that also showed positive immunoreactivity for PCNA, but remained cytoplasmatic in the contractile SMCs (PCNA-negative), thus reflecting the proliferative, structural and synthetic differences between them. We suggest that, in human atherosclerotic plaque, GAPDH might exert additional functions that are independent of its well-documented glycolytic activity and might play key roles in development of the disease.

This paper investigates the adhesive interface in a polymer/metal (polyethylene terephthalate/steel) laminate that is subjected to uniaxial strain. Cross-sections perpendicular to such interfaces were created with a focused ion beam and imaged with scanning electron microscopy during straining in the electron microscope. During in situ straining, glide steps formed by the steel caused traction at the interface and initiated crazes in the polyethylene terephthalate (PET). These crazes readily propagated along the free surface of the PET layer. Similar crazing has not been previously encountered in laminates that were pre-strained or in numerical calculations. The impact of focused ion beam treatments on mechanical properties of the polymer/metal laminate system was therefore investigated. It was found that mechanical properties such as toughness of PET are dramatically influenced by focused ion beam etching. It was also found that this change in mechanical properties has a different effect on the pre-strained and in situ strained samples.

An electron energy-loss spectroscopic (EELS) study using a monochromator transmission electron microscope was conducted for investigating the dielectric response of isolated single-walled carbon nanotubes (SWCNTs) owing to interband transitions characteristic to chiral structures. Individual chiral structures of the SWCNTs were determined by electron diffraction patterns. EELS spectra obtained from isolated SWCNTs showed sharp peaks below π plasmon energy of 5 eV, which were attributed to the characteristic interband transitions of SWCNTs. In addition, unexpected shoulder structures were observed at the higher energy side of each sharp peak. Simulations of EELS spectra by using the continuum dielectric theory showed that an origin of the shoulder structures was because of the surface dipole mode along the circumference direction of the SWCNT. It was noticed that the electron excitation energies obtained by EELS were slightly higher than those of optical studies, which might be because of the inelastic scattering process with the momentum transfers. To interpret the discrepancy between the EELS and optical experiments, it is necessary to conduct more accurate simulation including the first principle calculation for the band structure of SWCNTs.

Transmission electron microscopy (TEM) images of beam sensitive weak-phase objects such as biological cryo samples usually show a very low signal-to-noise ratio. These samples have almost no amplitude contrast and instead structural information is mainly encoded in the phase contrast. To increase the sample contrast in the image, especially for low spatial frequencies, the use of phase plates for close to focus phase contrast enhancement in TEM has long been discussed. Electrostatic phase plates are favorable in particular, as their tunable potential will allow an optimal phase shift adjustment and higher resolution than film phase plates as they avoid additional scattering events in matter. Here we show the first realization of close to focus phase contrast images of actin filament cryo samples acquired using an electrostatic Zach phase plate. Both positive and negative phase contrast is shown, which is obtained by applying appropriate potentials to the phase plate. The dependence of phase contrast improvement on sample orientation with respect to the phase plate is demonstrated and single-sideband artifacts are discussed. Additionally, possibilities to reduce contamination and charging effects of the phase plate are shown.

Traditional electron microscopy techniques such as bright-field imaging provide poor contrast for organic films and identification of structures in amorphous material can be problematic, particularly in high-performance organic solar cells. By combining energy-filtered corrected transmission electron microscopy, together with electron energy loss and X-ray energy-dispersive hyperspectral imaging, we have imaged PTB7/PC61BM blended polymer optical photovoltaic films, and were able to identify domains ranging in size from several hundred nanometers to several nanometers in extent. This work verifies that microstructural domains exist in bulk heterojunctions in PTB7/PC61BM polymeric solar cells at multiple length scales and expands our understanding of optimal device performance providing insight for the design of even higher performance cells.

Combining the biological specificity of fluorescence microscopy with topographical features revealed by atomic force microscopy (AFM) provides new insights into cell biology. However, the lack of systematic alignment capabilities especially in scanning-tip AFM has limited the combined application approach as AFM drift leads to increasing image mismatch over time. We present an alignment correction method using the cantilever tip as a reference landmark. Since the precise tip position is known in both the fluorescence and AFM images, exact re-alignment becomes possible. We used beads to demonstrate the validity of the method in a complex artificial sample. We then extended this method to biological samples to depict membrane structures in fixed and living human fibroblasts. We were able to map nanoscale membrane structures, such as clathrin-coated pits, to their respective fluorescent spots. Reliable alignment between fluorescence signals and topographic structures opens possibilities to assess key biological processes at the cell surface such as endocytosis and exocytosis.