A substrate integrated waveguide (SIW) based self-quadruplexing antenna and its design approach in Ku-band (12–18 GHz) is presented in this paper. This consists of splitting of TE220 mode of square-shaped SIW cavity by incorporating the two diagonal arrays of metallic vias. Accordingly, four orthogonal dominant mode triangular shape SIW cavity (DMTC) resonators are formed. This methodology ensures enhanced isolation. To achieve the broadside radiation, the cavity structure is fed using microstrip lines and rectangular slots are loaded on the top layer of each DMTC. The length and position of each rectangular slot being chosen such that quad-resonances are achieved at 13, 13.5, 14.3, and 15 GHz for the respective DMTC. The equivalent circuit model of the proposed design is also developed, and the tuning of each frequency band is analyzed without affecting the others. The proposed antenna is producing high isolation (>28 dB) among all four ports and a unidirectional radiation pattern with a high front-to-back ratio (>26.8 dB).

A 2 × 2 dual band MIMO flexible antenna with a low profile and CPW feeding is designed for Internet of Things (IoT) domains, operating in 5G (3.3–3.6/4.8–5.0 GHz), WiMAX (5.25–5.85 GHz) and WLAN (5.15–5.35/5.725–5.825 GHz) bands. Two resonant frequencies are generated by L-shaped branches and a rectangular monopole. The mentioned MIMO antenna comprises four elements arranged vertically. With the addition of an orthogonal branch, significant isolation is attained, which exceeds 21 dB in the entire bands. The four-element MIMO antenna is fabricated and experimented to analyze the performance. According to the measurement, the antenna can operate bandwidth covering 3.156–3.84 GHz (19.55%) and 4.638–6.348 GHz (31.13%). Furthermore, the provided four-element MIMO antenna possesses a number of advantageous properties, such as ECC, DG, and TARC, indicating its suitability for 5G/WiMAX/WLAN applications. In accordance with the results of bending measurement and human body influence, it is evident that the presented liquid crystal polymer antenna could be an ideal candidate for integrating into wearable 5G/WiMAX/WLAN devices.

In this paper, a truncated patch antenna based on the electromagnetic band gap (EBG) structure has been proposed. The fabricated antenna has five operating frequencies at 10.4, 15.68, 19.68, 27.2, and 35.04 GHz. The fabricated prototype of the antenna constitutes a truncated rectangular patch etched with the shape of a symmetrical slot (on top) and an EBG loaded on the ground plane of the dielectric substrate. The optimized volume of the antenna is 20 × 15 × 1.57 mm3. The proposed antenna gives a good radiation pattern for the E-H field in all covered bandwidth and also achieved better performances related to the reference papers. A multiband antenna also covered the 5 G bandwidth, which resonates at 27.2 GHz from 24.2 GHz to 27.84 GHz bandwidth and at 35.04 GHz from 33.84 GHz to 36.2 GHz bandwidth, which can be used in the Internet of Medical Things. On the other hand, X/Ku/K frequency bands have been committed for wireless communication where the multiband antenna can be used to help in monitoring, especially in the case of data transmission from radio frequency sensors to health-care system in real-time applications.

In this paper, miniaturization of fractal geometry with defected ground structure (DGC) concept has been experimentally verified at S-band (2–4) GHz. The design starts with a self-symmetry structure using conventional Vicsek snowflake-box fractal antenna. The same has been used in third iteration to achieve miniaturization. This proposed microstrip patch antenna (MPA) is resonating at 2.12 GHz with acceptable gain and broadside radiation. The miniaturization of about 87.26% when compared to conventional fractal MPA is achieved. The fractal unit cell is optimized for miniaturization and bandwidth by carrying out parametric study and applying the DGS shapes like rectangular and U-shaped slot etched in the ground plane of Vicsek snowflake-box fractal microstrip antenna. A fractal microstrip antenna is designed for wireless applications at 3.95 GHz. The fractal microstrip antenna is simulated using HFSS-V15 simulator. It is observed that the maximum size reduction of 87.26% is achieved in the third iteration of the Vicsek snowflake-box fractal radiating patch. The proposed fractal patch antenna is designed and fabricated using epoxy substrate of FR-4 with dielectric constant of 4.4 and thickness of 1.6 mm. The simulated results are compared with the measured results.

Metamaterial lenses are appealing thin alternatives to conventional dielectric lenses. In this contribution we describe their design and application in two exemplary 77 GHz automotive radar sensors operating in monostatic and bistatic modes. The frontends are built around commercially available MMICs and small feed antennas are used in coordination with the six-layer printed circuit board-based realizations of metamaterial lenses. The design follows the principles of dielectric lenses, while the required local phase shift is obtained from a set of metasurface bandpasses. Their design uses a novel interpolation procedure to extract layout parameters for a given phase shift. Despite the small structural sizes due to the high frequency, the fabricated frequency-selective surfaces show very good performance in the required frequency range. Verification measurements were conducted on single bandpasses as well as on metamaterial lenses mounted on the radar frontend. The results agree very well with the simulation and confirm the applicability of thin lenses operating at mm-wave frequencies for automotive radar applications.

An 8 × 8 butler Vivaldi beam-steering antenna array is introduced for X-band application. Circularly polarized array is made of eight Vivaldi elements with 1×8 platform and an 8×8 beam feeding network. Vivaldi radiating element is used in array form to enhance impedance bandwidth and overall efficiency such as gain. Using microwave passive components, for instance, 3 dB branch line couplers and crossover help to have orthogonal modes for feeding each of the elements, hence circular polarization property is achieved. Extracted results show that the array has an impedance bandwidth over 7–12.7 GHz (~58%) for VSWR≤2 and an axial-ratio bandwidth of 3.15 GHz that is between 8.15 and 11.3 GHz (~33%). The peak gain of antenna array is 18 dBi at 10 GHz. The proposed beam-steering antenna with compact size and good operation is capable to cover an angle range from −42 to 55 degree in whole operation frequency.

In this paper, a frequency selective surface (FSS) based shared-aperture antenna is designed for 5G/Wi-Fi applications. The 5G and Wi-Fi channel are separated to achieve different polarizations and simultaneous work. The proposed antenna is of ±45°-polarization in the 5G N79 band and vertical polarization in the Wi-Fi5.8 GHz band. The antenna is vertically stacked with the N79 band antenna located above the Wi-Fi band antenna. The N79 antenna is composed of FSS units with transmissive characteristics in the Wi-Fi band, and serves as an electromagnetically transparent surface to avoid blocking the Wi-Fi antenna. A prototype of our design is fabricated, assembled and tested, and measured results show that the prototype is able to cover the entire N79 band (4.1–5.2 GHz, 23.7%) and Wi-Fi5.8 GHz band (5.73–5.89 GHz, 2.8%). Measured average gain is 8.2 and 7.8 dBi in the N79 and Wi-Fi band, respectively, and radiation efficiency is over 86 and 80%. The proposed design exhibits separated channels, tri-polarizations, high gain and compact size, which is sufficient for regular 5G/Wi-Fi applications. The antenna also achieves a relatively wide and highly consistent signal coverage in the two bands, making it suitable for 5G/Wi-Fi multi-function communication and indoor 5G blind compensation.

A dual-band dual-linearly polarized waveguide slot array antenna is proposed in this paper. Two orthogonal slots share a short-circuit wall on broad side. The horizontal and vertical slots, which actualize dual-frequency bands and dual-linear polarization, generate vertically polarized electric fields in 9.39–9.78 GHz and horizontally polarized electric fields in 11.62–12.3 GHz, respectively. The equivalent permittivity of the waveguide is changed by two grooves at the bottom of the waveguide, which improves phase velocity. Two grooves can also reduce the distance between the elements while suppressing the side lobes. Compared to filling the medium in the waveguide, two grooves have less losses. Moreover, the antenna is simple with one input port. The array antenna also overcomes the problems of beam scanning compared with the traditional waveguide slot array antenna. A 1 × 8 antenna array is fabricated and measured to verify the design. The horizontal polarization is formed in 9.39–9.78 GHz, the vertical polarization is generated in 11.62–12.3 GHz, and the antenna gain can reach 15 dBi.

In the design of the filter antenna, the filter unit with the same structure as the radiation patch not only improves the selectivity of the band edge, but also helps to improve the in-band impedance. In this design, a compact circular monopole filtering antenna with improved sideband selectivity and in-band impedance using a circular-stub-load resonator is proposed. To obtain better sideband selection characteristics and in-band impedance characteristics, and reduce the mismatch problem caused by the introduction of the filter, a branch-loaded filter with the same resonance mode as the antenna radiation patch is designed. In addition, different shape branch loading structures of the bandpass filter are also studied. The experimental results show that when the loading unit of the filter and the radiation structure of the antenna have the same structure, both good in-band impedance characteristics and sideband selectivity characteristics can be obtained from the filter antenna. The antenna reflection coefficient bandwidth is from 3 to 11 GHz (114%), and the maximum reflection coefficient is only −15 dB, showing good in-band impedance characteristics and sideband selection characteristics. The filter antenna realizes the integration of antenna filtering without increasing the size, and the final size of the antenna is 30 × 25 mm2.

In this work, a low profile ultra-wideband (UWB) antenna is designed and investigated using a novel loop-based wideband artificial magnetic conductor (WB-AMC) for gain enhancement. Initially, a compact loop antenna is designed using stub loading and further optimized for the UWB range by applying curve ground methodology. The average gain of the proposed antenna without WB-AMC is 2.7 dBi. To enhance the gain of the entire UWB range, loop-based WB-AMC in [2 × 2] forms is integrated. WB-AMC is used as a ground plane beneath the antenna. To validate the performance, the UWB antenna and WB-AMC are fabricated and tested. The measured results confirm the entire UWB range. Proposed antenna provides a peak gain of 9.4 dBi and an average gain of 5.8 dBi. Vertical profile reduction of 50% is achieved compared to perfect electric conductor ground. The proposed UWB antenna is a potential candidate for UWB wireless applications due to its attractive features such as low profile, wide bandwidth coverage, omnidirectional pattern, constant high gain, and group delay.

This paper distinguishes the design and analysis of 3 × 2 circular microstrip patch probe array for specific absorption rate (SAR) measurement at quad-band. This novel approach consists of FR4 substrate radial dimension of 88 mm and it has six circular array elements with a radius of 17 mm; out of these six elements, three array elements are having rectangular slots with dimensions of 1.8 × 1.5 × 1.5 mm3. The array elements are coupled with six probes which have a dimension of 100 mm with a 2.5 mm tip radius; these six probes are embedded into a tissue-equivalent liquid-filled human head mannequin. In this mannequin, instantaneous SAR at any six positions has been investigated. The proposed design resonates at 1.8, 2.1, 2.4, and 2.5 GHz with a return loss of −11.53, −15.90, −15.73, and −25.49 dB. The circular microstrip probe array is fed by a 50 Ohm coaxial feed. In addition, the 3D human head model analysis is also presented. The precisely estimated SAR values are 0.135, 0.108, 0.167, and 0.244 W/kg at 1 g of tissue. For the traceable measurements, each source of uncertainty budget has been estimated.

In this paper, a compact super wideband annular ring antenna using 45° clock-wise square patch inclusions for super high frequency and polarization diversity applications is proposed. The inclusions consist of a combination of squares and circles into one another in the inner area of a main annular ring radiator. The antenna uses a partial ground plane having a stair-type defected ground structure, is designed on an FR-4 substrate, and has a total size of 25 × 26 × 1.6 mm3 (0.17λ × 0.18λ). The design was fabricated and experimental results fairly agreed with simulations and resulted in an antenna with an operating frequency from 2.07 to 30 GHz; that is, a large fractional bandwidth of 174.2$\%$ with a bandwidth (BW) ratio of 14.5:1 and a high BW dimension ratio, BW per unit electrical length of 5693, and a measured peak gain of 8 dBi with an average gain of 5 dBi for the overall operating frequency. For the polarization diversity, a 4 × 4 multiple input-multiple output configuration is additionally presented, offering an effective isolation of ≥ 22.5 dB between ports and corroborated by measurements.

We report on the development of a handheld three-dimensional (3D) terahertz scanning system with an aspherical telecentric 3D-printed f-θ lens using selective laser sintering. The lens covers a broader scan line of 50 mm with its larger aperture, compared to the 20 mm range in our initial work, which was presented at the European Microwave Week 2021. In order to evaluate the adaptability of the optomechanical components with different sensor units, two different integrated frequency-modulated continuous wave radar modules based on monolithic microwave integrated circuit technology, operating in W- and D-bands are tested within the measurement scheme. The optomechanical part consists of a galvanometer scanner mirror and the f-θ lens. The optical system enables B-scans perpendicular to the manual translational movement of the sensor unit by its user. An integrated guiding wheel system with rotary encoder makes it possible to correlate the measurement points to their respective locations, enabling complete 3D volumetric inspection of the corresponding structures, which is particularly useful for the inspection along cracks and welds.

Main aim behind this study is to utilize 3D printing technique for designing and fabrication of a flexible wideband Vivaldi antenna for the upcoming 5 G systems. Frequency bands starting from 24 up to 65 GHz are receiving particular attention as they have potential for both high data rate communications and high-resolution radar applications. A Vivaldi antenna is used for its very wideband properties and planar design. The radiating structure covers a bandwidth of 25–65 GHz for a match better than −10 dB and demonstrates reasonably high gain and efficiency performance. The simulated radiation efficiency of the antenna remains above 90% for the entire bandwidth. Hence, the main advantage of this approach is that wideband or switched transceivers for future 5 G communications can be integrated using this concept without the need of complex matching networks.

A compact quasi-Yagi antenna with a modified ground plane is designed for a through-wall radar on-chip. A slot-based ground plane modification in the proposed antenna results in significant miniaturization with an increase in the impedance bandwidth by 44.62%. The antenna has a high directivity of 9.02 dBi and a front-to-back ratio of 25.76 dB at 2.4 GHz. Based on experiments in real-world deployment scenarios, the performance of the proposed quasi-Yagi antenna is found to be comparable to that of a Vivaldi antenna and a commercial-off-the-shelf horn antenna. Spectrogram-based signatures of a moving person behind a wooden partition and a 40 cm thick masonry wall are successfully obtained using the designed antenna, demonstrating the suitability of the quasi-Yagi antenna for portable applications using a radar-on-chip.

The novel compact size orthogonally fed 2 x 2 Multiple Input and Multiple Output (MIMO) array antenna for mid-band Fifth Generation (5G) wireless application is presented. The antenna configuration consists of diamond-shaped patches employed at the top of substrate. The V-shaped common ground slot structure is employed at the bottom of substrate. A broadband circular polarization is achieved by simply combining two circular polarization modes obtained from ground V slot and top patch feed structure. Mainly, the impedance bandwidth (IBW) and gain are enhanced by protruding slots on ground and cutting edges of patches. The measured result shows that 1.70 – 8.00 GHz (6.30 GHz) of IBW, 8.8 dBic of peak gain, and 3 dB axial ratio bandwidth from 1.81 – 3.87 GHz (2.06 GHz) are obtained. The proposed antenna performances are experimentally validated by fabricating and testing it for measured result analysis without using power divider.

This paper presents a multi-band rectangular slot antenna, which can be used in Beidou navigation system, 4G, WLAN and 5G system. The proposed antenna adopts a single feeding line, generating circular polarization for satellite navigation, and linear polarization for mobile communication systems. The proposed antenna consists of three c-type resonators and three rectangular loop slots. A c-type resonator and a rectangular loop slot work together to produce a usable frequency band. Multiple frequency bands can be generated by increasing the number of c-type resonator and rectangular loop slots. It is found that the c-type resonator changes the current distribution on the antenna surface, making the axial ratio less than 3 dB in the low frequency bands. Eventually, five operation frequency bands are realized. Experimentally, it is verified that the impedance bandwidths of each frequency band are 11.8% (1.12–1.26 GHz), 15.4% (1.5–1.75 GHz), 11.9% (2.36–2.66 GHz), 19.7% (3.15–3.84 GHz) and 2.6% (4.47–4.59 GHz), respectively. The measured 3 dB axial ratio bandwidths are 20 MHz at 1.2 and 1.56 GHz, fully covering BDS B1 and B2 bands. The measured gains are 3, 3.59, 4.07, 4.2 and 4.35 dBi, respectively.

An analytical and a numerical study on coupling in microstrip transmission line (MTL) are reported for different split-gap orientations of a single gap square-shaped split-ring resonator (SRR). Taking both magnetic and electric couplings and adopting Lagrangian formulation for this coupled system, mathematical relations are found for each orientation of SRR to determine the connection between coupling co-efficient and resonant mode frequency. It is shown that coupling results in higher resonance frequency when the SRR, with parallel split-gap, has the gap far from the MTL. But, a lower resonance frequency is obtained when the SRR is placed at shorter distances with parallel split-gap near to the MTL. Again, for perpendicular split-gap orientation of SRR, the resonant frequency is found in terms of an effective coupling co-efficient; at shorter distances it is found to be lower than the fundamental resonance frequency of uncoupled SRR and an opposite effect is obtained at longer distances. Using CST Microwave Studio, the resonance frequency for each split-gap orientation of SRR is also studied as a function of separation between MTL and SRR. It is observed that this phenomenon strongly depends on SRR side-length, substrate height, and separation between MTL and SRR.

The meta-surface is introduced into the design of band-notched monopole antennas with single/dual/triple notched bands around 3.6/5.5/7.2 GHz for ultra-wideband (UWB) communication. We show that strong coupling effects between the meta-surface and the antenna would be created through tuning the orientations of the meta-cells according to the field distributions on the antenna surface, and eventually, filter the unwanted radiations of the antenna. Especially, by simply attaching different meta-surfaces on the back of the antenna, the band-notched properties are shown to be changeable without hurting the original structure of the antenna. Both simulation and measurement results demonstrate the monopole with replaceable meta-surfaces has achieved an UWB operating band ranging from 3 to 9 GHz for voltage standing wave ratio (VSWR) ≤ 2 with single/dual/triple notched bands covering frequencies around 3.6/5.5/7.2 GHz. Such a design would obtain significant notched performances for the desired bands and maintain the good radiations in the operating frequency, which make it a suitable candidate for UWB applications.

A 1-bit reconfigurable intelligent metasurface-based antenna for 5G application is proposed. The proposed antenna based on artificial electromagnetic metamaterial has the advantages of easy processing and low cost. This meets the requirements of future communication network development. This antenna shows that the unit cell has a stable 180° phase difference between the ON and OFF states by loading a PIN diode at 6.425–7.125 GHz. A 10 × 10 array antenna is constructed by using 2 × 2 meta-atoms to reduce the complexity of the control network. This proposed antenna can achieve ±40° beam scanning with a gain tolerance of 3 dB and a maximum gain of 18.7 dBi. In addition, beamforming performance, such as multi-beams, is also achieved. These properties ensure that the proposed antenna has great potential in wireless communication systems and microwave imaging systems.