One of the most common harmful mites in edible fungi is Histiostoma feroniarum Dufour (Acaridida: Histiostomatidae), a fungivorous astigmatid mite that feeds on hyphae and fruiting bodies, thereby transmitting pathogens. This study examined the effects of seven constant temperatures and 10 types of mushrooms on the growth and development of H. feroniarum, as well as its host preference. Developmental time for the total immature stages was significantly affected by the type of mushroom species, ranging from 4.3 ± 0.4 days (reared on Pleurotus eryngii var. tuoliensis Mou at 28°C) to 17.1 ± 2.3 days (reared on Auricularia polytricha Sacc. at 19°C). The temperature was a major factor in the formation of facultative heteromorphic deutonymphs (hypopi). The mite entered the hypopus stage when the temperature dropped to 16°C or rose above 31°C. The growth and development of this mite were significantly influenced by the type of species and variety of mushrooms. Moreover, the fungivorous astigmatid mite preferred to feed on the ‘Wuxiang No. 1’ strain of Lentinula edodes (Berk.) Pegler and the ‘Gaowenxiu’ strain of P. pulmonarius (Fr.) Quél., with a shorter development period compared with that of feeding on other strains. These results therefore quantify the effect of host type and temperature on fungivorous astigmatid mite growth and development rates, and provide a reference for applying mushroom cultivar resistance to biological pest control.

Nickel mono-silicide has been considered a promising silicide candidate for sub-90 nm nodes of integrated circuits manufacturing. To form high-quality nickel mono-silicide as source/drain contact electrodes, a two-step low temperature rapid thermal process has been proposed, in which the as-deposited Ni will react with silicon during a low temperature (<310 °C) first anneal. Due to the lower annealing temperature Ni2Si will form after the first anneal. To better control the silicidation process the growth kinetics of Ni2Si thin film fabricated by solid-state reaction of sputtered Ni thin film on n+/p junction at low temperature is investigated in this paper. It is demonstrated that between 260 and 280 °C the thickness of Ni2Si thin film has a linear rather than parabolic dependence on annealing time. The corresponding activation energy for this linear growth is found to be ∼1.35 eV.

The diffusion barrier properties for ultrathin Ru/Ta and Ru/TaN bilayer structure as the copper diffusion barrier are compared. Cu, Ru, Ta and TaN thin films are deposited by using the ion beam sputtering technique. The experimental results show that the thermal stability of the Cu/Ru/Ta or TaN /Si structure is much more improved than that of the Cu/Ru/Si structure without the interlayer. However, the Cu/Ru/TaN/Si shows better thermal stability than the Cu/Ru/Ta/Si structure, which should be attributed to the amorphous nature of the TaN interlayer. The microstructure evolution of the Cu/Ru/Ta (TaN)/Si structure during annealing is discussed. The results show that the Ru/TaN bilayer can be a very promising diffusion barrier in the future seedless Cu interconnect technology.

The silicide formation for Ni/Pd and Pd/Ni bilayers on Si(100) substrates was investigated. X-ray diffraction and photoelectron spectroscopy (XPS) depth profiling have been applied to study the phase formation of the silicide. We found that with addition of Pd into Ni/Si, a uniform layer of ternary Ni1−xPdxSi layer formed and kept stable for a wide temperature range. The lattice parameter of Ni1−xPdxSi as a function of Pd addition was calculated. The nucleation temperature of NiSi2 was delayed due to the addition of Pd. The higher the Pd addition, the larger the increase in NiSi2 nucleation temperature. We also studied the effect on the addition of Ni to the Pd/Si reaction. For pure Pd/Si reaction PdSi nucleated from Pd2Si at 750°C or above. For Ni/Pd/Si reaction, Pd2Si changed to Ni1−xPdxSi at temperature lower than 750°C due to the incorporation of Ni. The phenomena were explained by classic nucleation theory taking into account the effect of mixing entropy effect.

A multilayer structure of Co/a-Si/Ti/Si(100) together with Co/Ti/Si(100) is applied to investigate the process and mechanism of CoSi2 epitaxial growth on a Si(100) substrate. The experimental results show that by adding an amorphous Si layer with a certain thickness, the epitaxial quality of CoSi2 is significantly improved. A multi-element amorphous layer is formed by a solid state amorphization reaction at the initial stage of the multilayer reaction. This layer acts as a diffusion barrier, which controls the atomic interdiffusion of Co and Si and limits the supply of Co atoms. It has a vital effect on the multilayer reaction kinetics, and the epitaxial growth of CoSi2 on Si. The kinetics of the CoSi2 growth process from multilayer reactions is investigated.

Ultra-thin epitaxial CoSi2 films formed by Co(3∼5nm)/Ti(1 nm)/Si(100) and Co(3∼5nm)/Si(lnm)/Ti(Inm)/Si are studied. The multilayers are deposited by ion-beam sputtering. Rapid thermal annealing (RTA) is used for silicidation. XRD, RBS, TEM, AFM, four-point probe, I-V and C-V measurements are carried out for characterization. The XRD spectra show the CoSi2 film formed by Co/Ti/Si or Co/Si/Ti/Si solid phase epitaxy has, epitaxial characteristic. XTEM shows that the film is continuous. RBS/Channeling shows that the formed CoSi2 has sharp interface with a minimum channeling yield of Co signal of 40%. AFM shows that the surface of ultra-thin CoSi2 film is smooth with a roughness of nearly 0.7 nm. The Rs∼T relationship shows that the CoSi2 films formed by Co/Si/Ti/Si reaction have the best thermal stability (stable up to 900°C). Those formed by Co/Ti/Si reaction are stable up to 850°C, while those formed by Co/Si reaction are only stable up to 750°C. By fitting the experimental I-V and C-V curves of the epitaxial CoSi2/Si Schottky diodes, barrier heights of around 0.6 eV and close to unity ideality factors are obtained.

Ballistic electron emission microscopy (BEEM) and deep level transient spectroscopy (DLTS) have been used to study the effects of substrate damage introduced by an ion-milling process in PtSi/n-Si Schottky contacts. Argon ions with well-defined energies of 300, 500, 700, 1000, 1500 eV were used to sputter n-type Si substrates in an ion beam sputtering system before metal deposition and silicide formation. Histograms of the PtSi/n-Si Schottky barrier height (SBH) measured by BEEM show that the mean SBH decreases with increasing ion energy, which can be explained as a result of donor-like defects that are introduced by the ion milling treatment. From DLTS measurements, we found direct evidence for the presence of such defects.