Little is known about the impact of modifiable risk factors on blood pressure (BP) trajectories and their associations with hypertension (HTN). We aimed to identify BP trajectories in normotensive Chinese adults and explore their influencing factors and associations with HTN. We used data from 3436 adults with at least four BP measurements between 1989 and 2018 in the China Health and Nutrition Survey, an ongoing cohort study. We measured BP using mercury sphygmomanometers with appropriate cuff sizes in all surveys. We used group-based trajectory modelling to identify BP trajectories between 1989 and 2009 and multiple logistic and Cox regression models to analyse their influencing factors and associations with HTN in 2011–2018. We identified five systolic blood pressure (SBP) trajectories, ‘Low-increasing (LI)’, ‘Low–stable (LS)’, ‘Moderate-increasing (MI)’, ‘High-stable (HS)’ and ‘Moderate-decreasing (MD)’, and four diastolic blood pressure (DBP) trajectories classified as ‘Low-increasing (LI)’, ‘Moderate–stable (MS)’, ‘Low-stable (LS)’ and ‘High-increasing (HI)’. People with higher physical activity (PA) levels and lower waist circumferences (WC) were less likely to be in the SBP LI, MI, HS and MD groups (P < 0·05). People with higher fruit and vegetable intakes, lower WCs and salt intakes and higher PA levels were less likely to be in the DBP LI, MS and HI groups (P < 0·05). Participants in the SBP HS group (hazard ratio (HR) 2·01) or the DBP LI, MS and HI groups (HR 1·38, 1·40, 1·71, respectively) had higher risks of HTN (P < 0·05). This study suggests that BP monitoring is necessary to prevent HTN in the Chinese population.

Limited literatures report the management of congenital left atrial appendage aneurysm (LAAA) which is extremely rare. Chest X-ray firstly showed an enlarged left cardiac silhouette for a 3-year-old patient with pneumonia. Echocardiography and magnetic resonance imaging confirmed a large cyst attached to the left atrium. Aneurysmectomy was performed through lateral thoracotomy using step-by-step method and under the guidance of transoesophageal echocardiography. We aim to show the safety and efficacy of this approach applied to children associated with congenital LAAA.

Studies have suggested an association between metabolic and cerebrocardiovascular diseases and major depressive disorder (MDD). However, the risk of metabolic and cerebrocardiovascular diseases in the unaffected siblings of patients with MDD remains uncertain. Using the Taiwan National Health Insurance Research Database, 22,438 unaffected siblings of patients with MDD and 89,752 age-/sex-matched controls were selected and followed up from 1996 to the end of 2011. Individuals who developed metabolic and cerebrocardiovascular diseases during the follow-up period were identified. Compared with the controls, the unaffected siblings of patients with MDD had a higher prevalence of metabolic diseases, such as hypertension (5.0% vs. 4.5%, p = 0.007), dyslipidemia (5.6% vs. 4.8%, p < 0.001), and obesity (1.7% vs. 1.5%, p = 0.028), and cerebrocardiovascular diseases, such as ischemic stroke (0.6% vs. 0.4%, p < 0.005) and ischemic heart disease (2.1% vs. 1.7%, p < 0.001). Logistic regression analyses revealed that the unaffected siblings of patients with MDD were more likely to develop hypertension, dyslipidemia, ischemic stroke, and ischemic heart diseases during the follow-up period than the controls. Our study revealed a familial coaggregation between MDD and metabolic and cerebrocardiovascular diseases. Additional studies are required to investigate the shared pathophysiology of MDD and metabolic and cerebrocardiovascular diseases.

Stem cells are an immortal cell population capable of self-renewal; they are essential for human development and ageing and are a major focus of research in regenerative medicine. Despite considerable progress in differentiation of stem cells in vitro, culture conditions require further optimization to maximize the potential for multicellular differentiation during expansion. The aim of this study was to develop a feeder-free, serum-free culture method for human embryonic stem cells (hESCs), to establish optimal conditions for hESC proliferation, and to determine the biological characteristics of the resulting hESCs. The H9 hESC line was cultured using a homemade serum-free, feeder-free culture system, and growth was observed. The expression of pluripotency proteins (OCT4, NANOG, SOX2, LIN28, SSEA-3, SSEA-4, TRA-1-60, and TRA-1-81) in hESCs was determined by immunofluorescence and western blotting. The mRNA expression levels of genes encoding nestin, brachyury and α-fetoprotein in differentiated H9 cells were determined by RT-PCR. The newly developed culture system resulted in classical hESC colonies that were round or elliptical in shape, with clear and neat boundaries. The expression of pluripotency proteins was increased, and the genes encoding nestin, brachyury, and α-fetoprotein were expressed in H9 cells, suggesting that the cells maintained in vitro differentiation capacity. Our culture system containing a unique set of components, with animal-derived substances, maintained the self-renewal potential and pluripotency of H9 cells for eight passages. Further optimization of this system may expand the clinical application of hESCs.

Single-walled carbon nanotube (SWNT) and conductive polymer composite were studied as a potential electrode candidate for plastic electronic devices such as organic light-emitting diodes (OLEDs) and solar cells. A novel conductive polymer, poly(2,7–9,9(di(oxy-2,5,8-trioxadecane))fluorene) (PFO), was synthesized and characterized as a surfactant to disperse SWNTs in solutions. The ethylene oxide (EO) side chain of rigid PFO backbone acts as a template to wrap around SWNTs in solution. Up to 0.02% (by weight) of SWNTs are stabilized and well separated in the solution phase. The carbon nanotube can be dispersed in solutions for over 4 mo. Transmission electron microscopy (TEM) images of solvent cast film suggest highly uniformed SWNT distribution incorporated in the conductive polymer matrix. Transmittance characterization shows the film is as transparent as indium tin oxide conducting glass. Conductivity measurement shows SWNTs can effectively inject charges into the PFO polymer matrix at low voltage. The current versus voltage profile of the SWNT/PFO composite film (2% SWNT in PFO by weight) shows that the majority current conducting is carried by SWNTs.

The effect of erosion speed on the interaction between erosion and corrosion of the Fe–3.5 wt% B alloy in a flowing zinc bath has been investigated using a rotating-disk technique. The total erosion–corrosion rate increases rapidly, whereas the pure erosion rate tends to increase linearly with an increase in erosion speed and with low damage. The increase in total erosion–corrosion rate is strongly dependent on erosion–corrosion interaction. During the erosion–corrosion process, the severe corrosion reaction roughens the surface by forming a loose corrosion layer and cracks in the anticaustic Fe2B skeleton, which eventually facilitates erosion. The micromechanical scouring effect of liquid zinc worsens corrosion by accelerating the removal of corrosion products and causing spallation of anticaustic Fe2B. An increase in erosion speed intensifies the micromechanical scouring effect of flowing zinc significantly. A strong erosion–corrosion interaction occurs at high erosion speed, which leads to a greater material loss rate.

The unique properties of silicon oxide materials, no matter intrinsic or doped, utilized in thin film solar cells (TFSCs) in the area of photovoltaic (PV) are making TFSCs one of the most attractive photovoltaic technologies for the development of high-performing electricity production units to be integrated in everyday life. In comparison to other silicon materials, the particular diphasic structure of silicon oxide materials, in which hydrogenated microcrystalline silicon (μc-Si:H) crystallites are surrounded by an oxygen-rich hydrogenated amorphous silicon (a-Si:H) phase, causes them present excellent photoelectrical material properties, such as a low-parasitic absorption in the broadband spectral range, independent controllability of longitudinal and lateral conductivity, refractive indices (3.5-2.0), band gap (2.0-2.6 eV) and conductivity tenability (with orders of 1-10-9 S/cm) with oxygen doping, and so on. Various types of silicon oxide materials, including intrinsic, p- or n- type, further applied in TFSCs have also played significant roles in improving the efficiency of various types of single-, dual-, and triple-junction thin-film solar cells from both the optical and electrical points of view. In this paper, we present our latest progress in studying the performance improvement role of intrinsic or doped silicon oxide materials in pin-type a-Si:H, a-SiGe:H, and μc-Si:H single-junction solar cells. By effectively tuning the band gap values of intrinsic a-SiOx:H materials with oxygen doping and adopting the layers with a suitable band gap (1.86 eV) as the P/I buffer layers of a-Si:H solar cells fabricated on metal organic chemical vapor deposition (MOCVD) boron-doped zinc oxide (ZnO:B) substrates, a significant Voc increases up to 909 mV and an excellent external quantum efficiency (EQE) response of 75% at the 400 nm typical wavelength can be achieved by matching the band gap discontinuity between the p-type nc-SiOx:H window and a-Si:H intrinsic layers. The serious leakage current characteristics of pin-type narrow-gap (Eg<1.5 eV) a-SiGe:H single-junction solar cells can also be finely tuned by integrating an n-type μc-SiOx:H layer with a small oxygen content in addition to improving the long-wavelength response, an effective approach gives rise to the highest FF of 70.62% for pin-type a-SiGe:H single-junction solar cells with an average band gap of 1.48 eV. In addition, our studies proved that the application of p-type μc-SiOx:H window layers in μc-Si:H single-junction solar cells can effectively improve the short-wavelength light coupling by suppressing the parasitic absorption and promoting the anti-reflectivity with a graded refractive index profile. On the basis of the optimum single-junction solar cells with omnipotent silicon oxide materials, an initial efficiency of 16.07% has been achieved for pin-type a-Si:H/a-SiGe:H/μc-Si:H triple-junction solar cells with an active area of 0.25 cm2. The omnipotent properties of silicon oxide layers in TFSCs, including effective optical coupling and trapping, suitability in compensating for the band gap discontinuity, the shunt-quenching capacity, and so on, make them likely to be extended to other types of solar cells such as polycrystalline chalcopyrite Cu(In,Ga)Se2 (CIGS) and perovskite-sensitized solar cells, opening up new opportunities for acquiring solar cells with higher performance.

This study was to analyze the microstructure, microhardness, tensile and fatigue performance of the welded joints performed by a fiber laser on 22MnB5 and dual-phase steels (DP590, DP980) in similar and dissimilar combinations. The result shows that the weld zone (WZ) basically consisted of lath martensite. The HAZ in these steels can be divided into 3 parts: quenched, incomplete quenched, and tempered region. The WZ had the highest hardness, and a soft zone existed in the HAZ of all steels. Inside the WZ of the dissimilar welded joints, two hardness subregions were observed due to the difference in the alloying elements of these steels. Tensile specimens of the 22MnB5–22MnB5 and 22MnB5–DP980 welded joints were all broken in HAZ, while the 22MnB5–DP590 welded joints failed in the DP590 base metal (BM). The BM had a higher fatigue life than the welded joints, and the fatigue failure of the 22MnB5 similar and 22MnB5–DP980 dissimilar welded joints respectively occurred in the HAZ and DP980 BM. The fatigue fracture contained 3 parts: crack initiation, crack propagation, and the final fast fracture region.

Background: The genetic region coding for low-density lipoprotein receptor-related protein1 (LRP1) is considered an intriguing susceptibility locus for Alzheimer's disease (AD). Amnestic mild cognitive impairment (aMCI) is characterized by episodic memory impairment and represents the prodromal stage of AD. Our aim in this study is to investigate the relationship between LRP1 genetic variation and aMCI, and the influence of LRP1 on cognitive performance.

Methods: We performed a case-control association study analyzing five polymorphisms in LRP1 gene by TaqMan Assays-on-Demand SNP Genotyping. All samples were derived from Chinese subjects (109 cases, 104 healthy controls) and assessed using multi-dimension neuropsychological instruments.

Results: We identified haplotypes within the region containing the LRP1 gene. Of these, haplotype TAA (T: rs1800194; A: rs11837145; A: rs10876967) was significantly associated with aMCI, being over-represented in aMCI versus healthy controls. Haplotype TAA was associated with poor performance on episodic memory in all subjects.

Conclusions: This study confirms the association between genetic variants in LRP1 and aMCI. Moreover, we have identified a relationship between LRP1 genetic variation and specific aspects of neurocognitive function. Our convergent results suggest that LRP1 plays an important role in cognitive function and possibly in the pathogenesis of aMCI.

Carrot-like defects in a 7 off-cut (from [0001] toward <1-210> direction) 4H-SiC wafer with a 36μm thick 4H-SiC epilayer have been investigated using Nomarski optical microscopy, synchrotron white beam x-ray topography (SWBXT), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). X-ray topographs confirm that threading screw dislocations are often associated with the carrots. Cross-sectional TEM observation confirms that a prismatic stacking fault exists below the carrot. This fault was found to show contrast in all observed diffraction geometries except for g=0004. A model for the mechanism of formation of this type of defect during epitaxial growth is proposed.