An optimization model is developed in this paper for the joint trajectories of a hopping robot with a four-bar linkage leg. The dynamic behaviour of the one-legged robot is investigated during the stance and swing phases, and their impacts on gait planning are analysed. Certain constraints characterizing the continuous and cyclic motion of the robot are obtained. The optimization model is solved for the minimum torque and maximum velocity objective functions separately, and the results are compared with those in nature.

The paper addresses the problem of speed adaptation of movements subject to environmental constraints. Our approach relies on a novel formulation of velocity profiles as an extension of dynamic movement primitives (DMP). The framework allows for compact representation of non-uniformly accelerated motion as well as simple modulation of the movement parameters. In the paper, we evaluate two model free methods by which optimal parameters can be obtained: iterative learning control (ILC) and policy search based reinforcement learning (RL). The applicability of each method is discussed and evaluated on two distinct cases, which are hard to model using standard techniques. The first deals with hard contacts with the environment while the second process involves liquid dynamics. We find ILC to be very efficient in cases where task parameters can be easily described with an error function. On the other hand, RL has stronger convergence properties and can therefore provide a solution in the general case.

Particle swarm optimization (PSO) is a heuristic optimization algorithm and is commonly used for the tuning of PD/PID-type controllers. In this paper, PSO is applied for control gain tuning of a position domain PID controller in order to improve contour tracking performances of linear and nonlinear contours for a serial multi-DOF robotic manipulator. A new fitness function is proposed for gain tuning based on the statistics of the contour error, and pre-existed fitness functions are also applied for the optimization process, followed by some comparison studies. The PSO tuning technique demonstrated the same effectiveness in position domain controllers as in time domain controllers with the results being quite satisfying with low contour errors for both linear and nonlinear contours, and the proposed fitness function is proved to be on par with the pre-existed fitness functions.

This paper proposes a new kinematic controller for the waypoints guidance of robotic mobile platforms. A notable feature of the controller is its ability to process the raw sequence of waypoints to produce smooth reference velocities from control laws that are derived by taking into account a driving profile including the velocity limits, the acceleration limits, the motion modes through each waypoint (forward or backward) and the precision constraints that are required to ensure accurate waypoints traversal. A mathematical analysis demonstrates the convergence of the movements through the waypoints sequence. In addition, we present a simple way to adapt the driving profile in order that the platform reaches the last waypoint at a prescribed time. A feed-forward unit is finally described, that compensates for delays and first-order poles in the velocity response of the platform. Various simulations and experiments on real robotic platforms demonstrate the behavior and the effectiveness of the solution.

Exoskeleton robots, which can be worn on human limbs to improve or to rehabilitate their function, are currently of great importance. When these robots are used in rehabilitation, one aspect that must be fulfilled is their capacity to adapt to different patients without significantly varying their performance. This paper describes the application of a relatively new control technique called virtual decomposition control (VDC) to a seven degrees-of-freedom (DOF) exoskeleton robot arm, named ETS-MARSE. The VDC approach mainly involves decomposing complex systems into subsystems, and using the resulting simpler dynamics to conduct control computation, while strictly ensuring global stability and having the subsystem dynamics interactions rigorously managed and maintained by means of virtual power flow. This approach is used to deal with different masses, joint stiffness and biomechanical variations of diverse subjects, allowing the control technique to naturally adapt to the variances involved and to maintain a successful control task. The results obtained in real time on a 7DOF exoskeleton robot arm show the effectiveness of the approach.

Characters encountered in daily environments provide valuable information to human beings and potentially to automated machines. This paper describes the use of character information by robots working in daily environments. Our robot system finds and reads character strings by virtue of a recognition module that detects character candidates as closed contours in an image. The closed-contour-based method enables detection of various character strings observed from different viewpoints. To cope with tiny and distant characters, the image processing is collaborated with a camera system having a mechanical gaze adjustment. By combining the detection result with an optical character reader, the autonomous robot can provide daily assistance to humans.

In this paper, we present a novel stochastic framework for network-based bilateral teleoperation systems. A Bayesian approach, which provides robust tracking performance in real-world applications, is proposed to estimate and predict the stochastic variables and compensate for the unreliable network conditions. Combining with a practical approach in transport and application layers of the Internet, this paper demonstrates a high performance and efficient prediction and estimation method for bilateral teleoperation system. Experimental results show that the proposed Bayesian approach estimates and predicts true position and force data over unreliable network conditions, and therefore, improves the performance of overall teleoperation systems.

This paper presents a new configuration for ankle rehabilitation using a 9-DOF (degree of freedom) hybrid parallel robot. The robot contains nine linear actuators serially connecting two movable platforms and one stationary platform. The optimization is based on the singularity and dynamic analysis of the robot. The obtained data of the ankle motions from a series of experiments were applied to the model in order to investigate the motion of the end-effector and the force required for each actuator in a particular path. The end-effector tracking simulation results validated the proposed theoretical analysis of the required rehabilitation path of the foot.

A robot working in a hostile environment should be equipped with the necessary risk-avoidance intelligence to survive and accomplish an assigned mission. Covert robotics is a relatively new field in which covert navigation abilities are developed for robots to carry out a mission with minimal potential observation from known or unknown vantage points, with occluding obstacles as the only means of maintaining covertness. The ability to ‘hide’ in order to minimize the risk of being detected is the focus of this paper. A number of strategies are presented that deal with various assumptions about the environment and the hostile observers' locations. The hiding strategies presented for different cases ensure choosing a proper hiding point while taking into account the risk of the chosen path to it.

An iterative algorithm to minimize energy loss in kinematic chains is proposed. This algorithm is designed to low level of control where variables such as terminal states, runtime, and physical and electrical parameters of the movement are given by higher levels of control. An original complex problem of optimization is transformed into a simple quadratic programming problem subject to linear constraints by discretizing all dynamic system variables. The whole system is then converted into a recursive matrix equation that is solved iteratively. A proof of convergence is suggested. The performance of the algorithm is illustrated by using it in the motion planning of a quadruped robot.

In this paper the control of flexible-joint manipulators while explicitly avoiding actuator saturation is considered. The controllers investigated are composed of a bounded proportional control term and a Hammerstein strictly positive real angular rate control term. This control structure ensures that the total torque demanded of each actuator is bounded by a value that is less than the maximum torque that each actuator is able to provide, thereby disallowing actuator saturation. The proposed controllers are shown to render the closed-loop system asymptotically stable, even in the presence of modeling uncertainties. The performance of the controllers is demonstrated experimentally and in simulation.

Reliable assessment of terrain traversability using multi-sensory input is a key issue for driving automation, particularly when the domain is unstructured or semi-structured, as in natural environments. In this paper, LIDAR-stereo combination is proposed to detect traversable ground in outdoor applications. The system integrates two self-learning classifiers, one based on LIDAR data and one based on stereo data, to detect the broad class of drivable ground. Each single-sensor classifier features two main stages: an adaptive training stage and a classification stage. During the training stage, the classifier automatically learns to associate geometric appearance of 3D data with class labels. Then, it makes predictions based on past observations. The output obtained from the single-sensor classifiers are statistically combined in order to exploit their individual strengths and reach an overall better performance than could be achieved by using each of them separately. Experimental results, obtained with a test bed platform operating in rural environments, are presented to validate and assess the performance of this approach, showing its effectiveness and potential applicability to autonomous navigation in outdoor contexts.

This paper proposes an alternative environment mapping method for accurate robotic navigation based on 3D information. Typical techniques for 3D mapping using occupancy grid require intensive computational workloads in order to both build and store the map. This work introduces an Occupancy-Elevation Grid (OEG) mapping technique, which is a discrete mapping approach where each cell represents the occupancy probability, the height of the terrain and its variance. This representation allows a mobile robot to know with an accurate degree of certainty whether a place in the environment is occupied by an obstacle and the height of such obstacle. Thus, based on its hardware characteristics, it can make calculations to decide if it is possible to traverse that specific place. In general, the map representation introduced can be used in conjunction with any kind of distance sensor. In this work, we use laser range data and stereo system data with a probabilistic treatment. The resulting maps allow the execution of tasks as decision making for autonomous navigation, exploration, localization and path planning, considering the existence and the height of the obstacles. Experiments carried out with real data demonstrate that the proposed approach yields useful maps for autonomous navigation.

A centipede-like robot, which has high degrees of freedom (DOFs) and similar body segments, requires new real-time control to achieve diverse gaits. Therefore, we have studied the movement characteristics of multi-legged creatures and determined the features for a gait periodic relay. An instruction-relay control scheme, the three-bus control system and the required software were then designed. In our experiments with the designed control system, different gaits for the robot could be achieved, and the phase difference between body segments could be changed by altering the delay time. As a whole, this control system could accomplish the required control task and reasonably simplify the gait control algorithms and procedures.

Nowadays, with the growing use of atomic force microscope (AFM) nanorobots in the fabrication of nanostructures, research in this area has proliferated. A major limiting factor in the utilization of AFM nanorobots is the lack of real-time monitoring. Computer simulations have been widely used to improve the feasibility of nanoparticles pushing by means of the AFM-based nanorobots. In order to prevent damage to a cantilever during the nanoparticle displacement, it is necessary to come up with an algorithm that can check the feasibility of the manipulation operation with regards to the geometrical constraints of the cantilever and the considered path. The existing models for predicting the feasibility of manipulation processes are limited to 2D manipulation models (spherical nanoparticles), which are incapable of predicting the feasibility of 3D operations (lack of a comprehensive model of 3D cases). In this paper, to predict the feasibility of displacing cylindrical nanoparticles and to consider the path of motion (rough surface), a model has been proposed that can ensure the feasibility of the manipulation operation in advance. Finite element simulation has been employed to obtain the maximum load that can be withstood by a cantilever of a specific geometry. Also, the effect of surface roughness on the critical manipulation force has been explored. Ultimately, an algorithm has been presented for determining the feasibility of the manipulation operation by considering the particle motion path and the cantilever geometry.

This paper proposes a solution to the sampled-data regulation problem for feedback linearizable n-link robotic manipulators. The prime focus is on the development and stability analysis of the proposed control scheme in the presence of model uncertainties and external disturbances. A major constraint is the availability of sampled measurements of output signal. This leads to designing an impulsive observer for feedback linearization. The discrete-time control input is mapped into its continuous-time counterpart using a realizable reconstruction filter (RRF). The underlying control scheme relies on the sampled-data regulator theory based on the discrete-time equivalence of the plant and RRF modeled as impulsive system. This method leads to controller/observer design in discrete time. The working of the entire scheme is dependent on the stability of impulsive observer; hence a Lyapunov-based stability analysis is also included to ensure the stability of a closed-loop system. The working of the proposed scheme along with a comparison with conventional solution is presented, when applied to the control of a 3-degree-of-freedom PUMA 560 robot.

In this paper, a robust adaptive fuzzy controller is proposed to improve the robustness and position tracking of a MEMS gyroscope sensor. The proposed controller is designed as an indirect adaptive fuzzy controller with a supervisory compensator. It incorporates a fuzzy inference system with an adaptive controller in a unified Lyapunov framework, which can approximate and compensate for the unknown system dynamics and nonlinearities in the MEMS gyroscope. The parameters of the membership functions in the fuzzy controller can be adjusted online based on the Lyapunov method. Moreover, a supervisory controller is employed to guarantee the asymptotic stability of the closed-loop system and boundedness of the state variables in the MEMS gyroscope model. Numerical simulations demonstrate the proposed robust adaptive fuzzy controller has satisfactory tracking performance and robustness in the presence of external disturbances.

A method for motion/force control of robot arms with model uncertainties is presented. Tracking control of complex trajectories is guaranteed using a Lyapunov approach with high-precision performance ensured using a particle swarm optimization (PSO) algorithm. Tracking performance and robustness are simulated for a robotic device for limb rehabilitation that is designed to be adapted easily to different subjects by considering model parameter uncertainties. Controller parameters are optimized offline using the PSO algorithm with Lyapunov stability conditions considered as inequality constraints. Using the control scheme, the robot can guide limbs on smooth and non-smooth trajectories, under model uncertainties and measurement noise.

This paper proposed a new approach for the joint friction estimation of non-slipping walking biped robots. The proposed approach is based on the combination of a measurement-based strategy and a model-based method. The former is used to estimate the joint friction online when the foot is in contact with the ground, while the latter adopts a friction model to represent the joint friction when the leg is swinging. The measurement-based strategy utilizes the measured ground reaction forces (GRF) and the readings of an inertial measurement unit (IMU) located at the robot body. Based on these measurements, the joint angular accelerations and the body attitude and velocity are estimated. The aforementioned measurements and estimates are used in a reduced dynamical model of the biped. However, when the leg is swinging, this strategy is inapplicable. Therefore, a friction model is adopted. Its parameters are identified adaptively using the estimated online friction whenever the foot is in contact. The estimated joint friction is used in the feedback torque control signal. The proposed approach is validated using the full-dynamics of 12-DOF biped model. By using this approach, the robot center of mass (CoM) position error is reduced by 10% which demonstrates the effectiveness of this approach.

In this paper, a novel scheme is presented to conquer the motion-planning problem for autonomous space robots. Minimizing the consumed energy of atomic batteries within the daily planetary missions of robot on the planet is taken into account, i.e., utilization of the generated solar power by its embedded photocells leads to saving energy of batteries for night missions. Aforementioned objective could be acquired by appropriate interaction of motion planning paradigm with shadows of obstacles. Modeling of the shadow with the proposed artificial potential field leads to generalize the concept of potential fields not only for static and dynamic obstacles but also for being confronted with the intrinsic time-variant phenomena such as shadows. With due attention to the noticeable computational complexity of the introduced strategy, fuzzy techniques are applied to optimize the sampling times effectively. To accomplish this objective, a smart control scheme based on the fuzzy logic is mounted to the primitive version of algorithm. Regarding the need to identify some structural parameters of obstacles, PIONEER™ mobile robot is designed as a test bed for the verification of simulated results. Investigation on empirical accomplishments shows that the goal-oriented definition of Time–Variant Artificial Potential Fields is able to resolve the motion-planning problem in planetary applications.