In this paper, equilibrium optimization algorithm (EOA), which is a novel optimization algorithm, is applied to synthesize symmetrical linear antenna array and non-uniform circular antenna array (CAA). The main purpose of antenna array synthesis is to achieve a radiation pattern with low maximum side lobe level (MSL) and narrow half-power beam width (HPBW) in far-field. The low MSL here is an important parameter to reduce interference from other communication systems operating in the same frequency band. A narrow HPBW is needed to achieve high directionality in antenna radiation patterns. Entering the literature as a novel optimization technique, EOA optimally determined the amplitude and position values of the array elements to obtain a radiation pattern with a low MSL and narrow HPBW. The EOA is inspired by models of the control volume mass balance used to predict equilibrium as well as dynamic states. To demonstrate the flexibility and performance of the proposed algorithm, 10-element, 16-element and 24-element linear arrays and eight-element, 10-element and 12-element CAAs are synthesized. The MSL and HPBW values of radiation pattern obtained with the EOA are very successful compared to the results of other optimization methods in the literature.

A dual-band stacked antenna integrated with a rescue helmet is proposed for WLAN applications. The cross slot aperture feeding technique enables the antenna to support dual-band operation at 2.4 and 5 GHz. On the ground plane, two slots are formed, perpendicular to each other and of different lengths. Four dielectric layers of different permittivity are stacked over this cross slot to attain the desired frequency bands. Under free space condition, the radiator yields 7% (2.31–2.48 GHz), 15.87% (5.12–6 GHz) 10 dB return loss bandwidth (BW). The use of low loss dielectric layers on the slots also provides a high antenna efficiency and moderate gain at both frequency bands. The small dimension of antenna encourages its use as a wearable helmet antenna. Antenna performances are observed under wearable condition. For assessing human exposure to RF electromagnetic fields, SAR evaluations are conducted at both 2.4 and 5 GHz WLAN bands.

Proposed is a wideband, low profile, fully flexible, and all-textile-based slotted triangular antenna loaded with a 2 × 2 textile-inspired artificial magnetic conductor to be worn on the wrist. The integrated antenna design is designed to cover the frequency band from 3.1 to 6.5 GHz. The integrated design has two main resonances, where the first one is at 3.5 GHz, which can serve the WiMAX communication standard, while the second is at 5.8 GHz, which can serve the Industrial, Scientific and Medical (ISM)-band. The incorporated textile materials are composed of the conductive and dielectric fabrics that are realized by ShieldIt and Felt, respectively. When simulated against the human model wrist, the integrated antenna design displayed a realized gain of 6.71 dBi and radiation efficiency of 79.1%, at 3.5 GHz. Furthermore, at 5.8 GHz, it displayed a realized gain of 7.82 dBi and total efficiency performances of 66.1%. Moreover, it accomplished very low SAR levels within the antenna frequency band. Averaged over 1 g of tissue, it exhibited maximum SAR levels of 3.28 × 10−6 and 9.37 × 10−7 W/kg at 3.5 and 5.8 GHz, respectively. For the bent scenarios, the integrated antenna design displayed robustness when bent at an angle of 20 and 40°. Finally, measurement results are illustrated and analyzed. Based on the presented results, the suggested all-textile integrated antenna design might be designated for integration with the wristband to monitor the user health conditions through many possible frequency channels.

A superstrate loaded cylindrical dielectric resonator antenna is developed and demonstrated for dual-band circular polarization. The proposed antenna employs a microstrip-fed rotated cross-shaped slot coupling technique for exciting the dielectric resonator (DR). The design is developed in a straight forward way. Firstly, the DR is coupled with a conventional plus-shaped slot and operates in linear polarization mode at 7.4 and 11.2 GHz. Secondly, the slot is rotated by 10° to enable out-of-phase excitation and ensure circular polarization at the above-mentioned frequencies. In the third step, a square dielectric superstrate is placed above the DR which creates multiple reflection and enhance the gain up to ~8 dBi in both the frequencies without affecting other performances. The development stages are discussed in detail. The proposed design is demonstrated through prototype fabrication and characterization. This antenna can be used for X-band satellite communications.

A compact antenna module with a single band notch at wireless local area network (WLAN) (5.725–5.825 GHz) for ultra-wideband (UWB) multiple input multiple output (MIMO) applications is proposed. Proposed antenna which acquires size of 0.299 λ × 0.413 λ × 0.005 λ mm3 at 3.1 GHz consists of two symmetrical radiators placed side by side on global merchandise link (GML) 1000 substrate (εr = 3.2, tan δ = 0.004). Isolation between the antenna elements is >18 dB in the whole UWB band, which is achieved by introducing the vertical stub and H-slot between the monopole radiators in the ground plane. The simulated and measured results of the antenna system are in good agreement. The proposed antenna covers entire UWB with impedance bandwidth (|S11| < −15 dB) from 3.1 to 11 GHz except at WLAN notched band. The designed antenna module bears low envelope correlation coefficient and minimal multiplexing efficiency hence fulfilling criteria suitable for various wireless MIMO applications.