In this work, a liquid crystal based tunable composite right/left-handed transmission line for future leaky wave antennas working at the Ka-band is presented. The tuning of the liquid crystal is achieved by means of magnetic and electric biasing. For this purpose, different prototypes are fabricated for each biasing technique and their dispersive characteristics compared. Electric tunability is achieved by implementing highly resistive bias lines in the unit cell layout. Both techniques yield similar tuning capabilities at the operation frequency of 27GHz whereas the electric one has the advantage of being easily integratable in the layout.

In the present work, a novel multistrip monopole antenna fed by a cross-shaped stripline comprising one vertical and two horizontal strips has been proposed for wireless local area network (WLAN)/Industrial, Scientific, and Medical band (ISM)/International Mobile Telecommunication (IMT)/BLUETOOTH/Worldwide Interoperability for Microwave Access (WiMAX) applications. The designed antenna has a small overall size of 20 × 30 mm2. The goal of this paper is to use defected ground structure (DGS) in the proposed antenna design to achieve dual-band operation with appreciable impedance bandwidth at the two operating modes satisfying several communication standards simultaneously. The antenna was simulated using Computer Simulation Technology Microwave Studio (CST MWS) V9 based on the finite integration technique (FIT) with perfect boundary approximation. Finally, the proposed antenna was fabricated and some performance parameters were measured to validate against simulation results. The design procedure, parametric analysis, simulation results along with measurements for this multistrip monopole antenna using DGS operating simultaneously at WLAN (2.4/5.8 GHz), IMT (2.35 GHz), BLUETOOTH (2.45 GHz), and WiMAX (5.5 GHz) are presented.

In this paper, a new configuration of dual-band, dual-polarized microstrip antenna applicable to mobile base stations is proposed. The concept behind the new design is the use of an artificial magnetic conductor (AMC) structure that operates in the required two bands beneath a radiating diamond shaped slot. The choice of the diamond-shaped slot is due to its support of an infinite number of resonant modes where the dimensions of the diamond shape have more degree of freedom that controls the excited modes when compared to the rectangular slot. The proposed antenna works over the 870–960 MHz (GSM850/GSM900) band and the 1710–2170 MHz (DCS1800/PCS1900/UMTS2100) bands for mobile communication systems. The antenna is suitable for transmitting and receiving mobile signals since it has two ports of orthogonal polarization. The antenna is fabricated on a combination of FR4 dielectric substrate and foam layers in order to achieve low cost. The proposed antenna yields high isolation between its two ports not exceeding −30 dB and a front-to-back ratio exceeding 15 dB. The average antenna gains are about 6.6 dBi at the GSM850/GSM900, 7.1 dBi at the DCS1800/PCS1900, and 6.8 dBi at the UMTS2100 bands. The theory of radiation is proved analytically and verified by comparing its results with some simulated results. Finally, a good agreement between the simulated and measured results is noticed.

Implantable antennas have recently been receiving substantial attention for medical diagnosis and treatment. In this paper, a coplanar waveguide-fed monopole antenna for industrial, scientific, and medical (ISM) band biomedical applications is proposed. The antenna has a simple structure is placed on human tissues such as muscle, fat, and skin. The designed antenna is made compatible for implantation by embedding it in an FR4 substrate. The proposed antenna is simulated using the method of moment's software IE3D by assuming the predetermined dielectric constant for the human muscle tissue, fat, and skin. The antenna operates in the frequency of ISM bands, 2.4–2.48 GHz. Simulated and measured gains attain −7.7 and −8 dBi in the frequency of 2.45 GHz. The radiation pattern, return loss, current distribution, and gain of these antennas were examined and characterized.

New wireless wearable monitoring systems integrated in professional garments require a high degree of reliability and autonomy. Active textile antenna systems may serve as platforms for body-centric sensing, localisation, and wireless communication systems, in the meanwhile being comfortable and invisible to the wearer. We present a new dedicated comprehensive design paradigm and combine this with adapted signal-processing techniques that greatly enhance the robustness and the autonomy of these systems. On the one hand, the large amount of real estate available in professional rescue worker garments may be exploited to deploy multiple textile antennas. On the other hand, the size of each radiator may be designed large enough to ensure high radiation efficiency when deployed on the body. This antenna area is then reused by placing active electronics directly underneath and energy harvesters directly on top of the antenna patch. We illustrate this design paradigm by means of recent textile antenna prototypes integrated in professional garments, providing sensing, positioning, and communication capabilities. In particular, a novel wearable active Galileo E1-band antenna is presented and fully characterized, including noise figure, and linearity performance.

An FM-ultra-wideband (UWB) system with a wideband RF carrier (WRC) is proposed for wireless body area network applications. The proposed system can control the channel power by means of an adjustable carrier bandwidth (BW), while the conventional one with a CW carrier (CWC) makes use of peak power control. The implemented WRC system performances have been evaluated for the WRC generation and digital data transmission. In addition, transmission performances have been compared with that of a conventional CWC system by bit-error-rate (BER) tests. For random data of a 29−1 pattern at a data-rate of 64 kbps, in spite of the flexible carrier BW, the WRC system has presented excellent transmission capability compared with that of the CWC system.

Size and feed structure are some of the important constraints for using antenna-elements in multi-element two-dimensional arrays, where easy planar integration and appropriate matching with transceiver chips are essential. This applies especially when differential signaling and adaptable polarization are required. Based on a balanced-fed patch-excited cavity-backed horn antenna (hybrid antenna), feeding concepts, and approaches to reduce size are discussed and evaluated in this paper. The influence of the substrate-integrated cavity is analyzed and methods to overcome the restrictions are presented, together with simulated and measured results. The antenna elements are evaluated with regard to their use in multistatic and polarimetric sparse arrays, which will be briefly introduced. The optimized antennas achieve 10 dB return loss, a gain of more than 5 dBi as well as symmetric and homogeneous radiation patterns in amplitude and phase with low cross-polarization in the desired frequency-band of operation between 70 and 80 GHz.

The wideband coherent-pulse radar provides high-resolution image of the target. The model of this image is a complex envelope superposition corresponding to signals diffracted by the point scatterers. The values of complex envelopes are distributed over the radar image coordinate plane in accordance with the point scatterer positions and their reflection coefficients. The radar image model consists of range and Doppler profiles. The parameters of the target point scatterers were defined by processing of two-dimensional (2D) data extracted from the complex 2D discrete Fourier transforms of the radar image. The proposed parametric system identification method performs the estimation of the model parameters for a short dwell time and the extrapolation of the radar data image beyond this time. The modified procedure of inverse synthesis aperture radar imaging applied to actual data showed a reduction of the Doppler smearing and some improvements of image resolution.

A channel estimation method for chipless wireless sensors is presented. The method is developed to suppress interference signals in radio frequency backscatter systems. It uses two adjacent frequency bands to estimate and suppress the disturbing signal of a dynamic interferer. Afterwards a correction of the sensor tag's backscatter signal is achieved. The method has been tested in indoor measurements with a chipless strain sensor and a chipless temperature sensor. A metal block has been deployed as an interferer. In the given scenario, the method has enabled a determination of the sensors' resonance frequencies with relative errors of <2% in average. A general dependence of the estimation robustness on the peak bandwidth is observed.

This paper proposes a fully integrated 160-GHz transmitter and receiver in package for millimeter-wave applications. The monolithic integrated circuits were designed with a harmonic approach and were fabricated using a SiGe:C HBT production technology with an fT and fmax of 170 and 250 GHz, respectively. The manufactured 2006 × 1865 µm2 bare dies were integrated in 6 × 6 mm2 embedded wafer level ball grid array packages, where they were interconnected with highly directional antennas built on the redistribution layer of the packages. With a total frequency multiplication factor of 36 and an active balun at the first stage, the transmitter allows the use of a 4.5-GHz input signal driven from a single-ended signal source [1] and distributed on a standard low-cost printed circuit board. The receiver comprises a Gilbert-cell-based subharmonic mixer with a simulated 1-dB input compression point of −4 dBm, and a minimum double-sideband noise figure of 16.5 dB. The functionality of the proposed system was successfully demonstrated in a quasi-monostatic FMCW radar measurement with a 1-ms up-chirp frequency sweep from 157 to 160 GHz and in a forward-scatter imaging experiment with an 8-GHz frequency ramp from 157 to 165 GHz.

This paper discusses the operating range of frequency modulated (FM) radars in the presence of interference. For this purpose, radar- and path loss equations are used to draw the equipotential lines for a given signal-to-interference ratio as a function of the spatial distribution of targets and interferers in order to identify relevant scenario constellations. Further the factors influencing the gain of signal versus deterministic interference are discussed based on measurements and simulations. Finally, the influence of different kinds of interference on the spectrum of a frequency modulated continuous wave radar is shown.