Accurate geometrical calibration between the scan coordinates and the camera coordinates is critical in four-dimensional scanning transmission electron microscopy (4D-STEM) for both quantitative imaging and ptychographic reconstructions. For atomic-resolved, in-focus 4D-STEM datasets, we propose a hybrid method incorporating two sub-routines, namely a J-matrix method and a Fourier method, which can calibrate the uniform affine transformation between the scan-camera coordinates using raw data, without a priori knowledge of the crystal structure of the specimen. The hybrid method is found robust against scan distortions and residual probe aberrations. It is also effective even when defects are present in the specimen, or the specimen becomes relatively thick. We will demonstrate that a successful geometrical calibration with the hybrid method will lead to a more reliable recovery of both the specimen and the electron probe in a ptychographic reconstruction. We will also show that, although the elimination of local scan position errors still requires an iterative approach, the rate of convergence can be improved, and the residual errors can be further reduced if the hybrid method can be firstly applied for initial calibration. The code is made available as a simple-to-use tool to correct affine transformations of the scan-camera coordinates in 4D-STEM experiments.

N6-Methyladenosine (m6A) regulates oocyte-to-embryo transition and the reprogramming of somatic cells into induced pluripotent stem cells. However, the role of m6A methylation in porcine early embryonic development and its reprogramming characteristics in somatic cell nuclear transfer (SCNT) embryos are yet to be known. Here, we showed that m6A methylation was essential for normal early embryonic development and its aberrant reprogramming in SCNT embryos. We identified a persistent occurrence of m6A methylation in embryos between 1-cell to blastocyst stages and m6A levels abruptly increased during the morula-to-blastocyst transition. Cycloleucine (methylation inhibitor, 20 mM) treatment efficiently reduced m6A levels, significantly decreased the rates of 4-cell embryos and blastocysts, and disrupted normal lineage allocation. Moreover, cycloleucine treatment also led to higher levels in both apoptosis and autophagy in blastocysts. Furthermore, m6A levels in SCNT embryos at the 4-cell and 8-cell stages were significantly lower than that in parthenogenetic activation (PA) embryos, suggesting an abnormal reprogramming of m6A methylation in SCNT embryos. Correspondingly, expression levels of m6A writers (METTL3 and METTL14) and eraser (FTO) were apparently higher in SCNT 8-cell embryos compared with their PA counterparts. Taken together, these results indicated that aberrant nuclear transfer-mediated reprogramming of m6A methylation was involved in regulating porcine early embryonic development.

Owing to the development of sequencing technology, paleogenomics has become an important source of information on human migration and admixture, complementing findings from archaeology and linguistics. In this study, we retrieved the whole genome and Y chromosome lineage from late Neolithic Honghe individuals in the Middle Amur region in order to provide a bioarchaeological perspective on the origin and expansion of Transeurasian languages in the Amur River basin. Our genetic analysis reveals that the population of the Amur River basin has a stable and continuous genetic structure from the Mesolithic Age up to date. Integrating linguistic and archaeological evidence, we support the hypothesis that the expansion of the Transeurasian language system in the Amur River basin is related to the agricultural development and expansion of the southern Hongshan culture. The spread of agricultural technology resulted in the addition of millet cultivation to the original subsistence mode of fishing and hunting. It played a vital role in the expansion of the population of the region, which in its turn has contributed to the spread of language.

We report high-energy, high-efficiency second harmonic generation in a near-infrared all-solid-state burst-mode picosecond laser at a repetition rate of 1 kHz with four pulses per burst using a type-I noncritical phase-matching lithium triborate crystal. The pulses in each burst have the same time delay (${\sim}1~\text{ns}$), the same pulse duration (${\sim}100~\text{ps}$) and different relative amplitudes that can be adjusted separately. A mode-locked beam from a semiconductor saturable absorber mirror is pulse-stretched, split into seed pulses and injected into a Nd:YAG regenerative amplifier. After the beam is reshaped by aspheric lenses, a two-stage master oscillator power amplifier and 4f imaging systems are applied to obtain a high power of ${\sim}100~\text{W}$. The 532 nm green laser has a maximum conversion efficiency of 68%, an average power of up to 50 W and a beam quality factor $M^{2}$ of 3.5.

The High-degree Cubature Kalman Filter (HCKF) is proposed as a novel methodology based on the arbitrary degree spherical rule, which can achieve better performance than the traditional Kalman filter. However, it also has a large calculation burden when used in a high-dimension and high-degree of accuracy estimation system. The number of sampling points of an HCKF increases polynomially with increasing state-space dimensions, which further increases the calculation burden. The reduction of the number of the state-space dimensions is the main contribution of this study. A strategy for HCKF based on the partitioning of the state-space and orthogonal principle is introduced, referred to as the Multiple Robust HCKF (MRHCKF). It is shown that this technique can effectively reduce the calculation burden for the high-dimension system with robust performance. Numerical simulations are performed for the example of high-dimension relative position and attitude estimation to show that the proposed method can obtain nearly the same performance as the HCKF, while drastically reducing computational complexity.

Underground Nuclear Astrophysics in China (JUNA) will take the advantage of the ultra-low background in Jinping underground lab. High current accelerator with an ECR source and detectors were commissioned. JUNA plans to study directly a number of nuclear reactions important to hydrostatic stellar evolution at their relevant stellar energies. At the first period, JUNA aims at the direct measurements of 25Mg(p,γ)26 Al, 19F(p,α) 16 O, 13C(α, n) 16O and 12C(α,γ) 16O near the Gamow window. The current progress of JUNA will be given.

The micro-nano rough structure promotes the formation of superhydrophobic surfaces, while the formation of superoleophobic surfaces requires the support of re-entrant structures. Electrochemical etching and boiling water treatment methods were used to process the superoleophobic surface in the Al–Mg alloy substrate. The differences between the potential of the aluminum and the magnesium promoted the formation of the surface microstructure under the current stimulation, and the surface was formed into dense nanoscale needle-like coating after boiling water treatment. Scanning electron microscopy, energy dispersive spectroscopy, and contact angle measurement were performed to characterize the morphological features, chemical composition, and surface wettability, respectively. The so-prepared superoleophobic surfaces showed high contact angles and small sliding angles for water, ethylene glycol, and hexadecane. In addition, surface topography, reaction mechanism, and experimental parameters were also studied.

In the Venus capture period, it is difficult for celestial autonomous navigation to satisfy the requirement of high precision. To improve autonomous navigation performance, a Direction, Distance and Velocity (DDV) measurements deeply integrated navigation method is proposed. The “deeply” integrated navigation reflects the fact that the direction and velocity measurements suppress the Doppler effects in the pulsar signals. In the pulsar observation period, the direction and velocity measurements are utilised to compensate for Doppler effects in the pulsar signals. By these means, the residual effects can be ignored. When the direction, distance or velocity measurements are obtained, they are fused to improve the navigation performance. Simulation results demonstrate that the DDV measurements deeply integrated navigation filter converges very well, and provides highly accurate position estimation without a high quality requirement on navigation sensors.

Ni/Sn–xZn/Ni (x = 1, 5, 9 wt%) joints were used to investigate the effect of Zn content on interfacial reactions during reflow under a temperature gradient. Asymmetrical growth and transformation of intermetallic compounds (IMCs) occurred between the cold and hot end interfaces. Faster IMC growth at the cold end and a more prompt IMC transformation at the hot end in a lower Zn content solder joint were identified due to the more thermomigration-induced Zn and Ni atomic fluxes toward the cold end. The main diffusion species into IMC layers changed from Zn atoms at the early stage to Sn and Ni atoms at the later stage. As a result, the IMC evolution followed (Ni,Zn)3Sn4 → Ni3Sn4 in the Ni/Sn–1Zn/Ni joint, Ni5Zn21 → τ phase → Ni3Sn4 in the Ni/Sn–5Zn/Ni joint, and Ni5Zn21 → τ phase in the Ni/Sn–9Zn/Ni joint along with the reflow time. A higher Zn content could effectively inhibit the dissolution of the hot-end Ni substrate and restrain the growth rate of the cold-end interfacial IMCs.

By reflowing Cu/Sn/Ni ultrafine interconnects under a temperature gradient, a new transient liquid phase (TLP) bonding process was proposed for three-dimensional packaging applications. The evolution of the dominant (Cu,Ni)6Sn5 intermetallic compounds depends strongly on the temperature gradient. The essential cause of such dependence is attributed to the different amounts of Cu and Ni atomic fluxes being introduced into the liquid solder. Under the coupling effect of thermomigration and Cu–Ni cross-interaction, the total atomic flux of Cu and Ni is promoted. As a result, the growth of dense (Cu,Ni)6Sn5 is significantly accelerated and the formation of Cu3Sn is eliminated. The new TLP bonding process consumes only a limited amount of the Ni substrate, but much more from the Cu substrate. The mechanism for the new TLP bonding process is discussed and experimentally verified in this study.

The National Continuing Management and Intervention Programme for Psychoses, also known as the 686 Programme, was launched in China in 2004, marking a shift to a hospital-and-community collaborative model of care for patients with psychoses. An updated programme, the National Comprehensive Management Pilot Project for Mental Health, was launched in 2015 with the cooperation of six government ministries and bodies, including the China Disabled Persons Federation. Mechanisms for multi-sector cooperation in mental health services are being put in place in China.

Background: There is growing trend for some surgical procedures previously performed in hospitals to be done in alternative settings, including office-based facilities. There has been some safety concerns reported in the media, which document serious adverse events following procedures performed in an office-based setting. To understand the current regulatory oversight of surgery in this setting ASERNIP-S conducted a review of the legislative and accreditation process governing these facilities in Australia.

Methods: Using rapid review methodology, internet searches targeted government Web sites for relevant publicly-available documents. Use of consolidated versions of legislative instruments ensured currency of information. Standards were sourced directly from the issuing authorities or those that oversee the accreditation process.

Results: Within Australia, healthcare facilities for surgery and their licensing are defined by each state and territory, which results in significant jurisdictional variation. These variations relate to the need for anesthesia beyond conscious sedation and listing of procedures in legislative instruments. In 2013, Australia adopted National Safety and Quality Health Service standards (NSQHS standards) for the accreditation of hospitals and day surgery centers; however, there is no NSQHS standard for office-based facilities. The main legislative driver for compliance is access to reimbursement schemes for service delivery.

Conclusions: The legislative and accreditation framework creates a situation whereby healthcare facilities that provide services outside the various legal definitions of surgery and those not covered by a reimbursement scheme, can operate without licensing and accreditation oversight. This situation exposes patients to potential increased risk of harm when receiving treatment in such unregulated facilities.

Synchrotron radiation real-time imaging technology was performed to in situ study the Cu–Ni cross-interaction in Cu/Sn/Ni solder joints under temperature gradient during soldering. The direction of temperature gradient significantly influenced the Cu–Ni cross-interaction. When Ni was the hot end, both Cu and Ni atoms could diffuse to the opposite interfaces, resulting in the occurrence of the Cu–Ni cross-interaction at both interfaces. The consumption of the Cu cold end was abnormally large, whereas that of the Ni hot end was limited. When Cu was the hot end, only Cu atoms could diffuse to the opposite interface, resulting in the occurrence of the Cu–Ni cross-interaction only at the cold end. The Cu hot end was seriously consumed, whereas the Ni cold end was still intact. The interfacial intermetallic compounds were always thicker at the cold end than at the hot end, especially at the Ni/Sn cold end. Cu imposed more damaging effect than Ni under temperature gradient. Based on the atomic fluxes, a model was proposed to discuss the effect of temperature gradient on the Cu–Ni cross-interaction and the interfacial reactions in the Cu/Sn/Ni solder joints.

Direct coagulation casting of alumina via controlled release of high valence counter ions using ammonium polyphosphate (APP) chelate complex as the coagulating agent was proposed. APP chelate complex suspension was prepared from APP and calcium chloride. Calcium used as high valence counter ions was chelated by APP. The average particle size of the chelate complex is 0.13 μm with a narrow particle size distribution which is close to the size of alumina particles. Glycerol diacetate was used to tailor the pH value of the suspension by hydrolysis which produces acetic acid. The lowering of the pH value helps to decompose the chelate complex, and enhance to release the calcium chelated. It is indicated that the viscosity of the suspensions with the addition of APP chelate complex suspension and glycerol diacetate increases to approximately 20 Pa s after heating at 40–70 °C for 1.5–5 h, which is high enough to coagulate the suspension. 55 vol% alumina suspension with a addition of 3 vol% APP chelate complex suspension and 5 vol% glycerol diacetate treated at 60 °C could coagulate completely within 2 h with a compressive strength of 2.1 MPa. Dense alumina with a relative density of above 97% and a flexural strength of 388 ± 23 MPa can be prepared by this method from 55 vol% alumina suspensions without a burnout process.