Listeriosis is a rare but serious foodborne disease caused by Listeria monocytogenes. This matched case–control study (1:1 ratio) aimed to identify the risk factors associated with food consumption and food-handling habits for the occurrence of sporadic listeriosis in Beijing, China. Cases were defined as patients from whom Listeria was isolated, in addition to the presence of symptoms, including fever, bacteraemia, sepsis and other clinical manifestations corresponding to listeriosis, which were reported via the Beijing Foodborne Disease Surveillance System. Basic patient information and possible risk factors associated with food consumption and food-handling habits were collected through face-to-face interviews. One hundred and six cases were enrolled from 1 January 2018 to 31 December 2020, including 52 perinatal cases and 54 non-perinatal cases. In the non-perinatal group, the consumption of Chinese cold dishes increased the risk of infection by 3.43-fold (95% confidence interval 1.27–9.25, χ2 = 5.92, P = 0.02). In the perinatal group, the risk of infection reduced by 95.2% when raw and cooked foods were well-separated (χ2 = 5.11, P = 0.02). These findings provide important scientific evidence for preventing infection by L. monocytogenes and improving the dissemination of advice regarding food safety for vulnerable populations.

We consider a two-stage submodular maximization problem subject to a cardinality constraint and k matroid constraints, where the objective function is the expected difference of a nonnegative monotone submodular function and a nonnegative monotone modular function. We give two bi-factor approximation algorithms for this problem. The first is a deterministic $\left( {{1 \over {k + 1}}\left( {1 - {1 \over {{e^{k + 1}}}}} \right),1} \right)$-approximation algorithm, and the second is a randomized $\left( {{1 \over {k + 1}}\left( {1 - {1 \over {{e^{k + 1}}}}} \right) - \varepsilon ,1} \right)$-approximation algorithm with improved time efficiency.

This paper first uses a decoupling modeling method to model legged robots. The method groups all the degrees of freedom according to the number of limbs, regarding each limb as a manipulator with serial structure, which greatly reduces the number of dynamic parameters that need to be identified simultaneously. On this basis, a step-by-step identification method from the end-effector link to the base link, referred to as “E-B” identification method, is proposed. Simulation verification is carried out on a quadruped robot with 16 degrees of freedom in Gazebo, and the validity of the method proposed is discussed.

Eurasian steppes experienced frequent cultural transfers, human migration, and diffusion of techniques during the Bronze Age. The Hami Oasis is one of the most dynamic areas and has attracted multiple cultural flows. It is an important area that connects various routes of the Tianshan Corridor with the Hexi Corridor in western China. The Tianshanbeilu cemetery is the largest Bronze Age cemetery in Hami. Thirty-seven new radiocarbon dates allowed us to establish a new and more accurate chronology for Tianshanbeilu. Our results showed that the Tianshanbeilu cemetery was used from approximately 2022–1802 cal BC and remained in use from 1093–707 cal BC. This indicates that Tianshanbeilu is the earliest and longest-used known cemetery in eastern Xinjiang. By incorporating the typology of artifacts and stratigraphic relationships, the development of the Tianshanbeilu cemetery was divided into four phases. The first phase was from 2011–1672 cal BC, the second phase was from 1660–1408 cal BC, the third phase was from 1385–1256 cal BC, and the fourth phase was from 1214–1029 cal BC.

We incorporate deep learning (DL) into tiled aperture coherent beam combining (CBC) systems for the first time, to the best of our knowledge. By using a well-trained convolutional neural network DL model, which has been constructed at a non-focal-plane to avoid the data collision problem, the relative phase of each beamlet could be accurately estimated, and then the phase error in the CBC system could be compensated directly by a servo phase control system. The feasibility and extensibility of the phase control method have been demonstrated by simulating the coherent combining of different hexagonal arrays. This DL-based phase control method offers a new way of eliminating dynamic phase noise in tiled aperture CBC systems, and it could provide a valuable reference on alleviating the long-standing problem that the phase control bandwidth decreases as the number of array elements increases.

Tracheophilus cymbius (Trematoda: Cyclocoelidae) is a common tracheal fluke of waterfowl, causing serious loss in the poultry industry. However, taxonomic identification of T. cymbius remains controversial and confused. Mitochondrial (mt) genomes can provide genetic markers for the identification of closely related species. We determined the mt genome of T. cymbius and reconstructed phylogenies with other trematodes. The T. cymbius mt genome is 13,760 bp in size, and contains 12 protein-coding genes (cox 1–3, nad 1–6, nad 4L, cyt b and atp 6), 22 transfer RNA (tRNA) genes, two ribosomal RNA genes and one non-coding region. All are transcribed in the same direction. The A + T content is 62.82%. ATG and TAG are the most common initiation and termination codons, respectively. Phylogenetic analyses of concatenated nucleotide sequences show T. cymbius grouping in suborder Echinostomata, and clustering together, with high statistical support, as a sister taxon with Echinochasmus japonicus (Echinochasmidae), the two forming a distinct branch rooted to the ancestor of all Echinostomatidae and Fasciolidae species. This is the first report of the T. cymbius mt genome, and the first reported mt genome within the family Cyclocoelidae. These data will provide a significant resource of molecular markers for studying the taxonomy, population genetics and systematics of trematodes.

The cao vit gibbon Nomascus nasutus, also known as eastern black crested gibbon, is categorized as Critically Endangered on the IUCN Red List and was considered one of the world's 25 most threatened primates. The only known population occurs along the border between China and Viet Nam. Accurate information on population size and dynamics is critical for the species’ conservation, but population surveys conducted in only one country may over- or underestimate total population size because the home ranges of cao vit gibbon groups often cross the international border. In 2007 and 2016 we conducted two collaborative transboundary censuses of the cao vit gibbon populations in the Trung Khanh Cao Vit Gibbon Species and Habitat Conservation Area in Viet Nam and the Bangliang Gibbon National Nature Reserve in China. The results showed a population size of 102–110 in 2007, which increased to 107–136 in 2016. Our results indicate that previous surveys conducted separately in Viet Nam and China underestimated the global population size of this species. According to our more comprehensive surveys, the gibbon population is increasing slowly. The gibbons and their habitat are legally protected in both countries. Hunting and charcoal making have not been reported in this area since 2007. As habitat carrying capacity is a limiting factor, habitat restoration is required. However, lack of funding to protect the cao vit gibbon remains a challenge.

In the 2015 review paper ‘Petawatt Class Lasers Worldwide’ a comprehensive overview of the current status of high-power facilities of ${>}200~\text{TW}$ was presented. This was largely based on facility specifications, with some description of their uses, for instance in fundamental ultra-high-intensity interactions, secondary source generation, and inertial confinement fusion (ICF). With the 2018 Nobel Prize in Physics being awarded to Professors Donna Strickland and Gerard Mourou for the development of the technique of chirped pulse amplification (CPA), which made these lasers possible, we celebrate by providing a comprehensive update of the current status of ultra-high-power lasers and demonstrate how the technology has developed. We are now in the era of multi-petawatt facilities coming online, with 100 PW lasers being proposed and even under construction. In addition to this there is a pull towards development of industrial and multi-disciplinary applications, which demands much higher repetition rates, delivering high-average powers with higher efficiencies and the use of alternative wavelengths: mid-IR facilities. So apart from a comprehensive update of the current global status, we want to look at what technologies are to be deployed to get to these new regimes, and some of the critical issues facing their development.

The carbon isotope value of ethane in the southern part of the Jingbian gas field is lower than that in the northern part, indicating a carbon isotopic reversal in the southern Jingbian gas field (δ13Cmethane > δ13Cethane). Through comparing the geochemical characteristics of gases in the southern and northern parts of the gas field, the reasons for the carbon isotopic reversal in the southern Jingbian gas field were determined to be high thermal maturity and mixing action. When thermal maturity reaches a critical value, the carbon isotope value of ethane becomes relatively more depleted with thermal maturity. Although the carbon isotope value of methane increases with thermal maturity, the extent is relatively smaller. Finally, the rare phenomenon of δ13Cmethane > δ13Cethane occurs. High thermal maturity leads to the secondary thermal cracking of gases. Mixing of the cracked gases and primary gases also leads to carbon isotopic reversal. Both of the above mechanisms share a common premise, which is high thermal maturity.

Underground Nuclear Astrophysics in China (JUNA) will take the advantage of the ultra-low background in Jinping underground lab. High current accelerator with an ECR source and detectors were commissioned. JUNA plans to study directly a number of nuclear reactions important to hydrostatic stellar evolution at their relevant stellar energies. At the first period, JUNA aims at the direct measurements of 25Mg(p,γ)26 Al, 19F(p,α) 16 O, 13C(α, n) 16O and 12C(α,γ) 16O near the Gamow window. The current progress of JUNA will be given.

The excessive use of plastic, especially polystyrene (PS), has caused serious environmental pollution. The efficient utilization of plastics and the conversion of plastics into value-added carbon materials are the concerns of researchers. Herein, we propose novel “pyrolysis–deposition” method to convert one popular plastic substance, PS, into ordered mesoporous carbons (OMCs). During the synthesis process, PS is pyrolyzed into small organic gases under high temperature, which is then adsorbed through capillary adsorption into the mesoporous of SBA-15 in the presence of catalyst. The obtained OMCs have high specific surface area, uniform pore size, and ordered pore structure. The OMCs exhibit specific capacitance of 118 F/g at a current density of 0.2 A/g and electrochemical stability of 87.2% at a current density of 2 A/g after 5000 cycles. The pyrolysis–deposition strategy provides a new idea to convert waste plastics into high-performance carbon materials for electrochemical applications.

A kind of novel Ni–P gradient coating/stannate conversion film was deposited on AZ91D magnesium alloy (AZ91D alloy) by an integrative method involved stannate conversion and electroless plating. The results indicated that using sodium hypophosphite concentrations varied as 5, 10, 22, 46, and 60 g/L in the bath, the electroless Ni–P gradient coating with typical cell morphologies was successfully prepared, and the structures transited from crystalline → microcrystalline → amorphous were obtained as increasing P content from 3.31 to 12.58 wt%. Furthermore, the corrosion morphologies, polarization curves, and the electrochemical impedance spectroscopy result indicated that the corrosion resistance of AZ91D alloy substrate was significantly improved and the corrosion resistance of Ni–P gradient coating was superior than that of stannate conversion film, which might be attributed to the gradient structure and rising P content with unique function.

The topological insulator/superconductor heterostructure is one of the most promising platforms to create and manipulate Majorana bound states. Here, we used molecular beam epitaxy to grow high-quality (Bi0.5Sb0.5)2Te3 films on Nb surfaces. To promote proper (Bi0.5Sb0.5)2Te3 film nucleation in the early growth stage, we developed a two-step growth method. Bi, Sb, and Te clusters were first evaporated at a low temperature of 180 °C, which is below the typical growth temperature and then annealed to form a crystalized passivation layer. Second, a standard (Bi0.5Sb0.5)2Te3 film was grown under the normal deposition temperature of 280 °C. We used reflection high-energy electron diffraction, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction to further characterize the (Bi0.5Sb0.5)2Te3 film and passivation layer quality. Finally, the top Nb film was laid down by magnetron sputtering at room temperature. The hetero-Nb/epitaxial (Bi0.5Sb0.5)2Te3/Nb stacks were further fabricated into micro-Josephson junctions and showed clear Josephson currents demonstrating an excellent material quality.

In this study, a novel shape memory polymer (SMP), eggshell membrane (ESM), with macroscopic mesh structures and microscopic crosslinked protein fibers, has shown water-stimulated shape recovery characteristics. Our results show that the collagen triple-helical molecular chains and disulfide-rich motifs in the ESM function as net-points retaining essential structures during deformation, while hydrogen bonds play a key role as switch units for shape recovery through water stimulation. We also demonstrate that programmable shape recovery characteristics of ESM can be obtained by modulating the number of net-points. This study may inspire the design of new programmable SMPs.

The discovery of the first electromagnetic counterpart to a gravitational wave signal has generated follow-up observations by over 50 facilities world-wide, ushering in the new era of multi-messenger astronomy. In this paper, we present follow-up observations of the gravitational wave event GW170817 and its electromagnetic counterpart SSS17a/DLT17ck (IAU label AT2017gfo) by 14 Australian telescopes and partner observatories as part of Australian-based and Australian-led research programs. We report early- to late-time multi-wavelength observations, including optical imaging and spectroscopy, mid-infrared imaging, radio imaging, and searches for fast radio bursts. Our optical spectra reveal that the transient source emission cooled from approximately 6 400 K to 2 100 K over a 7-d period and produced no significant optical emission lines. The spectral profiles, cooling rate, and photometric light curves are consistent with the expected outburst and subsequent processes of a binary neutron star merger. Star formation in the host galaxy probably ceased at least a Gyr ago, although there is evidence for a galaxy merger. Binary pulsars with short (100 Myr) decay times are therefore unlikely progenitors, but pulsars like PSR B1534+12 with its 2.7 Gyr coalescence time could produce such a merger. The displacement (~2.2 kpc) of the binary star system from the centre of the main galaxy is not unusual for stars in the host galaxy or stars originating in the merging galaxy, and therefore any constraints on the kick velocity imparted to the progenitor are poor.

The Yellow Sea region is of high global importance for waterbird populations, but recent systematic bird count data enabling identification of the most important sites are relatively sparse for some areas. Surveys of waterbirds at three sites on the coast of southern Jiangsu Province, China, in 2014 and 2015 produced peak counts of international importance for 24 species, including seven globally threatened and six Near Threatened species. The area is of particular global importance for the ‘Critically Endangered’ Spoon-billed Sandpiper Calidris pygmaea (peak count across all three study sites: 62 in spring [2015] and 225 in autumn [2014] and ‘Endangered’ Spotted Greenshank Tringa guttifer (peak count across all three study sites: 210 in spring [2014] and 1,110 in autumn [2015]). The southern Jiangsu coast is therefore currently the most important migratory stopover area in the world, in both spring and autumn, for both species. Several serious and acute threats to waterbirds were recorded at these study sites. Paramount is the threat of large-scale land claim which would completely destroy intertidal mudflats of critical importance to waterbirds. Degradation of intertidal mudflat habitats through the spread of invasive Spartina, and mortality of waterbirds by entrapment in nets or deliberate poisoning are also real and present serious threats here. Collisions with, and displacement by, wind turbines and other structures, and industrial chemical pollution may represent additional potential threats. We recommend the rapid establishment of effective protected areas for waterbirds in the study area, maintaining large areas of open intertidal mudflat, and the urgent removal of all serious threats currently faced by waterbirds here.

The hydrogenation behavior of Ti–44Al–6Nb (at.%) alloy was studied at temperature range of 1373–1693 K, and the effect of hydrogen on hot deformability was tested on Gleeble-1500D thermo-simulation machine. It is found that the lnCH increases linearly with 1/T, and hydrogen content increases with increasing of hydrogen time and flow rate logarithmically. The positive heat of solution of hydrogen denotes that hydrogen absorption in TiAl alloys is an endothermic reaction. The results also show that hydrogen promotes the lamellar colony size and lamellar spacing because that hydrogen can promote the diffusion of elements. There is more residual B2 phase in the hydrogenated alloy revealing that hydrogen stabilizes the B2 phase during hydrogenation. The nanohardness and elastic modulus of the alloy are decreased from 4.4 and 213.5 GPa to 4.2 and 199.8 GPa after hydrogenation with 0.033 wt% H. Thermal simulation results show that the peak stress is decreased by 30% after hydrogenation with 0.033 wt% H which corresponds to decreasing the deformation temperature by about 50 K. This is attributed to hydrogen-promoted dynamic recrystallization and dislocation movement.

A novel generalised successive overrelaxation (GSOR) method for solving generalised saddle point problems is proposed, based on splitting the coefficient matrix. The proposed method is shown to converge under suitable restrictions on the iteration parameters, and we present some illustrative numerical results.