Distributions of brachiopods from low-latitude paleogeographic settings, primarily in the Tethyan Ocean of southern Europe, with additional data from North America allow some observations on the bathymetric distribution of early Mesozoic brachiopod orders. Norian and latest Triassic (Rhaetian) brachiopod biofacies are dominated in shallowest waters by short-looped terebratulids (Terebratulidina) while spire-bearing athyrids (Athyrida) are common components of deeper-water environments in the latest Triassic. In the late Early Jurassic (Pliensbachian), shallow-water brachiopod faunas are dominated by rhynchonellids, short-looped terebratulids are commoner in relatively deeper shelf waters, and spiriferids and long-looped terebratulids (Terebratellidina) are abundant in deeper-water shelf environments.

Following the end-Triassic extinction event there appears to be niche-replacement in deep-water shelf environments of Late Triassic athyrids by spiriferids and long-looped terebratulids in the Early Jurassic. Rhynchonellids appear to have diversified into shallowest water environments; specialized short-looped terebratulids may have occupied deeper-water niches that resulted ultimately in the success of the enigmatic Pygopidae later in the Jurassic and Cretaceous.

Interior chamber walls of ammonites range from smoothly undulating surfaces in some taxa to complex surfaces, corrugated on many scales, in others. The ammonite suture, which is the expression of the intersection of these walls on the exterior of the shell, has been used to assess anatomical complexity. We used the fractal dimension to measure sutural complexity and to investigate complexity over evolutionary time and showed that the range of variation in sutural complexity increased through time. In this paper we extend our analyses and consider two new parameters that measure the range of scales over which fractal geometry is a satisfactory metric of a suture. We use a principal components analysis of these parameters and the fractal dimension to establish a two-dimensional morphospace in which the shapes of sutures can be plotted and in which variations and evolution of suture morphology can be investigated. Our results show that morphospace coordinates of ammonitic sutures correspond to visually perceptible differences in suture shape. However, three main classes of sutures (goniatitic, ceratitic, and ammonitic) are not unambiguously discriminated in this morphospace. Interestingly, ammonitic sutures occupy a smaller morphospace than other suture types (roughly one-half of the morphospace of goniatitic and ceratitic sutures combined), and the space they occupied did not change dimensions from the Jurassic to the late Cretaceous.

We also compare two methods commonly used to measure the fractal dimension of linear features: the Box method and the Richardson (or divider) method. Both methods yield comparable results for ammonitic sutures but the Richardson method yields more precise results for less complex sutures.

In several increasingly realistic steps, a model of the stratigraphic distribution of fossils is presented. The first and simplest step assumes that if a taxon was extant it will have been preserved. The second step admits that if a taxon was extant, there is some probability less than one that it will have been preserved. This step produces randomly distributed gaps, and fossil ranges that are somewhat shorter than the span of time in which a taxon actually lived. The third step assumes facies-controlled taxa and parasequence-style cyclicity. This produces randomly and nonrandomly distributed gaps, including the anomalously long gaps recognized in confidence limit studies. The final model incorporates depositional sequences and indicates that first and last occurrences will cluster at sequence boundaries and at flooding surfaces in the transgressive systems tract. Across-shelf gradients in diversity, taphonomy, or eurytopy can control the strength, but not the stratigraphic position of these peaks. Comparison of the model to data from the Upper Ordovician suggests that these modeled features are present in the fossil record. Many previously studied paleobiologic patterns may be, at least in part, an artifact of facies control and sequence architecture. Such patterns include gradual or stepwise mass extinction, punctuated morphologic and taxonomic change, iterative evolution, and the replacement of shallow water faunas by deeper water faunas at biomere boundaries.

We propose that the ancestors of bats were small, nocturnal, sylvatic gliders that used echolocation for general orientation. Their echolocation calls were short, low intensity, broadband clicks, which translated into a very short operational range. In the lineage that gave rise to bats, a switch to stronger, tonal signals permitted the use of echolocation to detect, track, and assess flying insects in subcanopy settings. We propose that these animals hunted from perches and used echolocation to detect, track, and assess flying insects, which they attacked while gliding. In this way, the perfection of echolocation for hunting preceded the appearance of flapping flight, which marked the emergence of bats. Flapping flight had appeared by the Eocene when at least eight families are known from the fossil record. Stronger signals and adaptations to minimize self-deafening were central to the perfection of echolocation for locating flying prey. Echolocation constituted a key innovation that permitted the evolution and radiation of bats. At the same time, however, its short effective range imposed a major constraint on the size of bats. This constraint is associated with flight speed and the very small time intervals from detection of, and contact with a flying target. Gleaning and high duty cycle echolocation are two derived approaches to hunting prey in cluttered situations, places where echoes from background and other objects arrive before or at the same time as echoes from prey. Both had appeared by the Eocene.

The most widely cited explanation for the functional enigma of sutural complexity in ammonoids, the Buckland hypothesis, has related septal folding and fluting to buttressing, providing increased shell strength against implosion, along with increased efficiency and decreased weight in shell and septum construction. In Paleozoic ammonoids, sutures ranged from simple to extremely complex. Comparison of shell and septum thickness (in polished sections) with sutural complexity in 49 Paleozoic ammonoid genera (Middle Devonian–Upper Permian) indicates that no significant reduction in either septum thickness or shell thickness accompanied a one-hundred-fold increase in sutural complexity. These preliminary results fail to support the Buckland hypothesis, suggest there may have been alternative incentives for increasing sutural complexity, and add support to views that septal fluting may have been related to buoyancy control.

The mode of locomotion of any swimming animal is constrained by its size, architecture, and phylogenetic history. Considering these factors and the range of locomotory systems used by extant zooplankton, the range of possible modes of locomotion for graptoloids can be effectively limited. Three assumptions have been made: (1) graptoloids did not use a mode of locomotion unknown among modern organisms; (2) all graptoloids employed essentially the same mode of locomotion except, possibly, in their early growth stages; and (3) graptoloids did not rely entirely on passive buoyancy—no extant zooplankton groups in the size range of the graptoloids do. Structures that increase buoyancy or drag are often found in actively swimming zooplankton. They enhance feeding efficiency and reduce sinking rates during nonswimming periods.

The modes of locomotion utilized by extant zooplankton groups are ciliary propulsion, elongate body undulation, jet propulsion, rowing with skeletonized appendages, and rowing or undulation with muscular appendages. Of these, all but the last can be rejected for the graptoloids on the basis of scale or architecture. It is concluded that graptoloids probably used a rowing or undulatory motion with muscular appendages for swimming. Using a pterobranch model for the graptoloid zooids, the lophophore is considered an unlikely propulsive structure because the design requirements would conflict with those of a ciliarly suspension-feeding organ. Winglike, lateral extensions of the muscular cephalic shield, the same structure used for creeping locomotion in the benthic pterobranchs, is regarded as the most likely propulsive organ, analogous to the pteropod swimming wings.

The relative numbers of sexually and asexually recruited colonies and the proportion of brooding zooids were determined in 26 species of cheilostome bryozoans of Late Cretaceous and Early Tertiary ages. Asexual reproduction seems to be much more widespread than previously realized, although its relative importance is related to growth habit. Arborescent species of these fossil assemblages reproduce mainly asexually via fragmentation; encrusting species reproduce sexually via motile larvae. Free-living species use both methods; some reproduce sexually, whereas other species have enhanced the ability to break and reproduce predominantly asexually. Mode of reproduction was stable over a period of 3 m.y. in all species except the vinelike Columnotheca cribrosa. In this species both the proportion of asexual recruits and brooding zooids varied in accord with environmental parameters. In all cases populations dominated by asexual propagation had a significantly lower proportion of brooding zooids than populations dominated by sexual propagation.

I describe a mathematical model of shells that incorporates simple morphometric measurements, which can be obtained easily from sectioned specimens. The model reconstructs form (size and shape) by describing the path in space traversed by, and the changes in dimensions of, a shell aperture during accretionary growth. The model contains parameters that independently affect components of these two aspects of shell form in directions radially away from (or toward) and along a coiling axis. I also describe a computer program, CerioShell, that uses the mathematical model to graphically simulate shell forms. The program permits the viewing of images from different three-dimensional orientations, using various graphical representations, and provides dimensions of the images it generates. Together, the model and the program allow one to investigate the effects that changes in modes of growth would have on shell form.

Theoretical and experimental biomechanical approaches are used to test the effect regular archaeocyathan central cavity diameter has on the generation of passive flow through the skeleton. These results are then used to predict a correspondence between gross morphology and paleoenvironmental occurrence. Previous work has demonstrated that regular archaeocyathan morphology generates passive flow, via Bernoulli and viscous entrainment effects, through its porous walls for suspension feeding, a phenomenon that occurs in modern sponges. Efficacy of entrainment depends upon the area of the excurrent pore (i.e., central cavity) over which the ambient flow is moving. Consequently, archaeocyaths should have maximized their central cavity diameters.

Five-centimeter-long, conical and cylindrical acrylic pipes with varying end diameters were tested in a flume to document the relative effects of Bernoulli and viscous entrainment. Each pipe was oriented perpendicular to the flow direction in a uniform flow field, and fluorescein dye was injected at the pipe's mid-length for flow visualization. Models with different-sized apertures consistently exhibit dye movement to the larger opening and greater dye entrainment speeds than models with identically sized apertures, thereby suggesting that viscous entrainment effects are significant and operating in concert with Bernoulli effects. To test for similar effects in archaeocyaths, four brass models were constructed with varying central cavity diameters. Both volume flux and excurrent flow speed of the exiting water increased as the central cavity diameter increased. An analysis of the morphologies that occur in nature confirm these results. Regular archaeocyaths most commonly have central cavity diameters close to their outer wall diameter, thereby maximizing the excurrent pore area.

These results have implications for archaeocyathan paleoecology. Environments with low-magnitude currents should support individuals with larger central cavity diameters than higher energy settings. Data on the occurrence of morphotypes within bioherms of varying flow energies from South Australia support this prediction.

The unique manner in which molars from members of the family Elephantidae erupt in the jaw and wear obliquely and sequentially has profound effects upon dental function and phylogenetic change within the group. Three-dimensional modeling using a “molar matrix” of elephantid dentition, and application of such models to systematic and functional studies, allows a more refined description of dental morphology. A method of examining variation within elephantid teeth is presented based on successive staging of worn molars. Results indicate that individual plates exhibit increasingly derived features with wear (relative to the systematic analysis used here), while successively worn plates exhibit successively more plesiomorphic features apically and posteriorly. Further, results indicate that the patterns developed by wear on the surface of elephantid molars are conserved throughout life despite their unique successive replacement pattern. The cheek teeth in a molar series act as a single, continuous masticating unit, here termed a “cheek tooth battery.” Overall, the tools developed here, wear staging and molar matrices, allow for a more refined understanding of morphological variation within and between elephantids, with application to more conservative elephantoid taxa.

Concavo-convex brachiopods are generally assumed to have lived with their convex valves against the sediment. This orientation is based primarily on the a priori assumption that the upturned commissure would prevent fouling of the brachiopods' mantle cavity. Here, I present epibiontic and taphonomic evidence from orthids and nonproductid strophomenids that concavo-convex brachiopods lived in the reverse life orientation, with the convex valve on top.

Ten testable epibiontic and taphonomic criteria are proposed to establish the uppermost valve during encrustation and whether epibionts encrusted primarily live or dead hosts. The criteria are evaluated for 11 collections of Ordovician and Devonian nonproductid concavo-convex brachiopods that contain a total of over 500 brachiopods and 4000 epibionts. In all cases, the results support a convex-up orientation and the encrustation of live hosts. Five criteria concern epibiont growth patterns and show that (1) epibionts predominate on convex valves, (2) epibionts are not restricted to shell margins, (3) distinct exposed and cryptic faunas, as predicted theoretically and described in previous studies, exist on convex and concave valves respectively, (4) epibiont colonies were often truncated by the commissures and hinges of live hosts, and (5) growth patterns of some epibionts indicate live hosts. Five taphonomic criteria show that (1) concavo-convex shells have greater epibiont cover than other morphologies, (2) internal surfaces of disarticulated specimens are rarely encrusted, (3) interiors of articulated specimens are rarely mud-filled, (4) standard taphofacies indicators suggest little postmortem exposure, and (5) sedimentological reconstructions suggest rapid burial.

Convex-up brachiopods suggest that the Paleozoic mud bottoms they lived on were probably firmer than usually assumed and that a more complex functional interpretation of concavo-convexity is required. Hydrodynamic stability was important to many concavo-convex, plano-convex, and unequally bi-convex brachiopods. Brachiopods with these morphologies probably lived in the more stable orientation on their concave or flat valve. Productid brachiopods, although also concavo-convex, lived convex valve down and are ecologically distinct from earlier concavo-convex taxa. Productids were anchored, semi-infaunally, by spines and were more similar to Mesozoic oysters in orientation and shell function.

Small terrestrial vertebrates are not capable of maintaining a constant body temperature (±2°C) without a relatively high metabolism. The amount of temperature variability during bone growth can be determined using oxygen isotopes from bone phosphate because fractionation of oxygen isotopes between body fluid and bone phosphate is dependent upon temperature. Fluctuation of body temperature during the early phase of growth in juvenile ectotherms should result in high intra- and interbone isotopic variability, whereas juvenile endotherms should have low isotopic variability resulting from the maintenance of homeothermy. Analyses of juvenile Hypacrosaurus individuals indicate a pattern of low isotopic heterogeneity suggestive of endothermy.

We report on the bone microstructure of the Late Cretaceous birds Patagopteryx deferrariisi and members of the Enantiornithes. These birds represent the most primitive birds ever studied histologically. The occurrence of growth rings indicating alternating periods of slowed and fast growth suggests that these basal birds had slower growth rates, and differed physiologically from their modern relatives. Our findings also call into question previous ideas suggesting that nonavian theropods developed a full avian degree of homeothermic endothermy, which was later inherited by birds. On the contrary, our findings suggest that birds developed classic endothermy relatively late in their phylogenetic history.