Sediments deposited from the Permian–Triassic boundary (~252 Ma) until the end-Smithian (Early Triassic; c. 250.7 Ma) in the Sonoma Foreland Basin show marked thickness variations between its southern (up to c. 250 m thick) and northern (up to c. 550 m thick) parts. This basin formed as a flexural response to the emplacement of the Golconda Allochthon during the Sonoma orogeny. Using a high-resolution backstripping approach, a numerical model and sediment thickness to obtain a quantitative subsidence analysis, we discuss the controlling factor(s) responsible for spatial variations in thickness. We show that sedimentary overload is not sufficient to explain the significant discrepancy observed in the sedimentary record of the basin. We argue that the inherited rheological properties of the basement terranes and spatial heterogeneity of the allochthon are of paramount importance in controlling the subsidence and thickness spatial distribution across the Sonoma Foreland Basin.

Silicified beyrichiocopid and podocopid ostracods from limestone nodules derived from the middle part of the Ichinotani Formation within the Hida Gaien Terrane of central Honshu Island, Japan, are associated with fusulinid foraminifera that indicate strata of the middle Moscovian (Pennsylvanian, Carboniferous). This is a rare record of ostracods from the Palaeozoic of Japan and the first systematic description of ostracods from the Carboniferous of the Hida Gaien Terrane. The fauna comprises six ostracod species (two new) assigned to the genera Amphissites, Kirkbya, Bairdia, Aechmina and Healdia, and additional material of possible cavellinids. The numerical dominance of ornamented beyrichiocopids such as Kirkbya and Amphissites, along with smaller numbers of smooth podocopids such as Bairdia, indicates an ‘Eifelian mega-assemblage’ ecotype (sensu G. Becker), that is typical of mid Palaeozoic shallow marine, high-energy environments in a fore-reef ecosystem.

Integrated Ocean Drilling Program Leg 307 Site U1318 is one of the few relatively complete middle Miocene drillcores from the North Atlantic (Porcupine Basin, offshore southwestern Ireland). Using benthic foraminiferal stable carbon and oxygen isotopes, the existing age model for Site U1318 was improved. The stable isotope record displays globally recognized isotope events, used to revise the existing magnetostratigraphy-based age model. Two intervals contained misidentified magnetochrons which were corrected. The sampled interval now has a refined age of 12.75–16.60 Ma with a temporal resolution of c. 29 ka.

Using carbon and oxygen isotopic relationships from dental enamel, diet and habitat were inferred for both mesomammals and megamammals that lived in Cedral (San Luis Potosi, north-central México) during Late Pleistocene time. δ13C and δ18O values show that bison, some horses and mammoth were eating C4 plants and lived in open areas, while tapir, camel and some llamas ate C3 plants and inhabited closed areas. All other studied herbivores (pronghorn, glyptodont, mylodont ground sloth, javelina, mastodon, and other llamas, horses and mammoth) had a C3/C4 mixed diet, living in areas with some percentage of tree coverage. On the other hand, American lion and dire wolf ate either C4 or mixed-diet herbivores, and short-faced bear ate C3 herbivores. At Cedral, more humid conditions existed than presently, allowing the presence of a forested area near the grassland.

The North China Craton (NCC) is one of the classic examples of decratonization through extensive lithospheric destruction during Mesozoic time. Among the various pulses of magmatism associated with cratonic erosion are the rare mafic intrusions in the Yanshan Belt. Here we investigate the Shangzhuang layered intrusion belonging to this suite, which is characterized by compositional layering with troctolite, noritic gabbro and gabbro/gabbroic anorthosite/gabbrodiorite from the bottom to top. The different lithologies of this intrusion exhibit close field relationships, similar chemical patterns and overall identical Lu–Hf isotopes indicating a co-magmatic nature. The fine-grained gabbros occurring near the margin of the intrusion display U–Pb ages similar to those of the other rocks and are considered to represent the composition of the parent magma, characterized by Fe, Mg and Ti enrichment. The magma was sourced from low-degree partial melting of spinel lherzolite sub-continental lithospheric mantle, which had been enriched by crust–mantle interaction and metasomatic fluids derived from the Mongolian oceanic slab subduction beneath the NCC during Late Palaeozoic time. In addition, limited asthenospheric or deeper-mantle materials were also locally mixed with the enriched mantle as the final source component. Our zircon U–Pb data constrain the emplacement age of this intrusion as c. 128–123 Ma in Early Cretaceous time, and correlates with the regional extensional tectonics between c. 135 and 115 Ma in the eastern and central NCC. Mantle upwelling associated with this event resulted in the thermal and chemical erosion of the lithospheric mantle, and emplacement of the parent magma of this layered intrusion.

We have analysed a newly exposed conodont association from the Santa Gertrudis Formation in the Mojotoro Range, Eastern Cordillera of Salta province, Argentina. The key species Baltoniodus triangularis (Lindström), Trapezognathus quadrangulum (Lindström) and Erraticodon patu Cooper are present. A new species of the genus Baltoniodus (Baltoniodus cooperi sp. nov.) and elements of Periodon aff. P. flabellum are included in this conodont study. The key conodont B. triangularis indicates an age of lower Dapingian (Middle Ordovician) for the bearing strata. This was also recognized in other localities of the Eastern Cordillera, allowing their correlation. The conodonts from the Santa Gertrudis Formation provide conclusive elements on palaeogeographic interpretation by sharing species with Baltoscandia, South China and Australia, suggesting strong faunal affinities with these provinces.

Latest Sandbian to early Katian sequences across Laurentia's epicontinental sea exhibit a transition from lithologies characterized as ‘warm-water’ carbonates to those characterized as ‘cool-water'carbonates. This shift occurs across the regionally recognized M4/M5 sequence stratigraphic boundary and has been attributed to climatic cooling and glaciation, basin reorganization and upwelling of open ocean water, and/or increased water turbidity and terrigenous input associated with the Taconic tectophase. Documentation of oxygen isotopic trends across the M4/M5 and through bracketing strata provides a potential means of distinguishing among these alternative scenarios; however, oxygen isotopic records generated to date have failed to settle the debate. This lack of resolution is because δ18O records are open to multiple interpretations and potentially confounding factors related to local environmental conditions have not been tested by examining the critical interval in multiple areas and different depositional settings. To begin to address this shortcoming, we present new species-specific and mixed assemblage conodont δ18O values in samples spanning the M4/M5 boundary from the Upper Mississippi Valley, Alabama, and Virginia. The new results are combined with previous studies, providing a record of δ18O variability across SE Laurentia. The combined dataset allows us to test for regional trends at a resolution not previously available. Our results document a ~1.5‰ decrease in values across Laurentia instead of increasing δ18O values across the M4/M5 as predicted in various ‘cool-water’ scenarios. In short, these results do not support a shift to ‘cool-water’ conditions as an explanation for changes in early Katian carbonates across the M4/M5.

The Anarak Metamorphic Complex, localized in Central Iran, is a fossil accretionary wedge composed of several tectonometamorphic units. Some of these, the Chah Gorbeh, the Morghab and the Ophiolitic complexes, contain mafic rocks that have been metamorphosed at high-pressure–low-temperature conditions. Such units have been stacked together and later refolded during the final stages of exhumation. Structural analysis at the mesoscale recognized at least three deformation events. Microstructural analyses, mineral chemistry and thermodynamic modelling reveal that the mafic schists followed contrasting P–T paths during their tectonometamorphic evolutions. In the schists of the Chah Gorbeh and Ophiolitic complexes an early greenschist-facies stage was later overprinted by blueschist-facies phase assemblages with suggested peak conditions of 390–440°C at 0.6–0.9 GPa for the meta-basalt within the Ophiolitic Complex and 320–380°C at 0.6–0.9 GPa for the blueschists of the Chah Gorbeh Complex. P–T conditions at metamorphic peak were 410–450°C at 0.78–0.9 GPa for the Morghab blueschists, but they are reached before a greenschist-facies re-equilibration. Compositional zoning of amphiboles and epidotes of this greenschist-facies stage suggests a renewed pressure increase at the end of this metamorphic stage. Based on these data we reconstructed a clockwise P–T path for the Morghab mafic schists and a counter-clockwise path for the Chah Gorbeh blueschists and ophiolitic meta-basalts. Such contrasting metamorphic evolutions of tectonic units that were later accreted to the same wedge are indicative of the complex tectonic dynamics that occur within accretionary–subduction complexes.

The Ranomena ultramafic complex in NE Madagascar consists of layered gabbro, harzburgite, orthopyroxenite, clinopyroxenite, garnet websterite and chromitite-layered peridotite. This study of the Ranomena chromite chemistry aims to better understand the petrogenesis and palaeotectonic environment of the complex. The chromite from the Ranomena chromitite is unzoned/weakly zoned and has a Cr# (Cr/(Cr + Al)) of 0.59–0.69, a Mg# (Mg/(Fe + Mg)) of 0.37–0.44, and low Al2O3 (15–23 wt %) suggesting derivation from a supra-subduction zone arc setting. Calculation of parental melt composition suggests that the parental magma composition of the Ranomena chromitite was similar to that of a primitive tholeiitic basalt formed at a high degree of mantle melting, suggesting the parental melt composition was equivalent to that of an island-arc tholeiite (IAT). The parental magma of the Ranomena chromite had a FeO/MgO ratio of 0.9 to 1.8, suggesting arc derivation. The parental magma was Al- and Fe-rich, similar to a tholeiitic basaltic magma. The composition of orthopyroxene from the chromitite indicates a crystallization temperature range of 1250–1300°C at 1.0 GPa. The chemistry of the chromite in the Ranomena chromitite further suggests that the complex formed in a supra-subduction zone arc tectonic setting.

The genus Neomonoceratina, which dominated the ostracod assemblage in the uppermost part of the Akasaki Formation (Miroku Group) of the Kyushu Island, Japan, is associated with the benthic foraminifer Ammonia cf. beccarii, mollusca Terebralia? sp. and Anomia sp., and the oogonium of Charophyceae, indicating a marine-to-brackish estuarine environment involving inflowing freshwater. This is the first record of Eocene coastal-estuarine ostracods from the eastern margin of the Eurasian continent and demonstrates that different pre-Neogene coastal-estuarine ostracod assemblages flourished in this region. The assemblages comprised five ostracod species (including one novel species) assigned to the genera Neomonoceratina, Paijeiborchella, Propontocypris and Parakrithella. These species exhibited genus-level links with the Eocene borehole cores along the continental shelf of the East China Sea and other areas of Kyushu. Fossil data of characteristic Eocene coastal-estuarine genera collected worldwide indicate that different characteristic genera inhabited each region. For example, Neomonoceratina originated on the Indian subcontinent by the Early Paleocene period at the latest, along with the northern drift of the Indian subcontinent. These species subsequently diversified west and east with the equatorial current and counter-current via the Tethys and reached the eastern margin of the Eurasian continent among the various eastwards-migrating species, where one genus ultimately adapted to the coastal-estuarine environment. Notably, the coastal-estuarine ostracod assemblage of the eastern margin of the Eurasian continent differs completely from that of the Tethys during the Eocene period. Our results suggest that coastal-estuarine ostracod assemblages are a powerful tool for palaeogeographic reconstruction.

The Wudang Complex located in the central part of South Qinling, has been inferred to be a segment of the Yangtze Craton involved in the orogen. In this study, the cooling/exhumation history of the Wudang Complex is revealed through combined published geochronology data and new apatite fission-track results. Three rapid exhumation episodes related to relevant geodynamic events have been identified. Previous 40Ar–39Ar and (U–Th)/He data indicate that the most significant exhumation, induced by the collision between the North and South China Blocks, occurred from c. 237 to 220 Ma after long-term subsidence and sedimentation of the passive continental margin. The second exhumation event, related to the long-distance effect of the Pacific subduction, occurred during the period from c. 126 to 90 Ma. Following the late Cretaceous – Eocene peneplanation stage, the final late Cenozoic exhumation since c. 15 Ma may be attributed to the combined effect of the eastward growth of the Tibetan Plateau uplift and the Asian monsoon.

This work presents a systematic study of zircon and apatite in melt-bearing impactites from the annular trough of the ~180 km and ~66.04 Ma Chicxulub impact crater, Yucatán, Mexico, using in situ laser ablation – inductively coupled plasma mass spectrometry, in which the petrologic context of the analysed minerals was assessed. Geochronologic U–Pb results for variably shocked zircon from the Yaxcopoil-1 core, including monocrystalline grains and neocrystallised granular aggregates, yielded a discordant array of ages representing the Early Palaeozoic age of the crystalline–metamorphic Maya block in the crater basement and the timing of the Chicxulub impact, respectively, and provide evidence for impact-induced resetting of the U–Pb system. Zircon and fluor-chlorapatite from the Yaxcopoil-1 core, and fluorapatite in clasts of impact melt from the Yucatán-6 core have low 206Pb/204Pb, suggesting the presence of detectable common Pb. The Chicxulub impactites were altered in an initially hot hydrothermal system that lasted up to ~2 Myr; locally, Pb-rich sulphides precipitated. Hydrothermal conditions did not reset the U–Th–Pb systematics of relict zircon, however, due to elevated closure temperatures for Pb diffusion at the fast cooling rates associated with the crater locations of the Yucatán-6 and Yaxcopoil-1 boreholes. Thus, the zircon preserves pre-impact and impact-related ages, rather than those of the hydrothermal system. In contrast, no useful geochronologic information was obtained from relict apatite, because common Pb in these grains overwhelmed radiometrically derived isotope ratios.

A blueschist-facies mylonite crops out between two high-pressure tectono-metamorphic oceanic units of the Ligurian Western Alps (NW Italy). This mylonitic metabasite is made up of alternating layers with different grain size and proportions of blueschist-facies minerals.

The mylonitic foliation formed at metamorphic conditions of T = 220–310 °C and P = 6.5–10 kbar. The mylonite shows various superposed structures: (i) intrafoliar and similar folds; (ii) chocolate-tablet foliation boudinage; (iii) veins; (iv) breccia.

The occurrence of comparable mineral assemblages along the foliation, in boudin necks, in veins and in breccia cement suggests that the transition from ductile deformation (folds) to brittle deformation (veining and breccia), passing through a brittle–ductile regime (foliation boudinage), occurred gradually, without a substantial change in mineral assemblage and therefore in the overall P–T metamorphic conditions (blueschist-facies).

A strong fluid–rock interaction was associated with all the deformative events affecting the rock: the mylonite shows an enrichment in incompatible elements (i.e. As and Sb), suggesting an input of fluids, released by adjacent high-pressure metasedimentary rocks, during ductile deformation. The following fracturing was probably enhanced by brittle instabilities arising from strain and pore-fluid pressure partitioning between adjacent domains, without further external fluid input.

Fluids were therefore fixed inside the rock during mylonitization and later released into a dense fracture mesh that allowed them to migrate through the mylonitic horizon close to the plate interface.

We finally propose that the fracture mesh might represent the field evidence of past episodic tremors or ‘slow earthquakes’ triggered by high pore-fluid pressure.

Lithostratigraphic and magnetic-susceptibility logs for four sections in the Blue Lias Formation are combined with a re-assessment of the ammonite biostratigraphy. A Shaw plot correlating the West Somerset coast with the Devon/Dorset coast at Lyme Regis, based on 63 common biohorizon picks, together with field evidence, demonstrate that intra-formational hiatuses are common. Compared to laminated shale deposition, the climate associated with light marl is interpreted as both drier and stormier. Storm-related non-deposition favoured initiation of limestone formation near the sediment–water interface. Areas and time intervals with reduced water depths had lower net accumulation rates and developed a greater proportion of limestone. Many homogeneous limestone beds have no ammonites preserved, whereas others contain abundant fossils. Non-deposition encouraged shallow sub-sea-floor cementation which, if occurring after aragonite dissolution, generated limestones lacking ammonites. Abundant ammonite preservation in limestones required both rapid burial by light marl during storms as well as later storm-related non-deposition and near-surface carbonate cementation that occurred prior to aragonite dissolution. The limestones are dominated by a mixture of early framework-supporting cement that minimized compaction of fossils, plus a later micrograde cement infill. At Lyme Regis, the relatively low net accumulation rate ensured that final cementation of the limestones took place at relatively shallow burial depths. On the West Somerset coast, however, much higher accumulation rates led to deeper burial before final limestone cementation. Consequently, the oxygen-isotope ratios of the limestones on the West Somerset coast, recording precipitation of the later diagenetic calcite at higher temperatures, are lower than those at Lyme Regis.

Olistostromes with calcareous olistoliths are rare components in the Ordovician successions in NW Europe and North America, having been described from only a small number of localities. One of the best exposed, but least known, is in the Garn Formation in coastal outcrops in Anglesey in northwestern Wales. Here, in the graptolite-bearing shales of the Garn Formation, there are numerous limestone olistoliths that are derived from an otherwise unknown ‘ghost’ formation whose original depositional site remains an enigma. These olistoliths contain a Baltoscandian type of conodont fauna that is otherwise unknown in Wales and England. It represents the Baltoniodus variabilis Subzone of the Amorphognathus tvaerensis Zone. Similar, but slightly older, conodont faunas are recorded from olistoliths in the Tweeddale Member of the Shinnel Formation in southern Scotland and in probable olistoliths of the Cobbs Arm Limestone in northeasternmost Newfoundland. Approximately coeval conodont faunas are present in calcareous olistoliths in the Woods Hollow Shale of West Texas and the Womble Shale in the Ouachita Mountains of Arkansas, USA. Lithological and conodont evidence indicates that the calcareous olistoliths were derived from carbonate sediments deposited in relatively shallow water. It is concluded that the study of ‘ghost’ formation olistoliths may provide otherwise unavailable but important data bearing on the marine depositional history of a particular region.

The Cenozoic-age Lower Rhine Basin is located in the NW part of the European Cenozoic Rift System. In Miocene times, a combination of warm climatic conditions and basin subsidence resulted in the deposition of up to 100m of lignite (i.e. Main Seam of the Ville Formation). The Main Seam can be subdivided into the Morken, Frimmersdorf and Garzweiler seams, separated by two intercalated transgressive sand units, namely the Frimmersdorf and Neurath sands, deposited in a shallow-marine, tide-dominated environment. The lignite seams of the Ville Formation are currently worked by RWE Power AG, in the Garzweiler II open-cast mine. In the Frimmersdorf Seam (between the Frimmersdorf Sand and the Neurath Sand), the presence of small-scale sand bodies, together with their variable dimensions, affects the industrial exploitation of the seam. Moreover, their irregular distribution complicates their precise and early recognition. Indeed, so-called barren lignite (≥ 17% of sand) and completely clean units can occur within a few metres of each other. Initial classification of these highly variable sand bodies suggests a variety of both pre- and post-depositional causal mechanisms, providing evidence of an extremely complex depositional and post-depositional system. Syn-depositional sand bodies were deposited in a swamp area that was located in the fluvial-dominated sub-environment of an extended tidal estuary. The post-depositional formation of sand bodies is related to the intrusion of fluidized sands from the underlying Frimmersdorf Sand. These sand injectites within the Frimmersdorf Seam are considered to be linked to seismic activity within the Lower Rhine Basin.

The discovery and dating of a volcanic ash bed within the upper Phosphoria Formation in SE Idaho, USA, is reported. The ash occurs 11 m below the top of the phosphatic Meade Peak Member and yielded a 206Pb/238U date of 260.57 ± 0.07 / 0.14 / 0.31 Ma, i.e. latest Capitanian, Guadalupian. The stratigraphic position of this ash near the top of the Meade Peak phosphatic Member of Phosphoria Formation indicates plausible completeness of the sedimentation within the Guadalupian–Lopingian and probably at the Permo-Triassic (P-T) transitions. The new radiometric age reveals that the regional biostratigraphy and palaeontology of Phosphoria and Park City formations requires serious reconsideration, particularly in cool water conodonts, bryozoans and brachiopods. The new age proposes that the Guadalupian–Lopingian boundary (GLB) coincides with the Meade Peak – Rex contact and consequently with the end-Guadalupian extinction event. The lack of a major unconformity at the P-T transition suggests that the effects of the Sonoma orogeny were not as extensive as has been assumed.

The Chinese Altai is renowned for its rich rare-element resources. Nine representative rare-element (REL) pegmatites were dated using LA-ICP-MS and 40Ar–39Ar methods. The columbite grains yield a weighted mean 206Pb/238U age of 239.6±3.8 Ma for the Dakalasu (Be-Nb-Ta) pegmatite and concordia U–Pb ages of 258.1±3.1 Ma and 262.3±2.5 Ma for the Xiaokalasu (Li-Nb-Ta) pegmatite. The zircons display a weighted mean 206Pb/238U age of 198.5±2.5 Ma for the Husite (Be) pegmatite and concordia U–Pb ages of 194.3±1.6 Ma and 248.2±2.2 Ma for the Qunkuer (Be) and Taerlang (barren) pegmatites. The muscovite 40Ar–39Ar dating gives plateau ages of 286.4±1.6 Ma, 297.0±2.6 Ma, 265.2±1.5 Ma, 178.8±1.0 Ma, 162.2±0.9 Ma, 237.7±1.3 Ma, 237.4±1.2 Ma and 231.9±1.2 Ma for the Talate (Li-Be-Nb-Ta), Baicheng (Nb-Ta), Kangmunagong (barren), Husite (Be), Qunkuer (Be-Nb-Ta), Xiaokalasu (Li-Nb-Ta), Weizigou (Be) and Taerlang (barren) pegmatites, respectively. These new ages coupled with previous geochronological work suggest that the REL pegmatites in the Chinese Altai formed during early Permain – Late Jurassic time. The REL pegmatites located in the Central Altaishan terrane are younger than those in the Qiongkuer–Abagong terrane, showing a correlation with the coeval and adjacent granites. The formation of the REL pegmatites and these granites indicates frequent and strong magmatic activity in the post-orogenic and anorogenic setting. The spatial and temporal distribution of pegmatites and granites reveals a magmatism path from the SE (of age early–middle Permian), to the NW (middle Permian – Middle Triassic) and finally to the central part (Middle Triassic – Jurassic) of the Chinese Altai.

In northern Turkey, the Intra-Pontide suture zone represents one of the first-order tectonic structures located between the Istanbul–Zonguldak and the Sakarya continental terranes. It consists of an E–W-trending assemblage of deformed and variably metamorphosed tectonic units, including sedimentary rocks and ophiolites derived from a Neo-Tethyan oceanic basin, known as the Intra-Pontide oceanic basin. One of these units is represented by the Daday Unit that consists of a block-in-matrix assemblage derived from supra-subduction oceanic crust and related deep-sea sedimentary cover of Middle Jurassic age. This setting was acquired during Late Jurassic time by tectonic underplating at a depth of 35–42 km associated with blueschist-facies metamorphism (D1 phase). The following D2, D3 and D4 phases produced the exhumation of the Daday Unit up to shallower structural levels in a time span running from the Albian to late Paleocene. The high geothermal gradient detected during the D2 phase indicates that the Daday Unit was exhumed during a continent–arc collisional setting. The tectonic structures of the Intra-Pontide suture zone, resulting from the previously described tectonic history, are unconformably sealed by the upper Paleocene – Eocene deposits. This tectonic setting was intensely reworked by the activity of the North Anatolian Fault Zone, producing the present-day geometrical relationships of the Intra-Pontide suture zone of the Central Pontides.

The spatial arrangement of gypsum veins as preserved natural hydraulic fractures have been characterized in the Triassic Keuper Marl Formation (UK), a caprock for hydrocarbon reservoirs and CO2 sequestration. The marls cropping out are subdivided into five discrete fracture units based on the presence and abundance of gypsum veins. The nodular gypsum in evaporite horizons provides excess gypsum for nodule-rooted horizontal gypsum veins. Our petrographic observations demonstrate that the development of gypsum veins in beds lacking macroscopic evaporites is closely associated with disseminated gypsum cement in the marls. We interpret that the gypsum veins in marl are sourced from disseminated gypsum cements in the host rocks, based on stratigraphic correlations, and much lower Sr concentrations than gypsum nodules. Gypsum was transported to adjacent veins mainly through diffusion in the low-permeability marls. The localization of gypsum veins and varied Sr concentrations of veins and nodules indicate that the diagenetic fluids are a mix of connate water with meteoric water rather than brines transported from evaporite beds along faults to non-evaporite beds. This results in the absence of gypsum fillings in fractures in rocks without primary gypsum cements. The study implies that the cementation of natural fractures in low-permeability rocks can highly depend on the presence of cement minerals in the host rock.