Genetic parameters pertaining to the same chemical characteristics of three porcine tissues, that is backfat (BF), perirenal fat (PF) and longissimus muscle (LM), were estimated in centrally tested Large White and Landrace pigs. Animals were fed ad libitum. They were slaughtered at an average BW of 99.6 kg, and samples of BF (both inner and outer layers) and LM were removed at the 13th to 14th rib level of the carcass on the day after slaughter. The data set included 2483 animals recorded for average daily gain (ADG; 35 to 100 kg), estimated carcass lean percentage (LEAN) and lean tissue growth rate (LTGR). Among these animals, around 950 pigs were recorded for lipid content (L%) and water content (W%) of BF and LM and for fatty acid composition (FAC) of BF, whereas FAC of LM was measured on 297 pigs and L%, W%, and FAC of PF on around 210 pigs. Heritabilities (h2) and genetic correlations (ra) were estimated using REML-animal model methodology. Estimates of h2 for L%, W% and FAC of BF, PF and LM were of moderate-to-high magnitude: for example 0.47 ± 0.09 for L% of LM, 0.59 ± 0.11 for W% of BF, 0.45 ± 0.08 for the ratio of polyunsaturated to saturated fatty acids (P/S) of BF, 0.61 ± 0.15 and 0.29 ± 0.10 for the coefficient of unsaturation of lipids (UNSAT, average number of double bonds of unsaturated fatty acids) of PF and LM, respectively. Genetic correlations of L% with P/S or UNSAT were strongly negative (from −0.4 to −0.9) in BF and LM, but not in PF. The ‘between-tissue’ genetic correlations for homologous compositional traits were far from being unity (e.g. ra = 0.57 ± 0.05 ‘between’ BF and PF for UNSAT). Genetic relationships between ADG and tissue compositional traits were globally weak. By contrast, genetic correlations were moderate-to-high between carcass leanness and tissue compositional traits, especially those of fat depots: for example −0.66 ± 0.14 between LEAN and L% of BF, 0.50 ± 0.07 between LEAN and UNSAT of PF, −0.44 ± 0.08 between LEAN and L% of LM, and 0.27 ± 0.03 between LEAN and UNSAT of LM. On the basis of the parameter estimates found here, breeding for higher LTGR is expected to increase the ratio of water to lipids and the unsaturation degree of lipids in subcutaneous BF and, to a lesser extent, in PF. Tissue composition and FAC of LM would be less affected.

Foods derived from animals are an important source of nutrients in the diet but there is considerable uncertainty about whether or not these foods contribute to increased risk of various chronic diseases. For milk in particular there appears to be an enormous mismatch between both the advice given on milk/dairy foods items by various authorities and public perceptions of harm from the consumption of milk and dairy products, and the evidence from long-term prospective cohort studies. Such studies provide convincing evidence that increased consumption of milk can lead to reductions in the risk of vascular disease and possibly some cancers and of an overall survival advantage from the consumption of milk, although the relative effect of milk products is unclear. Accordingly, simply reducing milk consumption in order to reduce saturated fatty acid (SFA) intake is not likely to produce benefits overall though the production of dairy products with reduced SFA contents is likely to be helpful. For red meat there is no evidence of increased risk of vascular diseases though processed meat appears to increase the risk substantially. There is still conflicting and inconsistent evidence on the relationship between consumption of red meat and the development of colorectal cancer, but this topic should not be ignored. Likewise, the role of poultry meat and its products as sources of dietary fat and fatty acids is not fully clear. There is concern about the likely increase in the prevalence of dementia but there are few data on the possible benefits or risks from milk and meat consumption. The future role of animal nutrition in creating foods closer to the optimum composition for long-term human health will be increasingly important. Overall, the case for increased milk consumption seems convincing, although the case for high-fat dairy products and red meat is not. Processed meat products do seem to have negative effects on long-term health and although more research is required, these effects do need to be put into the context of other risk factors to long-term health such as obesity, smoking and alcohol consumption.

Appetite control is a major issue in normal growth and in suboptimal growth performance settings. A number of hormones, in particular leptin, activate or inhibit orexigenic or anorexigenic neurotransmitters within the arcuate nucleus of the hypothalamus, where feed intake regulation is integrated. Examples of appetite regulatory neurotransmitters are the stimulatory neurotransmitters neuropeptide Y (NPY), agouti-related protein (AgRP), orexin and melanin-concentrating hormone and the inhibitory neurotransmitter, melanocyte-stimulating hormone (MSH). Examination of messenger RNA (using in situ hybridization and real-time PCR) and proteins (using immunohistochemistry) for these neurotransmitters in ruminants has indicated that physiological regulation occurs in response to fasting for several of these critical genes and proteins, especially AgRP and NPY. Moreover, intracerebroventricular injection of each of the four stimulatory neurotransmitters can increase feed intake in sheep and may also regulate either growth hormone, luteinizing hormone, cortisol or other hormones. In contrast, both leptin and MSH are inhibitory to feed intake in ruminants. Interestingly, the natural melanocortin-4 receptor (MC4R) antagonist, AgRP, as well as NPY can prevent the inhibition of feed intake after injection of endotoxin (to model disease suppression of appetite). Thus, knowledge of the mechanisms regulating feed intake in the hypothalamus may lead to mechanisms to increase feed intake in normal growing animals and prevent the wasting effects of severe disease in animals.

Sensory traits, such as juiciness and tenderness, are known to be important to the consumer and thus will influence their consumption of meat, specifically beef. These traits are difficult to measure and often require the use of taste panels to assess the complex parameters involved in the eating experience. Such panels are potentially a large source of measurement error, which may reduce the effectiveness of breeding programmes based on the data they generate. The aim of this study was to assess the quality of such taste panel-derived sensory traits as well as calculating genetic parameters and residual correlations for these traits along with a further set of traditional carcass quality traits. The study examined a sample of 443 Aberdeen Angus-cross animals collected from 14 breeder–finisher farms throughout Scotland. To assess the quality of the taste panel measurements, three consistency statistics were calculated: (i) panel-member consistency, i.e. the extent to which an individual panel member varied in their scoring for a given trait over the period of the experiment; (ii) repeatability, i.e. the consistency with which an individual panel member was able to score a trait on repeated samples from the same animal; and (iii) reproducibility, i.e. the extent to which taste panel members agreed with each other when scoring a trait. These consistency statistics were moderately high, particularly for panel-member consistency and reproducibility, with values ranging from 0.48 to 0.81 and 0.43 to 0.73 respectively. Estimated heritabilities were low for most of the sensory taste-panel-evaluated traits where the maximum value was 0.16 for overall liking. Residual correlations were high between many of the closely related sensory traits, although few significant correlations were found between the carcass quality data and meat quality traits.

Animal breeding faces one of the most significant changes of the past decades – the implementation of genomic selection. Genomic selection uses dense marker maps to predict the breeding value of animals with reported accuracies that are up to 0.31 higher than those of pedigree indexes, without the need to phenotype the animals themselves, or close relatives thereof. The basic principle is that because of the high marker density, each quantitative trait loci (QTL) is in linkage disequilibrium (LD) with at least one nearby marker. The process involves putting a reference population together of animals with known phenotypes and genotypes to estimate the marker effects. Marker effects have been estimated with several different methods that generally aim at reducing the dimensions of the marker data. Nearly all reported models only included additive effects. Once the marker effects are estimated, breeding values of young selection candidates can be predicted with reported accuracies up to 0.85. Although results from simulation studies suggest that different models may yield more accurate genomic estimated breeding values (GEBVs) for different traits, depending on the underlying QTL distribution of the trait, there is so far only little evidence from studies based on real data to support this. The accuracy of genomic predictions strongly depends on characteristics of the reference populations, such as number of animals, number of markers, and the heritability of the recorded phenotype. Another important factor is the relationship between animals in the reference population and the evaluated animals. The breakup of LD between markers and QTL across generations advocates frequent re-estimation of marker effects to maintain the accuracy of GEBVs at an acceptable level. Therefore, at low frequencies of re-estimating marker effects, it becomes more important that the model that estimates the marker effects capitalizes on LD information that is persistent across generations.

The short-tailed sheep, native of an area stretching from Russia to Iceland, are generally considered a primitive type. These robust northern sheep seem to have been spread by Norse vikings to several countries in this area from the late eighth century to the middle of the eleventh century ad. They have several common characteristics in addition to the fluke-shaped and tapered short tail, such as a wide range of colour patterns, dual-coated wool and the ability to thrive under harsh environmental conditions, often in isolated marginal areas. While 34 short-tailed breeds of North European origin can still be identified, it is clear that their population sizes have declined in most cases and several of them are now rare and endangered. Although these breeds have mainly been confined to certain localities, some of them have gained considerable distribution due to their genetic merits, such as prolificacy. Of these, the Finnsheep and the Romanov are best known being exported to several countries in the world where their genetic material has been utilized through crossbreeding with local sheep. This has resulted in the production of some new synthetic breeds. Meat is now generally the main product of the North European short-tailed breeds and their crossbreds, whereas wool, skins and milk are normally regarded as byproducts, yet of considerable economic importance in some cases. Such breeds have clearly a role to play in sustainable grassland-based production systems in the future.

At calving, purebred animals of the Belgian Blue (BB) breed are compromised by the incompatibility in size and shape of the dam and her calf, resulting in a very high incidence of dystocia problems. To clarify which body parts of the calf are of decisive importance to allow natural delivery and to investigate both the mean value as well as the variation among these body sizes within this breed (variation being an important condition for selection), measurements of nine body parts (body weight at birth (BW), body length (BL), length of the head (LH), shoulder width (SW), hip width (HW), heart girth (HG), withers height (WH) and the circumference of the fetlock of both the front (CFF) and the hind leg (CFH)) were assessed in 147 newborn purebred BB calves on 17 farms. Simple and partial correlations were assessed and we examined whether environmental factors (gender of the calf, parity of the cow, type of calving, season of birth and time of measurement after birth) were significantly associated with these specific calf measurements. The mean BW was 49.2 ± 7.1 kg. The average BL was 56.4 ± 4.5 cm and the mean LH was 24.4 ± 2.3 cm. Measurements obtained for SW and HW were 22.4 ± 2.2 and 22.9 ± 2.1 cm, respectively, whereas the mean WH was 71.1 ± 4.7 cm. Measurements of circumferences revealed a CFF of 17.9 ± 1.1 cm, a CFH of 18.0 ± 1.0 cm and a mean HG of 78.0 ± 5.4 cm. Partial correlations of the BW with eight body measurements were significant (P < 0.01) and ranged between 0.17 and 0.85; 0.42 and 0.88; and 0.24 and 0.88 when corrected for gender, parity and type of calving, respectively. BL (P < 0.01) and the CFF and CFH (P < 0.001) are larger in bull calves than in heifer calves. Calves born through caesarean section had broader SW (P < 0.01) and HW (P < 0.01) when compared with calves born after natural calving (defined as born per vaginam without assistance or with slight traction). Sizes of calves born out of multiparous cows were generally larger than of calves born out of heifers (SW: P < 0.001; HW: P < 0.05). As SW and HW are the broadest points of a BB calf, they are both candidates for being the limiting measures for calving ease, but the difference between HW and SW for the total data set was not different from zero (P > 0.05). In contrast to male calves in which no significant difference (between HW and SW) could be found, female calves show the difference between HW and SW that was significantly different from zero (P < 0.001); thus, in female calves, the HW is the most limiting factor of the calf’s body. The significant variation in some body measures between the calves and the strong correlation within these sizes raises the possibility of selection towards smaller calves aiming to limit the dystocia problem in the BB breed. Furthermore, on the basis of our results, we were able to build equations for the farmer to use at the moment of calving containing the LH, the CF and the calf’s gender to estimate SW and HW, the limiting body parts of the calf to be born naturally. Together with the knowledge of the pelvic size of the dam, this information gives the obstetrician or the farmer a more accurate prediction of the probability of natural calving at parturition.

The significance of hepatocyte nuclear factors (HNFs) in β-cell development and function has been generally recognized in humans, as evidenced by their associations with cases of maturity onset diabetes of the young (MODY). Common Hepatocyte nuclear factor-1 alpha (HNF1A), Hepatocyte nuclear factor-1 beta (HNF1B) and Hepatocyte nuclear factor-4 alpha (HNF4A) mutations could lead to monogenic forms 3, 5 and 1 of diabetes mellitus, respectively, and were characterized by MODY in humans. In this study, multiple variants were discovered in the porcine HNF1A and HNF4A genes, and one single-nucleotide polymorphism (SNP) was detected in the HNF1B gene. Using the Iowa State University Berkshire × Yorkshire pig resource population, the HNF1A, HNF1B and HNF4A genes were mapped on chromosomes 14, 12 and 17, respectively. The linkage disequilibrium (LD) analyses indicated that most of the HNF1A variants were not in strong LD with each other; however, nearly all of them were highly significantly (P < 0.01) associated with loin muscle area (LMA). The SNPs c.327-19G>T and c.1768+40_23del were significantly (P < 0.05) associated with backfat and total lipid percentage, and the latter was also associated with muscle glycogen metabolism measures. Four major haplotypes were observed and the association analyses suggested that haplotype 3 (-CGCGD-, I indicates Insertion and D indicates Deletion) was favorable for reduced backfat, while haplotype 1 (-CACGI-) was unfavorably associated with backfat and LMA. There was no significant interaction effect on backfat among the SNPs c.327-19G>T, c.1768+40_23del of the HNF1A gene and c.646C>T of the transcription factor-7-like 2 (TCF7L2) gene. These findings suggest that the HNF1A gene has significant effects on both fatness- and meat production-related traits. No significant associations with production traits with the SNPs from the HNF1B and HNF4A genes were observed in the study.

Hair fibre is regarded as a unique mammalian feature with an important role for endothermy. Artificial selection for hair characteristics resulted in marked changes with regard to follicle number, type, distribution, growth and natural shedding. This review focuses on the fine fibre-producing South American camelids (SACs) and the relationship between their hair coat and thermoregulation. SACs have developed several special integumental characteristics. While the hair coat of the wild lamoids vicuña (Vicugna vicugna) and guanaco (Lama guanicoe) is formed by two types of hair (the coarse outer guard hairs and a finer undercoat), the domesticated llamas (Lama glama) and alpaca (Lama pacos) exhibit variably double coat and predominantly single coat, respectively. The distribution of the hair coat across the body is not homogenous. Thermal windows with shorter hair or thinner skin can be identified at the ventral abdomen, axillary space and inside of the thighs (about 20% of the skin), thus allowing to modulate heat dissipation. In contrast to sheep wool, lamoid fibres are mainly medullated. The thermal conductance of summer pelage was higher than that of the winter fleece and highest for the axillar and lower flanks. Lamoids have developed behavioural strategies to modify heat loss by adopting specific postures according to ambient conditions by closing or opening the thermal windows. Energy savings of 67% attributed to posture were calculated. SACs have shown to be able to adapt to a broad range of different climatic conditions. The specific integumental characteristics of SACs indicate that they have developed adaptation mechanisms particularly suited for cooler climates. Accordingly, hyperthermia might become a problem in hot, humid areas outside of their original habitat. Several studies showed the beneficial effect of shearing against heat stress. In particular, fertility in males exposed to heat stress may be improved by shearing. Infrared thermography reveals that in shorn animals the heat is radiated across the entire body surface and is not restricted to the thermal windows. However, shearing also changes the conditions of the protective layer, resulting in a loss of thermal conductance that may result in adverse effects when animals are kept under cold temperatures. The length of residual fibre appears to be crucial in avoiding excessive heat loss in a cold environment, as demonstrated by shearing experiments with different shearing machines. There is, therefore, potential for welfare considerations to conflict with industrial demands for fibre length or homogenous quality.

Microarray technology is a powerful tool for animal functional genomics studies, with applications spanning from gene identification and mapping, to function and control of gene expression. Microarray assays, however, are complex and costly, and hence generally performed with relatively small number of animals. Nevertheless, they generate data sets of unprecedented complexity and dimensionality. Therefore, such trials require careful planning and experimental design, in addition to tailored statistical and computational tools for their appropriate data mining. In this review, we discuss experimental design and data analysis strategies, which incorporate prior genomic and biological knowledge, such as genotypes and gene function and pathway membership. We focus the discussion on the design of genetical genomics studies, and on significance testing for detection of differential expression. It is shown that the use of prior biological information can improve the efficiency of microarray experiments.

In order to assess the relative importance of genomic imprinting for the genetic variation of traits economically relevant for pork production, a data set containing 21 209 records from Large White pigs was analysed. A total of 33 traits for growth, carcass composition and meat quality were investigated. All traits were recorded between 1997 and 2006 at a test station in Switzerland and the pedigree included 15 747 ancestors. A model with two genetic effects for each animal was applied: the first corresponds to a paternal and the second to a maternal expression pattern of imprinted genes. The imprinting variance was estimated as the sum of both corresponding genetic variances per animal minus twice the covariance. The null hypothesis of no imprinting was tested by a restricted maximum likelihood ratio test with two degrees of freedom. Genomic imprinting significantly contributed to the genetic variance of 19 traits. The proportion of the total additive genetic variance that could be attributed to genomic imprinting was of the order between 5% and 19%.

Comparative physiology applies methods established in domestic animal science to a wider variety of species. This can lead to improved insight into evolutionary adaptations of domestic animals, by putting domestic species into a broader context. Examples include the variety of responses to seasonally fluctuating environments, different adaptations to heat and drought, and in particular adaptations to herbivory and various herbivore niches. Herbivores generally face the challenge that a high food intake compromises digestive efficiency (by reducing ingesta retention time and time available for selective feeding and for food comminution), and a variety of digestive strategies have evolved in response. Ruminants are very successful herbivores. They benefit from potential advantages of a forestomach without being constrained in their food intake as much as other foregut fermenters, because of their peculiar reticuloruminal sorting mechanism that retains food requiring further digestion but clears the forestomach of already digested material; the same mechanism also optimises food comminution. Wild ruminants vary widely in the degree to which their rumen contents ‘stratify’, with little stratification in ‘moose-type’ ruminants (which are mostly restricted to a browse niche) and a high degree of stratification into gas, particle and fluid layers in ‘cattle-type’ ruminants (which are more flexible as intermediate feeders and grazers). Yet all ruminants uniformly achieve efficient selective particle retention, suggesting that functions other than particle retention played an important role in the evolution of stratification-enhancing adaptations. One interesting emerging hypothesis is that the high fluid turnover observed in ‘cattle-type’ ruminants – which is a prerequisite for stratification – is an adaptation that not only leads to a shift of the sorting mechanism from the reticulum to the whole reticulo-rumen, but also optimises the harvest of microbial protein from the forestomach. Although potential benefits of this adaptation have not been quantified, the evidence for convergent evolution toward stratification suggests that they must be substantial. In modern production systems, the main way in which humans influence the efficiency of energy uptake is by manipulating diet quality. Selective breeding for conversion efficiency has resulted in notable differences between wild and domestic animals. With increased knowledge on the relevance of individual factors, that is fluid throughput through the reticulo-rumen, more specific selection parameters for breeding could be defined to increase productivity of domestic ruminants by continuing certain evolutionary trajectories.

Livestock contribute directly (i.e. as methane and nitrous oxide (N2O)) to about 9% of global anthropogenic greenhouse gas (GHG) emissions and around 3% of UK emissions. If all parts of the livestock production lifecycle are included (fossil fuels used to produce mineral fertilizers used in feed production and N2O emissions from fertilizer use; methane release from the breakdown of fertilizers and from animal manure; land-use changes for feed production and for grazing; land degradation; fossil fuel use during feed and animal production; fossil fuel use in production and transport of processed and refrigerated animal products), livestock are estimated to account for 18% of global anthropogenic emissions, but less than 8% in the UK. In terms of GHG emissions per unit of livestock product, monogastric livestock are more efficient than ruminants; thus in the UK, while sheep and cattle accounted for 32% of meat production in 2006, they accounted for ∼48% of GHG emissions associated with meat production. More efficient management of grazing lands and of manure can have a direct impact in decreasing emissions. Improving efficiency of livestock production through better breeding, health interventions or improving fertility can also decrease GHG emissions through decreasing the number of livestock required per unit product. Increasing the energy density of the diet has a dual effect, decreasing both direct emissions and the numbers of livestock per unit product, but, as the demands for food increase in response to increasing human population and a better diet in some developing countries, there is increasing competition for land for food v. energy-dense feed crops. Recalculating efficiencies of energy and protein production on the basis of human-edible food produced per unit of human-edible feed consumed gave higher efficiencies for ruminants than for monogastric animals. The policy community thus have difficult decisions to make in balancing the negative contribution of livestock to the environment against the positive benefit in terms of food security. The animal science community have a responsibility to provide an evidence base which is objective and holistic with respect to these two competing challenges.

Malic enzyme 1 plays a fundamental role in lipid metabolism because it yields a significant amount of the NADPH necessary for fatty acid biosynthesis. In ruminants, however, its contribution to this biochemical process seems to be less relevant than in other livestock species. In this study, we have partially sequenced the goat ME1 gene with the aim of identifying polymorphic sites. Structural analysis of the goat ME1 amino acid partial sequence evidenced the existence of two dinucleotide-binding motifs, located at positions 158 to 163 (GLGDLG) and 301 to 306 (GAGEAA), and three amino acid residues (E245, D246 and D269) involved in the binding of Mn2+ and strongly conserved among mammalian species. Moreover, multiple sequence alignment allowed us to identify four single nucleotide polymorphisms at exons 5 (c.483C > T), 6 (c.667G > A), 9 (c.927C > T) and 11 (c.1200G > A). The effects of ME1 genotype on milk production and composition traits were investigated in a Murciano–Granadina goat population. None of the associations found reached statistical significance after applying Benjamini–Hochberg correction. At most, associations with uncorrected P-values below 0.01 were observed for C16:0, C18:1n-9t and total conjugated linoleic acids. These negative results reinforce the notion that ME1 plays an ancillary role in ruminant lipogenesis.

In livestock populations, missing genotypes on a large proportion of the animals is a major problem when implementing gene-assisted breeding value estimation for genes with known effect. The objective of this study was to compare different methods to deal with missing genotypes on accuracy of gene-assisted breeding value estimation for identified bi-allelic genes using Monte Carlo simulation. A nested full-sib half-sib structure was simulated with a mixed inheritance model with one bi-allelic quantitative trait loci (QTL) and a polygenic effect due to infinite number of polygenes. The effect of the QTL was included in gene-assisted BLUP either by random regression on predicted gene content, i.e. the number of positive alleles, or including haplotype effects in the model with an inverse IBD matrix to account for identity-by-descent relationships between haplotypes using linkage analysis information (IBD–LA). The inverse IBD matrix was constructed using segregation indicator probabilities obtained from multiple marker iterative peeling. Gene contents for unknown genotypes were predicted using either multiple marker iterative peeling or mixed model methodology. For both methods, gene-assisted breeding value estimation increased accuracies of total estimated breeding value (EBV) with 0% to 22% for genotyped animals in comparison to conventional breeding value estimation. For animals that were not genotyped, the increase in accuracy was much lower (0% to 5%), but still substantial when the heritability was 0.1 and when the QTL explained at least 15% of the genetic variance. Regression on predicted gene content yielded higher accuracies than IBD–LA. Allele substitution effects were, however, overestimated, especially when only sires and males in the last generation were genotyped. For juveniles without phenotypic records and traits measured only on females, the superiority of regression on gene content over IBD–LA was larger than when all animals had phenotypes. Missing gene contents were predicted with higher accuracy using multiple-marker iterative peeling than with using mixed model methodology, but the difference in accuracy of total EBV was negligible and mixed model methodology was computationally much faster than multiple iterative peeling. For large livestock populations it can be concluded that gene-assisted breeding value estimation can be practically best performed by regression on gene contents, using mixed model methodology to predict missing marker genotypes, combining phenotypic information of genotyped and ungenotyped animals in one evaluation. This technique would be, in principle, also feasible for genomic selection. It is expected that genomic selection for ungenotyped animals using predicted single nucleotide polymorphism gene contents might be beneficial especially for low heritable traits.

In response to environmental threats, numerous indicators have been developed to assess the impact of livestock farming systems on the environment. Some of them, notably those based on management practices have been reported to have low accuracy. This paper reports the results of a study aimed at assessing whether accuracy can be increased at a reasonable cost by mixing individual indicators into models. We focused on proxy indicators representing an alternative to the direct impact measurement on two grassland bird species, the lapwing Vanellus vanellus and the redshank Tringa totanus. Models were developed using stepwise selection procedures or Bayesian model averaging (BMA). Sensitivity, specificity, and probability of correctly ranking fields (area under the curve, AUC) were estimated for each individual indicator or model from observational data measured on 252 grazed plots during 2 years. The cost of implementation of each model was computed as a function of the number and types of input variables. Among all management indicators, 50% had an AUC lower than or equal to 0.50 and thus were not better than a random decision. Independently of the statistical procedure, models combining management indicators were always more accurate than individual indicators for lapwings only. In redshanks, models based either on BMA or some selection procedures were non-informative. Higher accuracy could be reached, for both species, with model mixing management and habitat indicators. However, this increase in accuracy was also associated with an increase in model cost. Models derived by BMA were more expensive and slightly less accurate than those derived with selection procedures. Analysing trade-offs between accuracy and cost of indicators opens promising application perspectives as time consuming and expensive indicators are likely to be of low practical utility.