AASHTO LRFD (1998). AASHTO LRFD Bridge Design Specifications. 2nd edition, American Association of State Highway and Transportation Officials, Washington DC.
AASHTO LRFD (2008). AASHTO LRFD Bridge Design Specifications. 4th edition – 2008 Interim Revisions, American Association of State Highway and Transportation Officials, Washington DC.
ACI 318-1995 (1995). Building Code Requirements for Structural Concrete. American Concrete Institute, Farmington Hills.
ACI 318-2002 (2002). Building Code Requirements for Structural Concrete. American Concrete Institute, Farmington Hills.
ACI 318-2005 (2005). Building Code Requirements for Structural Concrete. American Concrete Institute, Farmington Hills.
ACI 318-2008 (2008). Building Code Requirements for Structural Concrete. American Concrete Institute, Farmington Hills.
ACI 318-2011 (2011). Building Code Requirements for Structural Concrete. American Concrete Institute, Farmington Hills.
Alcocer, SM and Uribe, CM (2008). Monolithic and cyclic behaviour of deep beams designed using strut-and-tie models. ACI Structural Journal 105(3):327–337.
Ali, MA and White, RN (2001). Automatic generation of truss model for optimal design of reinforced concrete structures. ACI Structural Journal 98(4):431–442.
Arabzadeh, A, Rahaie, AR and Aghayari, R (2009). A simple strut-and-tie model for prediction of ultimate shear strength of RC deep beams. International Journal of Civil Engineering 7(3):141–153.
AS 1012.9-1999 (1999). Determination of the Compressive Strength of Concrete Specimens. Standards Australia, North Sydney.
AS 1012.10-2000 (2000). Determination of Indirect Tensile Strength of Concrete Cylinders (‘Brazil’ or Splitting Test). Standards Australia International Ltd, Strathfield.
AS 1012.11-2000 (2000). Determination of the Modulus of Rupture. Standards Australia International Ltd, Strathfield.
AS 1012.12.1-1998 (1998). Determination of Mass per Unit Volume of Hardened Concrete – Rapid Measuring Method. Standards Australia, North Sydney.
AS 1012.12.2-1998 (1998). Determination of Mass per Unit Volume of Hardened Concrete – Water Displacement Method. Standards Australia, North Sydney.
AS 1012.17-1997 (1997). Determination of the Static Chord Modulus of Elasticity and Poisson’s Ratio of Concrete Specimens. Standards Australia, North Sydney.
AS 1379-2007 (2007). Specification and Supply of Concrete. Standards Australia International Ltd, Sydney.
AS 1480-1982 (1982). SAA Concrete Structures Code. Standards Association of Australia, North Sydney.
AS 1481-1978 (1978). SAA Prestressed Concrete Code. Standards Association of Australia, North Sydney.
AS 3600-1988 (1988). Concrete Structures. Standards Australia, Sydney.
AS 3600-1994 (1994). Concrete Structures. Standards Australia, Sydney.
AS 3600-2001 (2001). Concrete Structures. Standards Australia International Ltd, Sydney.
AS 3600-2009 (2009). Concrete Structures. Standards Australia International Ltd, Sydney.
AS 3735-2001 (2001). Concrete Structures for Retaining Liquids. Standards Australia International Ltd, Sydney.
AS 4678-2002 (2002). Earth-Retaining Structures. Standards Australia, Sydney.
AS 5100.5-2004 (2004). Bridge Design Part 5: Concrete. Standards Australia International Ltd, Sydney.
AS/NZS 1170.0-2002 (2002). Structural Design Actions Part 0: General Principles. Standards Australia, Sydney and Standards New Zealand, Wellington.
AS/NZS 1170.1-2002 (2002). Structural Design Actions Part 1: Permanent, Imposed and Other Actions. Standards Australia, Sydney and Standards New Zealand, Wellington.
AS/NZS 4671-2001 (2001). Steel Reinforcing Materials. Standards Australia International Ltd, Sydney and Standards New Zealand, Wellington.
AS/NZS 4672.1-2007 (2007). Steel Prestressing Materials Part 1: General Requirements. Standards Australia International Ltd, Sydney and Standards New Zealand, Wellington.
Bakir, PG and Boduroglu, HM (2005). Mechanical behaviour and non-linear analysis of short beams using softened truss and direct strut & tie models. Engineering Structures 27:639–651.
BCA (Building Code of Australia) (2011). Building Code of Australia, Australian Building Codes Board, Canberra.
Bowles, JE (1996). Foundation Analysis and Design. 5th edition, McGraw-Hill, New York.
Bridge, RO and Smith, RG (1983). The assessment of the ultimate strain of concrete. Proceedings, Symposium on Concrete 1983. The Institution of Engineers, Australia: 75–82.
Brown, MD and Bayrak, O (2006). Minimum transverse reinforcement for bottle-shaped struts. ACI Structural Journal 103(6):813–821.
Brown, MD and Bayrak, O (2007). Investigation of deep beams with various load configurations. ACI Structural Journal 104(5):611–620.
Brown, MD and Bayrak, O (2008a). Design of deep beams using strut-and-tie models – Part I: Evaluating US provisions. ACI Structural Journal 105(4):395–404.
Brown, MD and Bayrak, O (2008b). Design of deep beams using strut-and-tie models – Part II: Design recommendations. ACI Structural Journal 105(4):405–413.
BS 8007-1987 (1987). Code of Practice for Design of Concrete Structures for Retaining Aqueous Liquids. British Standards Institution, London.
BS 8110-1985 (1985). Structural Use of Concrete Part 2. Code of Practice for Special Circumstances. British Standards Institution, London.
BS 8110-1997 (1997). Part 1: Structural Use of Concrete, Code of Practice for Design and Construction. British Standards Institution, London.
Bruggi, M (2009). Generating strut-and-tie patterns for reinforced concrete structures using topology optimization. Computers and Structures 87:1483–1495.
CCAA (Cement Concrete & Aggregates Australia) (2010). Fire Safety of Concrete Buildings. Cement Concrete & Aggregates Australia, Sydney.
CEB (Comite Euro-International du Beton) (1978). CEB-FIP Model Code for Concrete Structures. English edition, Cement and Concrete Association, London.
Chi, M and Kirstein, AF (1958). Flexural cracks in reinforced concrete beams. ACI Journal Proceedings 54 (April):865–878.
Chowdhury, SH and Loo, YC (2001). A new formula for prediction of crack widths in reinforced and partially prestressed concrete beams. Advances in Structural Engineering 4(2):101–110.
Chowdhury, SH and Loo, YC (2002). Crack width predictions of concrete beams – New formulas and comparative study. In: Proceedings of the 17th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 17), Gold Coast, 12–14 June 2002, 157–162.
Chowdhury, SH and Loo, YC (2006). Damping in high strength concrete beams – Prediction and comparison. In: Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 19), Christchurch, 29 November–1 December 2006, 631–636.
Chowdhury, SH, Loo, YC and Fragomeni, S (2000). Damping formulae for reinforced and partially prestressed concrete beams. Advances in Structural Engineering 3(4):327–335.
Chun, S-C and Hong, S-G (2009). Strut-and-tie models for headed bar development in C-C-T nodes. ACI Structural Journal 106(2):123–131.
CIA (Concrete Institute of Australia) (2010). Reinforcement Detailing Handbook. Concrete Institute of Australia, Rhodes.
Clark, AP (1956). Cracking in reinforced concrete flexural members. ACI Journal Proceedings 52 (April):851–862.
CP 114 (1969). Structural Use of Reinforced Concrete in Buildings. British Standard Code of Practice, London.
CSA A23.3 (1994) Design of Concrete Structures, Canadian Standards Association, Rexdale.
Cusens, AR and Pama, RP (1975). Bridge Deck Analysis. John Wiley & Sons, London.
Darval, PL and Brown, HP (1976). Fundamental of Reinforced Concrete Analysis and Design. Macmillan, Melbourne.
Doh, JH and Fragomeni, S (2004). Evaluation of experimental work on concrete walls in one- and two-way action. Australian Journal of Structural Engineering 6(1):37–52.
Elia, G, Palmisano, F, Vitone, A and Vitone, C (2002). An interactive procedure to design strut and tie models in reinforced concrete structures using the ‘evolutionary structural optimisation’ method. Engineering Design Optimization. Product and Process Improvement, Gosling, P. (ed.), Newcastle, University of Newcastle-upon-Tyne: 60–66.
Eurocode 2 (EC2): ENV 1992–1-1 (1992). Design of Concrete Structures, Part 1: General Rules and Rules for Buildings. European Prestandard.
Eurocode 2 (EC2): BS EN 1992–1-1 (2004). Design of Concrete Structures: General Rules and Rules for Buildings. BSI, London.
Falamaki, M and Loo, YC (1992). Punching shear tests of half-scale reinforced concrete flat plate models with spandrel beams. American Concrete Institute Structural Journal 89(3):263–271.
Fu, CC (2001). The strut-and-tie model of concrete structures. The Bridge Engineering Software & Technology (BEST) Centre, University of Maryland, presented to the Maryland State Highway Administration, Baltimore, 21 August 2001.
Garda, V, Guan, H and Loo, YC (2006). Prediction of punching shear failure behaviour of slab-edge column connections with varying size and location of openings. In: Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials (ACMSM 19), Christchurch, 29 November–1 December 2006, 651–657.
Gilbert, Rl (2008). Revisiting the tension stiffening effect in reinforced concrete slabs. Australian Journal of Structural Engineering 8(3):189–196.
Gilbert, RI and Mickleborough, NC (1990). Design of Prestressed Concrete. Unwin Hyman, London.
Guan, H (2009). Prediction of punching shear failure behaviour of slab-edge column connections with varying opening and column parameters. Advances in Structural Engineering 12(1):19–36.
Guan, H, Chen, YJ, Loo, YC, Xie, YM and Steven, GP (2003). Bridge topology optimisation with stress, displacement and frequency constraints. Computers and Structures 81:131–145.
Guan, H and Doh, JH (2007). Development of strut-and-tie model in deep beams with web openings. Advances in Structural Engineering 10(6):697–711.
Guan, H, Eurviriyanukul, S and Loo, YC (2006). Strut-and-tie models of deep beams influenced by size and location of web openings – An optimization approach. In: Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-10), Bangkok, 3–5 August 2006, 143–148.
Guan, H and Loo, YC (1997). Layered finite element method in cracking and failure analysis of RC beams and beam-column-slab connections. Structural Engineering and Mechanics 5(1):645–662.
Guan, H and Loo, YC (2003). Failure analysis of column-slab connections with stud shear reinforcement. Canadian Journal of Civil Engineering 30:934–944.
HB71–2002 (2002). Reinforced Concrete Design in Accordance with AS 3600–2001. Standards Australia, Sydney.
Hognestad, E (1962). High strength bars as concrete reinforcement – Part 2: Control of flexural cracking. Journal of the PCA Research and Development Laboratories 4(1): 46–63.
Hong, SG, Chun, SC, Lee, SH and Oh, B. (2007). Strut-and-tie model for development of headed bars in exterior beam-column joint. ACI Structural Journal 104(5):590–600.
Hsu, TTC (1988). Softened truss model theory for shear and torsion. ACI Structural Journal 85(6):552–561.
Hsu, TTC (1993). Unified Theory of Reinforced Concrete. CRC Press, Boca Raton, 1993.
Hwang, SJ, Yu, HW and Lee, HJ (2000). Theory of interface shear capacity of reinforced concrete. Journal of Structural Engineering 126(6):700–707.
Kaar, PH and Mattock, AH (1963). High strength bars as concrete reinforcement – Part 4: Control of cracking. Journal of the PCA Research and Development Laboratories 5(1):15–38.
Kong, FK and Evans, RH (1987). Reinforced and Prestressed Concrete. 3rd edition, E & FN Spon, London.
Kuchma, D, Yindeesuk, S, Nagle, T, Hart, J and Lee, HH (2008). Experimental validation of strut-and-tie method for complex regions. ACI Structural Journal 105(5):578–589.
Kwak, H-G and Noh, S-H (2006). Determination of strut-and-tie models using evolutionary structural optimization. Engineering Structures 28:1440–1449.
Lei, IM (1983). Size effects in model studies of concrete in torsion. MEng thesis, Asian Institute of Technology, Bangkok.
Leu, LJ, Huang, CW, Chen, CS and Liao, YP (2006). Strut-and-tie methodology for three-dimensional reinforced concrete structure. Journal of Structural Engineering 132(6):929–938.
Ley, MT, Riding, KA, Widiento, BS and Breen, JE (2007). Experimental verification of strut-and-tie model design model. ACI Structural Journal 104(6):749–755.
Liang, QQ, Xie, YM and Steven, GP (2000). Topology optimization of strut-and-tie models in reinforced concrete structures using an evolutionary procedure. ACI Structural Journal 97(2):322–332.
Liang, QQ, Xie, YM and Steven, GP (2001). Generating optimal strut-and-tie models in prestressed concrete beams by performance-based optimization. ACI Structural Journal 98(2):226–232.
Lin, TY and Burns, NH (1981). Design of Prestressed Concrete Structures. 3rd edition, John Wiley & Sons, New York.
Loo, YC (1988). UNIDES-FP An Integrated Package for Design of Reinforced Concrete Fiat Plates on Personal Computer – User Manual. Wollongong Uniadvice Ltd, Wollongong.
Loo, YC (1989). FISBBOB2 A Finite Strip Program for Analysis of Plate and Box Girder Bridge on Personal Computer. Wollongong Uniadvice Ltd, Wollongong.
Loo, YC and Chiang, CL (1996). Punching shear strength analysis of post-tensioned flat plates with spandrel beams. The Structural Engineer 74(12):199–206.
Loo, YC and Falamaki, M (1992). Punching shear strength analysis of reinforced concrete flat plates with spandrel beams. ACI Structural Journal 89(4):375–383.
Loo, YC and Sutandi, TD (1986). Effective flange width formulas for T-beams. Concrete International 8(2):40–45.
Loo, YC and Wong, YW (1984). Deflection of reinforced box beams under repeated loadings. Journal of the American Concrete Institute 81(1):87–94.
Lopes, SM and do Carmo, RNF (2006). Deformable strut and tie model for the calculation of the plastic rotation capacity. Computers and Structures 84(31–32):2174–2183.
Lorell, W (1968). Advanced Reinforced Concrete Design – Lecture Notes. Unpublished notes presented at the Asian Institute of Technology, Bangkok and recorded by Loo YC during the lecture, 3 January 1968.
Magnel, G (1954). Prestressed Concrete. 3rd edition, McGraw-Hill, New York.
Mattock, AH (2012). Strut-and-tie models for dapped-end beams. Concrete International February:35–40.
Maxwell, BS and Breen, JE (2000). Experimental evaluation of strut-and-tie applied to deep beam with opening. ACI Structural Journal 97(1):142–148.
Murdock, LJ and Brook, KM (1982). Concrete Materials and Practice. 5th edition, Edward Arnold, London.
Nagarajan, P, Jayadeep, UB and Pillai, TMM (2009). Application of micro truss and strut and tie model for analysis and design of reinforced concrete structural elements. Songklanakarin Journal of Science and Technoogy 31(6):647–653.
Nagarajan, P and Pillai, TMM (2008). Development of strut and tie models for simply supported deep beams using topology optimization. Songklanakarin Journal of Science and Technology 30(5):641–647.
Nawy, EG (1984). Flexural cracking of pre- and post-tensioned flanged beams. In: Partial Prestressing, From Theory to Practice, vol II, Cohn MZ (ed.), Proceedings of the NATO Advanced Research Workshop, Paris, 18–22 June 1984, 137–156.
Nilson, AH, Darwin, D and Dolan, CW (2010). Design of Concrete Structures. 14th edition, McGraw-Hill, New York.
Park, JW and Kuchma, D (2007). Strut-and-tie model analysis for strength prediction of deep beams. ACI Structural Journal 104(6):657–666.
Park, R and Gamble, WL (1982). Reinforced Concrete Slabs. 2nd edition, John Wiley & Sons, New York.
Park, R and Paulay, T (1975). Reinforced Concrete Structures. John Wiley & Sons, New York.
Perera, R and Vique, J (2009). Strut-and-tie modelling of reinforced concrete beams using genetic algorithms optimisation. Construction and Building Materials 23(8):2914–2925.
Perera, R, Vique, J, Arteaga, A and Diego, AD (2009). Shear capacity of reinforced concrete members strengthened in shear with FRP by using strut-and-tie models and genetic algorithms. Composites Part B: Engineering 40:714–726.
Post-Tensioning Institute (2006). Post-Tensioning Manual. 6th edition, Post-Tensioning Institute, Phoenix.
Quintero-Febres, CG, Parra-Montesinos, G and Weight, JK (2006). Strength of struts in deep concrete members designed using strut-and-tie method. ACI Structural Journal 103 (4): 577–586.
Rangan, BV (1993). Discussion. Punching shear tests of half-scale reinforced concrete flat plate models with spandrel beams, by Falamaki M and Loo YC 89-S25. ACI Structural Journal 90(2):219.
Russo, G, Venir, R and Pauletta, M (2005). Shear strength model and design formula. ACI Structural Journal 102(3):429–437.
Ryan, WG and Samarin, A (1992) Australian Concrete Technology. Longman Cheshire, Melbourne.
Sahoo, DK, Singh, B and Bhargava, P (2009). Investigation of dispersion of compression in bottle-shaped struts. ACI Structural Journal 106(2):178–186.
Salzmann, A, Fragomeni, S and Loo, YC (2003). The damping analysis of experimental concrete beams under free-vibration. Advances in Structural Engineering 6(1):53–64.
Schlaich, J and Schafer, K (1991). Design and detailing of structural concrete using strut-and-tie models. The Structural Engineer 69(6):113–125.
Schlaich, J, Schafer, K and Jennewein, M (1987). Toward a Consistent Design of Structural Concrete. Special report to the Comite Euro-International du Beton, Lausanne.
Skibbe, E (2010). A Comparison of Design Using Strut-and-Tie Modeling and Deep Beam Method for Transfer Girders in Building Structures. MSc thesis, Kansas State University, Manhattan, Kansas.
Souza, R, Kuchma, D, Park, JW and Bittencourt, T (2009). Adaptable strut-and-tie model for design and verification of four-pile caps. ACI Structural Journal 106(2):142–150.
Strand7 Pty Ltd (2010). Using Strand7 – Introduction to the Strand7 Finite Element Analysis System. 3rd edition, online text. (viewed by authors April 2010).
Tang, CY and Tan, KH (2004). Interactive mechanical model for shear strength of deep beams. Journal of Structural Engineering 130(10):1634–1544.
Timoshenko, SP and Woinowsky-Kreiger, S (1959). Theory of Plate and Shells. 2nd edition, McGraw-Hill, New York.
Tjhin, TN and Kuchma, DA (2007). Integrated analysis and design tool for the strut-and-tie method. Engineering Structures 29(11):3042–3052.
To, NHT, Ingham, JM and Sritharan, S (2000). Cyclic strut-and-tie modeling of simple reinforced concrete structures. Proceedings of 12WCEE 1249:1–8.
Tuchscherer, RG, Birrcher, DB and Bayrak, O (2011). Strut-and-tie model design provisions. PCI Journal 56(1):155–170.
Wang, G-L and Meng, S-P (2008). Modified strut-and-tie model for prestressed concrete deep beams. Engineering Structures 30(12):3489–3496.
Warner, RF and Faulkes, KA (1988). Prestressed Concrete. 2nd edition, Longman Cheshire, Melbourne.
Warner, RF, Foster, SJ and Kilpatrick, AE (2006). Reinforced Concrete Basics – Analysis and Design of Reinforced Concrete Structures. Pearson Education Australia, Sydney.
Warner, RF, Rangan, BV and Hall, AS (1982). Reinforced Concrete. 2nd edition, Pitman Australia, Carlton.
Warner, RF, Rangan, BV, Hall, AS and Faulkes, KA (1998). Concrete Structures. Longman, South Melbourne.
Wight, JK and Parra-Montesinos, GJ (2003). Strut-and-tie model for deep beam design – A practical exercise using Appendix A of the 2002 ACI Building Code. Concrete International May: 63–70.
Wong, YW and Loo, YC (1985). Deflection analysis of reinforced and prestressed concrete beams under repeated loading. In: Proceedings of the Concrete 85 Conference, Brisbane, 23–25 October 1985, Institution of Engineers, Australia National Conference Publication no. 85/17, 138–142.
Yun, YM and Lee, WS (2005). Nonlinear strut-and-tie model analysis of pre-tensioned concrete deep beams. Journal of Advances in Structural Engineering 8(1):85–98.
Zhang, N and Tan, K-H (2007). Direct strut-and-tie model for single span and continuous deep beams. Engineering Structures 29:2987–3001.
