Drug-induced liver injury (DILI) is a common adverse drug reaction leading to the interruption of tuberculosis (TB) therapy. We aimed to identify whether the hepatitis B virus (HBV) infection would increase the risk of DILI during first-line TB treatment. A meta-analysis of cohort studies searched in PubMed, Web of Science and China National Knowledge Infrastructure was conducted. Effect sizes were reported as risk ratios (RRs) and 95% confidence intervals (CIs) and calculated by R software. Sixteen studies with 3960 TB patients were eligible for analysis. The risk of DILI appeared to be higher in TB patients co-infected with HBV (RR 2.66; 95% CI 2.13–3.32) than those without HBV infection. Moreover, patients with positive hepatitis B e antigen (HBeAg) were more likely to develop DILI (RR 3.42; 95% CI 1.95–5.98) compared to those with negative HBeAg (RR 2.30; 95% CI 1.66–3.18). Co-infection with HBV was not associated with a higher rate of anti-TB DILI in latent TB patients (RR 4.48; 95% CI 0.80–24.99). The effect of HBV infection on aggravating anti-TB DILI was independent of study participants, whether they were newly diagnosed with TB or not. Besides, TB and HBV co-infection patients had a longer duration of recovery from DILI compared to non-co-infected patients (SMD 2.26; 95% CI 1.87–2.66). To conclude, the results demonstrate that HBV infection would increase the risk of DILI during TB therapy, especially in patients with positive HBeAg, and close liver function monitoring is needed for TB and HBV co-infection patients.

Continuous hBN films have been grown by means of a radio-frequency-sputtering technology, and their material properties have been investigated. The prepared hBN films can achieve good smoothness in a large area. The surface morphologies and compositions of the hBN films on Si substrate and Al film have been characterized, indicating that there is no difference. The 101-phase peak of hBN film is the strongest, and the optical band gap of the fabricated film is 5.84 eV. An attempt on the fabrication of the hBN based resistive switching (RS) device has been made by using an Ag/hBN/Al structure, leading to the observation of a clear and stable RS behavior. The device exhibits a resistance window (high-resistivity state/low-resistivity state) of around 102, and the RS behaviors of hBN film prepared by sputtering were first observed. It has been found that the opening voltage for the device is changed when a different cycle voltage is applied because of the built-in electric field increasing with the increase of applied cycle voltage. The mechanism of the RS behavior has been analyzed, which lay a foundation for the application of hBN as RS material in resistive random access memory to improve the storage density.

Rare earth elements (REE) in marine minerals have been widely used as proxies for the redox status of depositional and/or diagenetic environments. Phosphate nodules, which are thought to grow within decimetres below the sediment–water interface and to be able to scavenge REE from the ambient pore water, are potential archives of subtle changes in REE compositions. Whether their REE signals represent specific redox conditions or they can be used to track the overlying water chemistry is worth exploring. Through in situ laser ablation – inductively coupled plasma – mass spectrometry (LA-ICP-MS), we investigate the REE compositions of a drill-core-preserved phosphate nodule from the lower Cambrian Niutitang Formation in the Daotuo area, northeastern Guizhou Province, South China. REE distributions of the nodule show concentric layers with systematic decreases in Ce anomalies (Ce/Ce*) from the core to the rim. The lowest Ce/Ce* appears in the outer rim where REE concentrations are relatively high. These results are interpreted to reflect REE exchange with pore water at a very early stage or bathymetric variation during apatite precipitation. The origin of the shale-normalized middle REE (MREE) enrichment in our sample is less constrained. Possible driving factors include preferential MREE substitution for Ca in the apatite lattice, degradation of organic matter and deposition beneath a ferruginous zone. Although speculative, the last possibility is consistent with the chemically stratified model for early Cambrian oceans, in which dynamic fluctuations of the chemocline provided an ideal depositional context for phosphogenesis.

Six acidic dykes were discovered surrounding the Laiziling pluton, Xianghualing area, in the western Cathaysia Block, South China. A number of captured zircons are found in two of these acidic dykes. By detailed U–Pb dating, Lu–Hf isotopes and trace-element analysis, we find that these zircons have ages clustered at c. 2.5 Ga. Two acidic dyke samples yielded upper intersection point 206U/238Pb ages of 2505 ± 42 Ma and 2533 ± 22 Ma, and weighted mean 207Pb/206Pb ages of 2500 ± 30 Ma and 2535 ± 16 Ma. The majority of these zircons have high (Sm/La)N, Th/U and low Ce/Ce* ratios, indicating a magmatic origin, but some grains were altered by later hydrothermal fluid. Additionally, the magmatic zircons have high Y, U, heavy rare earth element, Nb and Ta contents, indicating that their host rocks were mainly mafic rocks or trondhjemite–tonalite–granodiorite rock series. Equally, their moderate Y, Yb, Th, Gd and Er contents also indicate that a mafic source formed in a continental volcanic-arc environment. These zircons have positive ϵHf(t) values (2.5–6.9) close to zircons from the depleted mantle, with TDM (2565–2741 Ma) and TDM2 (2608–2864 Ma) ages close to their formation ages, indicating that these zircons originated directly from depleted mantle magma, or juvenile crust derived from the depleted mantle in a very short period. We therefore infer that the Cathaysia Block experienced a crustal growth event at c. 2.5 Ga.

The coronavirus disease 2019 (COVID-19) outbreak caused by the severe acute respiratory syndrome coronavirus 2 (SARS-Cov-2 virus) has been sustained in China since December 2019, and has become a pandemic. The mental health of frontline medical staff is a concern. In this study, we aimed to identify the factors influencing medical worker anxiety in China during the COVID-19 outbreak. We conducted a cross-sectional study to estimate the prevalence of anxiety among medical staff in China from 10 February 2020 to 20 February 2020 using the Zung Self-rating Anxiety Scale (SAS) to assess anxiety, with the criteria of normal (⩽49), mild (50–59), moderate (60–70) and severe anxiety (⩾70). We used multivariable linear regression to determine the factors (e.g. having direct contact when treating infected patients, being a medical staff worker from Hubei province, being a suspect case) for anxiety. We also used adjusted models to confirm independent factors for anxiety after adjusting for gender, age, education and marital status. Of 512 medical staff in China, 164 (32.03%) had had direct contact treating infected patients. The prevalence of anxiety was 12.5%, with 53 workers suffering from mild (10.35%), seven workers suffering from moderate (1.36%) and four workers suffering from severe anxiety (0.78%). After adjusting for sociodemographic characteristics (gender, age, education and marital status), medical staff who had had direct contact treating infected patients experienced higher anxiety scores than those who had not had direct contact (β value = 2.33, confidence interval (CI) 0.65–4.00; P = 0.0068). A similar trend was observed in medical staff from Hubei province, compared with those from other parts of China (β value = 3.67, CI 1.44–5.89; P = 0.0013). The most important variable was suspect cases with high anxiety scores, compared to non-suspect cases (β value = 4.44, CI 1.55–7.33; P = 0.0028). In this survey of hospital medical workers during the COVID-19 outbreak in China, we found that study participants experienced anxiety symptoms, especially those who had direct clinical contact with infected patients; as did those in the worst affected areas, including Hubei province; and those who were suspect cases. Governments and healthcare authorities should proactively implement appropriate psychological intervention programmes, to prevent, alleviate or treat increased anxiety.

Information about seed dormancy cycling and germination in relation to temperature and moisture conditions in the natural environment is important for the conservation and restoration of rare species, including Begonia guishanensis and Paraisometrum mileense, two sympatric perennial limestone (karst) species. Dry afterripening (DAR) and wet and dry (WD) cycles at 15/5 and 25/15°C as well as moist chilling (MC) at 15/5°C were used to mimic the natural environment at different times of the year. A field experiment was conducted to monitor seasonal changes in germination responses of the seeds. About 40–65% of B. guishanensis and 5% of P. mileense seeds were dormant at maturity. DAR at 25/15 and 15/5°C as well as MC and WD cycles at 15/5°C alleviated dormancy for B. guishanensis but not P. mileense, and WD cycles at 25/15°C induced a deeper conditional dormancy for both species. Seeds of B. guishanensis exhibited dormancy cycling in the field, with increased dormancy under natural WD cycles at relatively high temperatures during the transition from the dry to the wet season in April to May and decreased dormancy during the wet season from June to October. KNO3 mitigated the dormancy-inducing effect of both artificial and natural WD cycles at relatively high temperatures for B. guishanensis. The field experiment indicated that seeds of B. guishanensis may be able to form a persistent soil seed bank, while almost all seeds of P. mileense germinate at the beginning of the wet season in the field.

The study of the petrogenesis of some magmatic rocks with special geochemical attributes provides effective information for us to explore the deep geodynamic background of their formation. A series of granitic porphyry dykes have been found in the mélange zone of the Asa region in southern Tibet, whose genesis may be closely related to the evolution of the Meso-Tethyan Ocean. Regional geodynamic evolution is investigated by whole-rock geochemical analysis, zircon U–Pb dating and Lu–Hf isotopic analysis of two porphyritic granites. The Asa porphyritic granites have high SiO2 (74.29–78.65 wt %) and alkalis (Na2O + K2O = 6.51–9.35 wt %) contents, and low Al2O3 (11.60–14.51 wt %), CaO (0.04–0.19 wt MgO (0.01–0.10 wt %) contents. They are enriched in Zr, Nb, Ce, Y and Hf and depleted in Ti, Ba, Sr and P, consistent with A-type granites. The samples are relatively rich in LREEs, with LREE/HREE ratios of 1.73–3.04. They display negative Eu anomalies (Eu/Eu* = 0.24–0.28) and obvious Ce anomalies in some samples. Zircon U–Pb analyses show that the porphyritic granites formed in late Early Cretaceous time, 107.4 to 105.5 Ma. Zircon εHf(t) values are in the range of 6.9 to 12.0. These data indicate that the porphyritic granites were sourced from interaction between mantle-derived and juvenile lower crust-derived melts, with the addition of oceanic sediment-derived melts. This occurred when the subducting Bangong–Nujiang oceanic crust split to create a slab window. Rising asthenosphere triggered re-melting of lower crust basalts, resulting in the formation of the late Early Cretaceous A-type granites around Asa.

The aim of this study was to investigate the in vivo degradation mechanism and the mechanical properties of poly(lactide-co-glycolide)/beta-tricalcium phosphate (PLGA/β-TCP) composite anchors. Anchors composed of PLGA and β-TCP were implanted in the dorsal subcutaneous tissue of beagle dogs for 6, 12, 16, and 26 weeks. The degradation of the materials was evaluated by measuring the changes in thermal behavior, crystallinity, and mechanical properties. Scanning electron microscope (SEM) was used to observe the surface and longitudinal section of the material. The evaluation of mechanical strength retention and degradation properties suggest that the addition of β-TCP particles efficiently enhances their mechanical properties and thermal characteristics and delays their degradation rate. By analyzing the results of SEM, X-ray diffraction, and differential scanning calorimetry, we can infer that after 12 weeks, the connection between β-TCP and PLGA becomes less compact, which accelerates the decline of mechanical strength.

We examined the in vitro developmental competence of parthenogenetic activation (PA) oocytes activated by an electric pulse (EP) and treated with various concentrations of AZD5438 for 4 h. Treatment with 10 µM AZD5438 for 4 h significantly improved the blastocyst formation rate of PA oocytes in comparison with 0, 20, or 50 µM AZD5438 treatment (46.4% vs. 34.5%, 32.3%, and 24.0%, respectively; P < 0.05). The blastocyst formation rate was higher in the group treated with AZD5438 for 4 h than in the groups treated with AZD5438 for 2 or 6 h (42.8% vs. 38.6% and 37.2%, respectively; P > 0.05). Furthermore, 66.67% of blastocysts derived from these AZD5438-treated PA oocytes had a diploid karyotype. The blastocyst formation rate of PA and somatic cell nuclear transfer (SCNT) embryos was similar between oocytes activated by an EP and treated with 2 mM 6-dimethylaminopurine for 4 h and those activated by an EP and treated with 10 µM AZD5438 for 4 h (11.11% vs. 13.40%, P > 0.05). In addition, the level of maturation-promoting factor (MPF) was significantly decreased in oocytes activated by an EP and treated with 10 µM AZD5438 for 4 h. Finally, the mRNA expression levels of apoptosis-related genes (Bax and Bcl-2) and pluripotency-related genes (Oct4, Nanog, and Sox2) were checked by RT-PCR; however, there were no differences between the AZD5438-treated and non-treated control groups. Our results demonstrate that porcine oocyte activation via an EP in combination with AZD5438 treatment can lead to a high blastocyst formation rate in PA and SCNT experiments.

For the prevention and control of newly emergent or sudden infectious diseases, we built an on-site, modularized prevention and control system and tested the equipment by using the clustering analysis method. On the basis of this system, we propose a modular equipment allocation method and 4 applications of this method for different types of infectious disease prevention and control. This will help to improve the efficiency and productivity of anti-epidemic emergency forces and will provide strong technical support for implementing more universal and serialized equipment in China. (Disaster Med Public Health Preparedness. 2017;11:375–382)

In this paper, the recent studies of laboratory astrophysics with strong magnetic fields in China have been reviewed. On the Shenguang-II laser facility of the National Laboratory on High-Power Lasers and Physics, a laser-driven strong magnetic field up to 200 T has been achieved. The experiment was performed to model the interaction of solar wind with dayside magnetosphere. Also the low beta plasma magnetic reconnection (MR) has been studied. Theoretically, the model has been developed to deal with the atomic structures and processes in strong magnetic field. Also the study of shock wave generation in the magnetized counter-streaming plasmas is introduced.

Schistosoma japonicum, a human blood fluke, causes a parasitic disease affecting millions of people in Asia. Thioredoxin–glutathione system of S. japonicum plays a critical role in maintaining the redox balance in parasite, which is a potential target for development of novel antischistosomal agents. Here we cloned the gene of S. japonicum thioredoxin (SjTrx), expressed and purified the recombinant SjTrx in Escherichia coli. Functional assay shows that SjTrx catalyses the dithiothreitol (DTT) reduction of insulin disulphide bonds. The coupling assay of SjTrx with its endogenous reductase, thioredoxin glutathione reductase from S. japonicum (SjTGR), supports its biological function to maintain the redox homeostasis in the cell. Furthermore, the crystal structure of SjTrx in the oxidized state was determined at 2·0 Å resolution, revealing a typical architecture of thioredoxin fold. The structural information of SjTrx provides us important clues for understanding the maintenance function of redox homeostasis in S. japonicum and pathogenesis of this chronic disease.

Calcium hydroxide (Ca(OH)2) is one of the most interesting materials used to consolidate stone sculptures, monuments, mortars or wall paintings. In this study, we reported on the synthesis and characterization of surface modified Ca(OH)2 nanoparticles as a dispersion with enhanced kinetic stability and the applications for the conservation of sandstone monuments. Uniform hexagonal Ca(OH)2 nanoparticles (∼35nm) were obtained by mixing NaOH and NaCl aqueous solutions at 100∼175oC using homogeneous-phase reactions. It was further demonstrated that 3-(Methacryloyloxypropane oxygen) trimethoxysilane surfactant agent can significantly reduce agglomeration and simultaneously improve specific surface area of as-synthesized Ca(OH)2 nanoparticles. Brunauer-Emmett-Teller (BET) measurement showed that specific surface area of modified Ca(OH)2 nanoparticles reaches up to ∼48.78m2/g, about 2.5 and 3.4 times higher than that of unmodified and commercial ones, respectively. The kinetic stability of Ca(OH)2 despersion can be further enhanced and its viscosity can be decreased by optimizing the ratio of ethanol and n-propanol. Especially, a technique, which combined the Ferroni-Dini method and dispersion of Ca(OH)2 nanoparticles with enhanced kinetic stability, was proposed to effectively desalinate and consolidate the decayed stone, as evidenced by significant decreases of the porosity and concentration of detrimental Cl- and SO4 2- ions in the severely decayed sandstone samples from the Yungang grottoes.