A new ternary intermetallic compound Al3GaCu9 was synthesized experimentally. A high-quality powder diffraction pattern of the compound was collected by an X-ray diffractometer, and its crystal structure was determined using the Rietveld refinement method. Results show that the compound has a cubic cell with the Al4Cu9 structure type (space group $P\bar{4}3m$ and Pearson symbol cP52). The lattice parameter a = 8.7132(3) Å, unit-cell volume V = 661.52 Å3, calculated density Dcalc = 7.26 g/cm3, and Z = 4. The residual factors converge to Rp = 2.96%, Rwp = 4.06%, and Rexp = 2.57%. The experimentally obtained reference intensity ratio value is 7.04.

Objectives: The increase in carbapenemase-producing organism (CPO) transmission among hospitalized patients is a growing concern. Studies investigating the transmission of CPO to epidemiologically linked contacts are scarce. We conducted an interim subgroup analysis of the ongoing multicenter household transmission of CPO in Singapore (CaPES-C) study to identify the acquisition rate of CPO among epidemiologically linked contacts of hospitalized CPO patients. Methods: This multicenter prospective cohort study was conducted between January and December 2021. We recruited CPO-positive patients and their epidemiologically linked contacts. Stool samples were collected from the patients at baseline, day 3, day 7, and at weeks 2, 3, 4, 5, 6, 12, 24, 36, and 48. Additionally, a sample was collected at the time of discharge from the hospital. Xpert Carba-R test was used to detect CPO genotypes in the stool samples. In this interim analysis, we calculated the acquisition rate of CPO among the epidemiologically linked hospital contacts of CPO positive patients using Stata version 15 software. Results: We recruited 22 (56.4%) CPO-positive index patients [blaNDM, n = 7 (31.8%); blaIMP, n = 3 (13.6%); blaOXA-48, n = 10 (45.5%), others, n = 2 (9.1%)] and 14 (35.9%) epidemiologically linked hospital contacts. The median age of CPO-positive patients was 72.5 years (IQR, 62–82) and 15 (68.2%) were female. The median age for the epidemiologically linked contacts was 82.5 years (IQR, 70–85) and 4 (28.6%) were female. After 1,082 patient days, 2 (14.3%) epidemiologically linked contacts tested positive for CPO giving an acquisition rate of 1.85 per 1,000 patient days (95% CI, 0.46 – 7.39). One of these participants acquired a concordant genotype (blaOXA-48) at day 7 and the other acquired a discordant genotype (CPO positive index, blaIMP; epidemiologically linked contact, blaNDM) at week 12 of follow-up. Conclusions: This small interim analysis revealed a high conversion rate among epidemiologically linked hospital contacts. A larger study is needed to understand the influence of genotypes, hospital environment, and human behavior on the transmission of CPO in hospitals.

Soft robots combine the load-bearing capability of rigid material with the resilience, shape-shifting capabilities of soft materials. This paper presents a novel soft actuator with stiffness variation using particulate jamming technology. We design a hybrid composite structure consisting of driving layer and jamming layer. The driving layer with the arc air chamber aim to achieve large bending deformation. A membrane containing particles is integrated with driving layer to module its stiffness. The influence factors of stiffness variation were analyzed from energy of point of view. The dependence of granular attributes on the stiffness of the actuator was studied. Furthermore, we illustrated influence of stiffness changes on the kinematic and dynamic performance of the soft actuator. The experimental results showed these performance indexes are twofold. On the one hand, the structural parameters have significant effect on the bending angle, but on the other hand they have little effect on the end force. We found that flow resistance inside air chamber results in bending morphology variation. The dynamic response subjected to a square-wave air pressure was analyzed to exhibit the actuator’s transient and steady vibration behavior. The actuator with greater stiffness has faster responsiveness, but smaller range of motion. These conclusions are helpful to adjust the stiffness behavior and to improve motion performance.

Background Mild Cognitive Impairment is an at-risk stage for dementia and early detection has been increasingly recommended to facilitate beneficial interventions and forward planning. Changes in cognition and function can be insidious. In ageing populations, relying on relatives to detect changes is not sustainable. Moreover, resource scarcity necessitates that we innovate to find less manpower dependent methods for early detection and assessment.

Objectives In two separate feasibility studies, we set out to evaluate if sensors could be utilized to (1) detect changes in behaviour patterns in homes of community dwelling elderly* & (2) evaluate instrumental activities of daily living (iADLs) in a smart home lab setting.

Method In the first study, 59 community-dwelling seniors (aged >65 years) were observed over the course of 2 months through the use of motion sensors, smart plugs, bed sensors and activity bands. Behaviour metrics such as forgetfulness, outings and sleep were tracked. In the second study, a smart lab was equipped with similar sensors and 35 seniors were tasked to complete two iADLs (using the telephone and counting money) while being evaluated by the sensor system.

Results In both studies, we found that it was feasible and seniors found the sensors to be acceptable. Over 80% of seniors had positive feedback for the in-home system and over 95% of seniors had found the lab-based evaluation of iADLs to be acceptable.

Conclusion Sensor technology and smart homes are feasible to utilize for assessment and monitoring of cognition and function. Knowing that seniors find it acceptable is a crucial initial step. Much more needs to be done to refine the systems and the clinical information it yields.

A dual-arm space robot has large potentials in on-orbit servicing. However, there exist multiple dynamic coupling effects between the two arms, each arm, and the base, bringing great challenges to the trajectory planning and dynamic control of the dual-arm space robotic system. In this paper, we propose a dynamic coupling modeling and analysis method for a dual-arm space robot. Firstly, according to the conservation principle of the linear and angular momentum, the dynamic coupling between the base and each manipulator is deduced. The dynamic coupling factor is then defined to evaluate the dynamic coupling degree. Secondly, the dynamic coupling equations between the two arms, each arm, and the base are deduced, respectively. The dynamic coupling factor is suitable not only for single-arm space robots but also for multi-arm space robot systems. Finally, the multiple coupling effects of the dual-arm space robotic system are analyzed in detail through typical cases. Simulation results verified the proposed method.

Research suggests that cause lawyers are a diverse group. Death penalty lawyers with attachment to political institutions and a strong commitment to procedurals tend to have a unique path to professional identification, participation in the legal process and acquiring the ability to affect case outcomes. Borrowing from Hilbink's typologies and Liu and Halliday's analytical framework, this study examines in detail the practices of proceduralist and progressive elite lawyers. It uses a high-profile capital case, the Nian Bin case, as a case study to analyse the motivation and strategies of the lead defence lawyer in the context of progressive proceduralist cause lawyers. Relevant theoretical and policy implications as well as suggestions for future studies are discussed.

Due to a large number of redundant degrees of freedom (DOFs), the hyper-redundant manipulator shows outstanding dexterity and adaptability in avoiding the obstacles in confined space. In this paper, a hybrid obstacle-avoidance method of spatial hyper-redundant manipulators is proposed, with both efficiency and accuracy considered. The space around an obstacle is classified into safe, warning, and dangerous zones. A two-level protection strategy is then addressed to handle the obstacle-avoidance problem from qualitative (i.e., pseudo-distance based on super-quadric function) and quantitative (i.e., Euclidean distance based on practical geometry function) perspectives, respectively. The only condition for switching between the two-level protections is the value of pseudo-distance. Then, a modified modal method, which is a trajectory planning method, is presented to plan the collision-free trajectory of the manipulator by maximizing the minimum pseudo-distance or Euclidean distance in different zones. Some parameters, including the arm-angle parameters and the equivalent link length parameters, are defined to represent the manipulator configuration. They are adjusted to avoid the obstacle, singularity, and joint limit. The simulations of 12-DOF manipulator and an experiment of 18-DOF manipulator verify the proposed methods.

The hyper-redundant manipulators are suitable for working in the constrained on-orbit servicing environment due to the extreme flexibility. However, its modelling and control are very challenging due to the characteristics of non-linearity and strong coupling. In this paper, considering the multi-level mapping among the motors, cables, joints, and end-effector, a proportional derivative (PD) with dynamic feedforward compensation control system is designed. The corresponding control system is divided into five parts: controller, planner, actuator, manipulator, and sensor. The actual control torque consisting of the desired feedforward torque and the feedback torque is generated by the controller. In order to improve the tracking accuracy and maintain rapid response, the torque, which is calculated by the dynamics model of the traditional joint-driven manipulator, is regarded as the desired feedforward torque. The parameters of interest are the angle and velocity of the universal joint and motors. The planner plans and converts the desired parameters of the universal joint to corresponding motors. Combining with the feedback angles and velocities signals of the corresponding motors, the feedback torque can be calculated by the PD control module. Finally, typical cases of six universal joints (12DOFs) manipulators are simulated and experimented. The results demonstrate that the method is very efficient for controlling spatial cable-driven hyper-redundant manipulators.

A coaxial-output rolled strip pulse-forming line (RSPFL) with a dry structure is researched for the purpose of miniaturization and all-solid state of pulse-forming lines (PFL). The coaxial-output RSPFL consists of a coaxial-output electrode (COE) and a rolled strip line (RSL). The COE is characterized by quasi-coaxial structure, making the output pulse propagate along the axial direction with a small output inductance. The RSL is rolled on the COE, whose transmission characteristics are analyzed theoretically. It shows that the RSL can be regarded as a planar strip line when the rolling radius of the strip line is larger than 60 times of the thickness of the insulation dielectric layer of RSL. CST modeling was carried out to simulate the discharging characteristic of the coaxial-output RSPFL. It shows that the coaxial-output RSPFL can deliver a discharging pulse with a rise time <6 ns when the impedance of the RSL matches that of the COE, which confirms the theoretical analysis. A prototype of the coaxial-output RSPFL was developed. A 49-kV discharging pulse on a matched load was achieved when it was charged to 100 kV. The discharging waveform has a pulse width of 32 ns, with a rise time of 6 ns, which is consistent with the simulation waveform. An energy-storage density of 1.9 J/L was realized in the coaxial-output RSPFL. By the method of multi-stage connection in series, a much higher output voltage is convenient to be obtained.

In this work, the reduction mechanism of potassium chromate (K2CrO4) was investigated via in situ high-temperature X-ray diffraction coupled with Fourier transform infrared spectroscopy. During the hydrogen reduction of K2CrO4, the formation of K3CrO4, KCrO2, and KxCrO2 were detected for the first time. The study discovered that K2CrO4 was firstly reduced to K3CrO4 and an amorphous Cr(III) intermediate product at low temperature (400–500 °C). Moreover, the K3CrO4 was the only crystalline material at this stage. As the temperature increased, a stabilized amorphous CrOOH was formed. At a high temperature (550–700 °C), KCrO2 was generated. Interestingly, a portion of KCrO2 was spontaneously decomposed during the hydrogen reduction, accompanying by the formation of K0.7CrO2. Finally, the results clearly illustrated the reduction mechanism of K2CrO4: K2CrO4 → K3CrO4 → amorphous intermediate → KCrO2.

The Lorentz factor (Γ) is an important parameter related to the relativistic jet physics. We study the evolution patterns of Γ within gamma-ray burst (GRB) and active galactic nuclear jets for individual GRB 090168, GRB 140508A, and 3C 454.3. By estimating the Γ values for well-separated pulses in GRBs 090618 and 140508A with an empirical relation derived from typical GRBs, we find that the Γ evolution pattern in the two GRBs are different. The increasing-to-coasting evolution pattern of Γ in GRB 090618 likely indicates that the GRB fireball is still being accelerated in the prompt phase. The clear decrease evolution pattern of Γ in GRB 140508A suggests the deceleration of the fireball components. By deriving the Γ value through fitting their spectral energy distribution in different flares of 3C 454.3, a pattern of Γ-tracking-γ-ray flux is clearly found, likely indicating that the observed gamma-ray flares are being due to the Doppler boosting effect to the jet emission.

Intra-uterine growth restriction (IUGR) impairs postnatal growth and skeletal muscle development in neonatal infants. This study evaluated whether dietary β-hydroxy-β-methylbutyrate Ca (HMB-Ca) supplementation during the early postnatal period could improve muscle growth in IUGR neonates using piglets as a model. A total of twelve pairs of IUGR and normal-birth-weight (NBW) male piglets with average initial weights (1·85 (sem 0·36) and 2·51 (sem 0·39) kg, respectively) were randomly allotted to groups that received milk-based diets (CON) or milk-based diets supplemented with 800 mg/kg HMB-Ca (HMB) during days 7–28 after birth. Blood and longissimus dorsi (LD) samples were collected and analysed for plasma amino acid content, fibre morphology and the expression of genes related to muscle development. The results indicate that, regardless of diet, IUGR piglets had a significantly decreased average daily weight gain (ADG) compared with that of NBW piglets (P<0·05). However, IUGR piglets fed HMB-Ca had a net weight and ADG similar to that of NBW piglets fed the CON diet. Irrespective of body weight (BW), HMB-Ca supplementation markedly increased the type II fibre cross-sectional area and the mRNA expression of mammalian target of rapamycin (mTOR), insulin-like growth factor-1 and myosin heavy-chain isoform IIb in the LD of piglets (P<0·05). Moreover, there was a significant interaction between the effects of BW and HMB on mTOR expression in the LD (P<0·05). In conclusion, HMB-Ca supplementation during the early postnatal period could improve skeletal muscle growth and maturity by accelerating fast-twitch glycolytic fibre development in piglets.

To evaluate the effects of defoliation on green forage performance and grain yield (GY) variation in barley, five barley genotypes were imposed on three levels of defoliation treatments over two consecutive growing seasons in this study. The results indicated that green forage yields were significantly improved by repeated defoliation. The traits of green forage quality, including the ratio of dry weight to fresh weight, crude ash and calcium content were improved, while crude protein and crude fat were reduced, and crude fiber and phosphorus contents appeared not to be influenced by repeated defoliation. Plant height (PH), GY and other yield components, grain number per spike and thousand kernel weight, were significantly reduced by defoliation over the two growing seasons, while internode length below spike was less affected. Reduction in spike length and the number of spikes per plant were identified in only one year. Correlation analysis revealed that only PH exhibited a positive correlation with GY. Effects of genotype, interaction between genotype and defoliation, and environments on changes of forage yield and quality and GY were also discussed. Our current work provides a feasible approach to select elite barley cultivars with optimal defoliation treatments for both forage and grain uses in barley breeding programme.

The X-ray light curve of Sw~J1644+57 indicates this event would be due to a tidal disruption. The lightcurve shows large amplitude fluctuation. As proposed by Lyubarskii (1997), the aperiodic variability observed in the Galactic X-ray binaries and active galactic nuclei is likely from the fluctuation of the viscous parameter in their disks. We explain the significant fluctuation of the late X-ray lightcurve (t>106 seconds) of Sw J1644+57 with this model. We assume the stochastic variations in the viscous parameter featuring as α(R,t) = α0 [1+β(R,t)], where the time-scale for varying β(R,t) is set as ten times of the dynamic time-scale for disk at the radius R (Janiuk & Misra 2012). Based on the simulation results of Lodato et al. (2009), we describe the fallback behavior of the tidal disruption as Ṁfb ∝ {[(t - tb)/tfb]κ n + [(t - tb)/tfb]5n/3}−1/n for t > tb and Ṁfb=0 for other situations, where κ=10.0, n=0.5, tfb=103τ, and tb=102τ in which τ=2π(Rf3/GMBH)1/2 and Rf=5rg is the pericentre distance. Figure 1 compare the power-density spectra (PDS) derived from the observed and our simulated lightcurves. It is found the our simulations are well consistent with the observations.

Due to the special working environment of teleoperation, there are usually uncertainties existing in the dynamics of teleoperating robots. In this paper, an adaptive bilateral control scheme is proposed for the nonlinear teleoperation with parameterized dynamic uncertainties and time delays. Compared to the existing time-delay adaptive bilateral controllers, the proposed scheme has the advantage of faster and more accurate parameter adaptation. In this way, the transient performance of teleoperators can be improved without increasing the control gains, which is helpful for stability of teleoperation. The adaptive bilateral controller is designed to be applicable both in free motion and in constrained motion. The synchronization errors in the unconstrained subspace are asymptotically convergent under time delays. In the constrained subspace, the contact force remains bounded with the proposed controller. The stability of teleoperation is proved using Lyapunov methods and the passivity theory. Simulation results demonstrate the effectiveness of the proposed method.