Rice is one of the staple food crops of India, and Karnataka is one of the major rice-producing states. The primary method of rice establishment in Karnataka is transplanting, but farmers are opting to shift to direct-seeding of rice. Weed management is critical for realizing optimal yield of direct-seeded rice (DSR). The objective of this review was to synthesize the published literature on weeds and weed management in rice in Karnataka, identify improved weed-management technologies for delivery to farmers, and suggest research needs. Some 98 weed species are reported to be associated with rice in Karnataka. Weed control to date in Karnataka has mostly been based on herbicides. Hand-weeding was found to be effective in all methods of rice establishment. However, it is time-consuming, tedious, and costly because labor is becoming scarce and unavailable, and labor wages are higher. Several PRE and POST herbicides that were effective in other Asian countries were also found to be effective in managing weeds in rice established by different methods in Karnataka. Bensulfuron plus pretilachlor and pyrazosulfuron in aerobic rice and pendimethalin, thiobencarb, bispyribac-sodium, cyhalofop, fenoxaprop plus chlorimuron plus metsulfuron, and fenoxaprop plus ethoxysulfuron in dry-DSR were found effective in managing weeds. In wet-DSR, butachlor plus safener and pretilachlor plus safener were effective. Thiobencarb, pendimethalin, pretilachlor, azimsulfuron plus metsulfuron, bispyribac-sodium, butachlor, cinosulfuron, oxadiazon, and quinclorac were found promising for weed management in transplanted rice. Integration of herbicides with hand-weeding or intercultivation was found to be effective in rice established by different methods. Options that were found economical in managing weeds varied across the different rice-establishment methods. The need for developing location-specific, sustainable, integrated weed management and extension of available technologies for the farming community in Karnataka is emphasized.

The development and spread of glyphosate-resistant (GR) horseweed has increased the use of dicamba as an alternative herbicide treatment. Research evaluated suspected glyphosate-resistant horseweed populations from DeKalb (GR-1) and Cherokee (GR-2) counties, Alabama, for response to glyphosate, dicamba, and glyphosate + dicamba. Populations used for resistance determination were tested at rosette and bolt growth stages. Glyphosate resistance evaluation treatments ranged from 0 to 36.0 kg ae ha−1. Data confirmed that GR-1 and GR-2 horseweed populations were 3.0 to 38 times more resistant to glyphosate than the susceptible population, according to population, data type, and growth stage at treatment. GR-1 and GR-2 populations were further evaluated for response to dicamba. Dicamba was applied at 0 to 1.12 kg ai ha−1, both with and without the addition of glyphosate at 1.12 kg ae ha−1. All populations had similar tolerance to dicamba, with the exception of GR-2 treated at the rosette growth stage, which had ~2-fold greater tolerance. When glyphosate was tank-mixed with dicamba, the response of GR populations was similar to that of dicamba alone. Therefore, any potential resistance-management benefit of tank-mixing dicamba with glyphosate may be negated when one is attempting to control GR horseweed. Conversely, adding glyphosate to dicamba drastically enhanced control of the susceptible population at both growth stages.

Field experiments were conducted in 2012 and 2013 to determine the effects of row spacing, seeding rate, and herbicide programs on multiple-resistant waterhemp control and yield in glufosinate-resistant soybean. The two herbicide programs evaluated were: (1) a PRE application of fomesafen plus S-metolachlor followed by early POST application of glufosinate plus acetochlor, referred to as the PRE followed by (fb) POST with residual (w/RES) herbicide program; and (2) an early POST followed by a late POST application of glufosinate, referred to as the two-pass POST herbicide program. Results indicate that the PRE fb POST w/RES program provides greater control of resistant waterhemp compared to the two-pass POST herbicide program. In 2012, the PRE fb POST w/RES program resulted in a 99% waterhemp density reduction and 156 kg ha−1 increase in yield compared to the 72% density reduction by the two-pass POST program. In 2013, the two-pass POST program was equally as effective on density reduction and yield as the PRE fb POST w/RES program. Waterhemp control and density reduction was always greatest with 19- and 38- compared to 76-cm rows. In 2012, the PRE fb POST w/RES program provided at least 95% control and greater than 98% density reduction across all row spacings, whereas the two-pass POST program provided 95%, 95%, and 85% control and 87%, 80%, and 50% density reduction in 19-, 38-, and 76-cm rows, respectively. Soybean seeding rate did not affect waterhemp control or density in either year. In both years, 165,000 seeds ha−1 yielded lower than the three higher seeding rates. Overall, results from these experiments indicates that the use of a PRE fb POST w/RES program, narrow-row spacing, and seeding rates of 240,000 to 315,000 seeds ha−1 or greater provides the greatest waterhemp control, density reduction, and soybean yield when multiple resistant waterhemp is present.

Use of organic mulch is one of the most common methods of weed control in landscape planting beds and provides other benefits, including improved soil characteristics, increased growth of ornamental plants, and enhanced property aesthetics. In the landscape maintenance industry, it is common to apply mulch and herbicides concurrently to landscape beds to provide long-term, broad-spectrum weed control. It is known that herbicides behave differently when applied to different soil types and organic materials; however, research is lacking concerning which herbicides are most effective with different mulch materials in the landscape. Determining the most effective herbicide–mulch combinations could potentially improve weed control, reduce labor costs from hand weeding, and mitigate negative environmental impacts resulting from off-site herbicide movement. The objective of this paper is to review the research that has been conducted pertaining to various mulch–herbicide combinations in the landscape and in other areas of agricultural production while also identifying key knowledge gaps that should be addressed in future research. Review of the literature suggests satisfactory weed control can be achieved with high mulch depths (≥ 7 cm) regardless of herbicide use, and herbicide–mulch interactions become more pronounced as mulch depth decreases. Additionally, future research is needed to determine which herbicides are best suited for different mulch types to improve weed control and potentially reduce environmental impacts, including herbicide leaching and runoff into urban and suburban waterbodies.

Cotton genetically engineered to be resistant to topical applications of 2,4-D could provide growers with an additional tool for managing difficult-to-control broadleaf species. However, the successful adoption of this technology will be dependent on the ability of growers to manage off-target herbicide movement. Field experiments were conducted in Moultrie, GA, to evaluate cotton injury resulting from the volatilization of 2,4-D when formulated as an ester, an amine, or a choline salt. Each formulation of 2,4-D (2.24 kg ha−1) was applied in mixture with glyphosate (2.24 kg ha−1) directly to the soil surface (10 to 20% crop residue) in individual square blocks (750 m2). Following herbicide applications, replicate sets of four potted cotton plants (five- to seven-leaf stage) were placed at distances ranging from 1.5 to 48 m from the edge of each treatment. Plants were allowed to remain in-field for up to 48 h before being removed. Cotton exposed to 2,4-D ester for 48 h exhibited maximum injury ratings of 63, 57, 48, 29, 13, and 2% at distances of 1.5, 3, 6, 12, 24, and 48 m, respectively. Less than 5% injury was noted for the amine and choline formulations at any distance. Plant height was also affected by formulation and distance; plants that were located closest to the ester-treated block were smaller than their more distantly-positioned counterparts. Exposure to the amine and choline formulations did not affect plant heights. Additionally, two plastic tunnels were placed inside of each treated block to concentrate volatiles and maximize the potential for crop injury. Injury ratings of 76, 13, and 5% were noted for cotton exposed to the ester, amine, and choline formulations, respectively when under tunnels for 48 h. Results indicate that the choline formulation of 2,4-D was less volatile and injurious to cotton than the ester under the field conditions in this study.

In recent years injury has been reported in numerous Tennessee corn fields treated with an organophosphate (OP) insecticide and either a mesotrione- or tembotrione-based herbicide premix. Research was conducted with the objective to determine if corn treated with an in-furrow application of chlorpyrifos or a foliar application of chlorpyrifos or bifenthrin, or a combination of in-furrow and foliar treatment, would be more predisposed to injury when either a premix of S-metolachlor, mesotrione, and glyphosate (meso premix) or a premix of tembotrione plus thiencarbazone (tembo premix) was applied. The main effects of insecticide or herbicide, the two-way interaction of insecticide by herbicide, and the three-way interaction of herbicide by insecticide by application type of insecticide were all significant for injury as well as yield. When chlorpyrifos was used both in-furrow and foliarly on corn treated with the tembo premix, injury was increased to 56% and yield was reduced 58% compared with corn that had not been treated with that insecticide. This use pattern of chlorpyrifos utilized in-furrow followed by chlorpyrifos applied foliarly with the tembo premix essentially doubled the injury (29 to 56%) and increased yield loss from 41% where chlorpyrifos was only utilized foliarly to 49% when chlorpyrifos was applied in-furrow and foliarly. Corn injury was negligible (< 6%) and yield was similar where the meso premix was examined in combination of both types of insecticide applications. This study clearly demonstrated the phytotoxic interaction between these two herbicide premixes and the OP insecticide chlorpyrifos. Therefore, growers need to be mindful of which herbicides are utilized when OP insecticides are used for insect management.

Four field experiments were conducted in Louisiana and Mississippi in 2009 and 2010 to evaluate POST herbicides treatments with tembotrione applied alone or as a prepackaged mixture with thiencarbazone for weed control in corn. Treatments included tembotrione at 92 g ai ha−1, thiencarbazone : tembotrione at 15 : 76 g ai ha−1, atrazine at 2,240 g ai ha−1, glufosinate at 450 g ai ha−1, glyphosate at 860 g ae ha−1, and coapplications of tembotrione or thiencarbazone : tembotrione with atrazine, glufosinate, or glyphosate. All treatments were applied to 26-cm corn in the V4 growth stage. Treatments containing thiencarbazone : tembotrione and those with tembotrione controlled barnyardgrass, browntop millet, entireleaf morningglory, hophornbeam copperleaf, johnsongrass, Palmer amaranth, and velvetleaf 85 to 96% and 43 to 97% 28 d after treatment and at corn harvest, respectively. Corn yield ranged from 9,200 to 10,420 kg ha−1 and was greater than the nontreated control following all herbicide treatments, except atrazine alone. Results indicated that thiencarbazone : tembotrione or tembotrione POST is an option for weed management in corn, and applications of thiencarbazone : tembotrione would be strongly encouraged where rhizomatous johnsongrass is problematic.

As auxin-type herbicide-resistant crops become commercially available, nozzle selection will become a highly important variable for maintaining efficacy of herbicide solutions while minimizing off-target movement. Field experiments were conducted in 2013 and 2014 in Keiser, AR, to evaluate interactions among the N,N-bis-(aminopropyl)methylamine form of dicamba formulated as Engenia™, the potassium salt of glyphosate formulated as Roundup PowerMax®, and glufosinate formulated as Liberty® applied with three different nozzle types. Three TeeJet nozzles with an 11004 orifice (Turbo TeeJet [TT], Air Induction Extended Range [AIXR], and Turbo TeeJet Induction [TTI]) were used. To supplement the field data, droplet spectra for each nozzle and tank mixture combination were determined at the West Central Research and Extension Center in North Platte, NE. For most herbicide treatments and nozzle combinations, Palmer amaranth control 4 wk after treatment was > 95% both years. In 2013, TT nozzles provided 96% control of barnyardgrass and TTI nozzles provided 89% control, averaged across herbicides, except for Engenia alone. A similar effect of nozzle selection was observed in 2014. When treatments were applied to 20-cm-tall barnyardgrass in 2014, compared with 8-cm-tall plants in 2013, an antagonistic effect was observed when Engenia was tank-mixed with Roundup PowerMax. The weed control data correlated with the droplet spectrum analysis such that as volume median diameter (Dv50) increased from TT nozzles to the TTI nozzles, efficacy decreased for most tank mixtures. Results from the droplet analysis showed that Dv50 relative to water decreased for Liberty alone and not when tank-mixed with Engenia or Roundup PowerMax. These results suggest that nozzle selection will play a key role in maximizing efficacy of POST applications in dicamba-resistant crops. Additionally, evaluating droplet spectra of potential dicamba-containing tank mixtures is critical for producing desired droplet size to minimize off-target movement.

Field experiments were conducted at two locations in Missouri in 2012 and 2013 to evaluate herbicide programs in 4-hydroxyphenylpyruvate dioxygenase (HPPD)-inhibitor-resistant soybean, referred to as FG72 soybean, and their tolerance to four HPPD-inhibiting herbicides. At the Columbia location, PRE followed by (fb) POST and two-pass POST treatments provided 97% or greater control of all weeds except ivyleaf morningglory. At Moberly in 2012, PRE fb POST treatments provided 95% or greater control and 100% biomass reduction (BR) of glyphosate-resistant (GR) waterhemp, with the exception of isoxaflutole at 0.04 kg ha−1 plus S-metolachlor at 0.6 kg ha−1 plus metribuzin at 0.2 kg ha−1. In 2013, PRE fb POST treatments provided greater than 89% control and 93% BR. Two-pass POST treatments of isoxaflutole plus glyphosate always provided greater control and BR of GR waterhemp compared with glyphosate fb glyphosate. However, at Columbia, where glyphosate-susceptible weeds were present, there were no differences in control or BR between two-pass POST treatments. In the soybean tolerance experiment, isoxaflutole provided the lowest levels of injury. Applications of tembotrione at the 1× rate resulted in the greatest injury in both years. Topramezone at the 1× rate always provided less injury than tembotrione, but was always similar in BR. The 2× rates increased soybean injury over the 1× rate for the third trifoliate (V3) application, but not for the PRE and first-flower (R1) applications. V3 and R1 applications of isoxaflutole and mesotrione resulted in similar injury, height reduction, and BR to soybean 28 d after application in 2012 and 2013. Overall these results indicate that FG72 soybean could allow the use of HPPD-inhibiting herbicides such as mesotrione PRE along with isoxaflutole PRE and POST to provide an additional herbicide mechanism of action that was not previously available in soybean.

Field experiments were conducted in 2011 through 2013 at the MSU Southern Agricultural Research Center near Huntley, MT, to evaluate the effectiveness of various PRE and POST herbicide programs for kochia control in the absence of a crop. PRE herbicides labeled for corn, grain sorghum, soybean, wheat/barley, and/or in chemical fallow were applied at recommended field-use rates. Acetochlor + atrazine, S-metolachlor + atrazine + mesotrione, and sulfentrazone applied PRE provided ≥91% control of kochia at 12 wk after treatment (WAT). Metribuzin, metribuzin + linuron, and pyroxasulfone + atrazine PRE provided 82% control at 12 WAT. PRE control with acetochlor + flumetsulam + clopyralid, pyroxasulfone alone, and saflufenacil + 2,4-D was ≤23% at 12 WAT. Paraquat + atrazine, paraquat + linuron, and paraquat + metribuzin controlled kochia ≥98% at 5 WAT. POST control with bromoxynil + fluroxypyr, paraquat, tembotrione + atrazine, and topramezone + atrazine treatments averaged 84% at 5 WAT, and did not differ from glyphosate. Control with POST-applied bromoxynil + pyrasulfotole, dicamba, diflufenzopyr + dicamba + 2,4-D, saflufenacil, saflufenacil + 2,4-D, saflufenacil + linuron was 67 to 78% at 5 WAT. Because of the presence of kochia resistant to acetolactate synthase-inhibiting herbicides at the test site, cloransulam-methyl was not a viable option for kochia control. In a separate greenhouse study, kochia accessions showed differential response to the POST herbicides (labeled for corn or soybean) tested. Tembotrione + atrazine, topramezone + atrazine, lactofen, or fomesafen effectively controlled the glyphosate-resistant kochia accession tested. Growers should utilize these effective PRE- or POST-applied herbicide premixes or tank mixtures (multiple modes of action) to control herbicide-resistant kochia accessions in the field. PRE herbicides with 8 wk of soil-residual activity on kochia would be acceptable if crop competition were present; however, a follow-up herbicide application may be needed to obtain season-long kochia control in the absence of crop competition.

Research was conducted to compare cotton and tomato response to volatility of 2,4-D, dicamba, and triclopyr formulations. Herbicide treatments were applied to tilled soil during August and September, and potted plants were placed in the center of treated strips. To quantify injury, leaf cupping/crinkling/drooping; leaf rolling/strapping; stem epinasty; and stem swelling/cracking were each visually rated on an injury scale of 0 to 5 (0 = none, 1 = slight, 2 = slight to moderate, 3 = moderate, 4 = moderate to severe, and 5 = severe). Leaf cupping/crinkling/drooping injury averaged across herbicide treatments at 1× rates was 1.0 for cotton and 2.0 for tomato 14 d after treatment (DAT). Averaged across crops, leaf cupping/crinkling/drooping injury for the 1× rates 14 DAT was equivalent for the 2,4-D dimethylamine (DMA) salt, 2,4-D acid, dicamba DMA salt, dicamba diglycolamine (DGA) salt, dicamba acid, and triclopyr acid formulations and ranged from 1.1 to 1.8. For tomato, the only herbicide treatments with injury 14 DAT no greater than for the nontreated were 1× rates of 2,4-D DMA and 2,4-D acid for leaf rolling/strapping (1.0); 2,4-D acid, dicamba DMA, dicamba acid, and triclopyr acid for stem epinasty (0.3 to 0.7); and 2,4-D DMA, 2,4-D acid, dicamba DMA, dicamba DGA, dicamba acid, and triclopyr acid for stem swelling/cracking (0.1 to 0.2). A weighted factor assigned to each injury criterion provided an overall total injury estimate of 0 to 100%. When applied at 1× rates, total injury for 2,4-D isooctyl ester was 10% for cotton and 36% for tomato and for triclopyr butoxyethyl ester was 11% for cotton and 50% for tomato. For the 2,4-D DMA, 2,4-D acid, dicamba DMA, dicamba DGA, dicamba acid, and triclopyr acid formulations, total injury was 4 to 8% for cotton and 20 to 24% for tomato, and for both crops, injury was no greater than for the nontreated.

Biochar and vinasse are by-products of biofuel production that can be used as soil amendments. However, their addition to the soil might affect PRE herbicide activity. Although studies have shown that biochar has a high herbicide adsorption capacity, there is little information available about biochar effect on weed control especially under field conditions. Therefore, the objective of this study was to determine the influence of biochar and vinasse application on atrazine and pendimethalin availability and herbicide activity under in vitro and field conditions. In vitro atrazine and pendimethalin herbicidal activities were not influenced by vinasse addition, but biochar application reduced atrazine and pendimethalin injury for all evaluated species. A sorption experiment confirmed high affinity of biochar for atrazine and pendimethalin. Linear regression analysis showed that the slope for atrazine and pendimethalin adsorption was 16 and 4 times higher in soil with biochar than in soil alone. Under field conditions, biochar at 0.5 kg m−2 reduced atrazine and pendimethalin weed control 75% and 60%, respectively. These results suggested that the use of biochar as a soil amendment in cropping system could decrease PRE herbicide efficacy. Therefore, mitigating practices such as the use of higher rates or reliance on POST herbicides and cultivation might be necessary to ensure proper weed control.

Spring barley can be used to diversify and intensify winter wheat-based production systems in the U.S. Pacific Northwest. The objective of this study was to describe the effects of tillage system and weed management level (WML) on weed control and spring barley grain yield when grown in a winter wheat-spring barley-spring dry pea rotation. A long-term integrated pest management field study examined the effects of three WMLs (minimum, moderate, and maximum) and two tillage systems (conservation and conventional) on weed control and barley grain yield. Total weed biomass at harvest was 8.0 and 59.7 g m−2 for the maximum and minimum WMLs, respectively, in the conservation tillage system, but was similar and averaged 12.2 g m−2 for all three WMLs in the conventional tillage system. Despite greater weed biomass with minimum weed management in the conservation tillage system, barley grain yields averaged 5,060 and 4,780 kg ha−1 for the conservation tillage and conventional tillage systems, respectively. The benefits of conservation tillage require adequate herbicide inputs.

Soybean cyst nematode (SCN) is a major soybean yield–limiting disease in the United States. Henbit, a winter annual species common to no-till fields in the midwestern United States, is known to act as an alternative host for SCN. A simulation was performed to estimate how likely SCN was to reproduce on henbit roots during a 30-yr period in two important soybean production areas of Nebraska. Simulations were conducted using published information on henbit seedling emergence, SCN reproduction on henbit roots, and SCN response to soil temperature. Results indicate that SCN would be able to complete one generation on henbit roots under Nebraska conditions. The SCN reproductive cycle was not likely to be completed before the winter in south central Nebraska, but one SCN generation was predicted to be completed in the fall in 2 out of 30 simulation years (7% likelihood) in southeast Nebraska. Based on our predictions, to reduce the chances of SCN population build-up in the absence of its main host (soybean), weed management in fields infested with both henbit and SCN should be completed after crop harvest in the fall when most henbit seedlings have emerged and are growing but the SCN developing on henbit roots have not yet achieved full maturity in Nebraska.

Kochia, common lambsquarters, and wild buckwheat are major problem weeds in glyphosate-resistant corn production in the northern Great Plains of the United States. Field research was conducted in 2011 and 2012 near Huntley, MT to investigate effective PRE herbicides applied alone or in premixes with or without tank-mixed pendimethalin for extended in-season residual control of the selected broadleaf weeds in glyphosate-resistant corn. Control of kochia, common lambsquarters, and wild buckwheat with recently registered herbicide premixes, including saflufenacil + dimethenamid-P and S-metolachlor + mesotrione, was as high as 95 and 90% at 21 and 63 d after treatment (DAT), and mostly similar to the standard atrazine treatment. Residual control of common lambsquarters and wild buckwheat from pyroxasulfone was higher at 298 compared with 149 g ai ha−1 rate. Pyroxasulfone and other chloroacetamide herbicides (acetochlor or dimethenamid-P) applied alone failed to provide greater than 79, 70, and 54% residual control at 21, 35, and 63 DAT, respectively, of the weed species investigated. Residual weed control throughout the growing season was significantly improved with the addition of pendimethalin to pyroxasulfone (149 g ha−1), acetochlor, or dimethenamid-P when compared with any of the three herbicides applied alone. Kochia control by pyroxasulfone, acetochlor, or dimethenamid-P tank mixed with pendimethalin was as high as 94, 92, and 81% at 21, 35, and 63 DAT, respectively. Control of common lambsquarters with the addition of pendimethalin to pyroxasulfone or acetochlor was improved to 94, 89, and 81% at 21, 35, and 63 DAT, respectively. Similarly, wild buckwheat control with acetochlor plus pendimethalin was improved to 87, 85, and 82% at 21, 35, and 63 DAT, respectively. Consistent with the extended in-season (up to 9 wk) residual weed control, pyroxasulfone, acetochlor, or dimethenamid-P treatments when tank mixed with pendimethalin had higher corn yields compared with the herbicides applied alone. The investigation on residual herbicides that provide extended in-season weed control should be continued as an important aspect of glyphosate stewardship and to mitigate the occurrence of glyphosate-resistant weed populations in grower fields.

Field studies were conducted in Alabama, Arkansas, Georgia, Louisiana, Mississippi, North Carolina, and Tennessee during 2010 and 2011 to determine the effect of glufosinate application rate on LibertyLink and WideStrike cotton. Glufosinate was applied in a single application (three-leaf cotton) or sequential application (three-leaf followed by eight-leaf cotton) at 0.6, 1.2, 1.8, and 2.4 kg ai ha−1. Glufosinate application rate did not affect visual injury or growth parameters measured in LibertyLink cotton. No differences in LibertyLink cotton yield were observed because of glufosinate application rate; however, LibertyLink cotton treated with glufosinate yielded slightly more cotton than the nontreated check. Visual estimates of injury to WideStrike cotton increased with each increase in glufosinate application rate. However, the injury was transient, and by 28 d after the eight-leaf application, no differences in injury were observed. WideStrike cotton growth was adversely affected during the growing season following glufosinate application at rates of 1.2 kg ha−1 and greater; however, cotton height and total nodes were unaffected by glufosinate application rate at the end of the season. WideStrike cotton maturity was delayed, and yields were reduced following glufosinate application at rates of 1.2 kg ha−1 and above. Fiber quality of LibertyLink and WideStrike cotton was unaffected by glufosinate application rate. These data indicate that glufosinate may be applied to WideStrike cotton at rates of 0.6 kg ha−1 without inhibiting cotton growth, development, or yield. Given the lack of injury or yield reduction following glufosinate application to LibertyLink cotton, these cultivars possess robust resistance to glufosinate. Growers are urged to be cautious when increasing glufosinate application rates to increase control of glyphosate-resistant Palmer amaranth in WideStrike cotton. However, glufosinate application rates may be increased to maximum labeled rates when making applications to LibertyLink cotton without fear of reducing cotton growth, development, or yield.

Turfgrass injury from triazines has limited the use of photosystem II (PS II) inhibitors for weed control in seashore paspalum. Amicarbazone is a new PS II inhibitor with potential safety in seashore paspalum, but the effects of application timing on turf tolerance has received limited investigation. Field experiments were conducted in Griffin, GA to evaluate the tolerance of ‘Sea Isle 1’ seashore paspalum to amicarbazone applications in winter, spring, and summer. Seashore paspalum had minimal injury (< 5%) from amicarbazone treatments (98, 196, and 392 g ai ha−1) applied for annual bluegrass control in winter and spring. By 6 wk after treatment (WAT), amicarbazone at 392 g ha−1 provided 78 and 90% annual bluegrass control in 2013 and 2014, respectively, and was similar to pronamide at 1,680 g ai ha−1. Amicarbazone at 196 g ha−1 provided 71% control of annual bluegrass in 2014, but control was poor (< 70%) in 2013. Sequential amicarbazone applications at 98 g ha−1 provided poor control in both years by 6 WAT. From six amicarbazone rates (up to 984 g ha−1) applied in summer, seashore paspalum required 510 and < 123 g ha−1 for 20% turfgrass injury (I20) and 20% clipping reduction (CR20), respectively, whereas I20 and CR20 measured > 984 g ha−1 for ‘Tifway’ bermudagrass. Overall, amicarbazone may be safely applied to seashore paspalum in winter, spring, and summer at rates and regimens evaluated. However, seashore paspalum may exhibit shoot growth inhibition up to 4 WAT, suggesting that end users should be cautious when using amicarbazone during active growth in summer.

Field studies were conducted near Crowley, LA to evaluate the effects of simulated herbicide drift on ‘Cocodrie' rice. Each treatment was made with the spray volume varying proportionally to herbicide dosage based on a spray volume of 234 L ha−1 and a glufosinate rate of 493 g ai ha−1. The 6.3%, 31 g ha−1, herbicide rate was applied at a spray volume of 15 L ha−1 and the 12.5%, 62 g ha−1, herbicide rate was applied at a spray volume of 29 L ha−1. Glufosinate applied at one-tiller, panicle differentiation (PD) growth stage, and boot resulted in crop injury at 7 and 14 d after treatment. At 21 and 28 d after treatment, crop injury was still evident but was less than 10%. Glufosinate applied at one-tiller resulted in plant height reductions of 4 to 6%; however, at harvest, height reductions were 1% or less. Glufosinate applied to rice in the boot stage had lower rice yield in the primary crop, but no difference was observed in the ratoon crop. Harvested seed from the primary crop germinated 7 to 11% less than the nontreated when rice was treated with 31 and 62 g ha−1 of glufosinate. Seedling vigor was reduced when treated with 31 and 62 g ha−1 of glufosinate.

Volunteer Enlist corn with the AAD-1 (aryloxyalkanoate dioxygenase-1) transgene can become a problem when glyphosate-resistant (GR) soybean follows Enlist corn in the rotation. Field trials were conducted at Ridgetown, Ontario in 2013 and 2014 to evaluate the control of volunteer Enlist corn in GR soybean. Glyphosate plus clethodim at 30 g ai ha−1 provided 75 to 92% control of volunteer Enlist corn at 1, 2, 4, and 8 weeks after treatment application (WAT) and reduced volunteer Enlist corn density and dry weight 95 to 97%. Glyphosate plus clethodim at 60 g ai ha−1 provided 84 to 98% control of volunteer Enlist corn at 1, 2, 4, and 8 WAT and reduced volunteer Enlist corn density and dry weight 97 to 99%. Glyphosate plus sethoxydim at 150 g ai ha−1 provided 66 to 86% control of volunteer Enlist corn at 1, 2, 4, and 8 WAT and reduced volunteer Enlist corn density and dry weight 91 to 97%. Glyphosate plus sethoxydim at 300 g ha−1 provided 84 to 96% control of volunteer Enlist corn at 1, 2, 4, and 8 WAT and reduced volunteer Enlist corn density and dry weight 96 to 98%. Glyphosate plus fenoxaprop-p-ethyl, fluazifop-p-butyl, and quizalofop-p-ethyl applied POST provided 0 to 9% control of volunteer Enlist corn at 1, 2, 4, and 8 WAT and reduced volunteer Enlist corn density and dry weight 18 to 44%. Soybean yields closely reflected the level of volunteer Enlist corn control. Based on these results, the cyclohexanedione herbicides, clethodim and sethoxydim, provide adequate control of volunteer Enlist corn in GR soybean. In contrast, the aryloxyphenoxypropionate herbicides, fenoxaprop-p-ethyl, fluazifop-p-butyl and quizalofop-p-ethyl do not provide control of volunteer Enlist corn in GR soybean.

The development of glyphosate-resistant canola has provided improved weed-management options for growers, but crop tolerance to glyphosate may be inadequate at later growth stages. In this study, glyphosate-resistant canola 45H28 (RR) was used to determine the effects of glyphosate application timing on yield and yield components at several sites in western Canada. Canola received a single glyphosate applications at the two-leaf, six-leaf, bolting, and early bloom stages and sequential applications at the two-leaf + six-leaf, two-leaf + bolting, and two-leaf + early bloom stages. Contrasts were made between early vs. late, single vs. sequential, and on-label (two to six-leaf stage) vs. off-label (above six-leaf stage). In general, differences between application timings were observed for yield and yield components in 3 of 8 site-yr. Off-label applications of glyphosate (later than six-leaf) significantly decreased yield, seeds per pod, and increased thousand-seed weight and aborted pods in canola at the Lethbridge and St. Albert locations. Increased glyphosate translocation because of adequate, but not excessive, moisture to new growth may have suppressed new seed formation and encouraged pod abortion at the time of application in the 2010 and 2011 seasons. Results from this experiment demonstrate the importance of proper application timing of glyphosate on canola and can help better predict the effects of late applications.