Decrespignyite-(Y) is a new copper yttrium rare earth carbonate chloride hydrate from the Paratoo copper mine, near Yunta, Olary district, South Australia. Decrespignyite-(Y) occurs as blue crusts, coatings and fillings in thin fissures on the slatey country rock. Individual pseudohexagonal platelets are typically 10–50 µm in maximum dimension and are often curved. Associated minerals include caysichite-(Y), donnayite-(Y), malachite and kamphaugite-(Y). Electron microprobe and CHN analyses gave: Y2O3 42.2; La2O3 0.1; Pr2O3 0.1; Nd2O3 1.3; Sm2O3 1.0; Gd2O3 4; Tb2O3 0.4; Dy2O3 3.7; Ho2O3 2.6; Er2O3 2.5; CaO 0.5; CuO 10.9; Cl 3.0; CO2 19.8; H2O 10.8, yielding an empirical formula of (Y3.08Gd0.22Dy0.16Ho0.11Er0.10Nd0.06Sm0.05Tb0.02La0.02Pr0.01Ca0.08)∑3.91Cu1.12(CO3)3.70-Cl0.7(OH)5.79·2.4H2O. The simplified formula is (Y,REE)4Cu(CO3)4Cl(OH)5·2H2O. The mineral is royal blue to turquoise-blue in colour, transparent, with a pearly to vitreous lustre and a pale blue streak. No cleavage was observed but the morphology suggests that cleavage would be on [010]. The Mohs' hardness is estimated to be 4. The strongest lines in the X-ray powder pattern are {dobs (Iobs) (hkl)} 22.79 (30) (010); 7.463 (30) (001); 7.086 (50) (011); 6.241 (100) (021); 4.216 (30) (12); 3.530 (40) (022); 3.336 (30) (032); 2.143 (30) (222, 01). The powder diffraction pattern was indexed on a monoclinic cell with a = 8.899(6), b = 22.77(2), c = 8.589(6)Å, β = 120.06(5)°, V = 1506.3(7) Å3 and Z = 4. The structure of the new mineral could not be determined but powder diffraction data indicate the space group is P2, Pm or P2/m. The measured density is 3.64(2) g/cm3 and the calculated density is 3.645 g/cm3. Decrespignyite-(Y) is biaxial negative with α = 1.604(4) and γ = 1.638(3) with β very close to γ pleochroism is medium strong; X very pale bluish, Y and Z bluish (with greenish tint). Decrespignyite-(Y) is a supergene mineral which precipitated from mildly basic carbonated ground waters. The mineral is named after Robert Champion de Crespigny, a prominent figure in the Australian mining industry and chancellor of the University of Adelaide.

A deposit of chrysoberyl (BeAl2O4), including the variety alexandrite, occurs near Dowerin, in the southwestern region of the Archaean Yilgarn Craton, Western Australia. The deposit is situated in the northern part of the Lake Grace Terrain, a crustal component of the southwestern Yilgarn Craton, in granulite-facies gneisses (2640–2649 Ma; T = 700°C, P <6 kbar) adjacent to the margin of the Kellerberrin Batholith (2587±25 Ma). Beryllium mineralization at Dowerin occurs in plagioclase-quartz-biotite-garnet gneiss and cross-cutting tourmaline-plagioclase veins situated adjacent to lenses of actinolite-cummingtonite-phlogopite schist. Crystals of chrysoberyl (0.15–1.74 wt.% Cr2O3; 2.25–3.23 wt.% FeO; trace–0.13 wt.% ZnO; SiO2 <0.05 wt.%) are found embedded in almandine or plagioclase, and closely intergrown with biotite and/or zincian hercynite in the host-rock gneiss. Minor Cr and Fe in the alexandrite variety of chrysoberyl were possibly derived from associated zincian hercynite and/or almandine. Trace beryl (0.04–0.20 wt.% Cr2O3; 0.54–0.71 wt.% FeO; trace– 0.22 wt.% Na2O; 0.1–0.71 wt.% MgO) occurs as anhedral interstital grains between crystals of chrysoberyl, plagioclase and biotite, and as rare inclusions in chrysoberyl. Textural and mineral chemical evidence suggests that chrysoberyl and zincian spinels (chromite to hercynite containing from 2–8 wt.% ZnO) formed during granulite-facies regional metamorphism and probably pre-dated the formation of metamorphic tourmaline-plagioclase veins during the same metamorphic episode. The Be, B and Zn required to form chrysoberyl, beryl, tourmaline and zincian spinels may have been released by metamorphic reactions in host-rock metapelites during prograde granulite-facies metamorphism.

The volume proportions of the mineral phases in two strongly deformed olivine-orthopyroxene rocks have been quantified by whole-pattern stripping of fixed geometry X-ray powder diffraction data. The results were compared with the phase proportions as determined by Rietveld refinement of time-of-flight neutron powder diffraction data, and were shown to be in excellent agreement. The X-ray technique not only provides a very rapid and cost-effective method of determining phase proportions, but it also circumvents several of the problems associated with obtaining this information by image analysis. Moreover, the technique is particularly advantageous in strongly textured rocks or in rocks that contain significant residual strains. As such it offers a powerful technique for analysing the mineralogical composition of fine-grained and/or deformed experimental run products, which makes it of considerable potential for monitoring in situ the progress of mineral reactions during laboratory experiments.

An orbicular diorite from Fisher Lake, California, USA, contains multi-shelled, magmatic orbicules with branching and budding orthopyroxene crystals as well as feather and acicular plagioclase crystals that are oriented perpendicular to the growth horizon. Plagioclase and orthopyroxene show gradual, reverse compositional zoning along the long axes and normal zoning along the short axes. The reverse zoning varies from An87 to An93 and Mg68 to Mg74 over distances of 4 mm and 8 mm respectively. The close proximity of these two minerals makes it likely that only one mechanism is responsible for the reverse zoning. This zoning can be explained by using relevant temperature-composition diagrams and Gibbs free energy-composition plots. Under sudden and moderate undercoolings, which produce high growth but low nucleation rates, the difference in Gibbs free energy (ΔG) between the crystals and liquid is not initially maximized, i.e. initial compositions are not near-to-equilibrium. This results in crystal compositions that are closer to that of the bulk liquid than expected for crystallization under near-to-equilibrium conditions (i.e. very small ΔT). Over time, and under isothermal crystallization conditions, ΔG gradually increases to a maximum producing crystal compositions that also gradually attain near-to-equilibrium compositions. Subsequent to attaining these conditions, normal zoning occurs perpendicular to the crystal growth axes.

The compositions of fluid inclusions hosted in emerald and quartz (the Maria deposit, Mozambique) were studied using microthermometric and Raman microprobe techniques. The fluid inclusions in the emerald contain fluids within the Na-Ca-Mg-(HCO3)−-(CO3)2−-Cl-H2O system saturated in carbonic acid brines. Nahcolite is a main daughter solid phase within the fluid inclusions. The mean nahcolite and NaCl contents are 25 and 5 wt.%, respectively. Mg-calcite, magnesite, calcite and aragonite are also identified as daughter phases in the fluid inclusions. Many fluid inclusions show necked-down appearance. Groups of nahcolite crystals often make up ∼50 vol.% of necked-down inclusions. It seems that zones of fluid inclusions with numerous birefringent solid phases are distinctive of the Maria emerald deposit. The likely conditions of emerald growth are 400 < T < 500°C and 3 < P < 4 kbar.

Piston-cylinder cell assemblies experience inhomogeneous pressure distribution upon pressurization due to the variable compressibilities of the cell components. This results in the sample experiencing a pressure lower than expected, given the applied force of the piston. Although the effect is generally compensated for by applying a ‘friction’ correction, there have been wide variations in the corrections applied for some of the harder cell materials. We have determined friction correction factors for a range of cell assemblies commonly used in our laboratory relative to select well-characterized phase equilibria. Single-sleeve NaCl cells require, using the piston-in technique, very small corrections of the order −0.05 GPa for 12.7 mm diameter, and less for larger diameter assemblies. Four separate calibrations of the single sleeve 12.7 mm BaCO3 cell show that it requires a correction of −9%. This factor is entirely independent of temperature and pressure within the range 1000 to 1600°C and 1.5 to 3.2 GPa. This result is in contrast to the results of Fram and Longhi (1992) who claim that the correction for BaCO3 cells is highly dependent on pressure. For the assemblies included in this study there is an increase in the pressure correction required in the order of 12.7 mm diameter NaCl-pyrex −3%; 19 mm talc-pyrex −3.6%; 12.7 mm BaCO3 −9% and 12.7 mm BaCO3-silica glass −13%.

Massive chromitite, banded chromitite and disseminated chromite grains are found in a ˜3800 Ma layered ultrabasic body in West Greenland. The major part of the ultrabasite is dominated by dunite. In the upper exposed part, harzburgite and sheets of gabbro-anorthosite occur. Chromite grains in dunites, and in massive and banded chromitites are homogeneous, with increasing Fe contents upwards in the intrusion. In harzburgites chromites show unusual and very complex textural relationships, with two generations ofchromites one replacing the other, and both exhibiting exsolution textures. In harzburgites, an Fe-rich chromite crystallized first. This first chromite exsolved two spinel phases in a very fine-scale pattern and ilmenite lamellae in a trellis pattern. The Fe-rich chromite was later partly replaced by Al-rich chromite, which crystallized contemporaneously with formation of a late gabbro-anorthositic melt. Subsequently, the Al-rich chromite exsolved a very fine-scale magnetite-rich phase. The exsolutions in the first generation chromite were formed under magmatic conditions. Exsolution of ilmenite lamellae in Fe-rich spinel was caused by oxidation under magmatic conditions.

Tetrahedrite fahlores from the Coeur d'Alene mining district (Idaho) have been found to be enriched in Ag by the Ag–Cu exchange reaction

which occurred during cooling following galena mineralization. This solid–state reaction resulted in quantitative removal of Ag (in a AgSbS2 component) from galena and development of bournonite coronas on fahlore grains. The reaction produced a distinct population of high-Ag fahlores found in galena-rich samples and accounts for all of the bournonite mineralization. The most argentian of these high-Ag fahlores examined in this study (molar Ag/(Ag+Cu) = 0.303±0.011 and 0.336±0.011) are found in samples which achieved saturation with respect to other Ag-sulfosalts, namely pyrargyrite and polybasite and diaphorite, respectively. Multiple lines of evidence for the Ag-Cu exchange reaction are presented in this paper which applies mass-balance constraints and a thermodynamic database for sulfides/sulfosalts to microprobe analyses and textural observations, and to bulk production data. This solid-state reaction may explain why previous district studies have been unable to demonstrate convincingly primary fahlore zoning. Based on the Ag/(Ag+Cu) of fahlores coexisting with other Agsulfosalts and Fe-Zn partitioning between fahlore and sphalerite, we estimate that fahlore compositions were frozen in by 175°C. Examining the composition data for other Ag tetrahedrite fahlores found in the Coeur d'Alene district and elsewhere, we conclude that the thermodynamic database provides an accurate description of phase equilibria, except possibly for very Fe-rich systems where further studies of the Fe-Zn partitioning between fahlore and Fe-rich (Zn,Fe)S phases and of the thermodynamics of Fe-rich (Zn,Fe)S phases are warranted.