For a graph G and a family of graphs $\mathcal {F}$, the Turán number ${\mathrm {ex}}(G,\mathcal {F})$ is the maximum number of edges an $\mathcal {F}$-free subgraph of G can have. We prove that ${\mathrm {ex}}(G,\mathcal {F})\ge {\mathrm {ex}}(K_r, \mathcal {F})$ if the chromatic number of G is r and $\mathcal {F}$ is a family of connected graphs. This result answers a question raised by Briggs and Cox [‘Inverting the Turán problem’, Discrete Math. 342(7) (2019), 1865–1884] about the inverse Turán number for all connected graphs.

Due to the merits of high rigidity and good dynamics, hybrid machine tools have been gradually applied to efficient machining of thin-walled workpiece with complex geometries. However, the discontinuity of tangential component of toolpath in hybrid machine tools may cause velocity fluctuations, leading to poor surface quality of workpiece. In this paper, a novel 5-axis hybrid machine tool is taken as an example to demonstrate a smooth toolpath interpolation method. First, an adaptive acceleration and deceleration control algorithm is presented to realize the smooth transition between two constrained velocity points. Second, a spline curve-based interpolation algorithm is proposed to realize the smoothness of the trajectory. Meanwhile, a parameter synchronization method is proposed to ensure the synchronization of the interpolated tool-axis vector and the interpolated tool tip. Thirdly, an inverse kinematic analysis is conducted based on an inverse position solution model and a velocity mapping model. Finally, a set of machining tests on S-shape workpiece in line with the ISO standard is carried out to verify the effectiveness of the proposed smooth toolpath interpolation method.

Pyroptosis is a recently identified mechanism of programmed cell death related to Caspase-1 that triggers a series of inflammatory reactions by releasing several proinflammatory factors such as IL-1β and IL-18. The process is characterised by the rupture of cell membranes and the release of cell contents through the mediation of gasdermin (GSDM) proteins. GSDMD is an important member of the GSDM family and plays a critical role in the two pathways of pyroptosis. Diabetic nephropathy (DN) is a microvascular complication of diabetes and a major cause of end-stage renal disease. Recently, it was revealed that GSDMD-mediated pyroptosis plays an important role in the occurrence and development of DN. In this review, we focus on two types of kidney cells, tubular epithelial cells and renal podocytes, to illustrate the mechanism of pyroptosis in DN and provide new ideas for the prevention, early diagnosis and molecular therapy of DN.

As the remnant of the South Qilian Ocean, the South Qilian suture zone recorded abundant information on the Cambrian–Ordovician subduction history of the southern branch of the Proto-Tethyan Ocean. However, the closure timing of the South Qilian Ocean and subsequent collision are poorly constrained. In this study, we report early Silurian (433–435 Ma) U–Pb ages of felsic subvolcanic rocks from Lianhuashan, Ayishan and Shihuiyao of the Lajishan district within the South Qilian suture zone. They intruded the Late Ordovician – Silurian sedimentary or Late Ordovician volcanic rocks and have high SiO2 (61.43–73.06 wt%), Sr/Y ratios with significant different rare earth elements (REEs) and trace-element spider diagrams, and Sr–Nd isotopic compositions, probably implying that they were formed through distinctly different generation mechanisms. Geochemistry of the Lianhuashan dacites reveals compositions typical of adakitic rocks derived from partial melting of lower crust in a thickened setting. The Ayishan dacites were derived from partial melting of crustal materials with the involvement of minor peridotite mantle, and the Shihuiyao rhyolites were derived from partial melting of felsic crust. The similar geochemical characteristics of coeval post-collisional igneous rocks in the Central Qilian and South Qilian blocks indicates that the lower Silurian subvolcanic rocks were generated in a thickened crust of post-collisional setting. Considering their intrusive contacts with Late Ordovician – Silurian retro-foreland basin and Late Ordovician collisional volcanic rocks, we propose that the South Qilian suture zone was at a transitional stage from collisional to post-collisional during the early Silurian Period.

Novel NiMoO4-integrated electrode materials were successfully prepared by solvothermal method using Na2MoO4·2H2O and NiSO4·6H2O as main raw materials, water, and ethanol as solvents. The morphology, phase, and structure of the as-prepared materials were characterized by SEM, XRD, Raman, and FT-IR. The electrochemical properties of the materials in supercapacitors were investigated by cyclic voltammetry, constant current charge–discharge, and electrochemical impedance spectroscopy techniques. The effects of volume ratio of water to ethanol (W/E) in solvent on the properties of the product were studied. The results show that the pure phase monoclinic crystal NiMoO4 product can be obtained when the W/E is 2:1. The diameter and length are 0.1–0.3 µm and approximately 3 µm, respectively. As an active material for supercapacitor, the NiMoO4 nanorods material delivered a discharge specific capacitance of 672, 498, and 396 F/g at a current density of 4, 7, and 10 A/g, respectively. The discharge specific capacitance slightly decreased from 815 to 588 F/g with a retention of 72% after 1000 cycles at a current density of 1 A/g. With these superior capacitance properties, the novel NiMoO4 integrated electrode materials could be considered as promising material for supercapacitors.

The predictability of modified constitutive model, based on Arrhenius type equation, for illustrating the flow behavior of Fe–36%Ni Invar alloy was investigated via isothermal hot compression tests. The hot deformation tests were carried out in a temperature range of 850–1100 °C and strain rates from 0.01 to 10 s−1. True stress-true strain curves exhibited the dependence of the flow stress on deformation temperatures and strain rates, which then described in Arrhenius-type equation by Zener–Holloman parameter. Moreover, the related material constants and hot deformation activation energy (Q) in the constitutive model were calculated by considering the effect of strain as independent function on them and employing sixth polynomial fitting. Subsequently, the performance of the modified constitutive equation was verified by correlation coefficient and average absolute relative error which were estimated in accordance with experimental and predicted data. The results showed that the modified constitutive equation possess reliable and stable ability to predict the hot flow behavior of studied material under different deformation conditions. Meanwhile, Zener–Holloman parameter map was established according to the modified constitutive equation and used to estimate the extent of dynamic recrystallization.

An effective multiplex real-time polymerase chain reaction (PCR) assay for the simultaneous detection of three major pathogens, Nosema bombycis Nägeli (Microsporidia: Nosematidae), Bombyx mori nucleopolyhedrovirus (Baculoviridae: genus Alphabaculovirus) (NPV), and Bombyx mori densovirus (Parvoviridae: genus Iteravirus) (DNV), in silkworms (Bombyx mori (Linnaeus); Lepidoptera: Bombycidae) was developed in this study. Polymerase chain reaction and real-time PCR tests and basic local alignment search tool searches revealed that the primers and probes used in this study had high specificities for their target species. The ability of each primer/probe set to detect pure pathogen DNA was determined using a plasmid dilution panel, in which under optimal conditions the multiplex real-time PCR assay showed high efficiency in the detection of three mixed target plasmids with a detection limit of 8.5×103 copies for N. bombycis and Bombyx mori NPV (BmNPV) and 8.5×104 copies for Bombyx mori DNV (BmDNV). When the ability to detect these three pathogens was examined in artificially inoculated silkworms, our method presented a number of advantages over traditional microscopy, including specificity, sensitivity, and high-throughput capabilities. Under the optimal volume ratio for the three primer/probe sets (3:2:2=N. bombycis:BmNPV:BmDNV), the multiplex real-time PCR assay showed early detection of BmNPV and BmDNV by day 1 post inoculation using DNA templates of the three pathogens in various combinations from individually infected silkworms; the early detection of N. bombycis was possible by day 3 post inoculation using the DNA isolated from the midgut of N. bombycis-infected silkworms.

Using phytolith analysis from a well-dated and high-resolution sediment sequence in the apex of northern Yangtze Delta, we investigate environmental changes, the rise and decline of rice exploitation and possible impacts of environment on rice exploitation during the early mid-Holocene. The phytolith sequence documents a relatively warm and dry interval during ca.9000 to 8200 cal yr BP, followed by climatic amelioration before 7200 cal yr BP. Phytolith evidence indicates that rice exploitation at the apex of northern Yangtze Delta began at 8200 cal yr BP, flourished by 7700 cal yr BP and ceased after 7400 cal yr BP. The first emergence of marine diatom species approximately 7300 cal yr BP likely indicates an accelerated sea-level rise. The apparent correlation of the initiation of rice exploitation with climatic amelioration during the early mid-Holocene suggests that climatic changes may have played an important role in facilitating rice exploitation. Both the ideal climatic conditions and stable sea level enabled flourishing rice exploitation during 8200 to 7400 cal yr BP. Although the climate remained warm and wet after 7400 cal yr BP, local sea-level rise possibly led to the termination of earlier rice exploitation at this site of the northern Yangtze Delta.

In this study, a mesoscale dislocation simulation method was developed to study the orthogonal cutting of titanium alloy. The evolution of surface grain structure and its effects on the surface mechanical properties were studied by using two-dimensional climb assisted dislocation dynamics technology. The motions of edge dislocations such as dislocation nucleation, junction, interaction with obstacles, and grain boundaries, and annihilation were tracked. The results indicated that the machined surface has a microstructure composed of refined grains. The fine-grains bring appreciable scale effect and a mass of dislocations are piled up in the grain boundaries and persistent slip bands. In particular, dislocation climb can induce a perfect softening effect, but this effect is significantly weakened when grain size is less than 1.65 μm. In addition, a Hall–Petch type relation was predicted according to the arrangement of grain, the range of grain sizes and the distribution of dislocations.

For wheeled mobile robots moving in rough terrains or uncertain environments, driving failure will be encountered when trafficability failure occurs. Continuous mobility of mobile robots with special ability for overcoming driving failure on rough terrain has rarely been considered. This study was conducted using a four-wheel-steering and four-wheel-driving mobile robot equipped with a binocular visual system. First, quasi-static force analysis is carried out to understand the effects of different driving-failure modes on the mobile robot while moving on rough terrain. Secondly, to make the best of the rest of the driving force, robot configuration transformation is employed to select the optimal configuration that can overcome the driving failure. Thirdly, sliding mode control based on back-stepping is adopted to enable the robot achieve continuous trajectory tracking with visual feedback. Finally, the efficacy of the presented approach is verified by simulations and experiments.

A series of Ag2S/Ag2WO4 composite microrods with different Ag2S contents (10–50 wt%) were synthesized via a facile successive precipitation route. The texture and optical properties of the pure Ag2S, Ag2WO4, and Ag2S/Ag2WO4 composites were intensively characterized by some physicochemical characterizations like N2 physical adsorption, x-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, Ultraviolet–visible spectroscopy, x‐ray photoelectron spectroscopy, photoluminescence spectroscopy, and photocurrent measurements. Under visible light irradiation, different organic dyes, e.g., methylene blue and methyl orange dye were applied to evaluate the photocatalytic performances by their photocatalytic degradation reactions. The Ag2S/Ag2WO4 composite microrods exhibited superior photocatalytic activity and stability. The high crystallinity of Ag2WO4 and improved texture properties of Ag2S/Ag2WO4 resulted in their enhanced photocatalytic property. More importantly, the Ag2S/Ag2WO4 heterojunctions with matching electronic band structures obviously enhanced the separation of photo‐generated electrons and holes, further promoting the photocatalytic reaction.

This study aimed to compare the neonatal outcomes of transplanted fifth day (D5) or sixth day (D6) frozen–thawed blastocysts, aiming to provide guidance when choosing blastocyst recovery methods. The clinical data of 1109 patients that were performed for recovered blastocyst transplantation, as well as the data of 515 patients who had already delivered were analyzed retrospectively. The patients were divided into single- or twins-birth groups according to blastocyst formation time (D5 or D6) and the number of fetus(es). The implantation rate, clinical pregnancy rate and live birth rate of the D5 group were all significantly higher than those in the D6 group (P < 0.05), and the biochemical pregnancy rate in the D5 group was significantly lower than that in the D6 group (P = 0.049). Other factors, including birth weight, birth length, incidence of low birth weight and sex ratio, differed between the D5 and D6 groups, but the difference was not statistically significant (P > 0.05). In conclusion, the implantation rate, clinical pregnancy rate and live birth rate in the D5 group were all significantly higher than that in the D6 group. The birth weight at D6 was prone to be heavier no matter the birth group, and the sex ratio in the D5 group was higher than that at D6, the difference in neonatal outcomes between the two groups was not statistically significant.

The exact mechanism of ethanol's effects on glucose tolerance has not been well determined. The present study focuses for the first time on hypoxia and low-grade inflammation in adipose tissue (AT). In the in vivo experiments, twenty-four male Wistar rats were randomly allocated into control and ethanol feeding groups. Ethanol-treated rats received edible ethanol once a day at a total dosage of 5 g/kg per d, and the controls received distilled water. Ethanol volumes were adjusted every week. At the end of 8 weeks, we carried out an oral glucose tolerance test. Blood and AT were collected for measuring hypoxia-inducible factor-1α (HIF-1α), GLUT1, TNF-α, IL-6, leptin and vascular endothelial growth factor (VEGF). In the in vitro experiments, differentiated OP9 adipocytes were incubated with 100 mm of ethanol for 48 h; the media and cells were then collected for measuring HIF-1α, GLUT1, TNF-α and IL-6. The results showed that long-term ethanol consumption impaired glucose tolerance in rats. Ethanol consumption had little influence on body weight, but both epididymal and perirenal AT were markedly enlarged in the ethanol-treated rats as compared to the controls. Visceral adipose tissue (VAT) had accumulated, and the protein levels of HIF-1α and GLUT1, the indicators of hypoxia in rat epididymal AT and OP9 adipocytes, were elevated. Secondary to the AT hypoxia, the levels of inflammation-related adipokines, such as TNF-α, IL-6, leptin and VEGF, were increased. Based on these findings, we conclude that VAT hypoxia and low-grade inflammation might be a new mechanism in the treatment of ethanol-related diabetes.

Yang L, Ruan L-M, Ye H-H, Cui H-B, Mu Q-T, Lou Y-R, Ji Y-X, Li W-Z, Sun D-H, Chen X-B. Depression is associated with lower circulating endothelial progenitor cells and increased inflammatory markers.

Objective: To test the hypothesis that depression status in subjects without cardiovascular diseases (CVD) or diabetes is associated with depletion of circulating endothelial progenitor cells (EPCs) and impaired endothelial function.

Method: Thirty depressive persons with the first episode of depression (case group) diagnosed according to Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV) and 30 healthy people (control group) were investigated. The depression status was estimated using Hamilton Rating Scale of Depression from which the criteria of depression are determined to be >21 score. EPCs labeled with CD34-ECD, CD133-phycoerythrin and kinase insert domain receptor (KDR)-fluorescein isothiocyanate antibodies were counted by flow cytometry in the peripheral blood of patients and control subjects. Mononuclear cells that were positive for CD34/KDR, CD133/KDR and CD34/CD133/KDR within the lymphocyte population were characterised as different phenotypes of EPCs.

Results: There were no significant differences in baseline clinical characteristics between patients and healthy individuals (all p > 0.05). However, patients with depression had significantly lower levels of circulating CD34+CD133+KDR+ EPCs (132.20 ± 17.27 vs. 225.93 ± 9.88, p = 0.000) and endothelial colony-forming units (26.40 ± 3.79 vs. 36.60 ± 2.88, p = 0.000) than that of healthy subjects. Furthermore, CD34+CD133+KDR+ EPCs had a negative correlation with tumour necrosis factor-α (Spearman's ρ = 0.433, p = 0.000) and interleukin-6 (Spearman's ρ = 0.441, p = 0.032).

Conclusion: Our result shows that depression was associated with lower levels of circulating EPCs, which may contribute to the development of endothelial dysfunction and atherosclerosis.