We describe a hybrid pixel array detector (electron microscope pixel array detector, or EMPAD) adapted for use in electron microscope applications, especially as a universal detector for scanning transmission electron microscopy. The 128×128 pixel detector consists of a 500 µm thick silicon diode array bump-bonded pixel-by-pixel to an application-specific integrated circuit. The in-pixel circuitry provides a 1,000,000:1 dynamic range within a single frame, allowing the direct electron beam to be imaged while still maintaining single electron sensitivity. A 1.1 kHz framing rate enables rapid data collection and minimizes sample drift distortions while scanning. By capturing the entire unsaturated diffraction pattern in scanning mode, one can simultaneously capture bright field, dark field, and phase contrast information, as well as being able to analyze the full scattering distribution, allowing true center of mass imaging. The scattering is recorded on an absolute scale, so that information such as local sample thickness can be directly determined. This paper describes the detector architecture, data acquisition system, and preliminary results from experiments with 80–200 keV electron beams.

A trend toward greater body size in dizygotic (DZ) than in monozygotic (MZ) twins has been suggested by some but not all studies, and this difference may also vary by age. We analyzed zygosity differences in mean values and variances of height and body mass index (BMI) among male and female twins from infancy to old age. Data were derived from an international database of 54 twin cohorts participating in the COllaborative project of Development of Anthropometrical measures in Twins (CODATwins), and included 842,951 height and BMI measurements from twins aged 1 to 102 years. The results showed that DZ twins were consistently taller than MZ twins, with differences of up to 2.0 cm in childhood and adolescence and up to 0.9 cm in adulthood. Similarly, a greater mean BMI of up to 0.3 kg/m2 in childhood and adolescence and up to 0.2 kg/m2 in adulthood was observed in DZ twins, although the pattern was less consistent. DZ twins presented up to 1.7% greater height and 1.9% greater BMI than MZ twins; these percentage differences were largest in middle and late childhood and decreased with age in both sexes. The variance of height was similar in MZ and DZ twins at most ages. In contrast, the variance of BMI was significantly higher in DZ than in MZ twins, particularly in childhood. In conclusion, DZ twins were generally taller and had greater BMI than MZ twins, but the differences decreased with age in both sexes.

For over 100 years, the genetics of human anthropometric traits has attracted scientific interest. In particular, height and body mass index (BMI, calculated as kg/m2) have been under intensive genetic research. However, it is still largely unknown whether and how heritability estimates vary between human populations. Opportunities to address this question have increased recently because of the establishment of many new twin cohorts and the increasing accumulation of data in established twin cohorts. We started a new research project to analyze systematically (1) the variation of heritability estimates of height, BMI and their trajectories over the life course between birth cohorts, ethnicities and countries, and (2) to study the effects of birth-related factors, education and smoking on these anthropometric traits and whether these effects vary between twin cohorts. We identified 67 twin projects, including both monozygotic (MZ) and dizygotic (DZ) twins, using various sources. We asked for individual level data on height and weight including repeated measurements, birth related traits, background variables, education and smoking. By the end of 2014, 48 projects participated. Together, we have 893,458 height and weight measures (52% females) from 434,723 twin individuals, including 201,192 complete twin pairs (40% monozygotic, 40% same-sex dizygotic and 20% opposite-sex dizygotic) representing 22 countries. This project demonstrates that large-scale international twin studies are feasible and can promote the use of existing data for novel research purposes.

Residual stress in MEMS is of inherent importance in various respects. This study proposes a specific method using ANSYS including the birth and death method and combined with the optimal method (SCGM) to reduce the residual stresses during the CMOS fabrication process. The suitable cooling temperature for decreasing the residual stress is proposed and available. It demonstrates that the suitable parameter on the fabrication can reduce the residual stress in MEMS devices without any extra manufacturing process or external apparatus. The proposed method can expand to simulate the realistic MEMS model effectively.

Based on background information in this special issue of the journal, possible triage recommendations for the first 4 days following a nuclear detonation, when response resources will be limited, are provided. The series includes: modeling for physical infrastructure damage; severity and number of injuries; expected outcome of triage to immediate, delayed, or expectant management; resources required for treating injuries of varying severity; and how resource scarcity (particularly medical personnel) worsens outcome. Four key underlying considerations are: 1.) resource adequacy will vary greatly across the response areas by time and location; 2.) to achieve fairness in resource allocation, a common triage approach is important; 3.) at some times and locations, it will be necessary to change from “conventional” to “contingency” or “crisis” standards of medical care (with a resulting change in triage approach from treating the “sickest first” to treating those “most likely to survive” first); and 4.) clinical reassessment and repeat triage are critical, as resource scarcity worsens or improves. Changing triage order and conserving and allocating resources for both lifesaving and palliative care can maintain fairness, support symptomatic care, and save more lives. Included in this article are printable triage cards that reflect our recommendations. These are not formal guidelines. With new research, data, and discussion, these recommendations will undoubtedly evolve.

(Disaster Med Public Health Preparedness. 2011;5:S111-S121)