Book contents
- Vibration Monitoring of Induction Motors
- Vibration Monitoring of Induction Motors
- Copyright page
- Contents
- Preface
- About the Author
- Acknowledgements
- Biographies of Personnel in the Acknowledgements
- Nomenclature
- Acronyms and Abbreviations
- Relevant Units of Equivalence Useful for this Book
- 1 Vibration Monitoring of Induction Motors and Case Histories on Shaft Misalignment and Soft Foot
- 2 Rolling Element Bearings for Induction Motors
- 3 Types of Defects in Rolling Element Bearings
- 4 Introduction to Vibration Spectrum Analysis to Diagnose Faults in Rolling Element Bearings in Induction Motors
- 5 Industrial Case Histories on VSA to Diagnose Cage Faults in Rolling Element Bearings of SCIMs
- 6 Industrial Case Histories – VSA Detected Inner and Outer Race Faults in Rolling Element Bearings in SCIMS
- 7 Industrial Case Histories – VSA Diagnosed False Brinelling and Problems in Cylindrical Roller Bearings in SCIMs
- 8 Industrial Case Histories on VSA to Diagnose Miscellaneous Faults in Rolling Element Bearings in SCIMS
- 9 Industrial Case Histories on Vibration Measurements and Analysis Applied to Large Induction Motors with Sleeve Bearings
- 10 Industrial Case Histories on Magnetic Forces and Vibration from Induction Motors
- 11 Miscellaneous Industrial Case Histories on Vibration Analysis Applied to Induction Motor Drives
- 12 Overview of Key Features of Vibration Monitoring of SCIMs
- Index
- References
3 - Types of Defects in Rolling Element Bearings
Published online by Cambridge University Press: 17 February 2021
Book contents
- Vibration Monitoring of Induction Motors
- Vibration Monitoring of Induction Motors
- Copyright page
- Contents
- Preface
- About the Author
- Acknowledgements
- Biographies of Personnel in the Acknowledgements
- Nomenclature
- Acronyms and Abbreviations
- Relevant Units of Equivalence Useful for this Book
- 1 Vibration Monitoring of Induction Motors and Case Histories on Shaft Misalignment and Soft Foot
- 2 Rolling Element Bearings for Induction Motors
- 3 Types of Defects in Rolling Element Bearings
- 4 Introduction to Vibration Spectrum Analysis to Diagnose Faults in Rolling Element Bearings in Induction Motors
- 5 Industrial Case Histories on VSA to Diagnose Cage Faults in Rolling Element Bearings of SCIMs
- 6 Industrial Case Histories – VSA Detected Inner and Outer Race Faults in Rolling Element Bearings in SCIMS
- 7 Industrial Case Histories – VSA Diagnosed False Brinelling and Problems in Cylindrical Roller Bearings in SCIMs
- 8 Industrial Case Histories on VSA to Diagnose Miscellaneous Faults in Rolling Element Bearings in SCIMS
- 9 Industrial Case Histories on Vibration Measurements and Analysis Applied to Large Induction Motors with Sleeve Bearings
- 10 Industrial Case Histories on Magnetic Forces and Vibration from Induction Motors
- 11 Miscellaneous Industrial Case Histories on Vibration Analysis Applied to Induction Motor Drives
- 12 Overview of Key Features of Vibration Monitoring of SCIMs
- Index
- References
Summary
Chapter 3 presents an overview of the types and causes of defects which occur in rolling element bearings to support the case histories in Chapters 4 to 8.
- Type
- Chapter
- Information
- Vibration Monitoring of Induction MotorsPractical Diagnosis of Faults via Industrial Case Studies, pp. 63 - 74Publisher: Cambridge University PressPrint publication year: 2020
References
ISO 281:2007, Rolling Bearings – Dynamic Load Ratings and Rating Life, Geneva, ISO, 2007.Google Scholar
Bonnett, A. H. and Albers, T., Motor Bearing Systems, IEEE Industry Applications Magazine, 8 (5), 2002, pp. 58–73.Google Scholar
Bonnett, A. H. and Albers, T., Motor Bearing Systems for Forest Products Applications, IEEE Conf., Record, Annual Pulp and Paper Industry Technical Conference, 2001, pp. 96–110.Google Scholar
Bonnett, A. H., Cause and Analysis of Bearing Failures in Electrical Motors, IEEE Conf., Record of 39th PCIC Conference, 1992, pp. 87–95.CrossRefGoogle Scholar
NTN Corporation, Care and Maintenance of Bearings http://www.ntnglobal.com/en/products/catalog/pdf/3017E.pdf.Google Scholar
NSK New Bearing Doctor www.mx.nsk.com/downloads/americas_bearing/BearingDoctor_for_web.pdf.Google Scholar
Bearing Defects and Damage http://www.zkl.cz/en/for-designers/11-bearing-defects-and-damageGoogle Scholar
Timkin Bearing Damage Analysis with Lubrication Reference Guide https://www.timken.com/pdf/5892_Bearing%20Damage%20Analysis%20Brochure.pdf.Google Scholar
Hutchings, F. R. and Unterweiser, P. M., A Survey of the Causes of Failure of Rolling Bearings, from: Failure Analysis: The British Engine Technical Reports, Ed., American Society for Metals, 1981.Google Scholar
Vintr, Z. and Vintr, M., An Assessment of Mean Time between Failures for a Group of Rolling Bearings, IEEE Conference Record, 2011, International Conference on Quality, Risk Maintenance, and Safety Engineering, 2011, pp. 177–81.Google Scholar
Finley, W. R. and Howowanec, M. M., Optimal Induction Motor Bearing Selection, Annual Record of the IEEE 2003 Annual Pulp and Paper Industry Conference, 2003, pp. 29–41.Google Scholar
Howowanec, M. M., Evaluation of Antifriction Bearing Lubrication Methods on Motor Life Cycle Cost, 1996 IEEE Record of Annual Pulp and Paper Industry Conference, 1996, pp. 170–7.Google Scholar
Howowanec, M. M., Satisfactory Motor Bearing Service Life: A Review of Often Overlooked Design Considerations, IEEE Record of 1995 Annual Pulp and Paper Industry Conference, 1995, pp. 177–184.Google Scholar
Harris, T. A. and Kotzalas, M. N., Essential Concepts of Bearing Technology, fifth edition, CRC Press, ISBN: 13 978-0-8493-7183-7, 2007.Google Scholar
Taylor, J. I. and Kirkland, D. Wyndell, The Bearing Analysis Handbook, ISBN: 0-9640517-3-7, Vibration Consultants, VCI USA, 2004.Google Scholar
Taylor, J. I., The Vibration Analysis Handbook, second edition, VCI, ISBN: 0-9640517-2-9, 2003.Google Scholar
Wilcock, D. F. and Booser, E. R., Bearing Design and Application, McGraw-Hill, New York, ASIN: B0011VRU2Q, 1957.Google Scholar
Lugt, P. M., Grease Lubrication in Roller Bearings, Wiley & Sons Ltd, ISBN:978-1-118-35391-2, 2013.Google Scholar
Tallian, T., Rolling Contact Failure Through Lubrication, Journal of Institution of Mechanical Engineers, UK, 182 (3A), 1987.Google Scholar
Haughton, P. S., Ball and Roller Bearings, Applied Science Publishers Ltd, London, 1985.Google Scholar
Palmgren, A., Ball and Roller Bearing Engineering, third edition, Burbank, Philadelphia, 1959.Google Scholar
Juvinall, R. and Marshek, K., Fundamentals of Machine Component Design, second edition, John Wiley, New York, 1991.CrossRefGoogle Scholar
Hamrock, B., Jacobson, B. and Schmid, S., Fundamentals of Machine Elements, McGraw-Hill, New York, 1999.Google Scholar
Spotts, M. and Shoup, T., Design of Machine Elements, seventh edition, Prentice Hall, Englewood Cliffs, NJ, 1998.Google Scholar
de Souza, Romero et al., Premature Wear and Recurring Bearing Failures in an Inverter-Driven Induction Motor – Part I: Investigation of the Problem, IEEE Transactions on Industry Applications, 51 (6), 2015, pp. 4861–7.Google Scholar
de Souza, Romero et al., Premature Wear and Recurring Bearing Failures in an Inverter-Driven Induction Motor – Part II: The Proposed Solution, IEEE Transactions on Industry Applications, 51 (1), 2015, pp. 92–100.Google Scholar
Barker, S., Avoiding Premature Failure with Inverter Fed Induction Motors, Power Engineering Journal, 14 (4), 2000, pp. 182–9.Google Scholar
Hadden, T. et al., A Review of Shaft Voltages and Bearing Currents in EV and HEV Motors, 42nd Annual Conference of the IEEE Industrial Electronics Society, IECON, 2016, pp. 1578–83.CrossRefGoogle Scholar
Asefi, M. and Nazarzadeh, J., Survey on High Frequency Models of PWM Electric Dives for Shaft Voltage and Bearing Current Analysis, IET Electrical Systems in Transportation, 7 (3), 2017, pp. 179–89.Google Scholar
Oliver, J. A., Guerrero, G. and Goldman, J., Ceramic Bearings for Electric Motors, IEEE Industry Transactions Magazine, 33 (6), 2017, pp. 14–20.Google Scholar