Electric networks will experience deep changes due to the emergence of dispersed generation. Variability in power output is a characteristic of wind energy and increased penetration of wind power will present significant operational challenges in ensuring grid security and power quality. This paper addresses the integration of large wind farms into the grid through the beneficial role of superconducting magnetic energy storage (SMES) systems. Although originally conceived as a load-leveling device for nuclear power plants, today’s utility-industrial realities emphasize other applications of SMES in the development of wind energy. In the industrial section, concerns about power quality and stability have driven the development of a market for micro-SMES devices for power quality applications. The paper reviews the recent history of SMES, performs analysis in terms of the quantity of superconductor required and cost associated with both toroid and solenoid shaped coil using Bi-2223, YBCO and MgB2. The energy storage is optimized by properly designing the bandwidth of SMES. The ultimate aim of this paper is to influence the optimal design and configuration of SMES for land and offshore wind power generation and to propose a roadmap for the resolution of technical barriers related to the integration of wind energy to the electric grid.

We review the present state of the understanding and application of high temperature superconductor materials ranging from attempts to clarify pairing mechanisms on the energy scale of a few milli-electron-volts to their use to embody terra-kwh continental wide deployment within the electricity enterprise. Examples include the use of density functional theory to study the relative roles of spin-fluctuation and/or lattice vibration induced Cooper pairing to modelling the incorporation of long distance HTSC transmission cables within the same natural gas pipeline rights-of-way infrastructure now emerging worldwide.

Recently, the detection of non-bulk superconductivity with unexpectedly high onset-Tcs up to 49 K in Pr-doped CaFe2As2 [(Ca,Pr)122] single crystals and the report of a Tc up to 65 K in one-unit-cell (1UC) FeSe epi-films, offer an unusual opportunity to seek an answer to the question posed in the title. Through systematic compositional, structural, resistive, and magnetic investigations on (Ca,Pr)122 single crystals, we have observed a doping-level-independent Tc, the simultaneous appearance of superparamagnetism and superconductivity, large magnetic anisotropy, and the existence of mesoscopic-2D structures in these crystals, thus providing clear evidence consistent with the proposed interface-enhanced Tc in these naturally occurring rareearth-doped Fe-based superconductors, (Ca,R)122. Similar resistive and magnetic measurements were also made on the 3–4UC FeSe ultrathin epi-films. We have detected weak links in the Meissner state below 20 K, weakly coupled small superconducting patches between 20–45 K, and collective excitations of spin and/or superconducting nature between 45–80 K. The unusual frequency dependences of the diamagnetic moment observed in the films in different temperature ranges will be presented and their implications discussed.

Praseodymium doped CaFe2As2 (122 structure) and CaFeAs2 (112 structure) are characterized by modulated Low Magnetic Field Microwave Absorption (LFMA) spectroscopy. In both (Pr,Ca)122 and (Pr,Ca)112 structures, a strong hysteretic LFMA is found, with a TcH of ∼30 K and ∼26 K, respectively. However, in (Pr,Ca)122, measurements also show an unusual Narrow Peak (NP) LFMA signal appearing at higher temperatures, above the lower TcH superconducting state until a TcNP of 49 K. We associate this NP LFMA with interfacial superconductivity, which has been found previously by highly anisotropic magnetization measurements. Furthermore, the absence of NP in (Pr,Ca)112 correlates with the absence of an interfacial phase. These results give useful information about the microwave signature of interfacial superconductivity present in the (Pr,Ca)122 system, and may form a roadmap towards a stabilized high temperature superconducting phase in pnictides.

Combination of superconducting (SC) and ferromagnetic (FM) sheets into layered SC/FM composites allows to obtain metamaterials with unusual magnetic properties: the effective magnetic permeability along the sheets could be much higher than in the perpendicular direction. One can design the magnetic cloak consisting of a shell from SC/FM composite protecting its inner space against the penetration of a static magnetic field. Difference between such a device and a usual SC or FM shield will be in its un-detectability by magnetic sensors checking the field distribution outside the cloak. Thus it could be considered a magnetic invisibility cloak and one can think about using it e.g. for protecting a sensitive electronic circuitry in an electric machine.

We have prepared a series of SC/FM cloaks using commercial coated conductors as the superconducting elements and various kinds of ferromagnetic sheets as the ferromagnetic elements. Finite element calculation was utilized to optimize the architecture. Experimental testing of the cloaking ability in static magnetic field was performed by scanning the field distribution in vicinity of the cloak. Detectability in low frequency (< 100 Hz) AC magnetic fields was tested in an AC magnetization set-up allowing to see both screening and dissipation signals. Recording of magnetization loops allowed to analyze in detail the dynamics of field interaction with the cloak. Reduction of the detected magnetic signature due to the cloak was confirmed, however it is still not complete. Tests of various arrangements of superconducting and ferromagnetic materials allowed to identify the main problems hindering to achieve a perfect cloaking.