Skip to main content Accessibility help
×
Home

Hybrid modeling and control of ICPT system with synchronous three-phase triple-parallel Buck converter

  • Songcen Wang (a1), Xiaokang Wu (a1), Ying Yang (a2), Cong Zhu (a2), Zhen Wu (a2) and Chenyang Xia (a2)...

Abstract

Aiming at the influence of coupling coefficient variation on the output voltage of a high-power LCC-S topology inductively coupled power transfer (ICPT) system, a synchronous three-phase triple-parallel Buck converter is used as the voltage adjustment unit. The control method for the three-phase current sharing of synchronous three-phase triple-parallel Buck converter and the constant voltage output ICPT system under the coupling coefficient variation is studied. Firstly, the hybrid model consisting of the circuit averaging model of the three-phase triple-parallel Buck converter and the generalized state-space average model for the LCC-S type ICPT system is established. Then, the control methods for three-phase current sharing of the synchronous three-phase triple-parallel Buck converter and constant voltage output of ICPT system are studied to achieve the multi-objective integrated control of the system. Finally, a 3.3 kW wireless charging system platform is built, the experimental results have verified the effectiveness of the proposed modeling and control method, and demonstrated the stability of the ICPT system.

Copyright

Corresponding author

Author for correspondence: Chenyang Xia, School of Electrical and Power Engineering, China University of Mining and Technology, Xuzhou221116, China. E-mail: bluesky198210@163.com

References

Hide All
1.Xia, C, Zhu, W, Ma, N, Jia, R and Yu, Q (2018) A load identification method for ICPT system utilizing harmonics. Journal of Electrical Engineering & Technology 13, 21782186.
2.Li, Y, Sun, Y and Dai, X (2013) μ-Synthesis for frequency uncertainty of the ICPT system. IEEE Transactions on Industrial Electronics 60, 291300.
3.Madawala, UK and Thrimawithana, DJ (2011) A bidirectional inductive power interface for electric vehicles in V2G systems. IEEE Transactions on Industrial Electronics 58, 47894796.
4.Badr, BM, Somogyi-Csizmazia, R, Leslie, P and Delaney, KR (2017) Design of a wireless measurement system for use in wireless power transfer applications for implants. Wireless Power Transfer 4, 2132.
5.Zhang, Z, Zhang, B, Deng, B, Wei, X and Wang, J (2018) Opportunities and challenges of metamaterial-based wireless power transfer for electric vehicles. Wireless Power Transfer 5, 919.
6.Xia, C, Xie, G, Lin, K, Chen, G, Ren and Zhang, Y (2016) Study of dual resonance point characteristics and maximum output power of ICPT based on double LCL compensation. Proceedings of the CSEE 36, 52005209.
7.Xia, C, Wang, W, Chen, G, Wu, X, Zhou, S and Sun, Y (2017) Robust control for the relay ICPT system under external disturbance and parametric uncertainty. IEEE Transactions on Control Systems Technology 25, 21682175.10.1109/TCST.2016.2634502
8.Li, Y, Du, H, Yang, M and He, Z (2018) Two-Degree-of-Freedom h infinity robust control optimization for the IPT system with parameter perturbations. IEEE Transactions on Power Electronics 33, 1095410969.10.1109/TPEL.2018.2809725
9.Van, DPFFA, Castilla, M and Bauer, P (2013) Adaptive Sliding-Mode control for a Multiple-User inductive power transfer system without need for communication. IEEE Transactions on Industrial Electronics 60, 271279.
10.Narimani, M and Moschopoulos, G (2014) An investigation on the novel use of High-Power Three-Level converter topologies to improve Light-Load efficiency in low power DC/DC Full-Bridge converters. IEEE Transactions on Industrial Electronics 61, 56905692.10.1109/TIE.2014.2300063
11.Luo, B, Chen, L and Li, Y (2017) Investigation of output voltage control for the inductive power. Transactions of China Electrotechnical Society 32, 235242.
12.Zhang, X, Xu, J, Bao, B and Zhou, G (2016) Asynchronous-Switching Map-Based stability effects of circuit parameters in fixed Off-Time controlled buck converter. IEEE Transactions on Power Electronics 31, 66866697.
13.Hu, A P and Hussmann, S (2004) Improved power flow control for contactless moving sensor applications.IEEE Power Electronics Letters 2, 135138.10.1109/LPEL.2004.841311
14.Wang, J, Tzeng, L, Hsu, M and Jian, H (2018) A simple control scheme to avoid the sensing noise for the DC-DC buck converter with synchronous rectifier. IEEE Transactions on Industrial Electronics 65, 50865091.10.1109/TIE.2017.2772195
15.Orabi, M and Shawky, A (2015) Proposed switching losses model for integrated Point-of-Load synchronous buck converters. IEEE Transactions on Power Electronics 30, 51365150.10.1109/TPEL.2014.2363760
16.Hu, A P (2009) Modeling a contactless power supply using GSSA method. Proc. IEEE Int. Conf. Ind. Technol, 16.
17.Maksimovic, D and Zane, R (2007) Small-signal discrete-time modeling of digitally controlled PWM converters. IEEE Transactions on Power Electronics 22, 25522556.
18.Huang, X, Peng, Y and Li, Y (2013) Current balancing for three-phase buck-type interleaving parallel rectifier. Power Electronics 47, 8183.

Keywords

Related content

Powered by UNSILO

Hybrid modeling and control of ICPT system with synchronous three-phase triple-parallel Buck converter

  • Songcen Wang (a1), Xiaokang Wu (a1), Ying Yang (a2), Cong Zhu (a2), Zhen Wu (a2) and Chenyang Xia (a2)...

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed.