We assessed marine reservoir age R(t) for the costal area of the northwest Pacific using radiocarbon measurements of the annually banded coral core (Porites sp) collected on Ishigaki Island in southern Japan. Reservoir age R(t) during the early 1900s at the Pacific coast of Ishigaki Island ranged between 290 and 455 14C yr, with a weighted mean of 355 ± 25 14C yr (n=5, ±1 σ). The regional-specific ΔR, defined as 14C age difference of regional and world ocean surface layer, was 35 ± 25 14C yr (n=5, ±1σ) on average and increased between 1900 and 1950.

Faunal remains originating from terrestrial and marine mammals, and belonging to the same archaeological deposits were compared to evaluate the marine radiocarbon reservoir ages around the Hokkaido island, Japan. From five shell middens of different ages from the Jomon period (4900 BP) to the Ainu cultural period (800 BP), 107 animal bone samples were selected for radiocarbon measurements. The apparent age differences between Japanese deer and northern fur seal showed the clear effect of deep-water upwelling in this region. Our data showed relatively stable age differences from 4500 BP to 800 BP, with an estimated ΔR values around 380 14C yr. Results are consistent with previous estimation based on simulation models and oceanographic properties.

The Duvanny Yar cross-section located in the Lower Kolyma River valley of Northern Yakutia (69°N, 158°E, height above the Kolyma River level 55 m), has been studied and dated in detail by radiocarbon. The sequence mainly consists of sandy loam sediments with large syngenetic ice wedges. Their width at the top is 1–3.5 m. Allochthonous organic material occurs in high content, concentrating as 0.5–0.7 m lenses. Shrub fragments, twigs, and mammoth bones are accumulated in peaty layers. Through interpolation based on a series of 14C dates, dating of the host sediments provides an approximate age for the ice wedges. The 14C dates of various types of organic material are sometimes very close, but not all in agreement. Therefore, the dates do not accurately show the age of the δ18O and δD plots. A new approach is developed to a 14C dating strategy of syncryogenic sediments with high admixture of allochthonous organic material. The main purpose of this study is to consider detection of inversions or disturbances in the syngenetic permafrost sediment at the Duvanny Yar cross-section by 14C date series. Direct accelerator mass spectrometry (AMS) dating of the ice confirmed the relatively young age of ice wedges.

Reliable radiocarbon dating depends upon well-defined samples. We have been investigating whether or not reliable 14C dates can be obtained directly from sub-fossil insect cuticle or biochemical fractions derived from it. Initial carbon and nitrogen stable isotope measurements on sub-fossil insect chitin from species with known feeding behaviors found within a single site (St Bees, Cumbria) clustered in a manner reminiscent of trophic level effects seen in terrestrial ecosystems. Although this finding implied some chemical stability, the measurement of CN ratios from the same samples indicated compositional variability. In addition, 14C dates obtained from these same samples were different from dates obtained from plant macrofossils found at the same depth. We have experimented with protocols designed to biochemically reduce chitin to its principle carbohydrate component glucosamine with the aim of using this compound to generate reliable 14C dates. Solvent extractions of sub-fossil chitin were carried out to remove both endogenous and exogenous lipid-soluble materials. Base hydrolysis reactions designed to extract polypeptides retained surprisingly high levels of contaminating amino acids. Proteinase K enzyme treatment had little affect on the level of amino acid contamination. Strong acid hydrolysis reactions designed to depolymerize chitin to glucosamine yielded only 5% glucosamine. Clearly alternative methods of chitin depolymerization must be identified before the purification and 14C dating of glucosamine from sub-fossil chitin becomes practical.

We constructed a semi-automated system to transform carbonate samples to CO2, as a means to increase sample-processing capacity. The physico-chemical process includes hydrolysis of carbonate, quantification of the mass of carbon and CO2 collection in a glass ampoule. The system is computer-controlled and monitored, and all the data are stored. A single run of five consecutive samples requires about 3.5 hours. Measurements of 14C concentrations were made on samples of IAEA C-1 Carrara marble to test the reliability of this semi-automated system. These measurements have allowed the determination of the total system background and the memory effect of our system.

The probabilistic radiocarbon calibration approach, which largely has replaced the intercept method in 14C dating, is based on the so-called Bayes' theorem (Bayes 1763). Besides single-sample calibration, Bayesian mathematics also supplies tools for combining 14C results of many samples with independent archaeological information such as typology or stratigraphy (Buck et al. 1996). However, specific assumptions in the “prior probabilities”, used to transform the archaeological information into mathematical probability distributions, may bias the results (Steier and Rom 2000). A general technique for guarding against such a bias is “sensitivity analysis”, in which a range of possible prior probabilities is tested. Only results that prove robust in this analysis should be used. We demonstrate the impact of this method for an assumed, yet realistic case of stratigraphically ordered samples from the Hallstatt period, i.e. the Early Iron Age in Central Europe.

Icon painting in the Ukraine is rooted in the Byzantine culture, after the conversion to the Christian religion. During the medieval epoch, Kiev became the artistic center for highly skilled icon painters. The icons were painted on wooden boards, specially made for this purpose. Historic dating of some even well-known icons is uncertain or not precise. Here we present for the first time radiocarbon dates for selected icons. Both liquid scintillation counting (LSC) and accelerator mass spectrometry (AMS) dating methods were applied, allowing intercomparison.

A new sealed double tube combustion method was developed at Lawrence Livermore National Laboratory (LLNL) to extract carbon from modern steels and ancient iron artifacts. Iron samples were chemically pretreated with 10% nitric acid, vacuum sealed in 6 mm quartz tubes with CuO, vacuum sealed again inside 9 mm quartz tubes, and combusted at 1000 °C for a minimum of 10 hr. The resulting CO2 was graphitized routinely using hydrogen reduction (Vogel et al. 1989). After the initial phase of development, carbon yields of 100% were consistently obtained. The activities of two modern high carbon steels (treated as process blanks, manufactured using only coal as the carbon source) were determined to be 0.0077 ± 0.0009 (n = 12, ± 1 σ) for a 1.3% C steel and 0.0090 ± 0.0038 (n = 12, ± 1 σ) for a 1.9% C steel, indicating that very little contamination is introduced during the sample preparation process. Since the Iron Age began less than 5000 years ago, these background uncertainties should introduce errors of no more than ±30 years to the radiocarbon ages of actual artifacts. Two ancient iron artifacts of known date were analyzed and demonstrate that the new methodology can be used to obtain the correct date of manufacture for iron objects, provided that they are made exclusively using charcoal that was contemporaneous with the manufacture of the artifact. Since only 1 mg of carbon is required for accelerator mass spectrometry (AMS), very small iron samples can now be analyzed (50 mg of a 2.0% C iron or 1 g of a 0.1% C iron). We anticipate that this methodology will be particularly useful to archeologists who currently have to rely on context to date iron artifacts.

We present the current status of accelerator mass spectrometry (AMS) dating of iron artifacts at Seoul National University (SNU). In ancient iron production, charcoal was widely used as carbon for the smelting process, whereas coal is used in modern times. If reliable data could be obtained from carbon by using AMS, ancient iron artifacts could be traced to their production age. In normal acid treatment, it is not easy to extract carbon due to its colloidal property. The negative charge property of the carbon colloid, however, makes it possible for it to be precipitated with positive ions by dissolving the iron chemically. An extraction yield of the carbon incorporated in modern cast iron of about 70% is attained. More refined methods to increase the extraction rate are under progress for archaeological applications.

Smoothed curves are least-squares fitted to three sets of decadal radiocarbon calibration data from New Zealand and British Isles (AD 1725–1935) and western North America (AD 1145–1945). The curves are compared with each other and with a curve previously calculated from New Zealand data (AD 1335–1745). The smoothing procedure results in reduced standard deviations of the curves, but at the expense of time resolution. The comparison shows a variable 14C offset between the northern and southern hemispheres of 0–70 years (Southern Hemisphere older), and a Northern Hemisphere longitudinal variation of −20 to +60 years (British Isles generally older than western North America).

Two lake and bog sediments have been thoroughly studied using palynological and radiocarbon dating methods. These are the Lembolovskoye Lake section located in the southern part of the Karelian Ithmus and the Mshinskoye bog section located in the southwestern part of the Leningrad province. The data obtained allow us to reconstruct the main features of the vegetation cover evolution, the chronology for the appearance and a real distribution of the main arboreal species from the south of the Leningrad province to the north, and to construct curves of the paleoclimate parameter changes for the area under study. Thirty-six 14C dates were obtained for the Lembolovskoye Lake section (7 m thick). According to those dates, the organic gyttja formation in the lake began 9870 ± 170 BP. Spore-pollen spectra with high percentage of herbs, arborescent, and shrub-birch dated back to the Younger Dryas were found out in clay layers at a depth of 6.5 m. An appearance of spruce and alder pollen is dated at 6860 ± 120 and 7510 ± 150 BP, respectively. The maximal percentage of broad-leaved species falls on the first half of the Atlantic (AT-1). Thirty-two dates were obtained for the Mshinskoye bog section (6 m thick): from 60 : 70 to 9520 ± 170 BP (the last date fixed the beginning of peat formation); 12 palinozones from the Preboreal to the Subatantic were recognized there. The spruce and alder pollen began to appear 7520 ±110 and 7670 ± 130 BP, respectively. The maximal amount of broad-leaved species is observed at 4690 ± 80 BP. The detailed reconstruction of changes in vegetation communities during the Late Glacial and Holocene was correlated with paleoclimatic characteristics, which have been recontructed for the sections under study by using the information from a statistical method of spore-pollen data processing.

Beach rock is a good indicator of the past sea levels, as it is considered to have been formed within the range of intertidal zone. Radiocarbon dates of beach rocks collected from Iriomote Island, Ishigaki Island, and Miyako Island, in the southern part of the Nansei Islands, indicate that the beach rocks were formed between around 4000 BP and 400 BP. Late Holocene sea-level changes were revealed based on the elevations and 14C dates of the beach rocks. The results indicate that the sea level was similar to the present one for at least the past 4000 BP. Isotopic fractionations (δ13C) of the beach rocks were between +9.40% and −0.08%, suggesting a different origin for calcium carbonate.

Near-Eastern archaeology has long remained oblivious to radiocarbon dating as unique historical calendars brought about a perception that 14C dating is superfluous. Circular chronological reasoning may occur as a result. There is now strong 14C evidence that the early part of Egyptian history seems older than age assessments currently in vogue among scholars. It is vital to apply systematic and high-quality 14C dating to each and every excavation in the Near East to measure time with the same yardstick. Such a strategy will enable chronological comparison of different areas at an excavation site and also between sites and regions, independent of cultural deliberations. This is essential for proper interpretation of archaeological layers and association with data from other fields. Radiocarbon (14C) is the most common radiometric dating tool applied in archaeology, geosciences, and environmental research. Stringent quality control is required to build up a reliable 14C chronology for the historical periods in Near-Eastern contexts. Important aspects of quality control involve regular laboratory intercomparisons, transparent duplicate and triplicate analysis of selected samples, conventional versus accelerator mass spectrometry (AMS) (i.e. sample size), sample selection and association. Finally, bones may provide short-lived dates in important stratigraphic archaeological contexts.

Radiocarbon concentration measurements in tree rings from Upper Silesia indicate significantly lower 14C concentration as compared to the concentrations occurring in “clean air” areas. This phenomenon is known as the Suess effect and is caused by contamination with inactive carbon that originates from fossil fuels combustion. This effect is observed in large urban and industrial areas. Samples for the measurements presented in the paper were collected in some of the largest cities in Upper Silesia: Gliwice, Ruda Śląska, and Chorzów. The samples were annual tree rings (Populus nigra, Pinus silvestris) covering years 1965–1992 and the atmospheric CO2 collected weekly between December 1994 and December 1995.

Archaeological surveys conducted in the Negev and Sinai during the 20th century were commonly interpreted as representing short settlement periods interrupted by long gaps. The time factor was usually based on archaeological estimates rather than comprehensive physical dating. For example, the perceived age and time duration of “hole-mouth” pottery sherds and tabular flint scrapers became a source of circular reasoning to “date” sites and their “duration.” Thus, desert sites became to be perceived as temporary, seasonal, short-lived, while the cultures of desert populations were somehow undervalued. However, radiocarbon dating of desert sites from the Late Neolithic to the Early Bronze Age IV presents a very different scenario. The deserts of the Southern Levant exhibit a full sequence of settlement, a longer life span of individual sites, and a higher level of activity and creativity of the desert people. This paper describes the controversy and presents the 14C data that form the basis for the revised view.

The paper is compares the chronology of the monuments of the Scythian epoch located in the east and west of the Eurasian steppe zone on the basis of both archaeological and radiocarbon data. The lists of 14C dates for the monuments located in different parts of Eurasia are presented according to the periods of their existence. Generally, the 14C dates are confirmed the archaeological point of view and allow us to compare the chronological position of the European and Asian Scythian monuments on the united 14C time scale.

Chronology is the backbone of all history, as the flow of time is identical in scholarly and scientific fields, even in the Near East. Radiocarbon dating can provide an essential and unifying chronological basis across disciplines, despite precision limitations. This issue presents exciting new 14C developments in archaeological and environmental contexts, ranging from Proto-Neolithic cultures to historic earthquakes along the Dead Sea. Dark periods devoid of settlement in the deserts of the southern Levant seem to disappear with 14C dating. Significant new findings collectively indicate the need for major chronological revisions in the 4th and 3rd millennia BCE in Egypt and the Levant. The implications for the 2nd millennium BCE are not yet established, but the use of 14C dating in the Iron Age is finally beginning to focus on current controversies. The chronological way forward for Dynastic Egypt and the Levantine Bronze and Iron Ages is a multi-disciplinary approach based on detailed high-quality 14C series as a unifying time foundation to anchor archaeological, textual, and astronomical data.

It is well known that, during the widely used AAA pretreatment (de Vries and Barendsen 1954), alkali treatment is responsible for the incorporation of modern carbon due to the precipitation of atmospheric CO2 as carbonate. Until now, the last step of the experiment, consisting in acid treatment (most of the time with hydrochloric acid) was considered to be sufficient to eliminate all of lab contamination. But wood, peat and sediment present a complex molecular structure. During radiocarbon chemical treatments, functional groups still present in the molecules are likely to form ionic bonds with “modern” carbonates. These new chemical bonds resist a “classical” acid treatment and are responsible for rejuvenation. This short paper presents preliminary results for two common 14C cases: rejuvenation of a 0.4 pMC wood and of an Oxygen Isotope Stage 3 (OIS3) paleosol. For both cases, contamination due to incorporation of modern carbon during chemical treatment is evaluated and an alternative protocol is proposed.

We summarize the basic operation of accelerator mass spectrometry (AMS) systems used to measure radiocarbon and discuss the calculations used to convert AMS output to 14C data.